A

  • Abbasi, P. Optimization and Comparison of Ni and Cd Removal Using Zinc Powder with the Response Surface Methodology [Volume 17, Issue 4, 2020, Pages 3-20]

  • Abbasi, S. Synthesis of SnO2 and ZnO Nanoparticles and SnO2-ZnO Hybrid for the Photocatalytic Oxidation of Methyl Orange [Volume 12, Issue 3, 2015, Pages 96-105]

  • Abbasi, S. Thermal Conductivity of Water Based Nanofluids Containing Decorated Multi Walled Carbon Nanotubes with Different Amount of TiO2 Nanoparticles [Volume 12, Issue 1, 2015, Pages 30-40]

  • Abbasi, S. An experimental investigation on the effect of acid treatment of MWCNTs on the viscosity of water based nanofluids and statistical analysis of viscosity in prepared nanofluids [Volume 15, Issue 3, 2018, Pages 72-81]

  • Abbasi Souraki, B. Simulation of Leaching of Starch from Potato in a Batch Extractor [Volume 12, Issue 2, 2015, Pages 26-36]

  • Abdi, A. Application of artificial neural network in deoxygenation of water by glucoseoxidase immobilized in calcium alginate/MnO2 composite [Volume 15, Issue 3, 2018, Pages 82-93]

  • Abdollahi, A. Synthesis and Investigation of Stimuli-Responsive Amphiphilic Latex Nanoparticles by Seeded Emulsion Polymerization [Volume 17, Issue 1, 2020, Pages 79-89]

  • Abedin, H. Study of Light Wavelength Dependency in Red-Orange Spectrum on Continuous Culture of Synechocystis sp. PCC6803 [Volume 16, Issue 4, 2019, Pages 3-11]

  • Abedini, H. Effect of operating conditions on divinylbenzene production in diethyl benzene dehydrogenation reactor [Volume 15, Issue 4, 2018, Pages 93-104]

  • Abedini, H. Reactor modeling and kinetic parameters estimation for diethylbenzene (DEB) dehydrogenation reactions [Volume 16, Issue 3, 2019, Pages 23-36]

  • Abedzadegan, T. Comparison of Different Methods (Digestion, Combustion, Gasification and Pyrolysis) for Sludge Energy Recovery: A Case Study for Ekbatan’s Municipal Treatment Plant [Volume 16, Issue 1, 2019, Pages 70-83]

  • Abidemi, G. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]

  • Abimannan, P. Phase-transfer catalysis for synthesis of ethyl 2-(4-nitrophenoxy)acetate under sonication- kinetic aspects [Volume 13, Issue 2, 2016, Pages 80-87]

  • Abimannan, Pachaiyappan Synthesis of 1-(isopentyloxy)-4-nitrobenzene under ultrasound assisted liquid-liquid phase-transfer catalysis [Volume 13, Issue 3, 2016, Pages 54-62]

  • Abolhasani, Mahdieh Investigating the performance of an ultrasonic-assisted rotating packed bed reactor for micromixing efficiency enhancement [Volume 18, Issue 4, 2022, Pages 50-64]

  • Abou Qurn, R. Cyclic Voltammetry of Cobalt Chloride with L- Carrageenan (LK) Using Glassy Carbon Electrode [Volume 14, Issue 4, 2017, Pages 90-99]

  • Ader, F. Investigating the Effects of Hollow Graphene Oxide Nanoparticles on the Thermal/Mechanical Properties of Polymer Nanocomposites: Experimental, Analytical and Simulation Approaches [Volume 18, Issue 2, 2021, Pages 71-83]

  • Aghamiri, F. Effect of MgAl2O4 catalyst support synthesis method on the catalytic activity of nickel Nano catalyst in reverse water gas shift reaction [Volume 16, Issue 3, 2019, Pages 58-69]

  • Ahmadi Danesh Ashtian, H. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]

  • Ahmadpour, A. Investigation of spent caustic wastewater treatment through response surface methodology and artificial neural network in a photocatalytic reactor [Volume 15, Issue 1, 2018, Pages 46-72]

  • Akbari, A. Removal of Pb (II) From Wastewater Using Henna; Optimization of Operational Conditions [Volume 15, Issue 4, 2018, Pages 17-26]

  • Akbari, M.H. Increasing flow capacity and reducing drag in microtubes using drag-reducing polymer [Volume 17, Issue 2, 2020, Pages 70-87]

  • Akbarzadeh, Abolfazl Synthesis and characterization of doxorubicin coated with magnetic copolymer polycaprolactone-polyethylene glycol for use in the cancer treatment [Volume 18, Issue 4, 2022, Pages 37-49]

  • Alborzi, A. Modeling and Simulation of a Divided Wall Column for 1,3 Butadiene Purification [Volume 12, Issue 1, 2015, Pages 60-67]

  • Ale ebrahim, H. Catalytic reduction of SO2 with CH4 to elemental sulfur: A comparative analysis of alumina, copper-alumina and nickel-alumina catalysts [Volume 15, Issue 3, 2018, Pages 94-107]

  • Alibolandi, M. Production of Bio-Gasoline with High Octane Number, as a Renewable Transportation Biofuel, via Thermochemical Conversion of Castor Oil [Volume 17, Issue 3, 2020, Pages 3-23]

  • Alihemati, Z. Response Surface Methodology for Investigating the Effects of Hydrolysis Reaction Parameters on Molecular Structure and Performance of Polyvinyl Alcohol as Primary Suspending Agent [Volume 14, Issue 1, 2017, Pages 52-66]

  • Alimohammadi, Nemat Performance comparison of heterogeneous Pd-supported catalysts: Pd/ZSM-5, Pd/13X and Pd/Al₂O₃ for hydrogenation of benzene in gasoline [Volume 18, Issue 4, 2022, Pages 3-20]

  • Alipour, A. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]

  • Alizadeh, Omid Investigation of air injection impact on the thermal performance of helical tube with varying helix diameter: Downward Flow [Volume 19, Issue 2, 2022]

  • Alizadeh, R. Thermodynamic and Heat Transfer Evaluation of Pocket Drying Section in the Multi-Cylinder Dryers of Paper Machine [Volume 13, Issue 2, 2016, Pages 57-70]

  • Alizadeh, R. Fractional Calculus Method Applied To the Apple Rings Candying in Osmotic Drying Process [Volume 17, Issue 1, 2020, Pages 90-102]

  • Alizadeh, Reza Ultrasonic Assisted Synthesis and Characterization of xCuO/CeO2–γAl2O3 Nanoatalysts [Volume 13, Issue 3, 2016, Pages 43-53]

  • Almasi, A. Degradation of Diclofenac Sodium under Solar Light Irradiation by Photocatalytic Performance of ZnO and V2O5 [Volume 15, Issue 4, 2018, Pages 1-16]

  • Almasvandi, Mo. H. Waste water ammonia stripping intensification using microfluidic system [Volume 14, Issue 4, 2017, Pages 17-31]

  • Amarowicz, R. A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]

  • Amini, M. Application of Turbo-Expander for Greenhouse Gas and Air Pollutant Emissions Reduction Using Exergy and Economical Analysis [Volume 14, Issue 4, 2017, Pages 32-47]

  • Amirabedi, Parya Mathematical Modeling and Parameters Optimization of the Degradation of Acrylonitrile in Biofilters [Volume 18, Issue 3, 2021, Pages 3-15]

  • Amirkhani, L. Investigating the Influence of Nanoclosite Particles on the Mechanical Properties of Polystyrene Using Artificial Neural Networks [Volume 18, Issue 2, 2021, Pages 59-70]

  • Amirkhani, Leila Optimization of Candida rugosa lipase immobilization parameters on magnetic silica aerogel using adsorption method [Volume 13, Issue 3, 2016, Pages 19-31]

  • Amirkhani, Leila Synthesis and characterization of doxorubicin coated with magnetic copolymer polycaprolactone-polyethylene glycol for use in the cancer treatment [Volume 18, Issue 4, 2022, Pages 37-49]

  • Arabzadeh, R. Effect of silica particles on adhesion strength of polyvinyl chloride coatings on metal substrates [Volume 14, Issue 2, 2017, Pages 74-82]

  • Ardjmand, M. Microfluidic extraction of tannic acid from Quercus leaves [Volume 15, Issue 3, 2018, Pages 15-33]

  • Arinkoola, A. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]

  • Arjmand, R. Flocculation Behavior of Ultrafine Quartz and Magnetite as the Main Mineral Components of Iron Ore Tailings [Volume 18, Issue 2, 2021, Pages 3-18]

  • Arjomandi, H. Experimental, Kinetics and Isotherm Modeling of Carbon Dioxide Adsorption with 13X Zeolite in a fixed bed column [Volume 16, Issue 1, 2019, Pages 54-64]

  • Asadabadi, S. Adsorption Behavior of Short Alkyl Chain Imidazolium Ionic Liquidsat N-Butyl Acetate + Water Interface: Experiments and Modeling [Volume 12, Issue 2, 2015, Pages 59-74]

  • Asadollahi, M. Two Phase Flow Pressure Drop Calculation Using Homogeneous Equilibrium Model [Volume 16, Issue 3, 2019, Pages 84-92]

  • Asadollahzadeh, M. Stochastic Comparisons of Probability Distribution Functions with Experimental Data in a Liquid-Liquid Extraction Column for Determination of Drop Size Distributions [Volume 14, Issue 3, 2017, Pages 82-95]

  • Ashitosh, K. Development and Evaluation of the Magnesium Potassium Phosphate Cement Based Refractory [Volume 17, Issue 4, 2020, Pages 69-78]

  • Ashrafizadeh, .S. N. Demuification of Water-in-Oil Emulsions by Means of Dielectrophoresis [Volume 17, Issue 3, 2020, Pages 24-40]

  • Ashrafizadeh, S. N. Dehydration of Natural Gas Using Synthesized Chabazite Zeolite Membranes [Volume 12, Issue 1, 2015, Pages 13-21]

  • Ashrafmansouri, ُS.Saba Predicting Ionic Liquids’ Second-Order Derivative Properties based on a Combination of SAFT-γ EoS and a GC Technique [Volume 18, Issue 1, 2021, Pages 56-70]

  • Atitebi, Z. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]

  • Azadi, P. Improvement of gas separation properties of polyurethane membrane using plasma grafting [Volume 14, Issue 3, 2017, Pages 19-30]

  • Azami, H. Biofouling Behavior on Forward Osmosis Using Vertically Aligned CNT Membrane on Alumina [Volume 16, Issue 2, 2019, Pages 1-13]

  • Azimi, M. Methanol crossover and selectivity of nafion/heteropolyacid/montmorillonite nanocomposite proton exchange membranes for DMFC applications [Volume 14, Issue 3, 2017, Pages 65-81]

  • Azimi, N. Cooling Enhancement of a Photovoltaic Panel Through Ferrofluid Stimulation Using a Magnetic-Wind Turbine [Volume 16, Issue 4, 2019, Pages 35-52]

  • Azizi, M. Anticancer and Antioxidant Properties of Ag NPs Coated with BSA NPs [Volume 12, Issue 1, 2015, Pages 22-29]

B

  • Babaei, S. Effect of electrokinetic on biodegradation of fluorene and phenanthrene in soil [Volume 13, Issue 2, 2016, Pages 71-79]

  • Babaei Mohammadi, H. Ultrasound-Assisted Biodiesel Production in microreactors [Volume 13, Issue 2, 2016, Pages 22-32]

  • Babic, S.Z. DESULFURIZATION AND DEMETALIZATION OF USED ENGINE OIL IN LABORATORY SCALE [Volume 15, Issue 1, 2018, Pages 73-88]

  • Bahoosh, M. Comparison the performance of different reverse osmosis membrane modules by CFD modeling [Volume 16, Issue 1, 2019, Pages 101-116]

  • Bahrami, A. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]

  • Bahramian, A. Hazards Identification and the Units Assessment of a the Water Treatment Plant Against Pathogenic and Biotoxin Threats Affecting by Physicochemical Parameters [Volume 17, Issue 4, 2020, Pages 33-48]

  • Bahramian, A. R. Hydrodynamic Characteristics of Dense Conical Fluidized Bed: CFD Simulation and Experimental Verification [Volume 12, Issue 1, 2015, Pages 42-59]

  • Bahramian*, A. R. CFD Insight of the Flow Dynamics and Velocity Fields in a Gas Turbine Combustor with a Swirl Flame [Volume 12, Issue 2, 2015, Pages 37-49]

  • Bahri Rasht Abadi, M. M Parasitic Effect of Tube Wall Longitudinal Heat Conduction on Cryogenic Gas Temperature [Volume 14, Issue 1, 2017, Pages 15-25]

  • Bahri Rasht Abadi, M. M Transient thermal study of recuperative tube in tube heat exchanger operating in refrigeration system using experimental test and mathematical simulation [Volume 14, Issue 3, 2017, Pages 3-18]

  • Bakeri, Gh. Fabrication and characterization of polycarbonate/titanium oxide nanotubes mixed matrix membranes for efficient removal of cadmium and copper from aqueous solution [Volume 14, Issue 2, 2017, Pages 59-73]

  • Bakhshi, Roohallah Fabrication and characterization of polysulfone-graphene oxide mixed matrix membranes for natural gas treatment [Volume 19, Issue 2, 2022]

  • Bakhtiari, O. Modification of Mixed Matrix Membranes' Famous Permeability Prediction Models by Considering the Formed Voids Around Nonporous Fillers [Volume 17, Issue 3, 2020, Pages 53-73]

  • Baniamer, M. Degradation of Diclofenac Sodium under Solar Light Irradiation by Photocatalytic Performance of ZnO and V2O5 [Volume 15, Issue 4, 2018, Pages 1-16]

  • Barzegari, A. Fabrication of Chitosan-Polyethylene Oxide Electrospun Nanofibrous Mats Containing Green Tea Extract [Volume 15, Issue 2, 2018, Pages 65-77]

  • Barzin, J. Production and Characterization of Gelatine Based Electro-spun Nano-fibres as Burn Wound Dressings [Volume 14, Issue 1, 2017, Pages 3-14]

  • Basiri, M. Investigation of Liquid–Liquid Two-Phase Flow Pattern in Microreactors for Biodiesel Production [Volume 12, Issue 3, 2015, Pages 32-40]

  • Basiri, M. Ultrasound-Assisted Biodiesel Production in microreactors [Volume 13, Issue 2, 2016, Pages 22-32]

  • Bayat, Mahdi Enhancement of Hydrogen and Methanol Production using a Double Fluidized-bed Two Membranes Reactor [Volume 13, Issue 3, 2016, Pages 3-18]

  • Bayat, Mahdi Simultaneous high hydrogen content-synthesis gas production and in-situ CO2 removal via sorption-enhanced reaction process: modeling, sensitivity analysis and multi-objective optimization using NSGA-II algorithm [Volume 13, Issue 4, 2016, Pages 71-95]

  • Bazargan, M. Dynamic Behavior of an Oil Droplet Adhered to the Wall Surface in a Channel Flow by the Lattice Boltzmann Method [Volume 15, Issue 1, 2018, Pages 35-48]

  • Behnamfard, A. Flocculation Behavior of Ultrafine Quartz and Magnetite as the Main Mineral Components of Iron Ore Tailings [Volume 18, Issue 2, 2021, Pages 3-18]

  • Beigzadeh, R. Experimental and CFD Study of the Tube Configuration Effect on the Shell-Side Thermal Performance in a Shell and Helically Coiled Tube Heat Exchanger [Volume 12, Issue 2, 2015, Pages 13-25]

  • Beigzadeh, R. The CFD Provides Data for Adaptive Neuro-Fuzzy to Model the Heat Transfer in Flat and Discontinuous Fins [Volume 16, Issue 2, 2019, Pages 57-69]

  • Beigzadeh, R. Computational fluid dynamics study and GA modeling approach of the bend angle effect on thermal-hydraulic characteristics in zigzag channels [Volume 16, Issue 3, 2019, Pages 70-83]

  • Beigzadeh, R. Developing genetic algorithm-based neural networks and sensitivity analysis for thermal conductivity of natural gases [Volume 17, Issue 2, 2020, Pages 44-55]

  • Beygi-Khosrowshahi, Younes High-performance hydroxyapatite scaffold combined with selenium and reduced graphene oxide for bone regeneration applications [Volume 19, Issue 1, 2022]

  • Biswas, Sh. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]

  • Boulaqhi, Shirin Simulation, Control and Experimental Analysis of 1,3Butadiene Purification Unit [Volume 13, Issue 4, 2016, Pages 33-45]

C

  • Chegini, S. CO2 biofixation by Dunaliella Salina in batch and semi-continuous cultivations, using hydrophobic and hydrophilic poly ethylene (PE) hollow fiber membrane photobioreactors [Volume 13, Issue 1, 2016, Pages 47-59]

  • Cheraghipoor, M. Incorporation of Metal Oxide on Mica Flakes as a Green Pearlescent Pigment: Preparation and Analysis [Volume 17, Issue 2, 2020, Pages 34-43]

  • Curteanu, silvia Liquid-liquid equilibrium data prediction using large margin nearest neighbor [Volume 13, Issue 4, 2016, Pages 14-32]

D

  • Dadban, M. Modification of Montmorillonite and Prediction of Polymer/Clay Affinity Using Surface Properties and Lattice Model [Volume 12, Issue 3, 2015, Pages 41-54]

  • Darvishi, P. A three-dimensional mathematical model for drug delivery from drug-eluting stents [Volume 12, Issue 4, 2015, Pages 15-27]

  • Dashtestani, F. Anticancer and Antioxidant Properties of Ag NPs Coated with BSA NPs [Volume 12, Issue 1, 2015, Pages 22-29]

  • Dashti, A. Synthesis and Investigation of Stimuli-Responsive Amphiphilic Latex Nanoparticles by Seeded Emulsion Polymerization [Volume 17, Issue 1, 2020, Pages 79-89]

  • Davoodbeygi, Y. Medium Temperature Shift Reaction Over Copper-Ceria catalyst in Fixed-Bed and Microchannel Reactors [Volume 18, Issue 1, 2021, Pages 46-51]

  • Davoodbeygi, Y. Investigation of the effect of DamKohler and Stanton non-dimensional numbers on the stability of continuous stirred tank reactors [Volume 18, Issue 2, 2021, Pages 48-58]

  • Dehestani, M. Stability and Rheological Behavior of Sulfonated Polyacrylamide/ Laponite Nanoparticles Dispersions in Electrolyte Media [Volume 14, Issue 3, 2017, Pages 41-54]

  • Dehghani, M. R. Observations of Sludge Formation in Group I Base Stock for Lubricants and Thermodynamic Modeling with the SAFT Equation of State [Volume 14, Issue 2, 2017, Pages 33-47]

  • Dehghan Lotfabad, A. Bubble formation on a single orifice in a gas solid fluidized bed using digital image analysis [Volume 13, Issue 1, 2016, Pages 60-72]

  • Dehghanzadeh, Reza Mathematical Modeling and Parameters Optimization of the Degradation of Acrylonitrile in Biofilters [Volume 18, Issue 3, 2021, Pages 3-15]

  • Delavar, M. Fabrication and characterization of polycarbonate/titanium oxide nanotubes mixed matrix membranes for efficient removal of cadmium and copper from aqueous solution [Volume 14, Issue 2, 2017, Pages 59-73]

  • Derakhshanfard, F. Investigating the Influence of Nanoclosite Particles on the Mechanical Properties of Polystyrene Using Artificial Neural Networks [Volume 18, Issue 2, 2021, Pages 59-70]

E

  • Ealehi, Ehsan Application of ANFIS and Sobol approaches for optimization and sensitivity assessment of triglyceride biosorption from blood serum [Volume 19, Issue 1, 2022]

  • Ebadi Amooghin, A. Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]

  • Ebrahimi, Nadereh Golshan Relationship between the Microstructure and Gas Transport Properties of Polyurethane/Polycaprolactone Blends [Volume 13, Issue 3, 2016, Pages 78-88]

  • Ekrami-Kakhki, M. S. Thermal Conductivity of Water Based Nanofluids Containing Decorated Multi Walled Carbon Nanotubes with Different Amount of TiO2 Nanoparticles [Volume 12, Issue 1, 2015, Pages 30-40]

  • Emami Satellou, A. A. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]

  • Entezari, K. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering [Volume 18, Issue 1, 2021, Pages 3-15]

  • Esfandiari, N. Effect of Solvent on the Optimal Thermodynamic Conditions of Ternary System (CO2, Alcohol, Ampicillin) in GAS Process [Volume 17, Issue 1, 2020, Pages 37-46]

  • Esfandiari, Nadia Determining the Optimal Thermodynamic Conditions of Ternary System Containing (CO2, solvent, 5-Fluorouracil) in GAS Process [Volume 19, Issue 1, 2022]

  • Esmaeilzadeh-Dilmaghani, S. Synthesis and Characterization of Waterglass-Based Silica Aerogel Under Heat Treatment for Adsorption of Nitrate from Water: Batch and Column Studies [Volume 16, Issue 4, 2019, Pages 53-72]

  • Etebarian, M. Prediction of true critical temperature and pressure of binary hydrocarbon mixtures: A Comparison between the artificial neural networks and the support vector machine [Volume 16, Issue 2, 2019, Pages 14-40]

  • Etemadi, A. Fractional Calculus Method Applied To the Apple Rings Candying in Osmotic Drying Process [Volume 17, Issue 1, 2020, Pages 90-102]

  • Etesami, N. Adsorption and Desorption Process of Chromium Ions Using Magnetic Iron Oxide Nanoparticles and Its Relevant Mechanism [Volume 14, Issue 3, 2017, Pages 31-40]

  • Etesami, N. Effect of Electrohydrodynamic (EHD) on the Drying Rate of Polymer Films Based on the Heat and Mass Transfer [Volume 17, Issue 3, 2020, Pages 41-52]

F

  • Fadhil, S. Modeling of Nanofiltration of Low Concentration Pb(II) Aqueous Solutions Using a Coupled Concentration Polarization and Pore Flow Model [Volume 16, Issue 4, 2019, Pages 12-22]

  • Fakhroleslam, M. Prediction of the Effect of Polymer Membrane Composition in a Dry Air Humidification Process via Neural Network Modeling [Volume 13, Issue 1, 2016, Pages 73-83]

  • Fallah, N. Investigation of spent caustic wastewater treatment through response surface methodology and artificial neural network in a photocatalytic reactor [Volume 15, Issue 1, 2018, Pages 46-72]

  • Farahbod, F. Synthesis of SnO2 and ZnO Nanoparticles and SnO2-ZnO Hybrid for the Photocatalytic Oxidation of Methyl Orange [Volume 12, Issue 3, 2015, Pages 96-105]

  • Faraji, H. CFD Modeling of Hydrocarbon-Air System Hydrodynamics in Three Types of Column Reactors [Volume 17, Issue 1, 2020, Pages 47-64]

  • Farajzadeh, S. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]

  • Farhadi, F. CFD simulation for segregation behavior of a ternary mixture in a bubbling fluidized bed: effect of solid wall boundary condition [Volume 15, Issue 3, 2018, Pages 53-71]

  • Faridvand, Ramin Preparation of Flame Retardant Polystyrene via In-Situ Bulk Polymerization Method and Evaluation of its Flammability Properties [Volume 13, Issue 4, 2016, Pages 62-70]

  • Farzaneh, V. Hydroconversion of Furfural over Cu-Cr/SiO2 Nanocatalysts: A Comparative Study [Volume 15, Issue 2, 2018, Pages 38-51]

  • Fasihi, M. Effect of silica particles on adhesion strength of polyvinyl chloride coatings on metal substrates [Volume 14, Issue 2, 2017, Pages 74-82]

  • Fatehifar, Esmaeil Ultrasonic Assisted Synthesis and Characterization of xCuO/CeO2–γAl2O3 Nanoatalysts [Volume 13, Issue 3, 2016, Pages 43-53]

  • Fathollahi, Manoochehr Optimization of Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide based respiratory air Tablets Using Taguchi Method [Volume 18, Issue 4, 2022, Pages 82-98]

  • Fattahi, M. Enhancing Photocatalytic Activity of Nitrogen Doped TiO2 for Degradation of 4-Chlorophenol under Solar Light Irradiation [Volume 15, Issue 3, 2018, Pages 3-14]

  • Fatthi, Sohrab Performance comparison of heterogeneous Pd-supported catalysts: Pd/ZSM-5, Pd/13X and Pd/Al₂O₃ for hydrogenation of benzene in gasoline [Volume 18, Issue 4, 2022, Pages 3-20]

  • Fauzi Ismail, A. Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]

  • Fazeli, N. Optimization of Synthesis of Expandable Polystyrene by Multi-Stage Initiator Dosing [Volume 13, Issue 1, 2016, Pages 20-31]

  • Fazeli, N. Production and Characterization of Gelatine Based Electro-spun Nano-fibres as Burn Wound Dressings [Volume 14, Issue 1, 2017, Pages 3-14]

  • Feyzi, F. Observations of Sludge Formation in Group I Base Stock for Lubricants and Thermodynamic Modeling with the SAFT Equation of State [Volume 14, Issue 2, 2017, Pages 33-47]

  • Feyzi, M. An optimization study by response surface methodology (RSM) on viscosity reduction of residue fuel oil exposed ultrasonic waves and solvent injection [Volume 13, Issue 1, 2016, Pages 3-19]

  • Feyzi, M. Biodiesel production from soybean oil using ionic liquid as a catalyst in a microreactor [Volume 15, Issue 1, 2018, Pages 102-114]

  • Foruzanfar, R. Stability and Rheological Behavior of Sulfonated Polyacrylamide/ Laponite Nanoparticles Dispersions in Electrolyte Media [Volume 14, Issue 3, 2017, Pages 41-54]

G

  • Ganji, Fariba Transdermal Delivery of Desmopressin Acetate from Water-in- Oil Nano/submicron Emulsion Systems [Volume 13, Issue 4, 2016, Pages 1-13]

  • Ganjizade, A. Demuification of Water-in-Oil Emulsions by Means of Dielectrophoresis [Volume 17, Issue 3, 2020, Pages 24-40]

  • Ghaderi, A. Synthesis of SnO2 and ZnO Nanoparticles and SnO2-ZnO Hybrid for the Photocatalytic Oxidation of Methyl Orange [Volume 12, Issue 3, 2015, Pages 96-105]

  • Ghaderi, E. Experimental Study and CFD Modeling of the Ohmic Heating Process in a Static Two-Phase Biosolid – Liquid System [Volume 12, Issue 2, 2015, Pages 75-87]

  • Ghadi, A. CFD Study of Concave Turbine [Volume 16, Issue 2, 2019, Pages 103-118]

  • Ghaemi, A. Prediction of Red Mud Bound-Soda Losses in Bayer Process Using Neural Networks [Volume 13, Issue 2, 2016, Pages 46-56]

  • Ghaemi, A. Experimental, Kinetics and Isotherm Modeling of Carbon Dioxide Adsorption with 13X Zeolite in a fixed bed column [Volume 16, Issue 1, 2019, Pages 54-64]

  • Ghaemi, Ahad Evaluation of Silica gel adsorbent potential for carbon dioxide capture: experimental and modeling [Volume 18, Issue 4, 2022, Pages 65-81]

  • Ghaheri, L. Biofouling Behavior on Forward Osmosis Using Vertically Aligned CNT Membrane on Alumina [Volume 16, Issue 2, 2019, Pages 1-13]

  • Ghanbari Pakdehi, Sh. An Empirical Correlation to Predict the Ignition Delay Time for Some Hydrocarbon Fuels [Volume 13, Issue 1, 2016, Pages 84-97]

  • Ghasemi, Ismaeil Polysulfone/ Carbon Nanotubes Asymmetric Nanocomposite Membranes: Effect of Nanotubes Surface Modification on Morphology and Water Permeability [Volume 12, Issue 4, 2015, Pages 69-83]

  • Ghasemi, M. Synthesis of a high characteristics activated carbon from walnut shell for the removal of Cr (VI) and Fe (II) from aqueous solution: single and binary solutes adsorption [Volume 12, Issue 4, 2015, Pages 28-51]

  • Ghasemi, S. Flocculation Behavior of Ultrafine Quartz and Magnetite as the Main Mineral Components of Iron Ore Tailings [Volume 18, Issue 2, 2021, Pages 3-18]

  • GhasemiKafrudi, E. Application of Turbo-Expander for Greenhouse Gas and Air Pollutant Emissions Reduction Using Exergy and Economical Analysis [Volume 14, Issue 4, 2017, Pages 32-47]

  • Ghasemkhani, Hamid Drying Apple Slices in a Rotating-Tray Convective Dryer: A Study on Dehydration Characteristics and Qualitative Attributes [Volume 18, Issue 3, 2021, Pages 16-32]

  • Ghashghaee, M. Hydroconversion of Furfural over Cu-Cr/SiO2 Nanocatalysts: A Comparative Study [Volume 15, Issue 2, 2018, Pages 38-51]

  • Ghavipanjeh*, F. Biological Conversion of Normal Chain Octadecane by Native Microbial Consortia [Volume 12, Issue 2, 2015, Pages 50-58]

  • Ghazanchaie, S. Investigating the Influence of Nanoclosite Particles on the Mechanical Properties of Polystyrene Using Artificial Neural Networks [Volume 18, Issue 2, 2021, Pages 59-70]

  • Ghazitabatabaei, Z. Studying the Influence of the Mixing Speed of the Polymer Blend of General-Purpose Polystyrene and Acrylonitrile-Butadiene Styrene with the Applications of Artificial Neural Networks [Volume 17, Issue 4, 2020, Pages 21-32]

  • Ghiassimehr, B. Removal of Pb (II) From Wastewater Using Henna; Optimization of Operational Conditions [Volume 15, Issue 4, 2018, Pages 17-26]

  • Ghobadian, Barat Techno-Economic Optimization of a Continuous Process for Biodiesel Production from Waste Vegetable Oils [Volume 18, Issue 4, 2022, Pages 21-36]

  • Ghobadian, Barat Conceptual Design of a Batch Process for Biodiesel Production from High Free Fatty Acid Feedstocks [Volume 19, Issue 1, 2022]

  • Ghodbanan, Sh. Thermodynamic and Heat Transfer Evaluation of Pocket Drying Section in the Multi-Cylinder Dryers of Paper Machine [Volume 13, Issue 2, 2016, Pages 57-70]

  • Ghorbani, Y. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]

  • Ghorbanian, S. Effect of graphite oxidation on the yield and quality of graphene synthesized by supercritical exfoliation and its application in photocatalytic degradation of methylene blue [Volume 12, Issue 4, 2015, Pages 52-68]

  • Ghoreyshi, A. A. Synthesis of a high characteristics activated carbon from walnut shell for the removal of Cr (VI) and Fe (II) from aqueous solution: single and binary solutes adsorption [Volume 12, Issue 4, 2015, Pages 28-51]

  • Ghoreyshi, A. A. Extraction of pectin from sour orange and its application as the adsorbent for removal of nickel from aqueous solution: Kinetic and equilibrium study [Volume 15, Issue 2, 2018, Pages 3-21]

  • Ghoreyshi, A.A. Optimization of solvothermally synthesized ZIF-67 metal organic framework and its application for Cr(VI) adsorption from aqueous solution [Volume 15, Issue 4, 2018, Pages 27-47]

  • Ghourchian, H. Anticancer and Antioxidant Properties of Ag NPs Coated with BSA NPs [Volume 12, Issue 1, 2015, Pages 22-29]

  • Gomaa, E. Cyclic Voltammetry of Cobalt Chloride with L- Carrageenan (LK) Using Glassy Carbon Electrode [Volume 14, Issue 4, 2017, Pages 90-99]

  • Goodarzi, P. Kinetics of Propane Hydrate Formation in Agitated Reactor: A Mass Transfer Approach [Volume 14, Issue 2, 2017, Pages 48-58]

  • Gulcan, E. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]

H

  • Habibi, A.R. CFD Modeling of Hydrocarbon-Air System Hydrodynamics in Three Types of Column Reactors [Volume 17, Issue 1, 2020, Pages 47-64]

  • Habibi, M. R. Application of Turbo-Expander for Greenhouse Gas and Air Pollutant Emissions Reduction Using Exergy and Economical Analysis [Volume 14, Issue 4, 2017, Pages 32-47]

  • Hadi, A. Effect of graphite oxidation on the yield and quality of graphene synthesized by supercritical exfoliation and its application in photocatalytic degradation of methylene blue [Volume 12, Issue 4, 2015, Pages 52-68]

  • Hadi, N. CFD modeling for selective formation of propylene from methanol over synthesized Mn-substituted MFI metallosilicate catalyst [Volume 15, Issue 2, 2018, Pages 22-37]

  • Hadi Najafabadi, Hossein Three-dimensional CFD modeling of fluid flow and heat transfer characteristics of Al2O3/water nanofluid in microchannel heat sink with Eulerian-Eulerian approach [Volume 13, Issue 4, 2016, Pages 46-61]

  • Haghighiasl, A. Investigation of spent caustic wastewater treatment through response surface methodology and artificial neural network in a photocatalytic reactor [Volume 15, Issue 1, 2018, Pages 46-72]

  • Hajimohammadi, Reza Synthesis and characterization of doxorubicin coated with magnetic copolymer polycaprolactone-polyethylene glycol for use in the cancer treatment [Volume 18, Issue 4, 2022, Pages 37-49]

  • Hamedani, Y. Production and Characterization of Gelatine Based Electro-spun Nano-fibres as Burn Wound Dressings [Volume 14, Issue 1, 2017, Pages 3-14]

  • Hamidian, H. Stability and Rheological Behavior of Sulfonated Polyacrylamide/ Laponite Nanoparticles Dispersions in Electrolyte Media [Volume 14, Issue 3, 2017, Pages 41-54]

  • Haque, P. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]

  • Hasan, M. M. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]

  • Hasanzadeh, R. Simulation of Leaching of Starch from Potato in a Batch Extractor [Volume 12, Issue 2, 2015, Pages 26-36]

  • Hashemabadi, H. Prediction of Red Mud Bound-Soda Losses in Bayer Process Using Neural Networks [Volume 13, Issue 2, 2016, Pages 46-56]

  • Hashemi-Najafabadi, S. Assessment of Bioavailability of Crude Oil in Three Different Agricultural Soils [Volume 12, Issue 1, 2015, Pages 3-12]

  • Hashemipour rafsanjani, H. Methane oxy-steam reforming over a highly efficient Ni/Al2O3 nanocatalyst prepared by microwave-assisted impregnation method [Volume 14, Issue 4, 2017, Pages 3-16]

  • Hassanajili, Sh. Improvement of gas separation properties of polyurethane membrane using plasma grafting [Volume 14, Issue 3, 2017, Pages 19-30]

  • Hassanpour souderjani, H. Oxidative desulfurization of petroleum products using decorated cobalt oxide on the surface of modified carbon nanotubes-ICHEC-1887 [Volume 18, Issue 1, 2021, Pages 36-45]

  • Hazrati, H. Fe3O4 Magnetic Nanoparticles/ Graphene Oxide Nanosheets/Carbon Cloth as an Electrochemical Sensing Platform [Volume 16, Issue 2, 2019, Pages 95-102]

  • Hefzi Lotfabadi, Mahdi Investigating the performance of an ultrasonic-assisted rotating packed bed reactor for micromixing efficiency enhancement [Volume 18, Issue 4, 2022, Pages 50-64]

  • Heidari, N. Cooling Enhancement of a Photovoltaic Panel Through Ferrofluid Stimulation Using a Magnetic-Wind Turbine [Volume 16, Issue 4, 2019, Pages 35-52]

  • Hejazi, M.A. CO2 biofixation by Dunaliella Salina in batch and semi-continuous cultivations, using hydrophobic and hydrophilic poly ethylene (PE) hollow fiber membrane photobioreactors [Volume 13, Issue 1, 2016, Pages 47-59]

  • Hejazi, P. Assessment of effective factors on bacterial oxidation of ferrous iron by focusing on sweetening natural gas [Volume 15, Issue 1, 2018, Pages 18-34]

  • Hemmati, A. Comparison of Different Methods (Digestion, Combustion, Gasification and Pyrolysis) for Sludge Energy Recovery: A Case Study for Ekbatan’s Municipal Treatment Plant [Volume 16, Issue 1, 2019, Pages 70-83]

  • Hemmati, A. Groundwater Denitrification by Using MBBR With KMT Packing [Volume 17, Issue 4, 2020, Pages 60-68]

  • Hemmati, A. Study of the Industrial Wastewater Treatment by a Membrane Bioreactor (MBR) Case Study: Cookie Factory Wastewater [Volume 17, Issue 3, 2020, Pages 74-84]

  • Hemmati, H. Theoretical and Empirical Equilibrium Concentration for the Dry Reforming of Methane [Volume 18, Issue 2, 2021, Pages 31-47]

  • Hemmati, Hamed Investigating the Activity of the Supported Bimetallic Ni-Co Catalysts on the Dry Reforming of Methane [Volume 18, Issue 3, 2021, Pages 63-73]

  • Heravi, Malihe Simultaneous high hydrogen content-synthesis gas production and in-situ CO2 removal via sorption-enhanced reaction process: modeling, sensitivity analysis and multi-objective optimization using NSGA-II algorithm [Volume 13, Issue 4, 2016, Pages 71-95]

  • Heydarinasab, A. Optimization of Synthesis of Expandable Polystyrene by Multi-Stage Initiator Dosing [Volume 13, Issue 1, 2016, Pages 20-31]

  • Heydarinasab, A. Microfluidic extraction of tannic acid from Quercus leaves [Volume 15, Issue 3, 2018, Pages 15-33]

  • Hoorijani, Hamed Effect of isopropanol on fluidization of hydrophilic titanium nano-powder [Volume 19, Issue 2, 2022]

  • Hoshyar, N. Copper Catalysts Supported on CeMnO2 for CO Oxidation in Hydrogen-Rich Gas Streams [Volume 12, Issue 3, 2015, Pages 3-14]

  • Hosseini, F. Propionic acid extraction in a microfluidic system: simultaneous effects of channel diameter and fluid flow rate on the flow regime and mass transfer [Volume 15, Issue 4, 2018, Pages 48-62]

  • Hosseini, M. Fabrication and characterization of polycarbonate/titanium oxide nanotubes mixed matrix membranes for efficient removal of cadmium and copper from aqueous solution [Volume 14, Issue 2, 2017, Pages 59-73]

  • Hosseini, M. Optimization and Comparison of Ni and Cd Removal Using Zinc Powder with the Response Surface Methodology [Volume 17, Issue 4, 2020, Pages 3-20]

  • Hosseini, M. Investigation of the effect of DamKohler and Stanton non-dimensional numbers on the stability of continuous stirred tank reactors [Volume 18, Issue 2, 2021, Pages 48-58]

  • Hosseini, S. A. A Study of Catalytic Performance of Co3O4 and Cu-Co Nano Metal Oxides in Combustion of Aromatics [Volume 14, Issue 2, 2017, Pages 83-90]

  • Hosseini, Seyyed Ghorban Optimization of Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide based respiratory air Tablets Using Taguchi Method [Volume 18, Issue 4, 2022, Pages 82-98]

  • Hosseini, S. M. S. Methane oxy-steam reforming over a highly efficient Ni/Al2O3 nanocatalyst prepared by microwave-assisted impregnation method [Volume 14, Issue 4, 2017, Pages 3-16]

  • Hosseini, Z. S. Synthesis and Investigation of Stimuli-Responsive Amphiphilic Latex Nanoparticles by Seeded Emulsion Polymerization [Volume 17, Issue 1, 2020, Pages 79-89]

  • Hosseini-Jenab, M. Experimental Investigation on the Solubility and Initial Rate of Absorption of CO2 in Mixture of Amine-Functionalized Ionic Liquids and Physical Solvents [Volume 12, Issue 1, 2015, Pages 68-77]

  • Hosseinnia, A. Biological Conversion of Normal Chain Octadecane by Native Microbial Consortia [Volume 12, Issue 2, 2015, Pages 50-58]

  • Houshyar, Sh. Stochastic Comparisons of Probability Distribution Functions with Experimental Data in a Liquid-Liquid Extraction Column for Determination of Drop Size Distributions [Volume 14, Issue 3, 2017, Pages 82-95]

I

  • Irankhah, A. Methanol Steam Reforming Catalyzing over Cu/Zn/Fe Mixed Oxide Catalysts [Volume 14, Issue 1, 2017, Pages 26-39]

  • Irankhah, A. Effect of MgAl2O4 catalyst support synthesis method on the catalytic activity of nickel Nano catalyst in reverse water gas shift reaction [Volume 16, Issue 3, 2019, Pages 58-69]

  • Irankhah, A. CFD Simulation of Methane Steam Micro-Reformer: Channel Design and Inlet/Outlet Configuration [Volume 16, Issue 4, 2019, Pages 23-35]

  • Irankhah, A. Medium Temperature Shift Reaction Over Copper-Ceria catalyst in Fixed-Bed and Microchannel Reactors [Volume 18, Issue 1, 2021, Pages 46-51]

  • Irankhah, Abdullah Screening of important factors affecting the process of ammonia synthesis by Plackett-Burman method and process optimization with RSM [Volume 19, Issue 2, 2022]

  • Irankhah, A. Irankhah Copper Catalysts Supported on CeMnO2 for CO Oxidation in Hydrogen-Rich Gas Streams [Volume 12, Issue 3, 2015, Pages 3-14]

  • Iravani, E. Removal of Cerium from Aqueous Solutions by Amino Phosphate Modified Nano TiO2: Kinetic, and Equilibrium Studies [Volume 13, Issue 2, 2016, Pages 3-21]

  • Islam, Md. M. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]

  • Izadkhah, B. Catalytic oxidation of toluene over LaBO3 (B= Fe, Mn and Co) and LaCo0.7B′0.3O3 (B′= Fe and Mn) perovskite-type [Volume 14, Issue 1, 2017, Pages 67-73]

  • Izadkhah, M.Sh Application of artificial neural network in deoxygenation of water by glucoseoxidase immobilized in calcium alginate/MnO2 composite [Volume 15, Issue 3, 2018, Pages 82-93]

J

  • Jabbari, A.M. Fe3O4 Magnetic Nanoparticles/ Graphene Oxide Nanosheets/Carbon Cloth as an Electrochemical Sensing Platform [Volume 16, Issue 2, 2019, Pages 95-102]

  • Jadidi, M. Adsorption and Desorption Process of Chromium Ions Using Magnetic Iron Oxide Nanoparticles and Its Relevant Mechanism [Volume 14, Issue 3, 2017, Pages 31-40]

  • Jafari, M. Copper Catalysts Supported on CeMnO2 for CO Oxidation in Hydrogen-Rich Gas Streams [Volume 12, Issue 3, 2015, Pages 3-14]

  • Jafari, M. Methanol Steam Reforming Catalyzing over Cu/Zn/Fe Mixed Oxide Catalysts [Volume 14, Issue 1, 2017, Pages 26-39]

  • Jafarizadeh- Malmiri, Hoda Optimization of Candida rugosa lipase immobilization parameters on magnetic silica aerogel using adsorption method [Volume 13, Issue 3, 2016, Pages 19-31]

  • Jafarkhani, M. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering [Volume 18, Issue 1, 2021, Pages 3-15]

  • Jahanban-Esfahlan, A. A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]

  • Jahanban-Esfahlan, R. A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]

  • Jahangiri, Sahar Synthesis and characterization of doxorubicin coated with magnetic copolymer polycaprolactone-polyethylene glycol for use in the cancer treatment [Volume 18, Issue 4, 2022, Pages 37-49]

  • Jahanshahi, M. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering [Volume 18, Issue 1, 2021, Pages 3-15]

  • Jalili, A. H. Experimental Investigation on the Solubility and Initial Rate of Absorption of CO2 in Mixture of Amine-Functionalized Ionic Liquids and Physical Solvents [Volume 12, Issue 1, 2015, Pages 68-77]

  • Jalilnejad, E. CFD Modeling of Hydrocarbon-Air System Hydrodynamics in Three Types of Column Reactors [Volume 17, Issue 1, 2020, Pages 47-64]

  • Jamekhorshid, A. A Comprehensive Study on a Latent Heat Thermal Energy Storage System and its Feasible Applications in Greenhouses [Volume 13, Issue 2, 2016, Pages 33-45]

  • Jimoh, M. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]

  • Jorfi, S. Enhancing Photocatalytic Activity of Nitrogen Doped TiO2 for Degradation of 4-Chlorophenol under Solar Light Irradiation [Volume 15, Issue 3, 2018, Pages 3-14]

K

  • Kabir, H. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering [Volume 18, Issue 1, 2021, Pages 3-15]

  • Kakaei, H. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]

  • Kakoui, N. Extraction of pectin from sour orange and its application as the adsorbent for removal of nickel from aqueous solution: Kinetic and equilibrium study [Volume 15, Issue 2, 2018, Pages 3-21]

  • Kalbasi, M. A Numerical Simulation Model of Solid Acid Fuel Cell Performance by CsH2PO4 Electrolyte [Volume 14, Issue 2, 2017, Pages 17-32]

  • Kamandar, Mohamad Reza Drying Apple Slices in a Rotating-Tray Convective Dryer: A Study on Dehydration Characteristics and Qualitative Attributes [Volume 18, Issue 3, 2021, Pages 16-32]

  • Karami, H.R. Increasing flow capacity and reducing drag in microtubes using drag-reducing polymer [Volume 17, Issue 2, 2020, Pages 70-87]

  • Kargari, A. Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]

  • Karimi, A. Application of artificial neural network in deoxygenation of water by glucoseoxidase immobilized in calcium alginate/MnO2 composite [Volume 15, Issue 3, 2018, Pages 82-93]

  • Karimi, Asadollah Ultrasonic Assisted Synthesis and Characterization of xCuO/CeO2–γAl2O3 Nanoatalysts [Volume 13, Issue 3, 2016, Pages 43-53]

  • Karimi, S. Prediction of polyvinyl alcohol (PVOH) properties synthesized at various conditions by artificial neural networks technique [Volume 14, Issue 2, 2017, Pages 3-16]

  • Karimian, Azam Optimization of Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide based respiratory air Tablets Using Taguchi Method [Volume 18, Issue 4, 2022, Pages 82-98]

  • Karimian, H. Modification of Montmorillonite and Prediction of Polymer/Clay Affinity Using Surface Properties and Lattice Model [Volume 12, Issue 3, 2015, Pages 41-54]

  • Karimi-Sabet, J. Effect of graphite oxidation on the yield and quality of graphene synthesized by supercritical exfoliation and its application in photocatalytic degradation of methylene blue [Volume 12, Issue 4, 2015, Pages 52-68]

  • Kashi, E. Comparison the performance of different reverse osmosis membrane modules by CFD modeling [Volume 16, Issue 1, 2019, Pages 101-116]

  • Kayani, M. Mathematical simulation of thermal behavior of moving bed reactors [Volume 14, Issue 4, 2017, Pages 48-58]

  • Kazemi, F. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]

  • Kazemi-Beydokhti, A. Oxidative desulfurization of petroleum products using decorated cobalt oxide on the surface of modified carbon nanotubes-ICHEC-1887 [Volume 18, Issue 1, 2021, Pages 36-45]

  • Kazi, M.-K. Design and Fabrication of an Improved Single-Column Chromatographic Separation Process [Volume 15, Issue 4, 2018, Pages 81-92]

  • Keshavarz Moraveji, Mostafa Three-dimensional CFD modeling of fluid flow and heat transfer characteristics of Al2O3/water nanofluid in microchannel heat sink with Eulerian-Eulerian approach [Volume 13, Issue 4, 2016, Pages 46-61]

  • Keshavarz Moraveji*, M. Experimental Study and CFD Modeling of the Ohmic Heating Process in a Static Two-Phase Biosolid – Liquid System [Volume 12, Issue 2, 2015, Pages 75-87]

  • Khadiv-Parsi, P. Preparation and Drug-Delivery Properties of Metal-Organic Framework HKUST-1 [Volume 16, Issue 4, 2019, Pages 73-80]

  • Khajeh Amiri, M. Experimental, Kinetics and Isotherm Modeling of Carbon Dioxide Adsorption with 13X Zeolite in a fixed bed column [Volume 16, Issue 1, 2019, Pages 54-64]

  • Khan, M. N. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]

  • Kharazi, M. Adsorption Behavior of Short Alkyl Chain Imidazolium Ionic Liquidsat N-Butyl Acetate + Water Interface: Experiments and Modeling [Volume 12, Issue 2, 2015, Pages 59-74]

  • Khebri, V. Design and construction of a helium purification system using cryogenic adsorption process [Volume 15, Issue 1, 2018, Pages 89-101]

  • Khorshidi, J. Experimental study of hydrodynamic characteristics of improved sieve tray with push valves [Volume 14, Issue 1, 2017, Pages 40-51]

  • Khoshhal, S. Khoshhal Synthesis of a high characteristics activated carbon from walnut shell for the removal of Cr (VI) and Fe (II) from aqueous solution: single and binary solutes adsorption [Volume 12, Issue 4, 2015, Pages 28-51]

  • Khoshnam, Farhad Drying Apple Slices in a Rotating-Tray Convective Dryer: A Study on Dehydration Characteristics and Qualitative Attributes [Volume 18, Issue 3, 2021, Pages 16-32]

  • Khoshrou, Siamak Polysulfone/ Carbon Nanotubes Asymmetric Nanocomposite Membranes: Effect of Nanotubes Surface Modification on Morphology and Water Permeability [Volume 12, Issue 4, 2015, Pages 69-83]

  • Khosrozadeh, I. Optimization of Semiregenerative Catalytic Naphtha Reforming Unit to Enhance Octane Number and Reformate Yield [Volume 15, Issue 2, 2018, Pages 52-64]

  • Kian, M. Study of the Industrial Wastewater Treatment by a Membrane Bioreactor (MBR) Case Study: Cookie Factory Wastewater [Volume 17, Issue 3, 2020, Pages 74-84]

  • Koksal, M. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]

  • Kostic, N.A. DESULFURIZATION AND DEMETALIZATION OF USED ENGINE OIL IN LABORATORY SCALE [Volume 15, Issue 1, 2018, Pages 73-88]

  • Krstic, S.S. DESULFURIZATION AND DEMETALIZATION OF USED ENGINE OIL IN LABORATORY SCALE [Volume 15, Issue 1, 2018, Pages 73-88]

  • Krstić, B.V. DESULFURIZATION AND DEMETALIZATION OF USED ENGINE OIL IN LABORATORY SCALE [Volume 15, Issue 1, 2018, Pages 73-88]

  • Kulah, G. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]

L

  • Leon, Florin Liquid-liquid equilibrium data prediction using large margin nearest neighbor [Volume 13, Issue 4, 2016, Pages 14-32]

M

  • Mahmoodi, L. Mathematical simulation of thermal behavior of moving bed reactors [Volume 14, Issue 4, 2017, Pages 48-58]

  • Mahmoudian, M. Prediction of Red Mud Bound-Soda Losses in Bayer Process Using Neural Networks [Volume 13, Issue 2, 2016, Pages 46-56]

  • Mahmoudizadeh, M. Methanol Steam Reforming Catalyzing over Cu/Zn/Fe Mixed Oxide Catalysts [Volume 14, Issue 1, 2017, Pages 26-39]

  • Mashhadimoslem, Hossein Evaluation of Silica gel adsorbent potential for carbon dioxide capture: experimental and modeling [Volume 18, Issue 4, 2022, Pages 65-81]

  • Masoumi, M.E. Experimental and Kinetic Study of CO Oxidation Over LaFe1-xCuxO3 (x=0, 0.2, 0.4, 0.6) Perovskite-Type Oxides [Volume 15, Issue 2, 2018, Pages 91-102]

  • Masoumi, Sh. Characterization and optimization of SAPO-34 catalysts synthesized by mixed templates in MTO reaction [Volume 12, Issue 4, 2015, Pages 4-14]

  • Medi, B. Design and Fabrication of an Improved Single-Column Chromatographic Separation Process [Volume 15, Issue 4, 2018, Pages 81-92]

  • Mehdizadeh, A. Experimental Investigation on the Solubility and Initial Rate of Absorption of CO2 in Mixture of Amine-Functionalized Ionic Liquids and Physical Solvents [Volume 12, Issue 1, 2015, Pages 68-77]

  • Mehmandoust, Sh. Modification of Montmorillonite and Prediction of Polymer/Clay Affinity Using Surface Properties and Lattice Model [Volume 12, Issue 3, 2015, Pages 41-54]

  • Mehralizadeh, A. Studying the Influence of the Mixing Speed of the Polymer Blend of General-Purpose Polystyrene and Acrylonitrile-Butadiene Styrene with the Applications of Artificial Neural Networks [Volume 17, Issue 4, 2020, Pages 21-32]

  • Milosavljevic, B.L. DESULFURIZATION AND DEMETALIZATION OF USED ENGINE OIL IN LABORATORY SCALE [Volume 15, Issue 1, 2018, Pages 73-88]

  • Milosavljevic, M.M. DESULFURIZATION AND DEMETALIZATION OF USED ENGINE OIL IN LABORATORY SCALE [Volume 15, Issue 1, 2018, Pages 73-88]

  • Milosevic, D.L. DESULFURIZATION AND DEMETALIZATION OF USED ENGINE OIL IN LABORATORY SCALE [Volume 15, Issue 1, 2018, Pages 73-88]

  • Mirahmad, A. A Comprehensive Study on a Latent Heat Thermal Energy Storage System and its Feasible Applications in Greenhouses [Volume 13, Issue 2, 2016, Pages 33-45]

  • Mirfendereski, S. M. Synthesis of zeolite NaA nano-crystalls; effect of synthesis parameters on crystallinity and crystal size [Volume 16, Issue 1, 2019, Pages 22-38]

  • Mirhoseini renani, N. Effect of Electrohydrodynamic (EHD) on the Drying Rate of Polymer Films Based on the Heat and Mass Transfer [Volume 17, Issue 3, 2020, Pages 41-52]

  • Moaf, Mohammad Investigation of air injection impact on the thermal performance of helical tube with varying helix diameter: Downward Flow [Volume 19, Issue 2, 2022]

  • Moghaddas, J. Study on the Effect of Humidity on Electrical Properties of Copper-Silica Aerogel [Volume 12, Issue 2, 2015, Pages 3-12]

  • Moghaddas, J. Study on diffusion coefficient of benzene and ethyl benzene vapours in nanoporous silica aerogel and silica aerogel-activated carbon composites [Volume 16, Issue 1, 2019, Pages 1-21]

  • Moghaddas, J. Experimental and Computational Study on Hydrodynamic of a Downscaled Mini Vessel USP Dissolution Test Apparatus II [Volume 16, Issue 3, 2019, Pages 3-22]

  • Moghaddas, Jafarsadegh Optimization of Candida rugosa lipase immobilization parameters on magnetic silica aerogel using adsorption method [Volume 13, Issue 3, 2016, Pages 19-31]

  • Moghaddas, J.S. Synthesis and Characterization of Waterglass-Based Silica Aerogel Under Heat Treatment for Adsorption of Nitrate from Water: Batch and Column Studies [Volume 16, Issue 4, 2019, Pages 53-72]

  • Moghbeli, Mohammad Reza Polysulfone/ Carbon Nanotubes Asymmetric Nanocomposite Membranes: Effect of Nanotubes Surface Modification on Morphology and Water Permeability [Volume 12, Issue 4, 2015, Pages 69-83]

  • Moghbeli, M.R. Effect of silica particles on adhesion strength of polyvinyl chloride coatings on metal substrates [Volume 14, Issue 2, 2017, Pages 74-82]

  • Moghbeli1*, M. R. Modification of Montmorillonite and Prediction of Polymer/Clay Affinity Using Surface Properties and Lattice Model [Volume 12, Issue 3, 2015, Pages 41-54]

  • Mohamady, R. Dynamic Behavior of an Oil Droplet Adhered to the Wall Surface in a Channel Flow by the Lattice Boltzmann Method [Volume 15, Issue 1, 2018, Pages 35-48]

  • Mohammadi, A. Study on diffusion coefficient of benzene and ethyl benzene vapours in nanoporous silica aerogel and silica aerogel-activated carbon composites [Volume 16, Issue 1, 2019, Pages 1-21]

  • Mohammadi, A. Experimental and Computational Study on Hydrodynamic of a Downscaled Mini Vessel USP Dissolution Test Apparatus II [Volume 16, Issue 3, 2019, Pages 3-22]

  • Mohammadi, Abbas Techno-Economic Optimization of a Continuous Process for Biodiesel Production from Waste Vegetable Oils [Volume 18, Issue 4, 2022, Pages 21-36]

  • Mohammadi, Abbas Conceptual Design of a Batch Process for Biodiesel Production from High Free Fatty Acid Feedstocks [Volume 19, Issue 1, 2022]

  • Mohammadi, F. Investigation of Liquid–Liquid Two-Phase Flow Pattern in Microreactors for Biodiesel Production [Volume 12, Issue 3, 2015, Pages 32-40]

  • Mohammadi, F. Biodiesel production from soybean oil using ionic liquid as a catalyst in a microreactor [Volume 15, Issue 1, 2018, Pages 102-114]

  • Mohammadi Doust, A. An optimization study by response surface methodology (RSM) on viscosity reduction of residue fuel oil exposed ultrasonic waves and solvent injection [Volume 13, Issue 1, 2016, Pages 3-19]

  • Mohammadnezami, H. CFD Simulation of Methane Steam Micro-Reformer: Channel Design and Inlet/Outlet Configuration [Volume 16, Issue 4, 2019, Pages 23-35]

  • Mohebbi, V. Kinetics of Propane Hydrate Formation in Agitated Reactor: A Mass Transfer Approach [Volume 14, Issue 2, 2017, Pages 48-58]

  • Mokhtarani, B. Effect of electrokinetic on biodegradation of fluorene and phenanthrene in soil [Volume 13, Issue 2, 2016, Pages 71-79]

  • Moosavi, H. The Effect of the Method of Adding Impregnation Solutions on the Properties and Performance of the Pd-Ag/Al2O3 Catalyst in the Tail-End Acetylene Selective Hydrogenation. [Volume 18, Issue 2, 2021, Pages 19-30]

  • Moosavian, M.A. Removal of Cerium from Aqueous Solutions by Amino Phosphate Modified Nano TiO2: Kinetic, and Equilibrium Studies [Volume 13, Issue 2, 2016, Pages 3-21]

  • Moosavian, S. M. A. Effect of graphite oxidation on the yield and quality of graphene synthesized by supercritical exfoliation and its application in photocatalytic degradation of methylene blue [Volume 12, Issue 4, 2015, Pages 52-68]

  • Moosavian, S. M. A. Stochastic Comparisons of Probability Distribution Functions with Experimental Data in a Liquid-Liquid Extraction Column for Determination of Drop Size Distributions [Volume 14, Issue 3, 2017, Pages 82-95]

  • Moradi, Gh. Theoretical and Empirical Equilibrium Concentration for the Dry Reforming of Methane [Volume 18, Issue 2, 2021, Pages 31-47]

  • Moradi, Gholamreza Investigating the Activity of the Supported Bimetallic Ni-Co Catalysts on the Dry Reforming of Methane [Volume 18, Issue 3, 2021, Pages 63-73]

  • Moradi, H. Preparation and Drug-Delivery Properties of Metal-Organic Framework HKUST-1 [Volume 16, Issue 4, 2019, Pages 73-80]

  • Moradkhani, H. Application of artificial neural network in deoxygenation of water by glucoseoxidase immobilized in calcium alginate/MnO2 composite [Volume 15, Issue 3, 2018, Pages 82-93]

  • Moraveji, Mostafa Optimization of the Adsorption of Pb(II) and Zn(II) onto the EDTA-Modified MnO2/Chitosan/Fe3O4 Nanocomposite from an Aqueous Solution Using RSM According to the CCD Method [Volume 18, Issue 3, 2021, Pages 33-51]

  • Moraveji, Mostafa Fabrication and characterization of polysulfone-graphene oxide mixed matrix membranes for natural gas treatment [Volume 19, Issue 2, 2022]

  • Mortaheb, H.R. Effect of electrokinetic on biodegradation of fluorene and phenanthrene in soil [Volume 13, Issue 2, 2016, Pages 71-79]

  • Mortezaeikia, V. CO2 biofixation by Dunaliella Salina in batch and semi-continuous cultivations, using hydrophobic and hydrophilic poly ethylene (PE) hollow fiber membrane photobioreactors [Volume 13, Issue 1, 2016, Pages 47-59]

  • Mostafazadeh, N. Optimization of solvothermally synthesized ZIF-67 metal organic framework and its application for Cr(VI) adsorption from aqueous solution [Volume 15, Issue 4, 2018, Pages 27-47]

  • Mostoufi, N. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]

  • Mostoufi, Navid Effect of isopropanol on fluidization of hydrophilic titanium nano-powder [Volume 19, Issue 2, 2022]

  • Mousavi, S.A. Prediction of the Effect of Polymer Membrane Composition in a Dry Air Humidification Process via Neural Network Modeling [Volume 13, Issue 1, 2016, Pages 73-83]

  • Mousavi, S.E Catalytic reduction of SO2 with CH4 to elemental sulfur: A comparative analysis of alumina, copper-alumina and nickel-alumina catalysts [Volume 15, Issue 3, 2018, Pages 94-107]

  • Mousavi, Seyed Hamed Stochastic Comparisons of Probability Distribution Functions with Experimental Data in a Liquid-Liquid Extraction Column for Determination of Drop Size Distributions [Volume 14, Issue 3, 2017, Pages 82-95]

  • Mousavi, S. M. Assessment of Bioavailability of Crude Oil in Three Different Agricultural Soils [Volume 12, Issue 1, 2015, Pages 3-12]

  • Movagharnejad*, K. Experimental Study and Mathematical Modeling of the Osmotic Drying Process [Volume 12, Issue 3, 2015, Pages 15-32]

  • Movahedirad, S. Bubble formation on a single orifice in a gas solid fluidized bed using digital image analysis [Volume 13, Issue 1, 2016, Pages 60-72]

  • Movahedirad, Salman Mixing of the Immiscible Liquids in the Entrance Region of a T-Type Chamber Using Laser Induced Fluorescence (LIF) Method [Volume 13, Issue 3, 2016, Pages 32-42]

  • Mozafari, M. Demuification of Water-in-Oil Emulsions by Means of Dielectrophoresis [Volume 17, Issue 3, 2020, Pages 24-40]

  • Mozaffari, A. Catalytic reduction of SO2 with CH4 to elemental sulfur: A comparative analysis of alumina, copper-alumina and nickel-alumina catalysts [Volume 15, Issue 3, 2018, Pages 94-107]

N

  • Naser Ahmadi, A. Experimental Investigation on the Solubility and Initial Rate of Absorption of CO2 in Mixture of Amine-Functionalized Ionic Liquids and Physical Solvents [Volume 12, Issue 1, 2015, Pages 68-77]

  • Nasr Esfahany, M. Adsorption and Desorption Process of Chromium Ions Using Magnetic Iron Oxide Nanoparticles and Its Relevant Mechanism [Volume 14, Issue 3, 2017, Pages 31-40]

  • Navarchian, A.H Response Surface Methodology for Investigating the Effects of Hydrolysis Reaction Parameters on Molecular Structure and Performance of Polyvinyl Alcohol as Primary Suspending Agent [Volume 14, Issue 1, 2017, Pages 52-66]

  • Nazari, M. Prediction of polyvinyl alcohol (PVOH) properties synthesized at various conditions by artificial neural networks technique [Volume 14, Issue 2, 2017, Pages 3-16]

  • Negm, A. Cyclic Voltammetry of Cobalt Chloride with L- Carrageenan (LK) Using Glassy Carbon Electrode [Volume 14, Issue 4, 2017, Pages 90-99]

  • Nejad, Gh. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]

  • Niaei, A. Catalytic oxidation of toluene over LaBO3 (B= Fe, Mn and Co) and LaCo0.7B′0.3O3 (B′= Fe and Mn) perovskite-type [Volume 14, Issue 1, 2017, Pages 67-73]

  • Niaei, A. CFD modeling for selective formation of propylene from methanol over synthesized Mn-substituted MFI metallosilicate catalyst [Volume 15, Issue 2, 2018, Pages 22-37]

  • Niaei, A. Experimental and Kinetic Study of CO Oxidation Over LaFe1-xCuxO3 (x=0, 0.2, 0.4, 0.6) Perovskite-Type Oxides [Volume 15, Issue 2, 2018, Pages 91-102]

  • Niazi, M. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering [Volume 18, Issue 1, 2021, Pages 3-15]

  • Nikpour, M. Lipase Immobilized into Novel GPTMS: TMOS Derived Sol-Gels and Its Application for Biodiesel Production from Waste Oil [Volume 13, Issue 1, 2016, Pages 32-46]

  • Nikzad, M. Extraction of pectin from sour orange and its application as the adsorbent for removal of nickel from aqueous solution: Kinetic and equilibrium study [Volume 15, Issue 2, 2018, Pages 3-21]

  • NoieBaghban, S. H. Thermal Conductivity of Water Based Nanofluids Containing Decorated Multi Walled Carbon Nanotubes with Different Amount of TiO2 Nanoparticles [Volume 12, Issue 1, 2015, Pages 30-40]

  • Norouzi, Mahdi Optimization of Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide based respiratory air Tablets Using Taguchi Method [Volume 18, Issue 4, 2022, Pages 82-98]

  • Nosrati, M. Optimization of factors affecting on sulfide oxidation from synthetic spent caustic by Haloalkaliphilic Thioalkalivibrio versutus by focus on sodium ion effect: Application of response surface methodology [Volume 14, Issue 1, 2017, Pages 74-87]

O

  • Omidi, I. A Numerical Simulation Model of Solid Acid Fuel Cell Performance by CsH2PO4 Electrolyte [Volume 14, Issue 2, 2017, Pages 17-32]

  • Omidifar, M Optimization of Hydrogen Distribution Network by Imperialist Competitive AlgorithmIn [Volume 13, Issue 3, 2016, Pages 63-77]

  • Omidkhah, Mohammadreza Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]

  • Omidkhah, M.R Biofouling Behavior on Forward Osmosis Using Vertically Aligned CNT Membrane on Alumina [Volume 16, Issue 2, 2019, Pages 1-13]

  • Omidvar Langroudi, Leila An investigation of heat and mass transfer enhancement of air dehumidification with addition of γ-Al2O3 nano-particles to liquid desiccant [Volume 13, Issue 4, 2016, Pages 96-112]

  • Oudi, A. H. Investigation of the effect of DamKohler and Stanton non-dimensional numbers on the stability of continuous stirred tank reactors [Volume 18, Issue 2, 2021, Pages 48-58]

  • Oudi, Amirhossein Screening of important factors affecting the process of ammonia synthesis by Plackett-Burman method and process optimization with RSM [Volume 19, Issue 2, 2022]

  • Ovaysi, S. Developing a Mathematical Model to Predict the Behavior of a Supersonic Superheated Steam Flow inside a Laval Nozzle [Volume 17, Issue 2, 2020, Pages 56-69]

  • Ovaysi, Saeed CFD Modeling and Industrial Evaluation of a Cyclone Cascade for the Production of the HDPE Catalyst [Volume 18, Issue 3, 2021, Pages 74-85]

  • Ozairy, R. Developing genetic algorithm-based neural networks and sensitivity analysis for thermal conductivity of natural gases [Volume 17, Issue 2, 2020, Pages 44-55]

P

  • Pahlavanzadeh, H. Catalytic reduction of SO2 with CH4 to elemental sulfur: A comparative analysis of alumina, copper-alumina and nickel-alumina catalysts [Volume 15, Issue 3, 2018, Pages 94-107]

  • Panadare, D. C. Applications of Waste Cooking Oil Other Than Biodiesel: A Review [Volume 12, Issue 3, 2015, Pages 55-76]

  • Panahadeh, Adel Optimization of the Adsorption of Pb(II) and Zn(II) onto the EDTA-Modified MnO2/Chitosan/Fe3O4 Nanocomposite from an Aqueous Solution Using RSM According to the CCD Method [Volume 18, Issue 3, 2021, Pages 33-51]

  • Pandey, J. Kinetic, mechanistic and thermodynamic investigations on Iridium (III) catalyzed oxidation of D-Mannitol by N-chloro-p-toluenesulfonamide in perchloric acid medium [Volume 14, Issue 4, 2017, Pages 77-89]

  • Parvareh, A. Experimental and CFD Study of the Tube Configuration Effect on the Shell-Side Thermal Performance in a Shell and Helically Coiled Tube Heat Exchanger [Volume 12, Issue 2, 2015, Pages 13-25]

  • Parvareh, A. investigation of mercaptan removal from Kerosene using passive mixing tools: Experimental study and CFD modeling [Volume 14, Issue 3, 2017, Pages 55-64]

  • Parvareh, A. Biodiesel production from soybean oil using ionic liquid as a catalyst in a microreactor [Volume 15, Issue 1, 2018, Pages 102-114]

  • Parvareh, Arsalan Optimization of the Adsorption of Pb(II) and Zn(II) onto the EDTA-Modified MnO2/Chitosan/Fe3O4 Nanocomposite from an Aqueous Solution Using RSM According to the CCD Method [Volume 18, Issue 3, 2021, Pages 33-51]

  • Parvareh, Arsalan Fabrication and characterization of polysulfone-graphene oxide mixed matrix membranes for natural gas treatment [Volume 19, Issue 2, 2022]

  • Parvizi, . investigation of mercaptan removal from Kerosene using passive mixing tools: Experimental study and CFD modeling [Volume 14, Issue 3, 2017, Pages 55-64]

  • Parvizsedghy, R. Production of Bio-Gasoline with High Octane Number, as a Renewable Transportation Biofuel, via Thermochemical Conversion of Castor Oil [Volume 17, Issue 3, 2020, Pages 3-23]

  • Pashai, E. Observations of Sludge Formation in Group I Base Stock for Lubricants and Thermodynamic Modeling with the SAFT Equation of State [Volume 14, Issue 2, 2017, Pages 33-47]

  • Patel, R. Kinetic, mechanistic and thermodynamic investigations on Iridium (III) catalyzed oxidation of D-Mannitol by N-chloro-p-toluenesulfonamide in perchloric acid medium [Volume 14, Issue 4, 2017, Pages 77-89]

  • Payan, A. Enhancing Photocatalytic Activity of Nitrogen Doped TiO2 for Degradation of 4-Chlorophenol under Solar Light Irradiation [Volume 15, Issue 3, 2018, Pages 3-14]

  • Pazouki, M. Biological Conversion of Normal Chain Octadecane by Native Microbial Consortia [Volume 12, Issue 2, 2015, Pages 50-58]

  • Pazouki, M. Lipase Immobilized into Novel GPTMS: TMOS Derived Sol-Gels and Its Application for Biodiesel Production from Waste Oil [Volume 13, Issue 1, 2016, Pages 32-46]

  • Pazouki, Mohammad Kinetics investigation of cell growth, xanthan production and sugar cane molasses consumption by Xanthomonas campestris [Volume 12, Issue 4, 2015, Pages 84-92]

  • Pecic, L.S. DESULFURIZATION AND DEMETALIZATION OF USED ENGINE OIL IN LABORATORY SCALE [Volume 15, Issue 1, 2018, Pages 73-88]

  • Peighambardoust, Seyed Jamaleddin Preparation of Flame Retardant Polystyrene via In-Situ Bulk Polymerization Method and Evaluation of its Flammability Properties [Volume 13, Issue 4, 2016, Pages 62-70]

  • Peighambardoust, S.J. Methanol crossover and selectivity of nafion/heteropolyacid/montmorillonite nanocomposite proton exchange membranes for DMFC applications [Volume 14, Issue 3, 2017, Pages 65-81]

  • Pirzadeh, K. Optimization of solvothermally synthesized ZIF-67 metal organic framework and its application for Cr(VI) adsorption from aqueous solution [Volume 15, Issue 4, 2018, Pages 27-47]

  • Poorabdollah, M. Modified and unmodified Graphite/unsaturated polyester resin composites: thermal and mechanical behavior [Volume 17, Issue 2, 2020, Pages 14-33]

  • Pourshayan, A. Ebrahim Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]

  • Prakash, B. Development and Evaluation of the Magnesium Potassium Phosphate Cement Based Refractory [Volume 17, Issue 4, 2020, Pages 69-78]

R

  • Rabbani, A. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]

  • Rabbani, Y. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]

  • Rabbani,, Y. An Investigation of the Effects of Dopamine on the Superhydrophobicity of Carbonyl Iron Particles with Stearic Acid [Volume 17, Issue 4, 2020, Pages 49-59]

  • Raeisi, M. Groundwater Denitrification by Using MBBR With KMT Packing [Volume 17, Issue 4, 2020, Pages 60-68]

  • Rafie Lak, A. Designing a glycemic control strategy to maintain glucose homeostasis and prevent hypoglycemia for subjects with type 1 diabetes [Volume 15, Issue 3, 2018, Pages 34-52]

  • Rahimi, M. Experimental and CFD Study of the Tube Configuration Effect on the Shell-Side Thermal Performance in a Shell and Helically Coiled Tube Heat Exchanger [Volume 12, Issue 2, 2015, Pages 13-25]

  • Rahimi, M. Investigation of Liquid–Liquid Two-Phase Flow Pattern in Microreactors for Biodiesel Production [Volume 12, Issue 3, 2015, Pages 32-40]

  • Rahimi, M. An optimization study by response surface methodology (RSM) on viscosity reduction of residue fuel oil exposed ultrasonic waves and solvent injection [Volume 13, Issue 1, 2016, Pages 3-19]

  • Rahimi, M. Ultrasound-Assisted Biodiesel Production in microreactors [Volume 13, Issue 2, 2016, Pages 22-32]

  • Rahimi, M. Waste water ammonia stripping intensification using microfluidic system [Volume 14, Issue 4, 2017, Pages 17-31]

  • Rahimi, M. Biodiesel production from soybean oil using ionic liquid as a catalyst in a microreactor [Volume 15, Issue 1, 2018, Pages 102-114]

  • Rahimi, M. Microfluidic extraction of tannic acid from Quercus leaves [Volume 15, Issue 3, 2018, Pages 15-33]

  • Rahimi, M. Propionic acid extraction in a microfluidic system: simultaneous effects of channel diameter and fluid flow rate on the flow regime and mass transfer [Volume 15, Issue 4, 2018, Pages 48-62]

  • Rahimi, M. Increasing flow capacity and reducing drag in microtubes using drag-reducing polymer [Volume 17, Issue 2, 2020, Pages 70-87]

  • Rahimi, M. Developing a Mathematical Model to Predict the Behavior of a Supersonic Superheated Steam Flow inside a Laval Nozzle [Volume 17, Issue 2, 2020, Pages 56-69]

  • Rahimi, M. Cooling Enhancement of a Photovoltaic Panel Through Ferrofluid Stimulation Using a Magnetic-Wind Turbine [Volume 16, Issue 4, 2019, Pages 35-52]

  • Rahimi, Mahdi Application of ANFIS and Sobol approaches for optimization and sensitivity assessment of triglyceride biosorption from blood serum [Volume 19, Issue 1, 2022]

  • Rahimi, R. Modeling and Simulation of a Divided Wall Column for 1,3 Butadiene Purification [Volume 12, Issue 1, 2015, Pages 60-67]

  • Rahimi, Rahbar Simulation, Control and Experimental Analysis of 1,3Butadiene Purification Unit [Volume 13, Issue 4, 2016, Pages 33-45]

  • Rahimi Fard, M. The Effect of the Method of Adding Impregnation Solutions on the Properties and Performance of the Pd-Ag/Al2O3 Catalyst in the Tail-End Acetylene Selective Hydrogenation. [Volume 18, Issue 2, 2021, Pages 19-30]

  • Rahimpour, Farshad Liquid-liquid equilibrium data prediction using large margin nearest neighbor [Volume 13, Issue 4, 2016, Pages 14-32]

  • Rahimpour, Mohammad Reza Simultaneous high hydrogen content-synthesis gas production and in-situ CO2 removal via sorption-enhanced reaction process: modeling, sensitivity analysis and multi-objective optimization using NSGA-II algorithm [Volume 13, Issue 4, 2016, Pages 71-95]

  • Rahimpour, M.R. Enhancement of Hydrogen and Methanol Production using a Double Fluidized-bed Two Membranes Reactor [Volume 13, Issue 3, 2016, Pages 3-18]

  • Rahman, M. M. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]

  • Rahmanian, M. Modeling and Simulation of a Divided Wall Column for 1,3 Butadiene Purification [Volume 12, Issue 1, 2015, Pages 60-67]

  • Rahmanzadeh derisi, M. Effect of Solvent on the Optimal Thermodynamic Conditions of Ternary System (CO2, Alcohol, Ampicillin) in GAS Process [Volume 17, Issue 1, 2020, Pages 37-46]

  • Rahmanzadeh derisi, Maryam Determining the Optimal Thermodynamic Conditions of Ternary System Containing (CO2, solvent, 5-Fluorouracil) in GAS Process [Volume 19, Issue 1, 2022]

  • Rajabi, L. Modified and unmodified Graphite/unsaturated polyester resin composites: thermal and mechanical behavior [Volume 17, Issue 2, 2020, Pages 14-33]

  • Rajendran, V. Phase-transfer catalysis for synthesis of ethyl 2-(4-nitrophenoxy)acetate under sonication- kinetic aspects [Volume 13, Issue 2, 2016, Pages 80-87]

  • Rajendran, Venugopal Synthesis of 1-(isopentyloxy)-4-nitrobenzene under ultrasound assisted liquid-liquid phase-transfer catalysis [Volume 13, Issue 3, 2016, Pages 54-62]

  • Ramakrishna, S. Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]

  • Ranjbara, A. Effect of MgAl2O4 catalyst support synthesis method on the catalytic activity of nickel Nano catalyst in reverse water gas shift reaction [Volume 16, Issue 3, 2019, Pages 58-69]

  • Rashidi Zonouz, P. Experimental and Kinetic Study of CO Oxidation Over LaFe1-xCuxO3 (x=0, 0.2, 0.4, 0.6) Perovskite-Type Oxides [Volume 15, Issue 2, 2018, Pages 91-102]

  • Rathod*, V. K. Applications of Waste Cooking Oil Other Than Biodiesel: A Review [Volume 12, Issue 3, 2015, Pages 55-76]

  • Razzaghi, M. Application of artificial neural network in deoxygenation of water by glucoseoxidase immobilized in calcium alginate/MnO2 composite [Volume 15, Issue 3, 2018, Pages 82-93]

  • Rezaei, H. Developing a Mathematical Model to Predict the Behavior of a Supersonic Superheated Steam Flow inside a Laval Nozzle [Volume 17, Issue 2, 2020, Pages 56-69]

  • Rezaei, R. Prediction of the Effect of Polymer Membrane Composition in a Dry Air Humidification Process via Neural Network Modeling [Volume 13, Issue 1, 2016, Pages 73-83]

  • Rezvan Leylan, Seyyed Alireza Optimization of Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide based respiratory air Tablets Using Taguchi Method [Volume 18, Issue 4, 2022, Pages 82-98]

  • Rimu, S.H. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]

  • Roosta, A.A. Optimization of Semiregenerative Catalytic Naphtha Reforming Unit to Enhance Octane Number and Reformate Yield [Volume 15, Issue 2, 2018, Pages 52-64]

  • Roozbehani, B. Enhancing Photocatalytic Activity of Nitrogen Doped TiO2 for Degradation of 4-Chlorophenol under Solar Light Irradiation [Volume 15, Issue 3, 2018, Pages 3-14]

  • Rostami, Kh. Comparison the performance of different reverse osmosis membrane modules by CFD modeling [Volume 16, Issue 1, 2019, Pages 101-116]

  • Roufegarinejad, L. A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]

S

  • Saberimoghaddam, A. Parasitic Effect of Tube Wall Longitudinal Heat Conduction on Cryogenic Gas Temperature [Volume 14, Issue 1, 2017, Pages 15-25]

  • Saberimoghaddam, A. Transient thermal study of recuperative tube in tube heat exchanger operating in refrigeration system using experimental test and mathematical simulation [Volume 14, Issue 3, 2017, Pages 3-18]

  • Saberimoghaddam, A. Design and construction of a helium purification system using cryogenic adsorption process [Volume 15, Issue 1, 2018, Pages 89-101]

  • Sadeghi, Morteza Relationship between the Microstructure and Gas Transport Properties of Polyurethane/Polycaprolactone Blends [Volume 13, Issue 3, 2016, Pages 78-88]

  • Sadeghi, M.T. Bubble formation on a single orifice in a gas solid fluidized bed using digital image analysis [Volume 13, Issue 1, 2016, Pages 60-72]

  • Sadeghi, N. Modification of Mixed Matrix Membranes' Famous Permeability Prediction Models by Considering the Formed Voids Around Nonporous Fillers [Volume 17, Issue 3, 2020, Pages 53-73]

  • Sadrameli, S. M. Production of Bio-Gasoline with High Octane Number, as a Renewable Transportation Biofuel, via Thermochemical Conversion of Castor Oil [Volume 17, Issue 3, 2020, Pages 3-23]

  • Sadrameli, S.M. A Comprehensive Study on a Latent Heat Thermal Energy Storage System and its Feasible Applications in Greenhouses [Volume 13, Issue 2, 2016, Pages 33-45]

  • Sadri, H. R. Effect of operating conditions on divinylbenzene production in diethyl benzene dehydrogenation reactor [Volume 15, Issue 4, 2018, Pages 93-104]

  • Sadri, H. R. Reactor modeling and kinetic parameters estimation for diethylbenzene (DEB) dehydrogenation reactions [Volume 16, Issue 3, 2019, Pages 23-36]

  • Saeedi, M. Induced tissue cell death by magnetic nanoparticle hyperthermia for cancer treatment: an in silico study [Volume 14, Issue 4, 2017, Pages 59-79]

  • Safajou Jahankhanemlou, M. The Influences of the Nanoparticles Related Parameters on the Tensile Strength of Polymer Nanocomposites [Volume 17, Issue 1, 2020, Pages 65-78]

  • Saffar, F. Predicting the coefficients of the Daubert and Danner correlation using a neural network model [Volume 15, Issue 2, 2018, Pages 78-90]

  • Sahebdelfar, S. The Effect of the Method of Adding Impregnation Solutions on the Properties and Performance of the Pd-Ag/Al2O3 Catalyst in the Tail-End Acetylene Selective Hydrogenation. [Volume 18, Issue 2, 2021, Pages 19-30]

  • Saien, J. Adsorption Behavior of Short Alkyl Chain Imidazolium Ionic Liquidsat N-Butyl Acetate + Water Interface: Experiments and Modeling [Volume 12, Issue 2, 2015, Pages 59-74]

  • Salam, K. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]

  • Salari, D. Catalytic oxidation of toluene over LaBO3 (B= Fe, Mn and Co) and LaCo0.7B′0.3O3 (B′= Fe and Mn) perovskite-type [Volume 14, Issue 1, 2017, Pages 67-73]

  • Salawudeen, T. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]

  • Salehi, S. M. A three-dimensional mathematical model for drug delivery from drug-eluting stents [Volume 12, Issue 4, 2015, Pages 15-27]

  • Salimi, H. Improved numerical simulation of the low temperature Fischer-Tropsch synthesis in a trickle bed reactor [Volume 15, Issue 1, 2018, Pages 1-17]

  • Salimi, S. Computational fluid dynamics study and GA modeling approach of the bend angle effect on thermal-hydraulic characteristics in zigzag channels [Volume 16, Issue 3, 2019, Pages 70-83]

  • Samimi, A. Prediction of the Effect of Polymer Membrane Composition in a Dry Air Humidification Process via Neural Network Modeling [Volume 13, Issue 1, 2016, Pages 73-83]

  • Sanaeepur, H. Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]

  • Sarbanha, Ali Akbar Mixing of the Immiscible Liquids in the Entrance Region of a T-Type Chamber Using Laser Induced Fluorescence (LIF) Method [Volume 13, Issue 3, 2016, Pages 32-42]

  • Seyedmohaghegh, S. M. Prediction of polyvinyl alcohol (PVOH) properties synthesized at various conditions by artificial neural networks technique [Volume 14, Issue 2, 2017, Pages 3-16]

  • Seyyedebrahimi, S.A An Investigation of the Effects of Dopamine on the Superhydrophobicity of Carbonyl Iron Particles with Stearic Acid [Volume 17, Issue 4, 2020, Pages 49-59]

  • Shafiee, M. Removal of Pb (II) From Wastewater Using Henna; Optimization of Operational Conditions [Volume 15, Issue 4, 2018, Pages 17-26]

  • Shafieeardestani, M. Preparation and Drug-Delivery Properties of Metal-Organic Framework HKUST-1 [Volume 16, Issue 4, 2019, Pages 73-80]

  • Shafiee Langari, F. Experimental Study and Mathematical Modeling of the Osmotic Drying Process [Volume 12, Issue 3, 2015, Pages 15-32]

  • Shafiei, F. Nelder-Mead algorithm optimization and Galerkin’s method thermal performance analysis of circular porous fins with various profiles in fully wet conditions [Volume 16, Issue 3, 2019, Pages 37-57]

  • Shafiei, S Optimization of Hydrogen Distribution Network by Imperialist Competitive AlgorithmIn [Volume 13, Issue 3, 2016, Pages 63-77]

  • Shafiei, S. Thermodynamic and Heat Transfer Evaluation of Pocket Drying Section in the Multi-Cylinder Dryers of Paper Machine [Volume 13, Issue 2, 2016, Pages 57-70]

  • Shafiei, Sirous Isothermal Reactor Network Synthesis Using Coupled NonDominated Sorting Genetic Algorithm-II (NSGAII) with Quasi Linear Programming (LP) Method [Volume 12, Issue 3, 2015, Pages 77-95]

  • Shahsavarzadeh-Jangi, P. Assessment of Bioavailability of Crude Oil in Three Different Agricultural Soils [Volume 12, Issue 1, 2015, Pages 3-12]

  • Shahzamani, Mahnaz Relationship between the Microstructure and Gas Transport Properties of Polyurethane/Polycaprolactone Blends [Volume 13, Issue 3, 2016, Pages 78-88]

  • Shariatinia, Z. Fabrication of Chitosan-Polyethylene Oxide Electrospun Nanofibrous Mats Containing Green Tea Extract [Volume 15, Issue 2, 2018, Pages 65-77]

  • Shariatmadar, F. S. An Empirical Correlation to Predict the Ignition Delay Time for Some Hydrocarbon Fuels [Volume 13, Issue 1, 2016, Pages 84-97]

  • Shariaty-Niassar, M. An Investigation of the Effects of Dopamine on the Superhydrophobicity of Carbonyl Iron Particles with Stearic Acid [Volume 17, Issue 4, 2020, Pages 49-59]

  • Sharifnia, Sh. Degradation of Diclofenac Sodium under Solar Light Irradiation by Photocatalytic Performance of ZnO and V2O5 [Volume 15, Issue 4, 2018, Pages 1-16]

  • Sharifzadeh, E. The Influences of the Nanoparticles Related Parameters on the Tensile Strength of Polymer Nanocomposites [Volume 17, Issue 1, 2020, Pages 65-78]

  • Sharifzadeh, E. Synthesis and Characterization of Waterglass-Based Silica Aerogel Under Heat Treatment for Adsorption of Nitrate from Water: Batch and Column Studies [Volume 16, Issue 4, 2019, Pages 53-72]

  • Sharifzadeh, E. Investigating the Effects of Hollow Graphene Oxide Nanoparticles on the Thermal/Mechanical Properties of Polymer Nanocomposites: Experimental, Analytical and Simulation Approaches [Volume 18, Issue 2, 2021, Pages 71-83]

  • Shavandi, M. Optimization of factors affecting on sulfide oxidation from synthetic spent caustic by Haloalkaliphilic Thioalkalivibrio versutus by focus on sodium ion effect: Application of response surface methodology [Volume 14, Issue 1, 2017, Pages 74-87]

  • Shayegan, J. Study of the Industrial Wastewater Treatment by a Membrane Bioreactor (MBR) Case Study: Cookie Factory Wastewater [Volume 17, Issue 3, 2020, Pages 74-84]

  • Shayesteh, k. Optimization and Comparison of Ni and Cd Removal Using Zinc Powder with the Response Surface Methodology [Volume 17, Issue 4, 2020, Pages 3-20]

  • Shenavar, Abolfazl Preparation of Flame Retardant Polystyrene via In-Situ Bulk Polymerization Method and Evaluation of its Flammability Properties [Volume 13, Issue 4, 2016, Pages 62-70]

  • Shirazian, S. Dehydration of Natural Gas Using Synthesized Chabazite Zeolite Membranes [Volume 12, Issue 1, 2015, Pages 13-21]

  • Shirvani, S. Hydroconversion of Furfural over Cu-Cr/SiO2 Nanocatalysts: A Comparative Study [Volume 15, Issue 2, 2018, Pages 38-51]

  • Shojaei, Z. Removal of Cerium from Aqueous Solutions by Amino Phosphate Modified Nano TiO2: Kinetic, and Equilibrium Studies [Volume 13, Issue 2, 2016, Pages 3-21]

  • Shojaosadati, S. A Optimization of factors affecting on sulfide oxidation from synthetic spent caustic by Haloalkaliphilic Thioalkalivibrio versutus by focus on sodium ion effect: Application of response surface methodology [Volume 14, Issue 1, 2017, Pages 74-87]

  • Shojaosadati, S. A. Assessment of Bioavailability of Crude Oil in Three Different Agricultural Soils [Volume 12, Issue 1, 2015, Pages 3-12]

  • Shokouhi, M. Experimental Investigation on the Solubility and Initial Rate of Absorption of CO2 in Mixture of Amine-Functionalized Ionic Liquids and Physical Solvents [Volume 12, Issue 1, 2015, Pages 68-77]

  • Shokrollahzadeh, S. Comparison the performance of different reverse osmosis membrane modules by CFD modeling [Volume 16, Issue 1, 2019, Pages 101-116]

  • Sinkakarimi, A. CFD Study of Concave Turbine [Volume 16, Issue 2, 2019, Pages 103-118]

  • Sirousazar, M. Fractional Calculus Method Applied To the Apple Rings Candying in Osmotic Drying Process [Volume 17, Issue 1, 2020, Pages 90-102]

  • Sobhanian, Fahimeh Mixing of the Immiscible Liquids in the Entrance Region of a T-Type Chamber Using Laser Induced Fluorescence (LIF) Method [Volume 13, Issue 3, 2016, Pages 32-42]

  • Soltani, H Optimization of Hydrogen Distribution Network by Imperialist Competitive AlgorithmIn [Volume 13, Issue 3, 2016, Pages 63-77]

  • Soltani, Hadi Isothermal Reactor Network Synthesis Using Coupled NonDominated Sorting Genetic Algorithm-II (NSGAII) with Quasi Linear Programming (LP) Method [Volume 12, Issue 3, 2015, Pages 77-95]

  • Soltani, S. Prediction of polyvinyl alcohol (PVOH) properties synthesized at various conditions by artificial neural networks technique [Volume 14, Issue 2, 2017, Pages 3-16]

  • Soodmand, M. H. Modeling and Simulation of a Divided Wall Column for 1,3 Butadiene Purification [Volume 12, Issue 1, 2015, Pages 60-67]

  • Soroushnia, Arezou Transdermal Delivery of Desmopressin Acetate from Water-in- Oil Nano/submicron Emulsion Systems [Volume 13, Issue 4, 2016, Pages 1-13]

  • Sotude.Gharebagh, R. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]

  • S P, Manjunath Development and Evaluation of the Magnesium Potassium Phosphate Cement Based Refractory [Volume 17, Issue 4, 2020, Pages 69-78]

  • Srivastava, Sh. Kinetic, mechanistic and thermodynamic investigations on Iridium (III) catalyzed oxidation of D-Mannitol by N-chloro-p-toluenesulfonamide in perchloric acid medium [Volume 14, Issue 4, 2017, Pages 77-89]

T

  • Tabar Heidar, K. Effect of electrokinetic on biodegradation of fluorene and phenanthrene in soil [Volume 13, Issue 2, 2016, Pages 71-79]

  • Tabibiazar, M. A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]

  • Taeb, A. Effect of drying rate on the performance of Pt-Sn-K/γ-Al2O3 catalyst for propane dehydrogenation [Volume 18, Issue 1, 2021, Pages 16-24]

  • Taghizadeh, Seyed Mojtaba Transdermal Delivery of Desmopressin Acetate from Water-in- Oil Nano/submicron Emulsion Systems [Volume 13, Issue 4, 2016, Pages 1-13]

  • Taheri, P. Preparation and Drug-Delivery Properties of Metal-Organic Framework HKUST-1 [Volume 16, Issue 4, 2019, Pages 73-80]

  • Tahmasbi, Saeed Application of ANFIS and Sobol approaches for optimization and sensitivity assessment of triglyceride biosorption from blood serum [Volume 19, Issue 1, 2022]

  • Tahmasbi, Vahid Application of ANFIS and Sobol approaches for optimization and sensitivity assessment of triglyceride biosorption from blood serum [Volume 19, Issue 1, 2022]

  • Tahriri zangeneh, F. Effect of drying rate on the performance of Pt-Sn-K/γ-Al2O3 catalyst for propane dehydrogenation [Volume 18, Issue 1, 2021, Pages 16-24]

  • Takht Ravanchi, M. The Effect of the Method of Adding Impregnation Solutions on the Properties and Performance of the Pd-Ag/Al2O3 Catalyst in the Tail-End Acetylene Selective Hydrogenation. [Volume 18, Issue 2, 2021, Pages 19-30]

  • Talaghat, M. r. Nelder-Mead algorithm optimization and Galerkin’s method thermal performance analysis of circular porous fins with various profiles in fully wet conditions [Volume 16, Issue 3, 2019, Pages 37-57]

  • Talaghat, M.R. Optimization of Semiregenerative Catalytic Naphtha Reforming Unit to Enhance Octane Number and Reformate Yield [Volume 15, Issue 2, 2018, Pages 52-64]

  • Talebizadeh, A.R. Methane oxy-steam reforming over a highly efficient Ni/Al2O3 nanocatalyst prepared by microwave-assisted impregnation method [Volume 14, Issue 4, 2017, Pages 3-16]

  • Tarjomannejad, A. Catalytic oxidation of toluene over LaBO3 (B= Fe, Mn and Co) and LaCo0.7B′0.3O3 (B′= Fe and Mn) perovskite-type [Volume 14, Issue 1, 2017, Pages 67-73]

  • Tarjomannejad, A. Experimental and Kinetic Study of CO Oxidation Over LaFe1-xCuxO3 (x=0, 0.2, 0.4, 0.6) Perovskite-Type Oxides [Volume 15, Issue 2, 2018, Pages 91-102]

  • Tohfegar, E. The Influences of the Nanoparticles Related Parameters on the Tensile Strength of Polymer Nanocomposites [Volume 17, Issue 1, 2020, Pages 65-78]

  • Tohfegar, E. Synthesis and Characterization of Waterglass-Based Silica Aerogel Under Heat Treatment for Adsorption of Nitrate from Water: Batch and Column Studies [Volume 16, Issue 4, 2019, Pages 53-72]

  • Torab-Mostaedi, M. Removal of Cerium from Aqueous Solutions by Amino Phosphate Modified Nano TiO2: Kinetic, and Equilibrium Studies [Volume 13, Issue 2, 2016, Pages 3-21]

  • Torab-Mostaedi, M. Stochastic Comparisons of Probability Distribution Functions with Experimental Data in a Liquid-Liquid Extraction Column for Determination of Drop Size Distributions [Volume 14, Issue 3, 2017, Pages 82-95]

  • Towfighi, J. Characterization and optimization of SAPO-34 catalysts synthesized by mixed templates in MTO reaction [Volume 12, Issue 4, 2015, Pages 4-14]

V

  • Vaferi, B. Mathematical simulation of thermal behavior of moving bed reactors [Volume 14, Issue 4, 2017, Pages 48-58]

  • Vahidi, O. Induced tissue cell death by magnetic nanoparticle hyperthermia for cancer treatment: an in silico study [Volume 14, Issue 4, 2017, Pages 59-79]

  • Vahidi, O. Designing a glycemic control strategy to maintain glucose homeostasis and prevent hypoglycemia for subjects with type 1 diabetes [Volume 15, Issue 3, 2018, Pages 34-52]

  • Varmazyar, M. Dynamic Behavior of an Oil Droplet Adhered to the Wall Surface in a Channel Flow by the Lattice Boltzmann Method [Volume 15, Issue 1, 2018, Pages 35-48]

  • Verma, A. Kinetic, mechanistic and thermodynamic investigations on Iridium (III) catalyzed oxidation of D-Mannitol by N-chloro-p-toluenesulfonamide in perchloric acid medium [Volume 14, Issue 4, 2017, Pages 77-89]

  • Vossoughi, Manoucher Kinetics investigation of cell growth, xanthan production and sugar cane molasses consumption by Xanthomonas campestris [Volume 12, Issue 4, 2015, Pages 84-92]

Y

  • Yasemi, M. Microfluidic extraction of tannic acid from Quercus leaves [Volume 15, Issue 3, 2018, Pages 15-33]

  • Yasrebi, N. Study on the Effect of Humidity on Electrical Properties of Copper-Silica Aerogel [Volume 12, Issue 2, 2015, Pages 3-12]

  • Yavari, N. Modified and unmodified Graphite/unsaturated polyester resin composites: thermal and mechanical behavior [Volume 17, Issue 2, 2020, Pages 14-33]

  • Yazdian, F. Anticancer and Antioxidant Properties of Ag NPs Coated with BSA NPs [Volume 12, Issue 1, 2015, Pages 22-29]

  • Yegani, R. CO2 biofixation by Dunaliella Salina in batch and semi-continuous cultivations, using hydrophobic and hydrophilic poly ethylene (PE) hollow fiber membrane photobioreactors [Volume 13, Issue 1, 2016, Pages 47-59]

  • Younesi, H. Synthesis of a high characteristics activated carbon from walnut shell for the removal of Cr (VI) and Fe (II) from aqueous solution: single and binary solutes adsorption [Volume 12, Issue 4, 2015, Pages 28-51]

  • Yousefi, A. Prediction of the pharmaceutical solubility in water and organic solvents via different soft computing models [Volume 16, Issue 1, 2019, Pages 83-100]

  • Youssef, A. Thermal Conductivity of Water Based Nanofluids Containing Decorated Multi Walled Carbon Nanotubes with Different Amount of TiO2 Nanoparticles [Volume 12, Issue 1, 2015, Pages 30-40]

Z

  • Zabihollahpoor, A. Assessment of effective factors on bacterial oxidation of ferrous iron by focusing on sweetening natural gas [Volume 15, Issue 1, 2018, Pages 18-34]

  • Zakeri, Ali Kinetics investigation of cell growth, xanthan production and sugar cane molasses consumption by Xanthomonas campestris [Volume 12, Issue 4, 2015, Pages 84-92]

  • Zakeri, M. Incorporation of Metal Oxide on Mica Flakes as a Green Pearlescent Pigment: Preparation and Analysis [Volume 17, Issue 2, 2020, Pages 34-43]

  • Zakhireh, Solmaz High-performance hydroxyapatite scaffold combined with selenium and reduced graphene oxide for bone regeneration applications [Volume 19, Issue 1, 2022]

  • Zangouie, M. Study of the Industrial Wastewater Treatment by a Membrane Bioreactor (MBR) Case Study: Cookie Factory Wastewater [Volume 17, Issue 3, 2020, Pages 74-84]

  • Zarei, M. A. An Empirical Correlation to Predict the Ignition Delay Time for Some Hydrocarbon Fuels [Volume 13, Issue 1, 2016, Pages 84-97]

  • Zarei, T. Experimental study of hydrodynamic characteristics of improved sieve tray with push valves [Volume 14, Issue 1, 2017, Pages 40-51]

  • Zarghami, R. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]

  • Zarghami, Reza Effect of isopropanol on fluidization of hydrophilic titanium nano-powder [Volume 19, Issue 2, 2022]

  • Zebarjad, S. M. Thermal Conductivity of Water Based Nanofluids Containing Decorated Multi Walled Carbon Nanotubes with Different Amount of TiO2 Nanoparticles [Volume 12, Issue 1, 2015, Pages 30-40]

  • Zeynali, M. E. Effect of operating conditions on divinylbenzene production in diethyl benzene dehydrogenation reactor [Volume 15, Issue 4, 2018, Pages 93-104]

  • Ziaei Rad, Z. Biological Conversion of Normal Chain Octadecane by Native Microbial Consortia [Volume 12, Issue 2, 2015, Pages 50-58]

  • Ziarifar, Amir Simulation, Control and Experimental Analysis of 1,3Butadiene Purification Unit [Volume 13, Issue 4, 2016, Pages 33-45]

  • Zivdar, M. Modeling and Simulation of a Divided Wall Column for 1,3 Butadiene Purification [Volume 12, Issue 1, 2015, Pages 60-67]