TY - JOUR ID - 133031 TI - Synthesis and Characterization of Waterglass-Based Silica Aerogel Under Heat Treatment for Adsorption of Nitrate from Water: Batch and Column Studies JO - Iranian Journal of Chemical Engineering(IJChE) JA - IJCHE LA - en SN - 1735-5397 AU - Tohfegar, E. AU - Moghaddas, J.S. AU - Sharifzadeh, E. AU - Esmaeilzadeh-Dilmaghani, S. AD - Faculty of Chemical Engineering, Sahand University of Technology, 51335-1996 Sahand, Tabriz, Iran AD - Sahand University of Technology AD - Polymer Research Center , Faculty of Petroleum and Chemical Engineering, Razi University , Kermanshah , AD - Chemical Engineering Faculty, Amirkabir University of Tevhnology Y1 - 2019 PY - 2019 VL - 16 IS - 4 SP - 53 EP - 72 KW - Silica Aerogel KW - Adsorption KW - Nitrate Removal Process KW - Water Treatment KW - Nano Structural Materials DO - 10.22034/ijche.2019.133031 N2 - In this work, hydrophobic silica aerogels were synthesized using sol-gel method and drying at ambient pressure. The surface morphology, pore size, and the presence of functional groups on the surface of the nanoparticles were analyzed using FE-SEM, TGA, FT-IR, and EDX, respectively. After calcination at 500 °C, the hydrophilic property of the adsorbents was evaluated by water contact angle measurements. The calcinated silica aerogels were used for adsorption of nitrate from aqueous solution in both batch and continuous processes. In the batch process, the effect of initial nitrate concentration, contact time, pH level, and adsorbent dosage were investigated. Results showed that the nitrate removal percentage increased with the decrement of the pH level and the initial nitrate concentration. On the other hand, increasing the contact time and the adsorbent dosage resulted in higher removal percentage. Accordingly, process optimization resulted in a nitrate removal of 92.2 %. Furthermore, it was found that the equilibrium results were in agreement with the Langmuir isotherm model better than with the Freundlich model and also the adsorption kinetics followed the pseudo-second-order model. In the continuous process, the effects of the input flow rate, the bed height, and the initial nitrate concentration were investigated. UR - https://www.ijche.com/article_133031.html L1 - https://www.ijche.com/article_133031_4404c601abdecd760e727b5e629e3a4d.pdf ER -