Reaction Engineering, Kinetics and Catalysts,
M. Basiri; M. Rahimi; H. Babaei Mohammadi
Volume 13, Issue 2 , April 2016, , Pages 22-32
Abstract
The ultrasound-assisted (UA) soybean oil methanolysis using KOH as a catalyst was studied at different reaction conditions in a microreactor. Box–Behnken experimental design, with three variables, was performed and the effects of three reaction variables i.e. reaction temperature, catalyst concentration ...
Read More
The ultrasound-assisted (UA) soybean oil methanolysis using KOH as a catalyst was studied at different reaction conditions in a microreactor. Box–Behnken experimental design, with three variables, was performed and the effects of three reaction variables i.e. reaction temperature, catalyst concentration and the methanol-to-oil molar ratio on fatty acid methyl ester (FAME) yield were evaluated by method of analysis of variance (ANOVA) and multiple regression. A quadratic polynomial model was obtained to predict the methyl ester yield. A yield of 97.1% for methyl ester was obtained at the deduced optimal conditions: reaction temperature of 47 °C, KOH catalyst concentration of 1.29% (w/w) and methanol-to-oil molar ratio of 6:1. Validation experiments confirmed the validity of the predicted model. At the optimal operation condition for the ultrasonic process, a higher yield of methyl esters was obtained in comparison with that of the non-ultrasonic layout. The results show that UA transesterification in microreactor minimizes the reaction time and temperature, alcohol-to-oil molar ratio as well as energy consumption.
Energy
A. Mirahmad; S.M. Sadrameli; A. Jamekhorshid
Volume 13, Issue 2 , April 2016, , Pages 33-45
Abstract
Abstract Energy crisis is a major challenge in the current world. Latent heat thermal energy storage (LHTES) systems are known as equipment with promising performance by which thermal energy can be recovered. In the present study a comprehensive theoretical and experimental investigation is performed ...
Read More
Abstract Energy crisis is a major challenge in the current world. Latent heat thermal energy storage (LHTES) systems are known as equipment with promising performance by which thermal energy can be recovered. In the present study a comprehensive theoretical and experimental investigation is performed on a LHTES system containing PEG1000 as phase change material (PCM). Discussed topics can be categorized in three parts. At first, a one dimensional mathematical model is introduced for a heat exchanger containing flat slabs of PCM. To consider the latent heat of phase change, effective heat capacity is used in the model. Secondly, through eight experiments designed by using factorial method, effects of inlet air velocity and temperature on the outlet stream is investigated. The results proved that having a determined temperature difference between inlet air and the PCM in both hot and cold cycles can enhance the efficiency. Finally, the feasible applications of a LHTES system for controlling the temperature swing in a greenhouse is studied numerically and the results are compared with experimental values. As a result, by using this passive coolant system diurnal internal temperature can be reduced for 10 °C.