[1] Hosseini, S. A., Salari, D., Niaei, A. and Arefi Oskouei, S., “Physical–chemical property and activity evaluation of LaB0.5Co0.5O3 (B = Cr, Mn, Cu) and LaMnxCo1-xO3 (x = 0.1, 0.25, 0.5) nano perovskites in VOC combustion”, J. Ind. Eng. Chem., 19, 1903 (2013).
[2] Hosseini, S. A., Sadeghi, M. T., Alemi, A., Niaei, A., Salari, D. and Kafi Ahmadi, L., “Synthesis, characterization, and performance of LaZnxFe1-xO3 perovskite nanocatalysts for toluene combustion”, Chin. J. Catal.,31, 747 (2010).
[3] Lou, X. W., Deng, D., Lee, J., Feng, J. and Archer, L., “Self‐supported formation of needlelike Co3O4 nanotubes and their application as lithium‐ion battery electrodes”, Adv. Mater.,20, 258 (2008).
[4] Szegedi, A., Popova, A., Dimitrova, A., Cherkezova-Zheleva, Z. and Mitov, I., “Effect of the pretreatment conditions on the physico-chemical and catalytic properties of cobalt- and iron-containing Ti-MCM-41 materials”, Micropor. Mesopor. Mater.,136, 106 (2010).
[5] Konova, P., Stoyanova, M., Naydenov, A., Christoskova, St. and Mehandjiev, D., “Catalytic oxidation of VOCs and CO by ozone over alumina supported cobalt oxide”, Appl. Catal.: A., 298, 109 (2006).
[6] Song, O. and Zhang, Z. J., “Shape control and associated magnetic properties of spinel cobalt ferrite nanocrystals”, J. Am. Chem. Soc., 126, 6164 (2004).
[7] Sun, S. H. and Zeng, H., “Size-controlled synthesis of magnetite nanoparticles”, J. Am. Chem. Soc., 124, 8204 (2002).
[8] Zeng, H., Rice, P. M., Wang, S. X. and Sun, S. H. , “ Shape-controlled synthesis and shape-induced texture of MnFe2O4 nanoparticles”, J. Am. Chem. Soc.,126, 11458 (2004).
[9] Sun, S. H., Zeng, H., Robinson, D. B., Raoux, S. P., Rice, M., Wang, S. X. and Li, G. X. , “Monodisperse MFe2O4 (M = Fe, Co, Mn) nanoparticles”, J. Am. Chem. Soc., 126, 273(2004).
[10] Wyrwalski, F., Lamonier, J. F., Perez-Zurita, M. J., Siffert, S. and Aboukaı¨s, A., “Influence of the ethylenediamine addition on the activity, dispersion and reducibility of cobalt oxide catalysts supported over ZrO2 for complete VOC oxidation”, Catal. Lett., 108, 87 (2006).
[11] Hosseini, S. A., Niaei, A., Salari, D., Alvarez-Galvan, M. C. and Fierro, J. L. G., “Study of correlation between activity and structural properties of Cu-(Cr, Mn and Co)2 nano mixed oxides in VOC combustión”, Ceram. Int., 40, 6157 (2014).
[12] Hosseini, S. A., Alvarez-Galvan, M. C., Fierro, J. L. G., Niaei, A. and Salari, D., “MCr2O4 (M=Co, Cu and Zn) nanospinels for 2-propanol combustion: Correlation of structural properties with catalytic performance and stability”, Ceram. Int., 39, 9253 (2013).
[13] Hosseini, S. A. and Alvarez-Galvan, M. C., “Study of physical-chemical properties and catalytic activities of ZnCr2O4 spinel nano oxides obtained from different methods - Modeling the synthesis process by response surface methodology and optimization by genetic algorithm”, J. Taiwan Inst. Chem. Eng., 61,261 (2016).
[14] Hosseini, S. A., Salari, D., Niaei, A., Deganello, F., Pantaleo, G. and Hojati, P., “Chemical-physical properties of spinel CoMn2O4 nano-powders and catalytic activity in the 2-propanol and toluene combustion: Effect of the preparation method, Environ”, Sci. Health, Part A., 46, 291 (2011).
[15] Hosseini, S. A., Niaei, A. and Salari, D., “Preparation and characterization of nano- and non-nanoscale Co3O4 spinels obtained from different methods and study of their performance in combustion of aromatics from polluted air - A comparison with Pt/γ-Al2O3 performance”, Environ. Sci. Health, Part A., 47, 1728 (2012).
[16] Rivas, B., López-Fonseca, R., Jiménez-González, C., José, I. and Ortiz, G., “Synthesis, characterisation and catalytic performance of nanocrystalline Co3O4 for gas-phase chlorinated VOC abatement”, J. Catal., 281, 88 (2011).
[17] Shi, X., Han, S., Sanedrin, R. J., Zhou, F. and Selke, M., “Synthesis of cobalt oxide nanotubes from colloidal particles modified with a Co(III)-Cysteinato Precursor”, Chem. Mater.,14, 1897 (2002).
[18] Zavyalova, U., Nigrovski, B., Pollok, K., Langenhorst, F., Müller, B., Scholz, P. and Ondruschka, B., “Gel-combustion synthesis of nanocrystalline spinel catalysts for VOCs elimination”, Appl. Catal.: B., 83, 221 (2008).
[19] Solsona, B., Davies, T. E., Garcia, T., Va´zquez, I., Dejoz, A. and Taylor, S. H., “Total oxidation of propane using nanocrystalline cobalt oxide and supported cobalt oxide catalysts”, Appl. Catal.: B., 84, 176 (2008).
[20] Chen, X., Zhang, J., Huang, Y., Tong, Z., and Huang, M., “
Catalytic reduction of nitric oxide with carbon monoxide on copper-cobalt oxides supported on nano-titanium dioxide”,
J. Environ Sci.,
21, 1296 (2009).
[21] Alizadeh-Gheshlaghi, E., Shaabania, B., Khodayaric, A., Azizian-Kalandaraghd Y. and Rahimi, R., “Investigation of the catalytic activity of nano-sized CuO, Co3O4 and CuCo2O4 powders on thermal decomposition of ammonium perchlorate”, Powder Technol., 217, 330 (2012).
[22] Tang, Q., Wu, C., Qiao, R., Chen Y. and Yang, Y., “Catalytic performances of Mn–Ni mixed hydroxide catalysts in liquid-phase benzyl alcohol oxidation using molecular oxygen”, Appl. Catal: A., 403,136 (2011).
[23] Vodyankin, A., Kurina L. and Popov, V., “Multicomponent oxide catalysts of a deep oxidation of carbon monooxide”, Kinet. Catal.,40, 636 (1999).
[24] Chen, M. and Zheng, X., “The effect of K and Al over NiCo2O4 catalyst on its character and catalytic oxidation of VOCs”, J. Mol. Catal.: A.,221, 77, (2004).