[1] Hadi, N., Niaei, A., Nabavi, S. R. and Farzi, A., “Kinetic study of methanol to propylene process on high silica H-ZSM5 catalyst”, Iranian J. Chem. Eng., 10 (4), 16 (2013).
[2] Hadi, N., Niaei, A., Nabavi, S. R., Alizadeh, R., Shirazi, M. N. and Izadkhah, B., “An intelligent approach to design and optimization of M-Mn/H-ZSM-5 (M: Ce, Cr, Fe, Ni) catalysts in conversion of methanol to propylene”, J. Taiwan Inst. Chem. Eng., 59, 173 (2016).
[3] Hadi, N., Niaei, A., Nabavi, S. R., Farzi, A. and Shirazi, M. N., “Development of a new kinetic model for methanol to propylene process on Mn/H-ZSM-5 catalyst”, Chem. Biochem. Eng. Q., 28, 53 (2014).
[4] Rostamizadeh, M. and Taeb, A., “Highly selective Me-ZSM-5 catalyst for methanol to propylene (MTP)”, J. Ind. Eng. Chem., 27, 297 (2015).
[5] Guo, W., Xiao, W. and Luo, M., “Comparison among monolithic and randomly packed reactors for the methanol-to-propylene process”, Chem. Eng. J., 207, 734 (2012).
[6] Guo, W., Wu, W., Luo, M. and Xiao, W., “Modeling of diffusion and reaction in monolithic catalysts for the methanol-to-propylene process”, Fuel Process. Technol., 108, 133 (2013).
[7] Alwahabi, S. M. and Froment, G. F., “Conceptual reactor design for the methanol-to-olefins process on SAPO-34”, Ind. Eng. Chem. Res., 43, 5112 (2004).
[8] Schoenfelder, H., Hinderer, J., Werther, J. and Keil, F. J., “Methanol to olefins: Prediction of the performance of a circulating fluidized-bed reactor on the basis of kinetic experiments in a fixed-bed reactor”, Chem. Eng. Sci., 49, 5377 (1994).
[9] Soundararajan, S., Dalai, A. and Berruti, F., “Modeling of methanol to olefins (MTO) process in a circulating fluidized bed reactor”, Fuel, 80, 1187 (2001).
[10] Chang, J., Zhang, K., Chen, H., Yang, Y. and Zhang, L., “CFD modelling of the hydrodynamics and kinetic reactions in a fluidised-bed MTO reactor”, Chem. Eng. Res. Des., 91, 2355 (2013).
[11] Zhuang, Y. Q., Gao, X., Zhu, Y. P. and Luo, Z. H., “CFD modeling of methanol to olefins process in a fixed-bed reactor”, Powder Technol., 221, 419 (2012).
[12] Zhu, L. T., Xie, L., Xiao, J. and Luo, Z. H., “Filtered model for the cold-model gas-solid flow in a large-scale MTO fluidized bed reactor”, Chem. Eng. Sci., 143, 369 (2016).
[13] Lu, B., Luo, H., Li, H., Wang, W., Ye, M., Liu, Z. and Li, J., “Speeding up CFD simulation of fluidized bed reactor for MTO by coupling CRE model”, Chem. Eng. Sci., 143, 341 (2016).
[14] Nijemeisland, M. and Dixon, A. G., “CFD study of fluid flow and wall heat transfer in a fixed bed of spheres”, AIChE J., 50, 906 (2004).
[15] Ding, J. and Gidaspow, D., “A bubbling fluidization model using kinetic theory of granular flow”, AIChE J., 36, 523 (1990).
[16] Tian, Z. F., Tu, J. Y. and Yeoh, G., “CFD studies of indoor airflow and contaminant particle transportation”, Particul. Sci. Technol., 25, 555 (2007).
[17] Coussirat, M., Guardo, A., Mateos, B. and Egusquiza, E.,“Performance of stress transport models in the prediction of particle to fluid heat transfer in packed beds”, Chem. Eng. Sci., 62, 6897 (2007).
[18] Salari, D., Niaei, A., Yazdi, P. C. and Derakhshani, M., “CFD flow and heat transfer simulation for empty and packed fixed bed reactor in catalytic cracking of naphtha”, Int. J. Chem. Biol. Eng., 1, 50 (2008).
[19] Shahhosseini, S., Alinia, S. and Irani, M., “CFD simulation of fixed bed reactor in fischer-tropsch synthesis of GTL technology”, Proceeding of The World Academy of Science Engineering and Technology, World Academy Science Publications, Berlin, Germany, 1, pp. 585-589 (2009).
[20] Guardo, A., Coussirat, M., Recasens, F., Larrayoz, M. and Escaler, X., “CFD study on particle-to-fluid heat transfer in fixed bed reactors: Convective heat transfer at low and high pressure”, Chem. Eng. Sci., 61, 4341 (2006).
[21] Jin, Y., Asaoka, S., Zhang, S., Li, P. and Zhao, S., “Reexamination on transition-metal substituted MFI zeolites for catalytic conversion of methanol into light olefins”, Fuel Process. Technol., 115, 34 (2013).
[22] Kim, Y., Kim, J. C., Jo, C., Kim, T. W., Kim, C. U., Jeong, S. Y. and Chae, H. J., “Structural and physicochemical effects of MFI zeolite nanosheets for the selective synthesis of propylene from methanol”, Microporous Mesoporous Mater., 222, 1 (2015).
[23] Hadi, N., Niaei, A., Nabavi, S. R., Shirazi, M. N. and Alizadeh, R., “Effect of second metal on the selectivity of Mn/H-ZSM-5 catalyst in methanol to propylene process”, J. Ind. Eng. Chem., 29, 52 (2015).
[24] Hadi, N., Alizadeh, R. and Niaei, A., “Selective production of propylene from methanol over nanosheets of metal-substituted MFI zeolites”, J. Ind. Eng. Chem., In press, (2017).
[25] Treacy, M. M. and Higgins, J. B., Collection of simulated XRD powder patterns for zeolites, 5th Revised Ed., Elsevier, (2007).
[26] Alwahabi, S. M. and Froment, G. F., “Single event kinetic modeling of the methanol-to-olefins process on SAPO-34”, Ind. Eng. Chem. Res., 43, 5098 (2004).