[1] Toghyani, M., Rahimi, A. and Mirmohammadi, J., “Mathematical modeling and parameteric study of a dehydrogenation decoking process”, Apllied Catalysis, A: General, 489, 226 (2015)
[2] Finlayson, B. A., “Packed bed reactor analysis by orthogonal collocation”, Chemical Engineering Science, 26, 1081 (1971).
[3] Barnea, E. and Mednick, R. L., “A generalized approach to fluid dynamics of particulate systems, Part III: General correlation for the pressure drop through fixed beds of spherical particles”, The Chemical Engineering Journal, 15, 215 (1978).
[4] Suwanprasop, S., Eftaxias, A., Stuber, F., Polaert, I., Julcour-Lebigue, C. and Delmas, H., “Scale-up and modeling of fixed bed reactors for catalytic phenol oxidation over adsorptive active carbon”, Ind. Eng. Chem. Res., 44, 9513 (2005).
[5] Quan-Sheng, L., Zhi-Xin, Z. and Jing-Lai, Z., “Steady state and dynamic behavior of fixed bed catalytic reactor for fischer-tropsch synthesis”, Journal of Natural Gas Chemistry, 8 (2), 137 (1999).
[6] Megiris, C. E. and Butt, J. B., “Effects of poisoning on the dynamics of fixed bed reactors: Cyclic and temperature-increased operational policies”, Chemical Engineering Science, 43 (8), 2239 (1988).
[7] Schuurman, Y., “Aspects of kinetic modeling of fixed bed reactors”, Catalysis Today, 138, 15 (2008).
[8] Ibrahim, H. G., Al-Meshragi, M., Alshuiref, A. A., Alagta, A. R. and Edali, M. A., “Radial heat transport in packed beds-II: Mathematical modeling of heat transfer through packed beds at elevated pressure”, International Journal of Engineering and Applied Sciences, 4 (2), 24 (2013).
[9] Kolios, G., Frauhammer, J. and Eigenberger, G., “Auto thermal fixed bed reactor concepts”, Chemical Engineering Science, 55, 5945 (2000).
[10] Jesus, J. M., Santana, P. L. and Silva, F. V., “Different approaches in concentration-temperature cascade control of a fixed bed reactor for the phthalic anhydride synthesis”, Chemical Engineering Transactions, 32, 1387 (2013).
[11] Budman, H. and Silveston, P. L., “Control of periodically operated reactors”, Chemical Engineering Science, 63, 4942 (2008).
[12] Sorensen, J. P., “Experimental investigation of the optimal control of a fixed bed reactor”, Chemical Engineering Science, 32, 763 (1977).
[13] Clement, K., Jorgensen, S. B. and Sorensen, J. P., “Fixed bed reactor Kalman filtering and optimal control-II”, Chemical Engineering Science, 35, 1231 (1980).
[14] Reddy, R. K. and Joshi, J. B., “CFD modeling of pressure drop and drag coefficient in fixed beds: Wall effects”, Particuology, 8, 37 (2010).
[15] Lin, D. Q., Shi, W., Tong, H. F.,Van de Sandt, E. J. A. X, Boer, P., Ferreira, G. N. M. and Yao, S. J., “Evaluation and characterization of axial distribution in expanded bed: Liquid mixing and local effective axial dispersion”, Journal of Chromatography, A, 1393, 65 (2015).
[16] Farsi, M., Mazinani, S. and Jahanmiri, A., “Steady state operability characteristics of an adiabatic fixed bed reactor for methanol dehydration”, Iran J. Chem. Eng., 30 (4), 45 (2011).
[17] Sorensen, M. D. P., “Deactivation models by fitting the progression of temperature profiles-coking model for the MTG process in adiabatic reactors”, Chemical Engineering Science, 106, 126 (2014).
[18] Qihong, Z., Minheng, C. and Weikang, Y., “Studies of adiabatic fixed bed reactors: (I) Ignition of reactors”, Journal of Chemical Industry and Engineering (China), 2 (2), (1987).
[19] Schoneberger, J. C., Arellano-Garcia, H., Thielert, H., Korkel, S. and Wozny, G., “Optimal experimental design of a catalytic fixed bed reactor”, 18th European Symposium on Computer Aided Process Engineering-ESCAPE 18, (2008).
[20] Smeds, S., Sami, T. and Murzin, Y. D., “Gas phase hydrogenation of ethylbenzene over Ni: Comparison of different fixed bed reactors”, Applied Catalysis, A: General, 201, 55 (2000).
[21] Chen, S., Sun, A., Qin, Z. and Wang, J., “Reaction coupling of diethylbenzene dehydrogenation with water-gas shift over alumina-supported iron oxide catalysts”, Catalysis Communications, 4, 441 (2003).
[22] Hong, D. Y., Jhung, S. H., Vislovskiy, V. P., Chang, J. S., Yoo, J. S., Park, S. E. and Park, Y. H., “Dehydrogenation of alkylaromatics over supported vanadium oxide catalyst with carbon dioxide as soft oxidant”, Applied Chemistry, 8 (2), 572 (2004).
[23] Kamiguchi, S., Kondo, K., Kodomari, M. and Chihara, T., “Catalytic ring-attachement isomerization and dealkylation of diethylbenzene over halide clusters of group 5 and group 6 transition metals”, Journal of Catalysis, 223, 54 (2004).
[24] Forni, L. and Valerio, A., “Kinetics of diethylbenzene catalytic dehydrogenation”, Ind. Eng. Chem. Process Des. Develop., 10 (4), 552 (1971).
[25] Kotelnikov, G. R., Bespalov, V. P., Sidnev, V. B. and Kachalov, D. V., “Production and operation of dehydrogenation catalysts”, Catalysis in Industry, 1 (1), 66 (2009).
[26] Kaeding, W. W., Klosek, J. K. and Young, L. B., “Process for preparation of para-divinylbenzene”, US Patent, 4982030, (1991).
[27] Yu, B., Xu, T., Cong, H., Peng, Q. and Usman M., “Preparation of porous poly(styrene-divinylbenzene) microspheres and their modification with diazoresin for mix-mode HPLC separations”, Materials, 440 (10), 1 (2017).
[28] Ji, X., Griesing, F., Yan, R., Sun, B., Pauer, W., Zhu, M., Sun, Y. and Moritz H. U., “One-pot preparation of poly(styrene-co-divinylbenzene)/silver nanoparticles composite microspheres with tunable porosity and their catalytic degradation of methylene blue in aqueous solution”, RSC Advances, 7, 50176 (2017).
[29] Salek, P., Horak, D. and Hromadkova, J., “Novel prepation of monodisperse poly(styrene-co-divinylbenzene) microspheres by controlled dispersion polymerization”, Polymer Science, Series B, 60 (1), 9 (2018).