Materials synthesize and production
A. jafarizad; H. Hazrati; A.M. Jabbari
Volume 16, Issue 2 , June 2019, , Pages 95-102
Abstract
In this work, for eliminating the (RR1346), considered to be a waste in wastewater from dye industries electrochemical advanced oxidation process has been used. Graphene oxide coated carbon cloth (GO/CC) and Fe3O4 /GO coated carbon cloth (Fe3O4/GO/CC) electrodes has been fabricated by synthesized GO ...
Read More
In this work, for eliminating the (RR1346), considered to be a waste in wastewater from dye industries electrochemical advanced oxidation process has been used. Graphene oxide coated carbon cloth (GO/CC) and Fe3O4 /GO coated carbon cloth (Fe3O4/GO/CC) electrodes has been fabricated by synthesized GO and Fe3O4 nanoparticles. Characteristic properties such as surface morphology as the main reason of utilizing Fe2O3/GO/CC as electrodes has been investigated determined by various instrumental analysis including, Atomic Force Microscopy (AFM), Field Emission Scanning Electron Microscopy (FESEM), Cyclic Voltammetry (CV), Cathodic polarization, and also for investigating the process yield by utilization of mentioned electrodes, UV-vis spectrophotometric analysis has been used to determine dye concentration in sample waste water, after comparing fabricated electrodes removal efficiency in same time intervals, by determining the concentration of RR1346 dye in samples after oxidation process in different time intervals, results indicated better removal efficiency Fe3O4/GO/CC fabricated electrode than the other two electrodes, which this conclusion was proved by AFM,FESEM and UV-vis results.
Reaction Engineering, Kinetics and Catalysts,
Esmaeil Fatehifar; Asadollah Karimi; Reza Alizadeh; abbas jafarizad; mahmood jamili
Volume 13, Issue 3 , July 2016, , Pages 43-53
Abstract
In this paper, xCuO/CeO2–γAl2O3 nano-catalysts were successfully synthesized by precipitation from an aqueous solution which modified via ultrasonic waves. For characterization of xCuO/CeO2–γAl2O3 samples N2 adsorption results showed that the BET surface area of the CuO/CeO2–γAl2O3, ...
Read More
In this paper, xCuO/CeO2–γAl2O3 nano-catalysts were successfully synthesized by precipitation from an aqueous solution which modified via ultrasonic waves. For characterization of xCuO/CeO2–γAl2O3 samples N2 adsorption results showed that the BET surface area of the CuO/CeO2–γAl2O3, X-ray diffraction (XRD), scanning electron microscope (SEM) and energy dispersive X-rays (EDX dot-mapping) were used. The BET, XRD and SEM results indicate that CuO/CeO2-γAl2O3 particles are nano-structured catalysts. These catalysts (xCuO/CeO2–γAl2O3) have high specific surface area and finer particle that confirm SEM pictures. xCuO/CeO2-γAl2O3 catalysts compared to other previous synthesised catalysts for selective CO oxidation. The activity and selectivity of these catalysts obtained in the presence of rich hydrogen stream, with space velocity of 30,000 h−1 in the absence of CO2 and H2O. Results show that CuO/CeO2–γAl2O3 catalyst represents high CO conversion in low temperature (less than 120 ◦C), and selectivity of more than 63% at 100 ◦C. Also, results show that decreasing of CeO2 amount decreases selectivity of CO oxidation.