A. Etemadi; R. Alizadeh; M. Sirousazar
Abstract
Water and solid effective diffusivities and shrinkage were correlated for finite hollow cylinder-shaped apple samples during the candying operation in the osmotic solution. Experiments were conducted in the sucrose solution as an osmotic agent at different temperatures (i.e., 40, 50, and 60 °C) and ...
Read More
Water and solid effective diffusivities and shrinkage were correlated for finite hollow cylinder-shaped apple samples during the candying operation in the osmotic solution. Experiments were conducted in the sucrose solution as an osmotic agent at different temperatures (i.e., 40, 50, and 60 °C) and at a constant concentration of 55 °Brix. The effective diffusivities of water and solid were calculated by fitting the water loss and solid uptake experimental data to Fick’s second law and fractional calculus method, considering the shrinkage of the samples during the candying process. The obtained results exhibited that the volume of the apples reduced linearly by increasing the water loss. For above conditions of the candying process, water effective diffusivities with Fick second law were determined in the range of 3.7×10−10 m2/s–8.73×10−10 m2/s, and those with fractional calculus method were in the range of 2.75×10−10 m2/s–6.98×10−10 m2/s. The results indicated that the coefficient of determination for the fractional calculus method was more than the coefficient of determination for the Fick model. The value of the empirical parameter α for the Non-Fickian diffusion model was always higher than unity, meaning that the dehydration process had a super-diffusive mechanism.
Modeling and Simulation
N. Hadi; A. Niaei; r. alizadeh
Volume 15, Issue 2 , May 2018, , Pages 22-37
Abstract
The high silica Mn-substituted MFI metallosilicate catalyst with Si/Al molar ratio of 220 and Si/Mn molar ratio of 50 was successfully synthesized by hydrothermal method. The catalyst sample was appropriately characterized by XRD, FE-SEM, EDX and BET techniques. The Mn-substituted MFI metallosilicate ...
Read More
The high silica Mn-substituted MFI metallosilicate catalyst with Si/Al molar ratio of 220 and Si/Mn molar ratio of 50 was successfully synthesized by hydrothermal method. The catalyst sample was appropriately characterized by XRD, FE-SEM, EDX and BET techniques. The Mn-substituted MFI metallosilicate has not been reported as the potential catalyst for the methanol to propylene (MTP) reaction. The prepared catalyst was examined in the MTP reaction at the optimal operating conditions. Furthermore, for elucidating the flow field of the MTP fixed bed reactor, a three-dimensional (3D) reactor model was developed. A detailed reaction mechanism which was proposed for the MTP reaction over the Mn-impregnated MFI zeolite (Mn/H-ZSM-5) was properly employed. The reaction mechanism was integrated to a computational fluid dynamics (CFD) for simulating the kinetic, the energy equation and the hydrodynamics of the MTP process, simultaneously. The component distribution during proceeding of the MTP reaction was also simulated as a function of time on stream. The CFD modeling results were validated by the actual data which were obtained over the Mn-substituted MFI metallosilicate catalyst. With regard to the findings, the experimental data were in good agreement with the predicted values of the CFD modeling.
Transport Phenomena,
Sh. Ghodbanan; R. Alizadeh; S. Shafiei
Volume 13, Issue 2 , April 2016, , Pages 57-70
Abstract
In this study a developed model has been used to evaluate the paper drying process and examine the pocket dryer conditions of a multi-cylinder fluting paper machine. The model has been developed based on the mass and energy balance relationships in which the heat of sorption and its variations with paper ...
Read More
In this study a developed model has been used to evaluate the paper drying process and examine the pocket dryer conditions of a multi-cylinder fluting paper machine. The model has been developed based on the mass and energy balance relationships in which the heat of sorption and its variations with paper temperature and humidity changes have been taken into account. The applied model can be used to compute the drying parameters and analyze the pocket drying conditions. Furthermore, the effects of web tension on the heat transfer have been investigated. In the available operating range of the web tension, the overall mean heat transfer coefficient will be within 300-550 W/m2.K. The pocket air temperature was between 50 and 90 oC. The dew point temperature wasn’t close to the pocket air temperature and dew drop never happened during the dryer section. Based on the modeling result and using a novel technique, the maximum level for the exhaust air in the studied machine can be estimated to be 0.2 kg H2O/kg dry air. Result shows that increasing the exhaust humidity to the optimal level will lead to 4% reduction in the required energy and 20% rise in the heat recovery potential. Accordingly the specific heat consumption per evaporated water for the studied drying section can be reduced from 3.96 to 3.81 GJ per ton water.