Iranian Journal of Chemical Engineering(IJChE)

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ALL

A

Aasadi, H. A review on the effects of fillers on gas separation Mixed Matrix Membranes [Volume 19, Issue 3, 2022, Pages 3-28]
Abbasi, I. Screening and Optimization of Gas Sweetening Process Parameters with MDEA-PZ Solvent using Plackett-Burman Approach [Volume 20, Issue 3, 2023, Pages 70-89]
Abbasi, P. Optimization and Comparison of Ni and Cd Removal Using Zinc Powder with the Response Surface Methodology [Volume 17, Issue 4, 2020, Pages 3-20]
Abbasi, P. Effect of Particle Size of Zinc Powder on the Efficiency of Ni-Cd Cementation in Cold Purification Reactor [Volume 20, Issue 3, 2023, Pages 90-103]
Abbasi, S. Synthesis of SnO2 and ZnO Nanoparticles and SnO2-ZnO Hybrid for the Photocatalytic Oxidation of Methyl Orange [Volume 12, Issue 3, 2015, Pages 96-105]
Abbasi, S. Thermal Conductivity of Water Based Nanofluids Containing Decorated Multi Walled Carbon Nanotubes with Different Amount of TiO2 Nanoparticles [Volume 12, Issue 1, 2015, Pages 30-40]
Abbasi, S. An experimental investigation on the effect of acid treatment of MWCNTs on the viscosity of water based nanofluids and statistical analysis of viscosity in prepared nanofluids [Volume 15, Issue 3, 2018, Pages 72-81]
Abbasi Souraki, B. Simulation of Leaching of Starch from Potato in a Batch Extractor [Volume 12, Issue 2, 2015, Pages 26-36]
Abdi, A. Application of artificial neural network in deoxygenation of water by glucoseoxidase immobilized in calcium alginate/MnO2 composite [Volume 15, Issue 3, 2018, Pages 82-93]
Abdolahzadeh, H. Synthesis the Bioactive Conjugates of Nisin-Xanthan through the Maillard Reaction at Moderate Temperature [Volume 20, Issue 1, 2023, Pages 78-91]
Abdollahi, A. Synthesis and Investigation of Stimuli-Responsive Amphiphilic Latex Nanoparticles by Seeded Emulsion Polymerization [Volume 17, Issue 1, 2020, Pages 79-89]
Abdollahi, M. Application and Comparison of MAF-66 with AC and CMS in Vacuum Swing Adsorption Process for CO2 Capture from Flue Gas [Volume 20, Issue 4, 2024, Pages 56-72]
Abdolmaleki, M. Predicting Kinematic Viscosity and Cetane Number of Diesel- Biodiesel Blend Using Neural Network and Empirical Models [Volume 19, Issue 3, 2022, Pages 81-94]
Abedin, H. Study of Light Wavelength Dependency in Red-Orange Spectrum on Continuous Culture of Synechocystis sp. PCC6803 [Volume 16, Issue 4, 2019, Pages 3-11]
Abedini, H. Effect of operating conditions on divinylbenzene production in diethyl benzene dehydrogenation reactor [Volume 15, Issue 4, 2018, Pages 93-104]
Abedini, H. Reactor modeling and kinetic parameters estimation for diethylbenzene (DEB) dehydrogenation reactions [Volume 16, Issue 3, 2019, Pages 23-36]
Abedzadegan, T. Comparison of Different Methods (Digestion, Combustion, Gasification and Pyrolysis) for Sludge Energy Recovery: A Case Study for Ekbatan’s Municipal Treatment Plant [Volume 16, Issue 1, 2019, Pages 70-83]
Abidemi, G. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]
Abimannan, P. Phase-transfer catalysis for synthesis of ethyl 2-(4-nitrophenoxy)acetate under sonication- kinetic aspects [Volume 13, Issue 2, 2016, Pages 80-87]
Abimannan, Pachaiyappan Synthesis of 1-(isopentyloxy)-4-nitrobenzene under ultrasound assisted liquid-liquid phase-transfer catalysis [Volume 13, Issue 3, 2016, Pages 54-62]
Abolhasani, Mahdieh Investigating the Performance of an Ultrasound-Assisted Rotating Packed Bed Reactor for the Enhancement of the Micromixing Efficiency [Volume 18, Issue 4, 2021, Pages 49-63]
Abou Qurn, R. Cyclic Voltammetry of Cobalt Chloride with L- Carrageenan (LK) Using Glassy Carbon Electrode [Volume 14, Issue 4, 2017, Pages 90-99]
Ader, F. Investigating the Effects of Hollow Graphene Oxide Nanoparticles on the Thermal/Mechanical Properties of Polymer Nanocomposites: Experimental, Analytical and Simulation Approaches [Volume 18, Issue 2, 2021, Pages 71-83]
Afrous, Ali Assessing the Impact of Hydraulic Retention Time and Sawdust on the Elimination of Pb and Co from Oily Wastewater via Vertical-Flow Constructed Wetlands (VFCWs) with Phragmites Australis Cultivation. [Volume 21, Issue 1, 2024]
Aghamiri, F. Effect of MgAl2O4 catalyst support synthesis method on the catalytic activity of nickel Nano catalyst in reverse water gas shift reaction [Volume 16, Issue 3, 2019, Pages 58-69]
Ahmadi, R. The Effect of the Methyl Functional Group on the Physicochemical and Structural Properties of a Synthesized Semi-Aromatic Polyimides [Volume 19, Issue 2, 2022, Pages 89-99]
Ahmadi Danesh Ashtian, H. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]
Ahmadpour, A. Investigation of spent caustic wastewater treatment through response surface methodology and artificial neural network in a photocatalytic reactor [Volume 15, Issue 1, 2018, Pages 46-72]
Akbari, A. Removal of Pb (II) From Wastewater Using Henna; Optimization of Operational Conditions [Volume 15, Issue 4, 2018, Pages 17-26]
Akbari, M.H. Increasing flow capacity and reducing drag in microtubes using drag-reducing polymer [Volume 17, Issue 2, 2020, Pages 70-87]
Akbarzadeh, Abolfazl Synthesis and Characterization of Doxorubicin Coated with Magnetic Copolymer Polycaprolactone-Polyethylene Glycol for Use in the Cancer Treatment [Volume 18, Issue 4, 2021, Pages 36-48]
Alborzi, A. Modeling and Simulation of a Divided Wall Column for 1,3 Butadiene Purification [Volume 12, Issue 1, 2015, Pages 60-67]
Ale ebrahim, H. Catalytic reduction of SO2 with CH4 to elemental sulfur: A comparative analysis of alumina, copper-alumina and nickel-alumina catalysts [Volume 15, Issue 3, 2018, Pages 94-107]
Alibolandi, M. Production of Bio-Gasoline with High Octane Number, as a Renewable Transportation Biofuel, via Thermochemical Conversion of Castor Oil [Volume 17, Issue 3, 2020, Pages 3-23]
Alihemati, Z. Response Surface Methodology for Investigating the Effects of Hydrolysis Reaction Parameters on Molecular Structure and Performance of Polyvinyl Alcohol as Primary Suspending Agent [Volume 14, Issue 1, 2017, Pages 52-66]
Alimohammadi, Nemat Comparing the Performance of Heterogeneous Pd-Supported Catalysts: Pd/ZSM-5, Pd/13X and Pd/Al2O3 for the Hydrogenation of Benzene in a Mixture of Normal Heptane and Benzene [Volume 18, Issue 4, 2021, Pages 3-19]
Alipour, A. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
Alizadeh, O. Investigating the Impact of Air Injection on the Thermal Performance of Helical Tube with Varying Helix Diameters: Downward Flow [Volume 19, Issue 2, 2022, Pages 38-50]
Alizadeh, O. A review on the effects of fillers on gas separation Mixed Matrix Membranes [Volume 19, Issue 3, 2022, Pages 3-28]
Alizadeh, O. Improving the performance of a two-phase ejector using genetic algorithm based on secondary fluid entrainment rate [Volume 19, Issue 4, 2022, Pages 95-109]
Alizadeh, R. Thermodynamic and Heat Transfer Evaluation of Pocket Drying Section in the Multi-Cylinder Dryers of Paper Machine [Volume 13, Issue 2, 2016, Pages 57-70]
Alizadeh, R. Fractional Calculus Method Applied To the Apple Rings Candying in Osmotic Drying Process [Volume 17, Issue 1, 2020, Pages 90-102]
Alizadeh, Reza Ultrasonic Assisted Synthesis and Characterization of xCuO/CeO2–γAl2O3 Nanoatalysts [Volume 13, Issue 3, 2016, Pages 43-53]
Alizadeh, T. Improvement of the Metal Extraction and Removal of Harmful Impurities from Sulfide Ores by Polyoxometalate Oxidizers: Design of Experiments and Industrial Modeling [Volume 20, Issue 3, 2023, Pages 21-54]
Almasi, A. Degradation of Diclofenac Sodium under Solar Light Irradiation by Photocatalytic Performance of ZnO and V2O5 [Volume 15, Issue 4, 2018, Pages 1-16]
Almasi, N. CFD modeling of the effect of magnetic field on heat transfer coefficient and ferrofluid flow in a micromixer [Volume 20, Issue 1, 2023, Pages 22-35]
Almasvandi, Mo. H. Waste water ammonia stripping intensification using microfluidic system [Volume 14, Issue 4, 2017, Pages 17-31]
Amarowicz, R. A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]
Amini, M. Application of Turbo-Expander for Greenhouse Gas and Air Pollutant Emissions Reduction Using Exergy and Economical Analysis [Volume 14, Issue 4, 2017, Pages 32-47]
Amirabedi, Parya Mathematical Modeling and Parameters Optimization of the Degradation of Acrylonitrile in Biofilters [Volume 18, Issue 3, 2021, Pages 3-15]
Amiri, F. Optimization of cultivation conditions of Candida catenulata in synthesizing acidic sophorolipid [Volume 20, Issue 3, 2023, Pages 54-69]
Amiri, H. Simulation and optimization of energy in oil storage tanks using nanocomposite of phase change materials by Computational Fluid Dynamics [Volume 20, Issue 2, 2023, Pages 62-86]
Amirkhani, L. Investigating the Influence of Nanoclosite Particles on the Mechanical Properties of Polystyrene Using Artificial Neural Networks [Volume 18, Issue 2, 2021, Pages 59-70]
Amirkhani, Leila Optimization of Candida rugosa lipase immobilization parameters on magnetic silica aerogel using adsorption method [Volume 13, Issue 3, 2016, Pages 19-31]
Amirkhani, Leila Synthesis and Characterization of Doxorubicin Coated with Magnetic Copolymer Polycaprolactone-Polyethylene Glycol for Use in the Cancer Treatment [Volume 18, Issue 4, 2021, Pages 36-48]
Amirzadeh, S. Investigation of Bubble Characteristics by Photographic Method [Volume 19, Issue 3, 2022, Pages 69-80]
Amjadian, p. CFD modeling of the effect of magnetic field on heat transfer coefficient and ferrofluid flow in a micromixer [Volume 20, Issue 1, 2023, Pages 22-35]
Arabzadeh, R. Effect of silica particles on adhesion strength of polyvinyl chloride coatings on metal substrates [Volume 14, Issue 2, 2017, Pages 74-82]
Ardjmand, M. Microfluidic extraction of tannic acid from Quercus leaves [Volume 15, Issue 3, 2018, Pages 15-33]
Arinkoola, A. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]
Arjmand, R. Flocculation Behavior of Ultrafine Quartz and Magnetite as the Main Mineral Components of Iron Ore Tailings [Volume 18, Issue 2, 2021, Pages 3-18]
Arjomandi, H. Experimental, Kinetics and Isotherm Modeling of Carbon Dioxide Adsorption with 13X Zeolite in a fixed bed column [Volume 16, Issue 1, 2019, Pages 54-64]
Asadabadi, S. Adsorption Behavior of Short Alkyl Chain Imidazolium Ionic Liquidsat N-Butyl Acetate + Water Interface: Experiments and Modeling [Volume 12, Issue 2, 2015, Pages 59-74]
Asadi, S. Effect of the Carbon Source Flow Rate on the Quality of the Growth of Super-Aligned Carbon Nanotube Arrays by the Chemical Vapor Deposition Method [Volume 20, Issue 3, 2023, Pages 45-53]
Asadollahi, M. Two Phase Flow Pressure Drop Calculation Using Homogeneous Equilibrium Model [Volume 16, Issue 3, 2019, Pages 84-92]
Asadollahzadeh, M. Stochastic Comparisons of Probability Distribution Functions with Experimental Data in a Liquid-Liquid Extraction Column for Determination of Drop Size Distributions [Volume 14, Issue 3, 2017, Pages 82-95]
Ashitosh, K. Development and Evaluation of the Magnesium Potassium Phosphate Cement Based Refractory [Volume 17, Issue 4, 2020, Pages 69-78]
Ashrafizadeh, .S. N. Demuification of Water-in-Oil Emulsions by Means of Dielectrophoresis [Volume 17, Issue 3, 2020, Pages 24-40]
Ashrafizadeh, S. N. Dehydration of Natural Gas Using Synthesized Chabazite Zeolite Membranes [Volume 12, Issue 1, 2015, Pages 13-21]
Ashrafmansouri, ُS.Saba Predicting Ionic Liquids’ Second-Order Derivative Properties based on a Combination of SAFT-γ EoS and a GC Technique [Volume 18, Issue 1, 2021, Pages 56-70]
Atitebi, Z. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]
Azadi, P. Improvement of gas separation properties of polyurethane membrane using plasma grafting [Volume 14, Issue 3, 2017, Pages 19-30]
Azami, H. Biofouling Behavior on Forward Osmosis Using Vertically Aligned CNT Membrane on Alumina [Volume 16, Issue 2, 2019, Pages 1-13]
Azimi, M. Methanol crossover and selectivity of nafion/heteropolyacid/montmorillonite nanocomposite proton exchange membranes for DMFC applications [Volume 14, Issue 3, 2017, Pages 65-81]
Azimi, N. Cooling Enhancement of a Photovoltaic Panel Through Ferrofluid Stimulation Using a Magnetic-Wind Turbine [Volume 16, Issue 4, 2019, Pages 35-52]
Azimi, N. CFD modeling of the effect of magnetic field on heat transfer coefficient and ferrofluid flow in a micromixer [Volume 20, Issue 1, 2023, Pages 22-35]
Azimi, N. Simulation and optimization of energy in oil storage tanks using nanocomposite of phase change materials by Computational Fluid Dynamics [Volume 20, Issue 2, 2023, Pages 62-86]
Azimi, N. CFD Modeling of the Movement of Bladeless Wind Turbines [Volume 20, Issue 4, 2024, Pages 40-55]
Azimi, S. Simulation and investigation of thermodynamics and energy of methanol purification unit [Volume 19, Issue 3, 2022, Pages 95-107]
Azizi, M. Anticancer and Antioxidant Properties of Ag NPs Coated with BSA NPs [Volume 12, Issue 1, 2015, Pages 22-29]

B

Babaei, S. Effect of electrokinetic on biodegradation of fluorene and phenanthrene in soil [Volume 13, Issue 2, 2016, Pages 71-79]
Babaei Mohammadi, H. Ultrasound-Assisted Biodiesel Production in microreactors [Volume 13, Issue 2, 2016, Pages 22-32]
Babapoor, A. Simulation and optimization of energy in oil storage tanks using nanocomposite of phase change materials by Computational Fluid Dynamics [Volume 20, Issue 2, 2023, Pages 62-86]
Babic, S.Z. DESULFURIZATION AND DEMETALIZATION OF USED ENGINE OIL IN LABORATORY SCALE [Volume 15, Issue 1, 2018, Pages 73-88]
Bagheri, H. Plantwide Control Structure of the Diethyl Oxalate Process Concerning: Safety and Process Improvement [Volume 19, Issue 4, 2022, Pages 52-75]
Bahoosh, M. Comparison the performance of different reverse osmosis membrane modules by CFD modeling [Volume 16, Issue 1, 2019, Pages 101-116]
Bahrami, A. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
Bahramian, A. Hazards Identification and the Units Assessment of a the Water Treatment Plant Against Pathogenic and Biotoxin Threats Affecting by Physicochemical Parameters [Volume 17, Issue 4, 2020, Pages 33-48]
Bahramian, A. L. Theoretical Prediction of the Size and Lifetime of Evaporating Sneeze Droplets in a Confined Space: A Guideline to Control of COVID-19 Virus Transmission [Volume 19, Issue 2, 2022, Pages 68-88]
Bahramian, A. R. Hydrodynamic Characteristics of Dense Conical Fluidized Bed: CFD Simulation and Experimental Verification [Volume 12, Issue 1, 2015, Pages 42-59]
Bahramian*, A. R. CFD Insight of the Flow Dynamics and Velocity Fields in a Gas Turbine Combustor with a Swirl Flame [Volume 12, Issue 2, 2015, Pages 37-49]
Bahri rasht Abadi, M. M. Optimizing of Synthesis of High Purity HMX Using Polyphosphoric Acid by Response Surface Method [Volume 20, Issue 2, 2023, Pages 50-61]
Bahri Rasht Abadi, M. M Parasitic Effect of Tube Wall Longitudinal Heat Conduction on Cryogenic Gas Temperature [Volume 14, Issue 1, 2017, Pages 15-25]
Bahri Rasht Abadi, M. M Transient thermal study of recuperative tube in tube heat exchanger operating in refrigeration system using experimental test and mathematical simulation [Volume 14, Issue 3, 2017, Pages 3-18]
Bairami, A. Screening and Optimization of Gas Sweetening Process Parameters with MDEA-PZ Solvent using Plackett-Burman Approach [Volume 20, Issue 3, 2023, Pages 70-89]
Bakeri, Gh. Fabrication and characterization of polycarbonate/titanium oxide nanotubes mixed matrix membranes for efficient removal of cadmium and copper from aqueous solution [Volume 14, Issue 2, 2017, Pages 59-73]
Bakhshi, R. Fabrication and Characterization of Polysulfone-Graphene Oxide Mixed Matrix Membranes for the Natural Gas Treatment [Volume 19, Issue 2, 2022, Pages 21-37]
Bakhtiari, F. Assessing Nanostarch-Nanoclay Composite Film as a Potentially Durable Environmental-Friendly Packaging Material [Volume 20, Issue 3, 2023, Pages 3-20]
Bakhtiari, O. Modification of Mixed Matrix Membranes' Famous Permeability Prediction Models by Considering the Formed Voids Around Nonporous Fillers [Volume 17, Issue 3, 2020, Pages 53-73]
Bakhtiari, O. Investigation. effect. of mixed. matrix. membranes’. structural. parameters. on their. effective. gaseous. penetrant. diffusion. ratio using. CFD tools [Volume 19, Issue 4, 2022, Pages 3-19]
Baniamer, M. Degradation of Diclofenac Sodium under Solar Light Irradiation by Photocatalytic Performance of ZnO and V2O5 [Volume 15, Issue 4, 2018, Pages 1-16]
Bargan, Alexandra EXPERIMENTAL STUDIES OF SURFACE TENSIONS AND MODELING WITH NEURAL NETWORKS [Volume 21, Issue 1, 2024]
Barzegari, A. Fabrication of Chitosan-Polyethylene Oxide Electrospun Nanofibrous Mats Containing Green Tea Extract [Volume 15, Issue 2, 2018, Pages 65-77]
Barzin, J. Production and Characterization of Gelatine Based Electro-spun Nano-fibres as Burn Wound Dressings [Volume 14, Issue 1, 2017, Pages 3-14]
Bashiri, Sh. Predicting Kinematic Viscosity and Cetane Number of Diesel- Biodiesel Blend Using Neural Network and Empirical Models [Volume 19, Issue 3, 2022, Pages 81-94]
Basiri, M. Investigation of Liquid–Liquid Two-Phase Flow Pattern in Microreactors for Biodiesel Production [Volume 12, Issue 3, 2015, Pages 32-40]
Basiri, M. Ultrasound-Assisted Biodiesel Production in microreactors [Volume 13, Issue 2, 2016, Pages 22-32]
Bayat, Mahdi Enhancement of Hydrogen and Methanol Production using a Double Fluidized-bed Two Membranes Reactor [Volume 13, Issue 3, 2016, Pages 3-18]
Bayat, Mahdi Simultaneous high hydrogen content-synthesis gas production and in-situ CO2 removal via sorption-enhanced reaction process: modeling, sensitivity analysis and multi-objective optimization using NSGA-II algorithm [Volume 13, Issue 4, 2016, Pages 71-95]
Bazargan, M. Dynamic Behavior of an Oil Droplet Adhered to the Wall Surface in a Channel Flow by the Lattice Boltzmann Method [Volume 15, Issue 1, 2018, Pages 35-48]
Behnamfard, A. Flocculation Behavior of Ultrafine Quartz and Magnetite as the Main Mineral Components of Iron Ore Tailings [Volume 18, Issue 2, 2021, Pages 3-18]
Beigzadeh, R. Experimental and CFD Study of the Tube Configuration Effect on the Shell-Side Thermal Performance in a Shell and Helically Coiled Tube Heat Exchanger [Volume 12, Issue 2, 2015, Pages 13-25]
Beigzadeh, R. The CFD Provides Data for Adaptive Neuro-Fuzzy to Model the Heat Transfer in Flat and Discontinuous Fins [Volume 16, Issue 2, 2019, Pages 57-69]
Beigzadeh, R. Computational fluid dynamics study and GA modeling approach of the bend angle effect on thermal-hydraulic characteristics in zigzag channels [Volume 16, Issue 3, 2019, Pages 70-83]
Beigzadeh, R. Developing genetic algorithm-based neural networks and sensitivity analysis for thermal conductivity of natural gases [Volume 17, Issue 2, 2020, Pages 44-55]
Beygi-Khosrowshahi, Y. High-Performance Hydroxyapatite Scaffold Combined with Selenium and Reduced Graphene Oxide for Bone Regeneration Applications [Volume 19, Issue 1, 2022, Pages 66-76]
Bîrgăuanu, Iuliana EXPERIMENTAL STUDIES OF SURFACE TENSIONS AND MODELING WITH NEURAL NETWORKS [Volume 21, Issue 1, 2024]
Biswas, Sh. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]
Boulaqhi, Shirin Simulation, Control and Experimental Analysis of 1,3Butadiene Purification Unit [Volume 13, Issue 4, 2016, Pages 33-45]

C

Chegini, S. CO2 biofixation by Dunaliella Salina in batch and semi-continuous cultivations, using hydrophobic and hydrophilic poly ethylene (PE) hollow fiber membrane photobioreactors [Volume 13, Issue 1, 2016, Pages 47-59]
Cheraghipoor, M. Incorporation of Metal Oxide on Mica Flakes as a Green Pearlescent Pigment: Preparation and Analysis [Volume 17, Issue 2, 2020, Pages 34-43]
Curteanu, silvia Liquid-liquid equilibrium data prediction using large margin nearest neighbor [Volume 13, Issue 4, 2016, Pages 14-32]
Curteanu, Silvia EXPERIMENTAL STUDIES OF SURFACE TENSIONS AND MODELING WITH NEURAL NETWORKS [Volume 21, Issue 1, 2024]

D

Dadban, M. Modification of Montmorillonite and Prediction of Polymer/Clay Affinity Using Surface Properties and Lattice Model [Volume 12, Issue 3, 2015, Pages 41-54]
Danafar, F. Assessing Nanostarch-Nanoclay Composite Film as a Potentially Durable Environmental-Friendly Packaging Material [Volume 20, Issue 3, 2023, Pages 3-20]
Darvishi, P. A three-dimensional mathematical model for drug delivery from drug-eluting stents [Volume 12, Issue 4, 2015, Pages 15-27]
Das, A. CFD Modeling of the Movement of Bladeless Wind Turbines [Volume 20, Issue 4, 2024, Pages 40-55]
Dashtestani, F. Anticancer and Antioxidant Properties of Ag NPs Coated with BSA NPs [Volume 12, Issue 1, 2015, Pages 22-29]
Dashti, A. Synthesis and Investigation of Stimuli-Responsive Amphiphilic Latex Nanoparticles by Seeded Emulsion Polymerization [Volume 17, Issue 1, 2020, Pages 79-89]
Davoodbeygi, Y. Medium Temperature Shift Reaction Over Copper-Ceria catalyst in Fixed-Bed and Microchannel Reactors [Volume 18, Issue 1, 2021, Pages 46-51]
Davoodbeygi, Y. Investigation of the effect of DamKohler and Stanton non-dimensional numbers on the stability of continuous stirred tank reactors [Volume 18, Issue 2, 2021, Pages 48-58]
Davoodbeygi, Y. Simulation and investigation of thermodynamics and energy of methanol purification unit [Volume 19, Issue 3, 2022, Pages 95-107]
Dehestani, M. Stability and Rheological Behavior of Sulfonated Polyacrylamide/ Laponite Nanoparticles Dispersions in Electrolyte Media [Volume 14, Issue 3, 2017, Pages 41-54]
Dehghani, M. R. Observations of Sludge Formation in Group I Base Stock for Lubricants and Thermodynamic Modeling with the SAFT Equation of State [Volume 14, Issue 2, 2017, Pages 33-47]
Dehghan Lotfabad, A. Bubble formation on a single orifice in a gas solid fluidized bed using digital image analysis [Volume 13, Issue 1, 2016, Pages 60-72]
Dehghanzadeh, Reza Mathematical Modeling and Parameters Optimization of the Degradation of Acrylonitrile in Biofilters [Volume 18, Issue 3, 2021, Pages 3-15]
Delavar, M. Fabrication and characterization of polycarbonate/titanium oxide nanotubes mixed matrix membranes for efficient removal of cadmium and copper from aqueous solution [Volume 14, Issue 2, 2017, Pages 59-73]
Derakhshanfard, F. Investigating the Influence of Nanoclosite Particles on the Mechanical Properties of Polystyrene Using Artificial Neural Networks [Volume 18, Issue 2, 2021, Pages 59-70]
Dorosti, F. A review on the effects of fillers on gas separation Mixed Matrix Membranes [Volume 19, Issue 3, 2022, Pages 3-28]

E

Ebadi Amooghin, A. Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]
Ebadi Amooghin, A. The Effect of the Methyl Functional Group on the Physicochemical and Structural Properties of a Synthesized Semi-Aromatic Polyimides [Volume 19, Issue 2, 2022, Pages 89-99]
Ebadi Amooghin, A. 3D simulation of carbon monoxide purification with CuCl(7.0)/AC by pressure swing adsorption process [Volume 19, Issue 4, 2022, Pages 20-37]
Ebrahimi, E. Numerical Study of the Fluid Flow and Erosion-Corrosion in an Industrial Valve [Volume 20, Issue 1, 2023, Pages 3-21]
Ebrahimi, Nadereh Golshan Relationship between the Microstructure and Gas Transport Properties of Polyurethane/Polycaprolactone Blends [Volume 13, Issue 3, 2016, Pages 78-88]
Ekrami-Kakhki, M. S. Thermal Conductivity of Water Based Nanofluids Containing Decorated Multi Walled Carbon Nanotubes with Different Amount of TiO2 Nanoparticles [Volume 12, Issue 1, 2015, Pages 30-40]
Emami Satellou, A. A. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]
Entezari, K. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering [Volume 18, Issue 1, 2021, Pages 3-15]
Esfandiari, N. Effect of Solvent on the Optimal Thermodynamic Conditions of Ternary System (CO2, Alcohol, Ampicillin) in GAS Process [Volume 17, Issue 1, 2020, Pages 37-46]
Esfandiari, N. Determining the Optimal Thermodynamic Conditions of Ternary Systems Containing (CO2, Solvent, 5-Fluorouracil) in the GAS Process [Volume 19, Issue 1, 2022, Pages 3-14]
Es,Hagi, A. Reduction of fouling in the membrane bioreactor using the combination of electrochemical and adsorbention processees [Volume 20, Issue 2, 2023, Pages 90-107]
Esmaeilzadeh-Dilmaghani, S. Synthesis and Characterization of Waterglass-Based Silica Aerogel Under Heat Treatment for Adsorption of Nitrate from Water: Batch and Column Studies [Volume 16, Issue 4, 2019, Pages 53-72]
Etebarian, M. Prediction of true critical temperature and pressure of binary hydrocarbon mixtures: A Comparison between the artificial neural networks and the support vector machine [Volume 16, Issue 2, 2019, Pages 14-40]
Etemadi, A. Fractional Calculus Method Applied To the Apple Rings Candying in Osmotic Drying Process [Volume 17, Issue 1, 2020, Pages 90-102]
Etesami, N. Adsorption and Desorption Process of Chromium Ions Using Magnetic Iron Oxide Nanoparticles and Its Relevant Mechanism [Volume 14, Issue 3, 2017, Pages 31-40]
Etesami, N. Effect of Electrohydrodynamic (EHD) on the Drying Rate of Polymer Films Based on the Heat and Mass Transfer [Volume 17, Issue 3, 2020, Pages 41-52]

F

Fadhil, S. Modeling of Nanofiltration of Low Concentration Pb(II) Aqueous Solutions Using a Coupled Concentration Polarization and Pore Flow Model [Volume 16, Issue 4, 2019, Pages 12-22]
Fakhroleslam, M. Prediction of the Effect of Polymer Membrane Composition in a Dry Air Humidification Process via Neural Network Modeling [Volume 13, Issue 1, 2016, Pages 73-83]
Fakhroleslam, M. Application and Comparison of MAF-66 with AC and CMS in Vacuum Swing Adsorption Process for CO2 Capture from Flue Gas [Volume 20, Issue 4, 2024, Pages 56-72]
Fallah, D. Optimizing of Synthesis of High Purity HMX Using Polyphosphoric Acid by Response Surface Method [Volume 20, Issue 2, 2023, Pages 50-61]
Fallah, N. Investigation of spent caustic wastewater treatment through response surface methodology and artificial neural network in a photocatalytic reactor [Volume 15, Issue 1, 2018, Pages 46-72]
Fallahdoost Moghadam, S. Investigating the Performance of the Graphene-WO3-TiO2 Ternary Composite in Dye-Sensitized Solar Cells [Volume 20, Issue 4, 2024, Pages 13-26]
Fallahi-Samberan, M. Simulation and optimization of energy in oil storage tanks using nanocomposite of phase change materials by Computational Fluid Dynamics [Volume 20, Issue 2, 2023, Pages 62-86]
Farahbod, F. Synthesis of SnO2 and ZnO Nanoparticles and SnO2-ZnO Hybrid for the Photocatalytic Oxidation of Methyl Orange [Volume 12, Issue 3, 2015, Pages 96-105]
Faraji, H. CFD Modeling of Hydrocarbon-Air System Hydrodynamics in Three Types of Column Reactors [Volume 17, Issue 1, 2020, Pages 47-64]
Farajzadeh, S. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
Faramarzi, S. Simulation and investigation of thermodynamics and energy of methanol purification unit [Volume 19, Issue 3, 2022, Pages 95-107]
Farhadi, F. CFD simulation for segregation behavior of a ternary mixture in a bubbling fluidized bed: effect of solid wall boundary condition [Volume 15, Issue 3, 2018, Pages 53-71]
Faridvand, Ramin Preparation of Flame Retardant Polystyrene via In-Situ Bulk Polymerization Method and Evaluation of its Flammability Properties [Volume 13, Issue 4, 2016, Pages 62-70]
Farzaneh, V. Hydroconversion of Furfural over Cu-Cr/SiO2 Nanocatalysts: A Comparative Study [Volume 15, Issue 2, 2018, Pages 38-51]
Fasihi, M. Effect of silica particles on adhesion strength of polyvinyl chloride coatings on metal substrates [Volume 14, Issue 2, 2017, Pages 74-82]
Fatehifar, Esmaeil Ultrasonic Assisted Synthesis and Characterization of xCuO/CeO2–γAl2O3 Nanoatalysts [Volume 13, Issue 3, 2016, Pages 43-53]
Fatemi, Sh. Application and Comparison of MAF-66 with AC and CMS in Vacuum Swing Adsorption Process for CO2 Capture from Flue Gas [Volume 20, Issue 4, 2024, Pages 56-72]
Fathollahi, Manoochehr Optimization of the Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide Based Respiratory Air Tablets Using the Taguchi Method [Volume 18, Issue 4, 2021, Pages 81-98]
Fattahi, F. S. A Comprehensive Study on the Kinetics and Thermodynamic Aspects of CI Acid Red 1 Dyeing on Wool [Volume 19, Issue 1, 2022, Pages 33-50]
Fattahi, M. Enhancing Photocatalytic Activity of Nitrogen Doped TiO2 for Degradation of 4-Chlorophenol under Solar Light Irradiation [Volume 15, Issue 3, 2018, Pages 3-14]
Fattahi, M. Metal-Organic Frameworks in Systems of Drug Delivery: Review [Volume 20, Issue 1, 2023, Pages 36-50]
Fattahi, T. Intensification of Azeotropic Distillation for Ethanol Dehydration using Data-based Optimization, Steady-state Simulation and Sensitivity Analysis [Volume 20, Issue 2, 2023, Pages 15-32]
Fatthi, Sohrab Comparing the Performance of Heterogeneous Pd-Supported Catalysts: Pd/ZSM-5, Pd/13X and Pd/Al2O3 for the Hydrogenation of Benzene in a Mixture of Normal Heptane and Benzene [Volume 18, Issue 4, 2021, Pages 3-19]
Fauzi Ismail, A. Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]
Fazeli, N. Optimization of Synthesis of Expandable Polystyrene by Multi-Stage Initiator Dosing [Volume 13, Issue 1, 2016, Pages 20-31]
Fazeli, N. Production and Characterization of Gelatine Based Electro-spun Nano-fibres as Burn Wound Dressings [Volume 14, Issue 1, 2017, Pages 3-14]
Feyzi, F. Observations of Sludge Formation in Group I Base Stock for Lubricants and Thermodynamic Modeling with the SAFT Equation of State [Volume 14, Issue 2, 2017, Pages 33-47]
Feyzi, M. An optimization study by response surface methodology (RSM) on viscosity reduction of residue fuel oil exposed ultrasonic waves and solvent injection [Volume 13, Issue 1, 2016, Pages 3-19]
Feyzi, M. Biodiesel production from soybean oil using ionic liquid as a catalyst in a microreactor [Volume 15, Issue 1, 2018, Pages 102-114]
Foruzanfar, R. Stability and Rheological Behavior of Sulfonated Polyacrylamide/ Laponite Nanoparticles Dispersions in Electrolyte Media [Volume 14, Issue 3, 2017, Pages 41-54]

G

Ganji, Fariba Transdermal Delivery of Desmopressin Acetate from Water-in- Oil Nano/submicron Emulsion Systems [Volume 13, Issue 4, 2016, Pages 1-13]
Ganjizade, A. Demuification of Water-in-Oil Emulsions by Means of Dielectrophoresis [Volume 17, Issue 3, 2020, Pages 24-40]
Ghaderi, A. Synthesis of SnO2 and ZnO Nanoparticles and SnO2-ZnO Hybrid for the Photocatalytic Oxidation of Methyl Orange [Volume 12, Issue 3, 2015, Pages 96-105]
Ghaderi, E. Experimental Study and CFD Modeling of the Ohmic Heating Process in a Static Two-Phase Biosolid – Liquid System [Volume 12, Issue 2, 2015, Pages 75-87]
Ghadi, A. CFD Study of Concave Turbine [Volume 16, Issue 2, 2019, Pages 103-118]
Ghaemi, A. Prediction of Red Mud Bound-Soda Losses in Bayer Process Using Neural Networks [Volume 13, Issue 2, 2016, Pages 46-56]
Ghaemi, A. Experimental, Kinetics and Isotherm Modeling of Carbon Dioxide Adsorption with 13X Zeolite in a fixed bed column [Volume 16, Issue 1, 2019, Pages 54-64]
Ghaemi, Ahad Evaluation of the Silica Gel Adsorbent Potential for Carbon Dioxide Capture: Experimental and Modeling [Volume 18, Issue 4, 2021, Pages 64-80]
Ghafoori, Sepideh Effect of Synthesis Method and Nickel-Copper Loading on Ni-Cu-Al Catalysts for Production of Hydrogen Via Ethanol Steam Reforming [Volume 21, Issue 1, 2024]
Ghaheri, L. Biofouling Behavior on Forward Osmosis Using Vertically Aligned CNT Membrane on Alumina [Volume 16, Issue 2, 2019, Pages 1-13]
Ghanbari Pakdehi, Sh. An Empirical Correlation to Predict the Ignition Delay Time for Some Hydrocarbon Fuels [Volume 13, Issue 1, 2016, Pages 84-97]
Ghanbarnezhad, M. Synthesize and application of Fe3O4/MW-CNT Composite in photo-catalyst-assisted electrochemical oxidation of BTX compounds from wastewater [Volume 20, Issue 1, 2023, Pages 54-66]
Ghasemi, Ismaeil Polysulfone/ Carbon Nanotubes Asymmetric Nanocomposite Membranes: Effect of Nanotubes Surface Modification on Morphology and Water Permeability [Volume 12, Issue 4, 2015, Pages 69-83]
Ghasemi, M. Synthesis of a high characteristics activated carbon from walnut shell for the removal of Cr (VI) and Fe (II) from aqueous solution: single and binary solutes adsorption [Volume 12, Issue 4, 2015, Pages 28-51]
Ghasemi, S. Flocculation Behavior of Ultrafine Quartz and Magnetite as the Main Mineral Components of Iron Ore Tailings [Volume 18, Issue 2, 2021, Pages 3-18]
GhasemiKafrudi, E. Application of Turbo-Expander for Greenhouse Gas and Air Pollutant Emissions Reduction Using Exergy and Economical Analysis [Volume 14, Issue 4, 2017, Pages 32-47]
Ghasemkhani, Hamid Drying Apple Slices in a Rotating-Tray Convective Dryer: A Study on Dehydration Characteristics and Qualitative Attributes [Volume 18, Issue 3, 2021, Pages 16-32]
Ghashghaee, M. Hydroconversion of Furfural over Cu-Cr/SiO2 Nanocatalysts: A Comparative Study [Volume 15, Issue 2, 2018, Pages 38-51]
Ghavipanjeh*, F. Biological Conversion of Normal Chain Octadecane by Native Microbial Consortia [Volume 12, Issue 2, 2015, Pages 50-58]
Ghazanchaie, S. Investigating the Influence of Nanoclosite Particles on the Mechanical Properties of Polystyrene Using Artificial Neural Networks [Volume 18, Issue 2, 2021, Pages 59-70]
Ghazitabatabaei, Z. Studying the Influence of the Mixing Speed of the Polymer Blend of General-Purpose Polystyrene and Acrylonitrile-Butadiene Styrene with the Applications of Artificial Neural Networks [Volume 17, Issue 4, 2020, Pages 21-32]
Ghiassimehr, B. Removal of Pb (II) From Wastewater Using Henna; Optimization of Operational Conditions [Volume 15, Issue 4, 2018, Pages 17-26]
Ghobadi, F. Developing Collagen Hydrogel Including Bioactive Glass Nanoparticles for being used in Bone Tissue Engineering [Volume 20, Issue 4, 2024, Pages 3-12]
Ghobadian, B. Conceptual Design of a Batch Process for the Production of Biodiesel from High Free Fatty Acid Feedstocks [Volume 19, Issue 1, 2022, Pages 15-32]
Ghobadian, Barat Techno-Economic Optimization of a Continuous Process for the Biodiesel Production from Waste Vegetable Oils [Volume 18, Issue 4, 2021, Pages 20-35]
Ghodbanan, Sh. Thermodynamic and Heat Transfer Evaluation of Pocket Drying Section in the Multi-Cylinder Dryers of Paper Machine [Volume 13, Issue 2, 2016, Pages 57-70]
Ghorbani, Y. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
Ghorbanian, S. Effect of graphite oxidation on the yield and quality of graphene synthesized by supercritical exfoliation and its application in photocatalytic degradation of methylene blue [Volume 12, Issue 4, 2015, Pages 52-68]
Ghoreyshi, A. A. Synthesis of a high characteristics activated carbon from walnut shell for the removal of Cr (VI) and Fe (II) from aqueous solution: single and binary solutes adsorption [Volume 12, Issue 4, 2015, Pages 28-51]
Ghoreyshi, A. A. Extraction of pectin from sour orange and its application as the adsorbent for removal of nickel from aqueous solution: Kinetic and equilibrium study [Volume 15, Issue 2, 2018, Pages 3-21]
Ghoreyshi, A.A. Optimization of solvothermally synthesized ZIF-67 metal organic framework and its application for Cr(VI) adsorption from aqueous solution [Volume 15, Issue 4, 2018, Pages 27-47]
Ghourchian, H. Anticancer and Antioxidant Properties of Ag NPs Coated with BSA NPs [Volume 12, Issue 1, 2015, Pages 22-29]
Gilani, N. Investigating the Performance of the Graphene-WO3-TiO2 Ternary Composite in Dye-Sensitized Solar Cells [Volume 20, Issue 4, 2024, Pages 13-26]
Golhosseini, R. Optimization of the homogeneous rhodium-catalyzed methanol carbonylation reactor to reduce CO2 emissions [Volume 19, Issue 3, 2022, Pages 50-68]
Gomaa, E. Cyclic Voltammetry of Cobalt Chloride with L- Carrageenan (LK) Using Glassy Carbon Electrode [Volume 14, Issue 4, 2017, Pages 90-99]
Goodarzi, P. Kinetics of Propane Hydrate Formation in Agitated Reactor: A Mass Transfer Approach [Volume 14, Issue 2, 2017, Pages 48-58]
Gulcan, E. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]

H

Habibi, Al.R. Synthesis the Bioactive Conjugates of Nisin-Xanthan through the Maillard Reaction at Moderate Temperature [Volume 20, Issue 1, 2023, Pages 78-91]
Habibi, A. R. Optimization of cultivation conditions of Candida catenulata in synthesizing acidic sophorolipid [Volume 20, Issue 3, 2023, Pages 54-69]
Habibi, A.R. CFD Modeling of Hydrocarbon-Air System Hydrodynamics in Three Types of Column Reactors [Volume 17, Issue 1, 2020, Pages 47-64]
Habibi, M. R. Application of Turbo-Expander for Greenhouse Gas and Air Pollutant Emissions Reduction Using Exergy and Economical Analysis [Volume 14, Issue 4, 2017, Pages 32-47]
Hadi, A. Effect of graphite oxidation on the yield and quality of graphene synthesized by supercritical exfoliation and its application in photocatalytic degradation of methylene blue [Volume 12, Issue 4, 2015, Pages 52-68]
Hadi, N. CFD modeling for selective formation of propylene from methanol over synthesized Mn-substituted MFI metallosilicate catalyst [Volume 15, Issue 2, 2018, Pages 22-37]
Hadidi, A. Simulation and optimization of energy in oil storage tanks using nanocomposite of phase change materials by Computational Fluid Dynamics [Volume 20, Issue 2, 2023, Pages 62-86]
Hadi Najafabadi, Hossein Three-dimensional CFD modeling of fluid flow and heat transfer characteristics of Al2O3/water nanofluid in microchannel heat sink with Eulerian-Eulerian approach [Volume 13, Issue 4, 2016, Pages 46-61]
Haghighiasl, A. Investigation of spent caustic wastewater treatment through response surface methodology and artificial neural network in a photocatalytic reactor [Volume 15, Issue 1, 2018, Pages 46-72]
Hajiabadi, M. CFD Modeling of the Dehydration of Biofuels with the 2D MXene Membrane using the Pervaporation Process [Volume 19, Issue 1, 2022, Pages 77-89]
Hajilary, N. CFD Modeling of the Dehydration of Biofuels with the 2D MXene Membrane using the Pervaporation Process [Volume 19, Issue 1, 2022, Pages 77-89]
Hajimohammadi, Reza Synthesis and Characterization of Doxorubicin Coated with Magnetic Copolymer Polycaprolactone-Polyethylene Glycol for Use in the Cancer Treatment [Volume 18, Issue 4, 2021, Pages 36-48]
Hamedani, Y. Production and Characterization of Gelatine Based Electro-spun Nano-fibres as Burn Wound Dressings [Volume 14, Issue 1, 2017, Pages 3-14]
Hamidian, H. Stability and Rheological Behavior of Sulfonated Polyacrylamide/ Laponite Nanoparticles Dispersions in Electrolyte Media [Volume 14, Issue 3, 2017, Pages 41-54]
Hanon, K.H. Numerical Study of the Fluid Flow and Erosion-Corrosion in an Industrial Valve [Volume 20, Issue 1, 2023, Pages 3-21]
Haque, P. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]
Hasan, M. M. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]
Hasanzadeh, R. Simulation of Leaching of Starch from Potato in a Batch Extractor [Volume 12, Issue 2, 2015, Pages 26-36]
Hashemabadi, H. Prediction of Red Mud Bound-Soda Losses in Bayer Process Using Neural Networks [Volume 13, Issue 2, 2016, Pages 46-56]
Hashemi, S. CFD Modeling of the Dehydration of Biofuels with the 2D MXene Membrane using the Pervaporation Process [Volume 19, Issue 1, 2022, Pages 77-89]
Hashemi-Najafabadi, S. Assessment of Bioavailability of Crude Oil in Three Different Agricultural Soils [Volume 12, Issue 1, 2015, Pages 3-12]
Hashemipour rafsanjani, H. Methane oxy-steam reforming over a highly efficient Ni/Al2O3 nanocatalyst prepared by microwave-assisted impregnation method [Volume 14, Issue 4, 2017, Pages 3-16]
Hassanajili, Sh. Improvement of gas separation properties of polyurethane membrane using plasma grafting [Volume 14, Issue 3, 2017, Pages 19-30]
Hassanpour souderjani, H. Oxidative desulfurization of petroleum products using decorated cobalt oxide on the surface of modified carbon nanotubes-ICHEC-1887 [Volume 18, Issue 1, 2021, Pages 36-45]
Hatamipour, M. Sadegh Theoretical study of multi-stage and multi-feeding variable pressure humidification-dehumidification (VP-HD) desalination systems [Volume 21, Issue 1, 2024]
Hazrati, H. Fe3O4 Magnetic Nanoparticles/ Graphene Oxide Nanosheets/Carbon Cloth as an Electrochemical Sensing Platform [Volume 16, Issue 2, 2019, Pages 95-102]
Hazrati, H. Reduction of fouling in the membrane bioreactor using the combination of electrochemical and adsorbention processees [Volume 20, Issue 2, 2023, Pages 90-107]
Hefzi Lotfabadi, Mahdi Investigating the Performance of an Ultrasound-Assisted Rotating Packed Bed Reactor for the Enhancement of the Micromixing Efficiency [Volume 18, Issue 4, 2021, Pages 49-63]
Heidari, N. Cooling Enhancement of a Photovoltaic Panel Through Ferrofluid Stimulation Using a Magnetic-Wind Turbine [Volume 16, Issue 4, 2019, Pages 35-52]
Hejazi, M.A. CO2 biofixation by Dunaliella Salina in batch and semi-continuous cultivations, using hydrophobic and hydrophilic poly ethylene (PE) hollow fiber membrane photobioreactors [Volume 13, Issue 1, 2016, Pages 47-59]
Hejazi, P. Assessment of effective factors on bacterial oxidation of ferrous iron by focusing on sweetening natural gas [Volume 15, Issue 1, 2018, Pages 18-34]
Hemmati, A. Comparison of Different Methods (Digestion, Combustion, Gasification and Pyrolysis) for Sludge Energy Recovery: A Case Study for Ekbatan’s Municipal Treatment Plant [Volume 16, Issue 1, 2019, Pages 70-83]
Hemmati, A. Groundwater Denitrification by Using MBBR With KMT Packing [Volume 17, Issue 4, 2020, Pages 60-68]
Hemmati, A. Study of the Industrial Wastewater Treatment by a Membrane Bioreactor (MBR) Case Study: Cookie Factory Wastewater [Volume 17, Issue 3, 2020, Pages 74-84]
Hemmati, Azadeh Assessing the Impact of Hydraulic Retention Time and Sawdust on the Elimination of Pb and Co from Oily Wastewater via Vertical-Flow Constructed Wetlands (VFCWs) with Phragmites Australis Cultivation. [Volume 21, Issue 1, 2024]
Hemmati, H. Theoretical and Empirical Equilibrium Concentration for the Dry Reforming of Methane [Volume 18, Issue 2, 2021, Pages 31-47]
Hemmati, Hamed Investigating the Activity of the Supported Bimetallic Ni-Co Catalysts on the Dry Reforming of Methane [Volume 18, Issue 3, 2021, Pages 63-73]
Heravi, Malihe Simultaneous high hydrogen content-synthesis gas production and in-situ CO2 removal via sorption-enhanced reaction process: modeling, sensitivity analysis and multi-objective optimization using NSGA-II algorithm [Volume 13, Issue 4, 2016, Pages 71-95]
Heydarinasab, A. Optimization of Synthesis of Expandable Polystyrene by Multi-Stage Initiator Dosing [Volume 13, Issue 1, 2016, Pages 20-31]
Heydarinasab, A. Microfluidic extraction of tannic acid from Quercus leaves [Volume 15, Issue 3, 2018, Pages 15-33]
Hoorijani, H. Effect of Isopropanol on the Fluidization of Hydrophilic Titanium Nano-Powder [Volume 19, Issue 2, 2022, Pages 51-67]
Hoshyar, N. Copper Catalysts Supported on CeMnO2 for CO Oxidation in Hydrogen-Rich Gas Streams [Volume 12, Issue 3, 2015, Pages 3-14]
Hosseini, F. Propionic acid extraction in a microfluidic system: simultaneous effects of channel diameter and fluid flow rate on the flow regime and mass transfer [Volume 15, Issue 4, 2018, Pages 48-62]
Hosseini, M. Fabrication and characterization of polycarbonate/titanium oxide nanotubes mixed matrix membranes for efficient removal of cadmium and copper from aqueous solution [Volume 14, Issue 2, 2017, Pages 59-73]
Hosseini, M. Optimization and Comparison of Ni and Cd Removal Using Zinc Powder with the Response Surface Methodology [Volume 17, Issue 4, 2020, Pages 3-20]
Hosseini, M. Investigation of the effect of DamKohler and Stanton non-dimensional numbers on the stability of continuous stirred tank reactors [Volume 18, Issue 2, 2021, Pages 48-58]
Hosseini, S. A. A Study of Catalytic Performance of Co3O4 and Cu-Co Nano Metal Oxides in Combustion of Aromatics [Volume 14, Issue 2, 2017, Pages 83-90]
Hosseini, Seyyed Ghorban Optimization of the Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide Based Respiratory Air Tablets Using the Taguchi Method [Volume 18, Issue 4, 2021, Pages 81-98]
Hosseini, S. M. S. Methane oxy-steam reforming over a highly efficient Ni/Al2O3 nanocatalyst prepared by microwave-assisted impregnation method [Volume 14, Issue 4, 2017, Pages 3-16]
Hosseini, Z. Intensification of Azeotropic Distillation for Ethanol Dehydration using Data-based Optimization, Steady-state Simulation and Sensitivity Analysis [Volume 20, Issue 2, 2023, Pages 15-32]
Hosseini, Z. S. Synthesis and Investigation of Stimuli-Responsive Amphiphilic Latex Nanoparticles by Seeded Emulsion Polymerization [Volume 17, Issue 1, 2020, Pages 79-89]
Hosseini-Jenab, M. Experimental Investigation on the Solubility and Initial Rate of Absorption of CO2 in Mixture of Amine-Functionalized Ionic Liquids and Physical Solvents [Volume 12, Issue 1, 2015, Pages 68-77]
Hosseinnia, A. Biological Conversion of Normal Chain Octadecane by Native Microbial Consortia [Volume 12, Issue 2, 2015, Pages 50-58]
Houshyar, Sh. Stochastic Comparisons of Probability Distribution Functions with Experimental Data in a Liquid-Liquid Extraction Column for Determination of Drop Size Distributions [Volume 14, Issue 3, 2017, Pages 82-95]

I

Irankhah, A. Methanol Steam Reforming Catalyzing over Cu/Zn/Fe Mixed Oxide Catalysts [Volume 14, Issue 1, 2017, Pages 26-39]
Irankhah, A. Effect of MgAl2O4 catalyst support synthesis method on the catalytic activity of nickel Nano catalyst in reverse water gas shift reaction [Volume 16, Issue 3, 2019, Pages 58-69]
Irankhah, A. CFD Simulation of Methane Steam Micro-Reformer: Channel Design and Inlet/Outlet Configuration [Volume 16, Issue 4, 2019, Pages 23-35]
Irankhah, A. Medium Temperature Shift Reaction Over Copper-Ceria catalyst in Fixed-Bed and Microchannel Reactors [Volume 18, Issue 1, 2021, Pages 46-51]
Irankhah, A. Screening of important factors affecting the process of ammonia synthesis by Plackett-Burman method and process optimization with RSMScreening the Important Factors Affecting the Process of Ammonia Synthesized by the Plackett-Burman Method and the Process Optimization with RSM [Volume 19, Issue 2, 2022, Pages 3-20]
Irankhah, Abdullah Effect of Synthesis Method and Nickel-Copper Loading on Ni-Cu-Al Catalysts for Production of Hydrogen Via Ethanol Steam Reforming [Volume 21, Issue 1, 2024]
Irankhah, Abdullah The Impact of Liquid-Liquid Hydrodynamic Focusing on the Efficiency of Heterogeneous Microreactors: Numerical Solution [Volume 21, Issue 1, 2024]
Irankhah, A. Irankhah Copper Catalysts Supported on CeMnO2 for CO Oxidation in Hydrogen-Rich Gas Streams [Volume 12, Issue 3, 2015, Pages 3-14]
Iravani, E. Removal of Cerium from Aqueous Solutions by Amino Phosphate Modified Nano TiO2: Kinetic, and Equilibrium Studies [Volume 13, Issue 2, 2016, Pages 3-21]
Islam, Md. M. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]
Izadkhah, B. Catalytic oxidation of toluene over LaBO3 (B= Fe, Mn and Co) and LaCo0.7B′0.3O3 (B′= Fe and Mn) perovskite-type [Volume 14, Issue 1, 2017, Pages 67-73]
Izadkhah, M.Sh Application of artificial neural network in deoxygenation of water by glucoseoxidase immobilized in calcium alginate/MnO2 composite [Volume 15, Issue 3, 2018, Pages 82-93]

J

Jabbari, A.M. Fe3O4 Magnetic Nanoparticles/ Graphene Oxide Nanosheets/Carbon Cloth as an Electrochemical Sensing Platform [Volume 16, Issue 2, 2019, Pages 95-102]
Jadidi, M. Adsorption and Desorption Process of Chromium Ions Using Magnetic Iron Oxide Nanoparticles and Its Relevant Mechanism [Volume 14, Issue 3, 2017, Pages 31-40]
Jafari, M. Copper Catalysts Supported on CeMnO2 for CO Oxidation in Hydrogen-Rich Gas Streams [Volume 12, Issue 3, 2015, Pages 3-14]
Jafari, M. Methanol Steam Reforming Catalyzing over Cu/Zn/Fe Mixed Oxide Catalysts [Volume 14, Issue 1, 2017, Pages 26-39]
Jafarizadeh- Malmiri, Hoda Optimization of Candida rugosa lipase immobilization parameters on magnetic silica aerogel using adsorption method [Volume 13, Issue 3, 2016, Pages 19-31]
Jafarkhani, M. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering [Volume 18, Issue 1, 2021, Pages 3-15]
Jahanban-Esfahlan, A. A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]
Jahanban-Esfahlan, R. A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]
Jahangiri, Sahar Synthesis and Characterization of Doxorubicin Coated with Magnetic Copolymer Polycaprolactone-Polyethylene Glycol for Use in the Cancer Treatment [Volume 18, Issue 4, 2021, Pages 36-48]
Jahanshahi, M. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering [Volume 18, Issue 1, 2021, Pages 3-15]
Jalalvandi, K. Prediction of erosion rate in gas-solid flow using computational fluid dynamics (CFD): focus on geometrical parameters [Volume 20, Issue 2, 2023, Pages 33-49]
Jalili, A. H. Experimental Investigation on the Solubility and Initial Rate of Absorption of CO2 in Mixture of Amine-Functionalized Ionic Liquids and Physical Solvents [Volume 12, Issue 1, 2015, Pages 68-77]
Jalilnejad, E. CFD Modeling of Hydrocarbon-Air System Hydrodynamics in Three Types of Column Reactors [Volume 17, Issue 1, 2020, Pages 47-64]
Jalilpiran, M. Pilot Plant Scale Interesterification of Special Fat Blends to Prepare Zero-Trans Margarine: Monitoring the Fatty Acids content and Physicochemical Properties [Volume 19, Issue 4, 2022, Pages 76-94]
Jamekhorshid, A. A Comprehensive Study on a Latent Heat Thermal Energy Storage System and its Feasible Applications in Greenhouses [Volume 13, Issue 2, 2016, Pages 33-45]
Jimoh, M. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]
Jorfi, S. Enhancing Photocatalytic Activity of Nitrogen Doped TiO2 for Degradation of 4-Chlorophenol under Solar Light Irradiation [Volume 15, Issue 3, 2018, Pages 3-14]
Jorfi, S. Synthesize and application of Fe3O4/MW-CNT Composite in photo-catalyst-assisted electrochemical oxidation of BTX compounds from wastewater [Volume 20, Issue 1, 2023, Pages 54-66]

K

Kabir, H. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering [Volume 18, Issue 1, 2021, Pages 3-15]
Kadkhodayan, H. Improvement of the Metal Extraction and Removal of Harmful Impurities from Sulfide Ores by Polyoxometalate Oxidizers: Design of Experiments and Industrial Modeling [Volume 20, Issue 3, 2023, Pages 21-54]
Kakaei, H. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
Kakoui, N. Extraction of pectin from sour orange and its application as the adsorbent for removal of nickel from aqueous solution: Kinetic and equilibrium study [Volume 15, Issue 2, 2018, Pages 3-21]
Kalbasi, M. A Numerical Simulation Model of Solid Acid Fuel Cell Performance by CsH2PO4 Electrolyte [Volume 14, Issue 2, 2017, Pages 17-32]
Kamandar, Mohamad Reza Drying Apple Slices in a Rotating-Tray Convective Dryer: A Study on Dehydration Characteristics and Qualitative Attributes [Volume 18, Issue 3, 2021, Pages 16-32]
Karami, H.R. Increasing flow capacity and reducing drag in microtubes using drag-reducing polymer [Volume 17, Issue 2, 2020, Pages 70-87]
Kargari, A. Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]
Karimi, A. Application of artificial neural network in deoxygenation of water by glucoseoxidase immobilized in calcium alginate/MnO2 composite [Volume 15, Issue 3, 2018, Pages 82-93]
Karimi, Asadollah Ultrasonic Assisted Synthesis and Characterization of xCuO/CeO2–γAl2O3 Nanoatalysts [Volume 13, Issue 3, 2016, Pages 43-53]
Karimi, S. Prediction of polyvinyl alcohol (PVOH) properties synthesized at various conditions by artificial neural networks technique [Volume 14, Issue 2, 2017, Pages 3-16]
Karimian, Azam Optimization of the Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide Based Respiratory Air Tablets Using the Taguchi Method [Volume 18, Issue 4, 2021, Pages 81-98]
Karimian, H. Modification of Montmorillonite and Prediction of Polymer/Clay Affinity Using Surface Properties and Lattice Model [Volume 12, Issue 3, 2015, Pages 41-54]
Karimi-Sabet, J. Effect of graphite oxidation on the yield and quality of graphene synthesized by supercritical exfoliation and its application in photocatalytic degradation of methylene blue [Volume 12, Issue 4, 2015, Pages 52-68]
Kashi, E. Comparison the performance of different reverse osmosis membrane modules by CFD modeling [Volume 16, Issue 1, 2019, Pages 101-116]
Kavoosi, S. Synthesis the Bioactive Conjugates of Nisin-Xanthan through the Maillard Reaction at Moderate Temperature [Volume 20, Issue 1, 2023, Pages 78-91]
Kayani, M. Mathematical simulation of thermal behavior of moving bed reactors [Volume 14, Issue 4, 2017, Pages 48-58]
Kazemi, F. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
Kazemi, Yaser The Impact of Liquid-Liquid Hydrodynamic Focusing on the Efficiency of Heterogeneous Microreactors: Numerical Solution [Volume 21, Issue 1, 2024]
Kazemi-Beydokhti, A. Oxidative desulfurization of petroleum products using decorated cobalt oxide on the surface of modified carbon nanotubes-ICHEC-1887 [Volume 18, Issue 1, 2021, Pages 36-45]
Kazi, M.-K. Design and Fabrication of an Improved Single-Column Chromatographic Separation Process [Volume 15, Issue 4, 2018, Pages 81-92]
Keshavarz Moraveji, Mostafa Three-dimensional CFD modeling of fluid flow and heat transfer characteristics of Al2O3/water nanofluid in microchannel heat sink with Eulerian-Eulerian approach [Volume 13, Issue 4, 2016, Pages 46-61]
Keshavarz Moraveji*, M. Experimental Study and CFD Modeling of the Ohmic Heating Process in a Static Two-Phase Biosolid – Liquid System [Volume 12, Issue 2, 2015, Pages 75-87]
Khadiv-Parsi, P. Preparation and Drug-Delivery Properties of Metal-Organic Framework HKUST-1 [Volume 16, Issue 4, 2019, Pages 73-80]
Khajeh Amiri, M. Experimental, Kinetics and Isotherm Modeling of Carbon Dioxide Adsorption with 13X Zeolite in a fixed bed column [Volume 16, Issue 1, 2019, Pages 54-64]
Khalilipour, M. M Plantwide Control Structure of the Diethyl Oxalate Process Concerning: Safety and Process Improvement [Volume 19, Issue 4, 2022, Pages 52-75]
Khan, M. N. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]
Khani, M.J. Effect of Particle Size of Zinc Powder on the Efficiency of Ni-Cd Cementation in Cold Purification Reactor [Volume 20, Issue 3, 2023, Pages 90-103]
Kharazi, M. Adsorption Behavior of Short Alkyl Chain Imidazolium Ionic Liquidsat N-Butyl Acetate + Water Interface: Experiments and Modeling [Volume 12, Issue 2, 2015, Pages 59-74]
Khebri, V. Design and construction of a helium purification system using cryogenic adsorption process [Volume 15, Issue 1, 2018, Pages 89-101]
Khori Amirabadi, F. Optimizing of Synthesis of High Purity HMX Using Polyphosphoric Acid by Response Surface Method [Volume 20, Issue 2, 2023, Pages 50-61]
Khorshidi, J. Experimental study of hydrodynamic characteristics of improved sieve tray with push valves [Volume 14, Issue 1, 2017, Pages 40-51]
Khoshhal, S. Khoshhal Synthesis of a high characteristics activated carbon from walnut shell for the removal of Cr (VI) and Fe (II) from aqueous solution: single and binary solutes adsorption [Volume 12, Issue 4, 2015, Pages 28-51]
Khoshnam, Farhad Drying Apple Slices in a Rotating-Tray Convective Dryer: A Study on Dehydration Characteristics and Qualitative Attributes [Volume 18, Issue 3, 2021, Pages 16-32]
Khoshrou, Siamak Polysulfone/ Carbon Nanotubes Asymmetric Nanocomposite Membranes: Effect of Nanotubes Surface Modification on Morphology and Water Permeability [Volume 12, Issue 4, 2015, Pages 69-83]
Khosrozadeh, I. Optimization of Semiregenerative Catalytic Naphtha Reforming Unit to Enhance Octane Number and Reformate Yield [Volume 15, Issue 2, 2018, Pages 52-64]
Kian, M. Study of the Industrial Wastewater Treatment by a Membrane Bioreactor (MBR) Case Study: Cookie Factory Wastewater [Volume 17, Issue 3, 2020, Pages 74-84]
Koksal, M. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
Kostic, N.A. DESULFURIZATION AND DEMETALIZATION OF USED ENGINE OIL IN LABORATORY SCALE [Volume 15, Issue 1, 2018, Pages 73-88]
Krstic, S.S. DESULFURIZATION AND DEMETALIZATION OF USED ENGINE OIL IN LABORATORY SCALE [Volume 15, Issue 1, 2018, Pages 73-88]
Krstić, B.V. DESULFURIZATION AND DEMETALIZATION OF USED ENGINE OIL IN LABORATORY SCALE [Volume 15, Issue 1, 2018, Pages 73-88]
Kulah, G. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]

L

Leon, Florin Liquid-liquid equilibrium data prediction using large margin nearest neighbor [Volume 13, Issue 4, 2016, Pages 14-32]
Lisa, Catalin EXPERIMENTAL STUDIES OF SURFACE TENSIONS AND MODELING WITH NEURAL NETWORKS [Volume 21, Issue 1, 2024]
Lisa, Gabriela EXPERIMENTAL STUDIES OF SURFACE TENSIONS AND MODELING WITH NEURAL NETWORKS [Volume 21, Issue 1, 2024]

M

Mahmoodi, L. Mathematical simulation of thermal behavior of moving bed reactors [Volume 14, Issue 4, 2017, Pages 48-58]
Mahmoudian, M. Prediction of Red Mud Bound-Soda Losses in Bayer Process Using Neural Networks [Volume 13, Issue 2, 2016, Pages 46-56]
Mahmoudizadeh, M. Methanol Steam Reforming Catalyzing over Cu/Zn/Fe Mixed Oxide Catalysts [Volume 14, Issue 1, 2017, Pages 26-39]
Mahyari, M. Optimizing of Synthesis of High Purity HMX Using Polyphosphoric Acid by Response Surface Method [Volume 20, Issue 2, 2023, Pages 50-61]
Mandooie, Masoud A density functional theory (DFT) investigation on the impact of the linker length in zinc oxide-based metal-organic-frameworks for hydrogen adsorption [Volume 21, Issue 1, 2024]
Mardani, R. Effect of the Carbon Source Flow Rate on the Quality of the Growth of Super-Aligned Carbon Nanotube Arrays by the Chemical Vapor Deposition Method [Volume 20, Issue 3, 2023, Pages 45-53]
Mashhadimoslem, Hossein Evaluation of the Silica Gel Adsorbent Potential for Carbon Dioxide Capture: Experimental and Modeling [Volume 18, Issue 4, 2021, Pages 64-80]
Masoumi, M.E. Experimental and Kinetic Study of CO Oxidation Over LaFe1-xCuxO3 (x=0, 0.2, 0.4, 0.6) Perovskite-Type Oxides [Volume 15, Issue 2, 2018, Pages 91-102]
Masoumi, Sh. Characterization and optimization of SAPO-34 catalysts synthesized by mixed templates in MTO reaction [Volume 12, Issue 4, 2015, Pages 4-14]
Medi, B. Design and Fabrication of an Improved Single-Column Chromatographic Separation Process [Volume 15, Issue 4, 2018, Pages 81-92]
Mehdizadeh, A. Experimental Investigation on the Solubility and Initial Rate of Absorption of CO2 in Mixture of Amine-Functionalized Ionic Liquids and Physical Solvents [Volume 12, Issue 1, 2015, Pages 68-77]
Mehmandoust, Sh. Modification of Montmorillonite and Prediction of Polymer/Clay Affinity Using Surface Properties and Lattice Model [Volume 12, Issue 3, 2015, Pages 41-54]
Mehralizadeh, A. Studying the Influence of the Mixing Speed of the Polymer Blend of General-Purpose Polystyrene and Acrylonitrile-Butadiene Styrene with the Applications of Artificial Neural Networks [Volume 17, Issue 4, 2020, Pages 21-32]
Milosavljevic, B.L. DESULFURIZATION AND DEMETALIZATION OF USED ENGINE OIL IN LABORATORY SCALE [Volume 15, Issue 1, 2018, Pages 73-88]
Milosavljevic, M.M. DESULFURIZATION AND DEMETALIZATION OF USED ENGINE OIL IN LABORATORY SCALE [Volume 15, Issue 1, 2018, Pages 73-88]
Milosevic, D.L. DESULFURIZATION AND DEMETALIZATION OF USED ENGINE OIL IN LABORATORY SCALE [Volume 15, Issue 1, 2018, Pages 73-88]
Mirahmad, A. A Comprehensive Study on a Latent Heat Thermal Energy Storage System and its Feasible Applications in Greenhouses [Volume 13, Issue 2, 2016, Pages 33-45]
Mirfendereski, S. M. Synthesis of zeolite NaA nano-crystalls; effect of synthesis parameters on crystallinity and crystal size [Volume 16, Issue 1, 2019, Pages 22-38]
Mirhoseini renani, N. Effect of Electrohydrodynamic (EHD) on the Drying Rate of Polymer Films Based on the Heat and Mass Transfer [Volume 17, Issue 3, 2020, Pages 41-52]
Moaf, M. Investigating the Impact of Air Injection on the Thermal Performance of Helical Tube with Varying Helix Diameters: Downward Flow [Volume 19, Issue 2, 2022, Pages 38-50]
Moghadasi, M. Improving the performance of a two-phase ejector using genetic algorithm based on secondary fluid entrainment rate [Volume 19, Issue 4, 2022, Pages 95-109]
Moghaddas, J. Study on the Effect of Humidity on Electrical Properties of Copper-Silica Aerogel [Volume 12, Issue 2, 2015, Pages 3-12]
Moghaddas, J. Study on diffusion coefficient of benzene and ethyl benzene vapours in nanoporous silica aerogel and silica aerogel-activated carbon composites [Volume 16, Issue 1, 2019, Pages 1-21]
Moghaddas, J. Experimental and Computational Study on Hydrodynamic of a Downscaled Mini Vessel USP Dissolution Test Apparatus II [Volume 16, Issue 3, 2019, Pages 3-22]
Moghaddas, Jafarsadegh Optimization of Candida rugosa lipase immobilization parameters on magnetic silica aerogel using adsorption method [Volume 13, Issue 3, 2016, Pages 19-31]
Moghaddas, J.S Investigation of Bubble Characteristics by Photographic Method [Volume 19, Issue 3, 2022, Pages 69-80]
Moghaddas, J.S. Synthesis and Characterization of Waterglass-Based Silica Aerogel Under Heat Treatment for Adsorption of Nitrate from Water: Batch and Column Studies [Volume 16, Issue 4, 2019, Pages 53-72]
Moghbeli, Mohammad Reza Polysulfone/ Carbon Nanotubes Asymmetric Nanocomposite Membranes: Effect of Nanotubes Surface Modification on Morphology and Water Permeability [Volume 12, Issue 4, 2015, Pages 69-83]
Moghbeli, M.R. Effect of silica particles on adhesion strength of polyvinyl chloride coatings on metal substrates [Volume 14, Issue 2, 2017, Pages 74-82]
Moghbeli1*, M. R. Modification of Montmorillonite and Prediction of Polymer/Clay Affinity Using Surface Properties and Lattice Model [Volume 12, Issue 3, 2015, Pages 41-54]
Mohamady, R. Dynamic Behavior of an Oil Droplet Adhered to the Wall Surface in a Channel Flow by the Lattice Boltzmann Method [Volume 15, Issue 1, 2018, Pages 35-48]
Mohammadi, A. Study on diffusion coefficient of benzene and ethyl benzene vapours in nanoporous silica aerogel and silica aerogel-activated carbon composites [Volume 16, Issue 1, 2019, Pages 1-21]
Mohammadi, A. Experimental and Computational Study on Hydrodynamic of a Downscaled Mini Vessel USP Dissolution Test Apparatus II [Volume 16, Issue 3, 2019, Pages 3-22]
Mohammadi, A. Conceptual Design of a Batch Process for the Production of Biodiesel from High Free Fatty Acid Feedstocks [Volume 19, Issue 1, 2022, Pages 15-32]
Mohammadi, Abbas Techno-Economic Optimization of a Continuous Process for the Biodiesel Production from Waste Vegetable Oils [Volume 18, Issue 4, 2021, Pages 20-35]
Mohammadi, F. Investigation of Liquid–Liquid Two-Phase Flow Pattern in Microreactors for Biodiesel Production [Volume 12, Issue 3, 2015, Pages 32-40]
Mohammadi, F. Biodiesel production from soybean oil using ionic liquid as a catalyst in a microreactor [Volume 15, Issue 1, 2018, Pages 102-114]
Mohammadi Doust, A. An optimization study by response surface methodology (RSM) on viscosity reduction of residue fuel oil exposed ultrasonic waves and solvent injection [Volume 13, Issue 1, 2016, Pages 3-19]
Mohammadnezami, H. CFD Simulation of Methane Steam Micro-Reformer: Channel Design and Inlet/Outlet Configuration [Volume 16, Issue 4, 2019, Pages 23-35]
Mohebbi, V. Kinetics of Propane Hydrate Formation in Agitated Reactor: A Mass Transfer Approach [Volume 14, Issue 2, 2017, Pages 48-58]
Mokhtarani, B. Effect of electrokinetic on biodegradation of fluorene and phenanthrene in soil [Volume 13, Issue 2, 2016, Pages 71-79]
Momenpoor, B. Assessing Nanostarch-Nanoclay Composite Film as a Potentially Durable Environmental-Friendly Packaging Material [Volume 20, Issue 3, 2023, Pages 3-20]
Moosavi, H. The Effect of the Method of Adding Impregnation Solutions on the Properties and Performance of the Pd-Ag/Al2O3 Catalyst in the Tail-End Acetylene Selective Hydrogenation. [Volume 18, Issue 2, 2021, Pages 19-30]
Moosavian, M.A. Removal of Cerium from Aqueous Solutions by Amino Phosphate Modified Nano TiO2: Kinetic, and Equilibrium Studies [Volume 13, Issue 2, 2016, Pages 3-21]
Moosavian, S. M. A. Effect of graphite oxidation on the yield and quality of graphene synthesized by supercritical exfoliation and its application in photocatalytic degradation of methylene blue [Volume 12, Issue 4, 2015, Pages 52-68]
Moosavian, S. M. A. Stochastic Comparisons of Probability Distribution Functions with Experimental Data in a Liquid-Liquid Extraction Column for Determination of Drop Size Distributions [Volume 14, Issue 3, 2017, Pages 82-95]
Moradi, Gh. Theoretical and Empirical Equilibrium Concentration for the Dry Reforming of Methane [Volume 18, Issue 2, 2021, Pages 31-47]
Moradi, Gh. Predicting Kinematic Viscosity and Cetane Number of Diesel- Biodiesel Blend Using Neural Network and Empirical Models [Volume 19, Issue 3, 2022, Pages 81-94]
Moradi, Gholamreza Investigating the Activity of the Supported Bimetallic Ni-Co Catalysts on the Dry Reforming of Methane [Volume 18, Issue 3, 2021, Pages 63-73]
Moradi, H. Preparation and Drug-Delivery Properties of Metal-Organic Framework HKUST-1 [Volume 16, Issue 4, 2019, Pages 73-80]
Moradkhani, H. Application of artificial neural network in deoxygenation of water by glucoseoxidase immobilized in calcium alginate/MnO2 composite [Volume 15, Issue 3, 2018, Pages 82-93]
Moraveji, M. Fabrication and Characterization of Polysulfone-Graphene Oxide Mixed Matrix Membranes for the Natural Gas Treatment [Volume 19, Issue 2, 2022, Pages 21-37]
Moraveji, M. Improving the performance of a two-phase ejector using genetic algorithm based on secondary fluid entrainment rate [Volume 19, Issue 4, 2022, Pages 95-109]
Moraveji, M. Synthesize and application of Fe3O4/MW-CNT Composite in photo-catalyst-assisted electrochemical oxidation of BTX compounds from wastewater [Volume 20, Issue 1, 2023, Pages 54-66]
Moraveji, Mostafa Optimization of the Adsorption of Pb(II) and Zn(II) onto the EDTA-Modified MnO2/Chitosan/Fe3O4 Nanocomposite from an Aqueous Solution Using RSM According to the CCD Method [Volume 18, Issue 3, 2021, Pages 33-51]
Morovat, M. Investigation. effect. of mixed. matrix. membranes’. structural. parameters. on their. effective. gaseous. penetrant. diffusion. ratio using. CFD tools [Volume 19, Issue 4, 2022, Pages 3-19]
Mortaheb, H.R. Effect of electrokinetic on biodegradation of fluorene and phenanthrene in soil [Volume 13, Issue 2, 2016, Pages 71-79]
Mortezaeikia, V. CO2 biofixation by Dunaliella Salina in batch and semi-continuous cultivations, using hydrophobic and hydrophilic poly ethylene (PE) hollow fiber membrane photobioreactors [Volume 13, Issue 1, 2016, Pages 47-59]
Mostafazadeh, N. Optimization of solvothermally synthesized ZIF-67 metal organic framework and its application for Cr(VI) adsorption from aqueous solution [Volume 15, Issue 4, 2018, Pages 27-47]
Mostoufi, N. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
Mostoufi, N. Effect of Isopropanol on the Fluidization of Hydrophilic Titanium Nano-Powder [Volume 19, Issue 2, 2022, Pages 51-67]
Motevassel, M. Metal-Organic Frameworks in Systems of Drug Delivery: Review [Volume 20, Issue 1, 2023, Pages 36-50]
Mousavi, S.A. Prediction of the Effect of Polymer Membrane Composition in a Dry Air Humidification Process via Neural Network Modeling [Volume 13, Issue 1, 2016, Pages 73-83]
Mousavi, S.E Catalytic reduction of SO2 with CH4 to elemental sulfur: A comparative analysis of alumina, copper-alumina and nickel-alumina catalysts [Volume 15, Issue 3, 2018, Pages 94-107]
Mousavi, Seyed Hamed Stochastic Comparisons of Probability Distribution Functions with Experimental Data in a Liquid-Liquid Extraction Column for Determination of Drop Size Distributions [Volume 14, Issue 3, 2017, Pages 82-95]
Mousavi, S. M. Assessment of Bioavailability of Crude Oil in Three Different Agricultural Soils [Volume 12, Issue 1, 2015, Pages 3-12]
Movagharnejad*, K. Experimental Study and Mathematical Modeling of the Osmotic Drying Process [Volume 12, Issue 3, 2015, Pages 15-32]
Movahedirad, S. Bubble formation on a single orifice in a gas solid fluidized bed using digital image analysis [Volume 13, Issue 1, 2016, Pages 60-72]
Movahedirad, Salman Mixing of the Immiscible Liquids in the Entrance Region of a T-Type Chamber Using Laser Induced Fluorescence (LIF) Method [Volume 13, Issue 3, 2016, Pages 32-42]
Mozafari, M. Demuification of Water-in-Oil Emulsions by Means of Dielectrophoresis [Volume 17, Issue 3, 2020, Pages 24-40]
Mozaffari, A. Catalytic reduction of SO2 with CH4 to elemental sulfur: A comparative analysis of alumina, copper-alumina and nickel-alumina catalysts [Volume 15, Issue 3, 2018, Pages 94-107]

N

Nafasi, Hayede Assessing the Impact of Hydraulic Retention Time and Sawdust on the Elimination of Pb and Co from Oily Wastewater via Vertical-Flow Constructed Wetlands (VFCWs) with Phragmites Australis Cultivation. [Volume 21, Issue 1, 2024]
Namjoo, A. Assessing Nanostarch-Nanoclay Composite Film as a Potentially Durable Environmental-Friendly Packaging Material [Volume 20, Issue 3, 2023, Pages 3-20]
Naser Ahmadi, A. Experimental Investigation on the Solubility and Initial Rate of Absorption of CO2 in Mixture of Amine-Functionalized Ionic Liquids and Physical Solvents [Volume 12, Issue 1, 2015, Pages 68-77]
Nasr Esfahany, M. Adsorption and Desorption Process of Chromium Ions Using Magnetic Iron Oxide Nanoparticles and Its Relevant Mechanism [Volume 14, Issue 3, 2017, Pages 31-40]
Navarchian, A.H Response Surface Methodology for Investigating the Effects of Hydrolysis Reaction Parameters on Molecular Structure and Performance of Polyvinyl Alcohol as Primary Suspending Agent [Volume 14, Issue 1, 2017, Pages 52-66]
Nazari, M. Prediction of polyvinyl alcohol (PVOH) properties synthesized at various conditions by artificial neural networks technique [Volume 14, Issue 2, 2017, Pages 3-16]
Nazari, M. Synthesis, Characterization and Analysis of Thermal Properties and burning rate of Zr/BaCrO4 mixture [Volume 20, Issue 2, 2023, Pages 3-14]
Negm, A. Cyclic Voltammetry of Cobalt Chloride with L- Carrageenan (LK) Using Glassy Carbon Electrode [Volume 14, Issue 4, 2017, Pages 90-99]
Nejad, Gh. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]
Niaei, A. Catalytic oxidation of toluene over LaBO3 (B= Fe, Mn and Co) and LaCo0.7B′0.3O3 (B′= Fe and Mn) perovskite-type [Volume 14, Issue 1, 2017, Pages 67-73]
Niaei, A. CFD modeling for selective formation of propylene from methanol over synthesized Mn-substituted MFI metallosilicate catalyst [Volume 15, Issue 2, 2018, Pages 22-37]
Niaei, A. Experimental and Kinetic Study of CO Oxidation Over LaFe1-xCuxO3 (x=0, 0.2, 0.4, 0.6) Perovskite-Type Oxides [Volume 15, Issue 2, 2018, Pages 91-102]
Niazi, M. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering [Volume 18, Issue 1, 2021, Pages 3-15]
Nikpour, M. Lipase Immobilized into Novel GPTMS: TMOS Derived Sol-Gels and Its Application for Biodiesel Production from Waste Oil [Volume 13, Issue 1, 2016, Pages 32-46]
Nikravesh, Golara A density functional theory (DFT) investigation on the impact of the linker length in zinc oxide-based metal-organic-frameworks for hydrogen adsorption [Volume 21, Issue 1, 2024]
Nikzad, M. Extraction of pectin from sour orange and its application as the adsorbent for removal of nickel from aqueous solution: Kinetic and equilibrium study [Volume 15, Issue 2, 2018, Pages 3-21]
NoieBaghban, S. H. Thermal Conductivity of Water Based Nanofluids Containing Decorated Multi Walled Carbon Nanotubes with Different Amount of TiO2 Nanoparticles [Volume 12, Issue 1, 2015, Pages 30-40]
Norouzi, Mahdi Optimization of the Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide Based Respiratory Air Tablets Using the Taguchi Method [Volume 18, Issue 4, 2021, Pages 81-98]
Nosrati, M. Optimization of factors affecting on sulfide oxidation from synthetic spent caustic by Haloalkaliphilic Thioalkalivibrio versutus by focus on sodium ion effect: Application of response surface methodology [Volume 14, Issue 1, 2017, Pages 74-87]
Nourouzpour, M. M. Optimization of cultivation conditions of Candida catenulata in synthesizing acidic sophorolipid [Volume 20, Issue 3, 2023, Pages 54-69]

O

Omidi, I. A Numerical Simulation Model of Solid Acid Fuel Cell Performance by CsH2PO4 Electrolyte [Volume 14, Issue 2, 2017, Pages 17-32]
Omidi, R. Synthesis, Characterization and Analysis of Thermal Properties and burning rate of Zr/BaCrO4 mixture [Volume 20, Issue 2, 2023, Pages 3-14]
Omidifar, M Optimization of Hydrogen Distribution Network by Imperialist Competitive AlgorithmIn [Volume 13, Issue 3, 2016, Pages 63-77]
Omidkhah, Mohammadreza Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]
Omidkhah, M.R Biofouling Behavior on Forward Osmosis Using Vertically Aligned CNT Membrane on Alumina [Volume 16, Issue 2, 2019, Pages 1-13]
Omidvar Langroudi, Leila An investigation of heat and mass transfer enhancement of air dehumidification with addition of γ-Al2O3 nano-particles to liquid desiccant [Volume 13, Issue 4, 2016, Pages 96-112]
Oudi, A. H. Investigation of the effect of DamKohler and Stanton non-dimensional numbers on the stability of continuous stirred tank reactors [Volume 18, Issue 2, 2021, Pages 48-58]
Oudi, A. H. Screening of important factors affecting the process of ammonia synthesis by Plackett-Burman method and process optimization with RSMScreening the Important Factors Affecting the Process of Ammonia Synthesized by the Plackett-Burman Method and the Process Optimization with RSM [Volume 19, Issue 2, 2022, Pages 3-20]
Oudi, A.H Simulation and investigation of thermodynamics and energy of methanol purification unit [Volume 19, Issue 3, 2022, Pages 95-107]
Oudi, A.H. Optimization of the homogeneous rhodium-catalyzed methanol carbonylation reactor to reduce CO2 emissions [Volume 19, Issue 3, 2022, Pages 50-68]
Ovaysi, S. Developing a Mathematical Model to Predict the Behavior of a Supersonic Superheated Steam Flow inside a Laval Nozzle [Volume 17, Issue 2, 2020, Pages 56-69]
Ovaysi, S. Synthesis, Characterization and Analysis of Thermal Properties and burning rate of Zr/BaCrO4 mixture [Volume 20, Issue 2, 2023, Pages 3-14]
Ovaysi, Saeed CFD Modeling and Industrial Evaluation of a Cyclone Cascade for the Production of the HDPE Catalyst [Volume 18, Issue 3, 2021, Pages 74-85]
Ozairy, R. Developing genetic algorithm-based neural networks and sensitivity analysis for thermal conductivity of natural gases [Volume 17, Issue 2, 2020, Pages 44-55]

P

Pahlavanzadeh, H. Catalytic reduction of SO2 with CH4 to elemental sulfur: A comparative analysis of alumina, copper-alumina and nickel-alumina catalysts [Volume 15, Issue 3, 2018, Pages 94-107]
Panadare, D. C. Applications of Waste Cooking Oil Other Than Biodiesel: A Review [Volume 12, Issue 3, 2015, Pages 55-76]
Panahadeh, Adel Optimization of the Adsorption of Pb(II) and Zn(II) onto the EDTA-Modified MnO2/Chitosan/Fe3O4 Nanocomposite from an Aqueous Solution Using RSM According to the CCD Method [Volume 18, Issue 3, 2021, Pages 33-51]
Pandey, J. Kinetic, mechanistic and thermodynamic investigations on Iridium (III) catalyzed oxidation of D-Mannitol by N-chloro-p-toluenesulfonamide in perchloric acid medium [Volume 14, Issue 4, 2017, Pages 77-89]
Parvareh, A. Experimental and CFD Study of the Tube Configuration Effect on the Shell-Side Thermal Performance in a Shell and Helically Coiled Tube Heat Exchanger [Volume 12, Issue 2, 2015, Pages 13-25]
Parvareh, A. investigation of mercaptan removal from Kerosene using passive mixing tools: Experimental study and CFD modeling [Volume 14, Issue 3, 2017, Pages 55-64]
Parvareh, A. Biodiesel production from soybean oil using ionic liquid as a catalyst in a microreactor [Volume 15, Issue 1, 2018, Pages 102-114]
Parvareh, A. Fabrication and Characterization of Polysulfone-Graphene Oxide Mixed Matrix Membranes for the Natural Gas Treatment [Volume 19, Issue 2, 2022, Pages 21-37]
Parvareh, A. Synthesize and application of Fe3O4/MW-CNT Composite in photo-catalyst-assisted electrochemical oxidation of BTX compounds from wastewater [Volume 20, Issue 1, 2023, Pages 54-66]
Parvareh, A. Prediction of erosion rate in gas-solid flow using computational fluid dynamics (CFD): focus on geometrical parameters [Volume 20, Issue 2, 2023, Pages 33-49]
Parvareh, Arsalan Optimization of the Adsorption of Pb(II) and Zn(II) onto the EDTA-Modified MnO2/Chitosan/Fe3O4 Nanocomposite from an Aqueous Solution Using RSM According to the CCD Method [Volume 18, Issue 3, 2021, Pages 33-51]
Parvizi, . investigation of mercaptan removal from Kerosene using passive mixing tools: Experimental study and CFD modeling [Volume 14, Issue 3, 2017, Pages 55-64]
Parvizsedghy, R. Production of Bio-Gasoline with High Octane Number, as a Renewable Transportation Biofuel, via Thermochemical Conversion of Castor Oil [Volume 17, Issue 3, 2020, Pages 3-23]
Pashai, E. Observations of Sludge Formation in Group I Base Stock for Lubricants and Thermodynamic Modeling with the SAFT Equation of State [Volume 14, Issue 2, 2017, Pages 33-47]
Patel, R. Kinetic, mechanistic and thermodynamic investigations on Iridium (III) catalyzed oxidation of D-Mannitol by N-chloro-p-toluenesulfonamide in perchloric acid medium [Volume 14, Issue 4, 2017, Pages 77-89]
Payan, A. Enhancing Photocatalytic Activity of Nitrogen Doped TiO2 for Degradation of 4-Chlorophenol under Solar Light Irradiation [Volume 15, Issue 3, 2018, Pages 3-14]
Pazouki, M. Biological Conversion of Normal Chain Octadecane by Native Microbial Consortia [Volume 12, Issue 2, 2015, Pages 50-58]
Pazouki, M. Lipase Immobilized into Novel GPTMS: TMOS Derived Sol-Gels and Its Application for Biodiesel Production from Waste Oil [Volume 13, Issue 1, 2016, Pages 32-46]
Pazouki, Mohammad Kinetics investigation of cell growth, xanthan production and sugar cane molasses consumption by Xanthomonas campestris [Volume 12, Issue 4, 2015, Pages 84-92]
Pecic, L.S. DESULFURIZATION AND DEMETALIZATION OF USED ENGINE OIL IN LABORATORY SCALE [Volume 15, Issue 1, 2018, Pages 73-88]
Peighambardoust, Seyed Jamaleddin Preparation of Flame Retardant Polystyrene via In-Situ Bulk Polymerization Method and Evaluation of its Flammability Properties [Volume 13, Issue 4, 2016, Pages 62-70]
Peighambardoust, S.J. Methanol crossover and selectivity of nafion/heteropolyacid/montmorillonite nanocomposite proton exchange membranes for DMFC applications [Volume 14, Issue 3, 2017, Pages 65-81]
Piryaee, M. Optimizing of Synthesis of High Purity HMX Using Polyphosphoric Acid by Response Surface Method [Volume 20, Issue 2, 2023, Pages 50-61]
Pirzadeh, K. Optimization of solvothermally synthesized ZIF-67 metal organic framework and its application for Cr(VI) adsorption from aqueous solution [Volume 15, Issue 4, 2018, Pages 27-47]
Poorabdollah, M. Modified and unmodified Graphite/unsaturated polyester resin composites: thermal and mechanical behavior [Volume 17, Issue 2, 2020, Pages 14-33]
Pourshayan, A. Ebrahim Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]
Prakash, B. Development and Evaluation of the Magnesium Potassium Phosphate Cement Based Refractory [Volume 17, Issue 4, 2020, Pages 69-78]

R

Rabbani, A. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]
Rabbani, Y. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]
Rabbani,, Y. An Investigation of the Effects of Dopamine on the Superhydrophobicity of Carbonyl Iron Particles with Stearic Acid [Volume 17, Issue 4, 2020, Pages 49-59]
Raeisi, M. Groundwater Denitrification by Using MBBR With KMT Packing [Volume 17, Issue 4, 2020, Pages 60-68]
Rafie Lak, A. Designing a glycemic control strategy to maintain glucose homeostasis and prevent hypoglycemia for subjects with type 1 diabetes [Volume 15, Issue 3, 2018, Pages 34-52]
Rahbari-sisakht, M. Reverse osmosis desalination using thin film composite polysulfone-zinc oxide mixed matrix membrane [Volume 20, Issue 1, 2023, Pages 67-77]
Rahimi, M. Experimental and CFD Study of the Tube Configuration Effect on the Shell-Side Thermal Performance in a Shell and Helically Coiled Tube Heat Exchanger [Volume 12, Issue 2, 2015, Pages 13-25]
Rahimi, M. Investigation of Liquid–Liquid Two-Phase Flow Pattern in Microreactors for Biodiesel Production [Volume 12, Issue 3, 2015, Pages 32-40]
Rahimi, M. An optimization study by response surface methodology (RSM) on viscosity reduction of residue fuel oil exposed ultrasonic waves and solvent injection [Volume 13, Issue 1, 2016, Pages 3-19]
Rahimi, M. Ultrasound-Assisted Biodiesel Production in microreactors [Volume 13, Issue 2, 2016, Pages 22-32]
Rahimi, M. Waste water ammonia stripping intensification using microfluidic system [Volume 14, Issue 4, 2017, Pages 17-31]
Rahimi, M. Biodiesel production from soybean oil using ionic liquid as a catalyst in a microreactor [Volume 15, Issue 1, 2018, Pages 102-114]
Rahimi, M. Microfluidic extraction of tannic acid from Quercus leaves [Volume 15, Issue 3, 2018, Pages 15-33]
Rahimi, M. Propionic acid extraction in a microfluidic system: simultaneous effects of channel diameter and fluid flow rate on the flow regime and mass transfer [Volume 15, Issue 4, 2018, Pages 48-62]
Rahimi, M. Increasing flow capacity and reducing drag in microtubes using drag-reducing polymer [Volume 17, Issue 2, 2020, Pages 70-87]
Rahimi, M. Developing a Mathematical Model to Predict the Behavior of a Supersonic Superheated Steam Flow inside a Laval Nozzle [Volume 17, Issue 2, 2020, Pages 56-69]
Rahimi, M. Cooling Enhancement of a Photovoltaic Panel Through Ferrofluid Stimulation Using a Magnetic-Wind Turbine [Volume 16, Issue 4, 2019, Pages 35-52]
Rahimi, M. Application of the Adaptive Neuro-Fuzzy Inference System (ANFIS) and Sobol Approaches for Modeling and Sensitivity Analysis of the Biosorption of Triglyceride from the Blood Serum [Volume 19, Issue 1, 2022, Pages 51-65]
Rahimi, R. Modeling and Simulation of a Divided Wall Column for 1,3 Butadiene Purification [Volume 12, Issue 1, 2015, Pages 60-67]
Rahimi, Rahbar Simulation, Control and Experimental Analysis of 1,3Butadiene Purification Unit [Volume 13, Issue 4, 2016, Pages 33-45]
Rahimi-Ahar, Z. Theoretical study of multi-stage and multi-feeding variable pressure humidification-dehumidification (VP-HD) desalination systems [Volume 21, Issue 1, 2024]
Rahimi Fard, M. The Effect of the Method of Adding Impregnation Solutions on the Properties and Performance of the Pd-Ag/Al2O3 Catalyst in the Tail-End Acetylene Selective Hydrogenation. [Volume 18, Issue 2, 2021, Pages 19-30]
Rahimpour, Farshad Liquid-liquid equilibrium data prediction using large margin nearest neighbor [Volume 13, Issue 4, 2016, Pages 14-32]
Rahimpour, Mohammad Reza Simultaneous high hydrogen content-synthesis gas production and in-situ CO2 removal via sorption-enhanced reaction process: modeling, sensitivity analysis and multi-objective optimization using NSGA-II algorithm [Volume 13, Issue 4, 2016, Pages 71-95]
Rahimpour, M.R. Enhancement of Hydrogen and Methanol Production using a Double Fluidized-bed Two Membranes Reactor [Volume 13, Issue 3, 2016, Pages 3-18]
Rahman, M. M. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]
Rahmanian, M. Modeling and Simulation of a Divided Wall Column for 1,3 Butadiene Purification [Volume 12, Issue 1, 2015, Pages 60-67]
Rahmanzadeh derisi, M. Effect of Solvent on the Optimal Thermodynamic Conditions of Ternary System (CO2, Alcohol, Ampicillin) in GAS Process [Volume 17, Issue 1, 2020, Pages 37-46]
Rahmanzadeh Derisi, M. Determining the Optimal Thermodynamic Conditions of Ternary Systems Containing (CO2, Solvent, 5-Fluorouracil) in the GAS Process [Volume 19, Issue 1, 2022, Pages 3-14]
Rajabi, L. Modified and unmodified Graphite/unsaturated polyester resin composites: thermal and mechanical behavior [Volume 17, Issue 2, 2020, Pages 14-33]
Rajendran, V. Phase-transfer catalysis for synthesis of ethyl 2-(4-nitrophenoxy)acetate under sonication- kinetic aspects [Volume 13, Issue 2, 2016, Pages 80-87]
Rajendran, Venugopal Synthesis of 1-(isopentyloxy)-4-nitrobenzene under ultrasound assisted liquid-liquid phase-transfer catalysis [Volume 13, Issue 3, 2016, Pages 54-62]
Ramakrishna, S. Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]
Ramazani, A. A review on the effects of fillers on gas separation Mixed Matrix Membranes [Volume 19, Issue 3, 2022, Pages 3-28]
Ranjbara, A. Effect of MgAl2O4 catalyst support synthesis method on the catalytic activity of nickel Nano catalyst in reverse water gas shift reaction [Volume 16, Issue 3, 2019, Pages 58-69]
Rashidi Zonouz, P. Experimental and Kinetic Study of CO Oxidation Over LaFe1-xCuxO3 (x=0, 0.2, 0.4, 0.6) Perovskite-Type Oxides [Volume 15, Issue 2, 2018, Pages 91-102]
Rathod*, V. K. Applications of Waste Cooking Oil Other Than Biodiesel: A Review [Volume 12, Issue 3, 2015, Pages 55-76]
Razzaghi, M. Application of artificial neural network in deoxygenation of water by glucoseoxidase immobilized in calcium alginate/MnO2 composite [Volume 15, Issue 3, 2018, Pages 82-93]
Rezaei, H. Developing a Mathematical Model to Predict the Behavior of a Supersonic Superheated Steam Flow inside a Laval Nozzle [Volume 17, Issue 2, 2020, Pages 56-69]
Rezaei, M. Synthesis, Characterization and Analysis of Thermal Properties and burning rate of Zr/BaCrO4 mixture [Volume 20, Issue 2, 2023, Pages 3-14]
Rezaei, R. Prediction of the Effect of Polymer Membrane Composition in a Dry Air Humidification Process via Neural Network Modeling [Volume 13, Issue 1, 2016, Pages 73-83]
Rezvan Leylan, Seyyed Alireza Optimization of the Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide Based Respiratory Air Tablets Using the Taguchi Method [Volume 18, Issue 4, 2021, Pages 81-98]
Rimu, S.H. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]
Roosta, A.A. Optimization of Semiregenerative Catalytic Naphtha Reforming Unit to Enhance Octane Number and Reformate Yield [Volume 15, Issue 2, 2018, Pages 52-64]
Roozbehani, B. Enhancing Photocatalytic Activity of Nitrogen Doped TiO2 for Degradation of 4-Chlorophenol under Solar Light Irradiation [Volume 15, Issue 3, 2018, Pages 3-14]
Roshdi, S. Screening and Optimization of Gas Sweetening Process Parameters with MDEA-PZ Solvent using Plackett-Burman Approach [Volume 20, Issue 3, 2023, Pages 70-89]
Rostami, Kh. Comparison the performance of different reverse osmosis membrane modules by CFD modeling [Volume 16, Issue 1, 2019, Pages 101-116]
Roufegarinejad, L. A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]

S

Saadatmand, M. Developing Collagen Hydrogel Including Bioactive Glass Nanoparticles for being used in Bone Tissue Engineering [Volume 20, Issue 4, 2024, Pages 3-12]
Saberimoghaddam, A. Parasitic Effect of Tube Wall Longitudinal Heat Conduction on Cryogenic Gas Temperature [Volume 14, Issue 1, 2017, Pages 15-25]
Saberimoghaddam, A. Transient thermal study of recuperative tube in tube heat exchanger operating in refrigeration system using experimental test and mathematical simulation [Volume 14, Issue 3, 2017, Pages 3-18]
Saberimoghaddam, A. Design and construction of a helium purification system using cryogenic adsorption process [Volume 15, Issue 1, 2018, Pages 89-101]
Sadeghi, J. Plantwide Control Structure of the Diethyl Oxalate Process Concerning: Safety and Process Improvement [Volume 19, Issue 4, 2022, Pages 52-75]
Sadeghi, Morteza Relationship between the Microstructure and Gas Transport Properties of Polyurethane/Polycaprolactone Blends [Volume 13, Issue 3, 2016, Pages 78-88]
Sadeghi, M.T. Bubble formation on a single orifice in a gas solid fluidized bed using digital image analysis [Volume 13, Issue 1, 2016, Pages 60-72]
Sadeghi, N. Modification of Mixed Matrix Membranes' Famous Permeability Prediction Models by Considering the Formed Voids Around Nonporous Fillers [Volume 17, Issue 3, 2020, Pages 53-73]
Sadrameli, S. M. Production of Bio-Gasoline with High Octane Number, as a Renewable Transportation Biofuel, via Thermochemical Conversion of Castor Oil [Volume 17, Issue 3, 2020, Pages 3-23]
Sadrameli, S.M. A Comprehensive Study on a Latent Heat Thermal Energy Storage System and its Feasible Applications in Greenhouses [Volume 13, Issue 2, 2016, Pages 33-45]
Sadri, A.R. Application and Comparison of MAF-66 with AC and CMS in Vacuum Swing Adsorption Process for CO2 Capture from Flue Gas [Volume 20, Issue 4, 2024, Pages 56-72]
Sadri, H. R. Effect of operating conditions on divinylbenzene production in diethyl benzene dehydrogenation reactor [Volume 15, Issue 4, 2018, Pages 93-104]
Sadri, H. R. Reactor modeling and kinetic parameters estimation for diethylbenzene (DEB) dehydrogenation reactions [Volume 16, Issue 3, 2019, Pages 23-36]
Saeedi, M. Induced tissue cell death by magnetic nanoparticle hyperthermia for cancer treatment: an in silico study [Volume 14, Issue 4, 2017, Pages 59-79]
Safajou Jahankhanemlou, M. The Influences of the Nanoparticles Related Parameters on the Tensile Strength of Polymer Nanocomposites [Volume 17, Issue 1, 2020, Pages 65-78]
Saffar, F. Predicting the coefficients of the Daubert and Danner correlation using a neural network model [Volume 15, Issue 2, 2018, Pages 78-90]
Sahebdelfar, S. The Effect of the Method of Adding Impregnation Solutions on the Properties and Performance of the Pd-Ag/Al2O3 Catalyst in the Tail-End Acetylene Selective Hydrogenation. [Volume 18, Issue 2, 2021, Pages 19-30]
Saien, J. Adsorption Behavior of Short Alkyl Chain Imidazolium Ionic Liquidsat N-Butyl Acetate + Water Interface: Experiments and Modeling [Volume 12, Issue 2, 2015, Pages 59-74]
Salam, K. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]
Salari, D. Catalytic oxidation of toluene over LaBO3 (B= Fe, Mn and Co) and LaCo0.7B′0.3O3 (B′= Fe and Mn) perovskite-type [Volume 14, Issue 1, 2017, Pages 67-73]
Salawudeen, T. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]
Salehi, E. Application of the Adaptive Neuro-Fuzzy Inference System (ANFIS) and Sobol Approaches for Modeling and Sensitivity Analysis of the Biosorption of Triglyceride from the Blood Serum [Volume 19, Issue 1, 2022, Pages 51-65]
Salehi, E. 3D simulation of carbon monoxide purification with CuCl(7.0)/AC by pressure swing adsorption process [Volume 19, Issue 4, 2022, Pages 20-37]
Salehi, E. Intensification of Azeotropic Distillation for Ethanol Dehydration using Data-based Optimization, Steady-state Simulation and Sensitivity Analysis [Volume 20, Issue 2, 2023, Pages 15-32]
Salehi, S. M. A three-dimensional mathematical model for drug delivery from drug-eluting stents [Volume 12, Issue 4, 2015, Pages 15-27]
Salimi, H. Improved numerical simulation of the low temperature Fischer-Tropsch synthesis in a trickle bed reactor [Volume 15, Issue 1, 2018, Pages 1-17]
Salimi, S. Computational fluid dynamics study and GA modeling approach of the bend angle effect on thermal-hydraulic characteristics in zigzag channels [Volume 16, Issue 3, 2019, Pages 70-83]
Samimi, A. Prediction of the Effect of Polymer Membrane Composition in a Dry Air Humidification Process via Neural Network Modeling [Volume 13, Issue 1, 2016, Pages 73-83]
Sanaeepur, H. Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]
Sanaeepur, H. The Effect of the Methyl Functional Group on the Physicochemical and Structural Properties of a Synthesized Semi-Aromatic Polyimides [Volume 19, Issue 2, 2022, Pages 89-99]
Sanaeepur, H.R 3D simulation of carbon monoxide purification with CuCl(7.0)/AC by pressure swing adsorption process [Volume 19, Issue 4, 2022, Pages 20-37]
Sarbanha, Ali Akbar Mixing of the Immiscible Liquids in the Entrance Region of a T-Type Chamber Using Laser Induced Fluorescence (LIF) Method [Volume 13, Issue 3, 2016, Pages 32-42]
Sarlak, Sh. Intensification of the Mass Transfer of the Green CO2 Capture Employing the Ternary Solution of Alkanolamine-Amino Acid [Volume 20, Issue 4, 2024, Pages 27-39]
Seyedmohaghegh, S. M. Prediction of polyvinyl alcohol (PVOH) properties synthesized at various conditions by artificial neural networks technique [Volume 14, Issue 2, 2017, Pages 3-16]
Seyyedebrahimi, S.A An Investigation of the Effects of Dopamine on the Superhydrophobicity of Carbonyl Iron Particles with Stearic Acid [Volume 17, Issue 4, 2020, Pages 49-59]
Shafiee, M. Removal of Pb (II) From Wastewater Using Henna; Optimization of Operational Conditions [Volume 15, Issue 4, 2018, Pages 17-26]
Shafieeardestani, M. Preparation and Drug-Delivery Properties of Metal-Organic Framework HKUST-1 [Volume 16, Issue 4, 2019, Pages 73-80]
Shafiee Langari, F. Experimental Study and Mathematical Modeling of the Osmotic Drying Process [Volume 12, Issue 3, 2015, Pages 15-32]
Shafiei, F. Nelder-Mead algorithm optimization and Galerkin’s method thermal performance analysis of circular porous fins with various profiles in fully wet conditions [Volume 16, Issue 3, 2019, Pages 37-57]
Shafiei, S Optimization of Hydrogen Distribution Network by Imperialist Competitive AlgorithmIn [Volume 13, Issue 3, 2016, Pages 63-77]
Shafiei, S. Thermodynamic and Heat Transfer Evaluation of Pocket Drying Section in the Multi-Cylinder Dryers of Paper Machine [Volume 13, Issue 2, 2016, Pages 57-70]
Shafiei, Sirous Isothermal Reactor Network Synthesis Using Coupled NonDominated Sorting Genetic Algorithm-II (NSGAII) with Quasi Linear Programming (LP) Method [Volume 12, Issue 3, 2015, Pages 77-95]
Shahgholian, N. Pilot Plant Scale Interesterification of Special Fat Blends to Prepare Zero-Trans Margarine: Monitoring the Fatty Acids content and Physicochemical Properties [Volume 19, Issue 4, 2022, Pages 76-94]
Shahsavarzadeh-Jangi, P. Assessment of Bioavailability of Crude Oil in Three Different Agricultural Soils [Volume 12, Issue 1, 2015, Pages 3-12]
Shahzamani, Mahnaz Relationship between the Microstructure and Gas Transport Properties of Polyurethane/Polycaprolactone Blends [Volume 13, Issue 3, 2016, Pages 78-88]
Sharafi, P. 3D simulation of carbon monoxide purification with CuCl(7.0)/AC by pressure swing adsorption process [Volume 19, Issue 4, 2022, Pages 20-37]
Shariatinia, Z. Fabrication of Chitosan-Polyethylene Oxide Electrospun Nanofibrous Mats Containing Green Tea Extract [Volume 15, Issue 2, 2018, Pages 65-77]
Shariatmadar, F. S. An Empirical Correlation to Predict the Ignition Delay Time for Some Hydrocarbon Fuels [Volume 13, Issue 1, 2016, Pages 84-97]
Shariaty-Niassar, M. An Investigation of the Effects of Dopamine on the Superhydrophobicity of Carbonyl Iron Particles with Stearic Acid [Volume 17, Issue 4, 2020, Pages 49-59]
Sharifnia, Sh. Degradation of Diclofenac Sodium under Solar Light Irradiation by Photocatalytic Performance of ZnO and V2O5 [Volume 15, Issue 4, 2018, Pages 1-16]
Sharifzadeh, E. The Influences of the Nanoparticles Related Parameters on the Tensile Strength of Polymer Nanocomposites [Volume 17, Issue 1, 2020, Pages 65-78]
Sharifzadeh, E. Synthesis and Characterization of Waterglass-Based Silica Aerogel Under Heat Treatment for Adsorption of Nitrate from Water: Batch and Column Studies [Volume 16, Issue 4, 2019, Pages 53-72]
Sharifzadeh, E. Investigating the Effects of Hollow Graphene Oxide Nanoparticles on the Thermal/Mechanical Properties of Polymer Nanocomposites: Experimental, Analytical and Simulation Approaches [Volume 18, Issue 2, 2021, Pages 71-83]
Shavandi, M. Optimization of factors affecting on sulfide oxidation from synthetic spent caustic by Haloalkaliphilic Thioalkalivibrio versutus by focus on sodium ion effect: Application of response surface methodology [Volume 14, Issue 1, 2017, Pages 74-87]
Shayegan, J. Study of the Industrial Wastewater Treatment by a Membrane Bioreactor (MBR) Case Study: Cookie Factory Wastewater [Volume 17, Issue 3, 2020, Pages 74-84]
Shayesteh, k. Optimization and Comparison of Ni and Cd Removal Using Zinc Powder with the Response Surface Methodology [Volume 17, Issue 4, 2020, Pages 3-20]
Shayesteh, K. Effect of Particle Size of Zinc Powder on the Efficiency of Ni-Cd Cementation in Cold Purification Reactor [Volume 20, Issue 3, 2023, Pages 90-103]
Shenavar, Abolfazl Preparation of Flame Retardant Polystyrene via In-Situ Bulk Polymerization Method and Evaluation of its Flammability Properties [Volume 13, Issue 4, 2016, Pages 62-70]
Shirazian, S. Dehydration of Natural Gas Using Synthesized Chabazite Zeolite Membranes [Volume 12, Issue 1, 2015, Pages 13-21]
Shirvani, S. Hydroconversion of Furfural over Cu-Cr/SiO2 Nanocatalysts: A Comparative Study [Volume 15, Issue 2, 2018, Pages 38-51]
Shojaei, Z. Removal of Cerium from Aqueous Solutions by Amino Phosphate Modified Nano TiO2: Kinetic, and Equilibrium Studies [Volume 13, Issue 2, 2016, Pages 3-21]
Shojaosadati, S. A Optimization of factors affecting on sulfide oxidation from synthetic spent caustic by Haloalkaliphilic Thioalkalivibrio versutus by focus on sodium ion effect: Application of response surface methodology [Volume 14, Issue 1, 2017, Pages 74-87]
Shojaosadati, S. A. Assessment of Bioavailability of Crude Oil in Three Different Agricultural Soils [Volume 12, Issue 1, 2015, Pages 3-12]
Shokouhi, M. Experimental Investigation on the Solubility and Initial Rate of Absorption of CO2 in Mixture of Amine-Functionalized Ionic Liquids and Physical Solvents [Volume 12, Issue 1, 2015, Pages 68-77]
Shokrollahzadeh, S. Comparison the performance of different reverse osmosis membrane modules by CFD modeling [Volume 16, Issue 1, 2019, Pages 101-116]
Simiari, M. Synthesis, Characterization and Analysis of Thermal Properties and burning rate of Zr/BaCrO4 mixture [Volume 20, Issue 2, 2023, Pages 3-14]
Sinkakarimi, A. CFD Study of Concave Turbine [Volume 16, Issue 2, 2019, Pages 103-118]
Sirousazar, M. Fractional Calculus Method Applied To the Apple Rings Candying in Osmotic Drying Process [Volume 17, Issue 1, 2020, Pages 90-102]
Sobhanian, Fahimeh Mixing of the Immiscible Liquids in the Entrance Region of a T-Type Chamber Using Laser Induced Fluorescence (LIF) Method [Volume 13, Issue 3, 2016, Pages 32-42]
Soltani, H Optimization of Hydrogen Distribution Network by Imperialist Competitive AlgorithmIn [Volume 13, Issue 3, 2016, Pages 63-77]
Soltani, Hadi Isothermal Reactor Network Synthesis Using Coupled NonDominated Sorting Genetic Algorithm-II (NSGAII) with Quasi Linear Programming (LP) Method [Volume 12, Issue 3, 2015, Pages 77-95]
Soltani, S. Prediction of polyvinyl alcohol (PVOH) properties synthesized at various conditions by artificial neural networks technique [Volume 14, Issue 2, 2017, Pages 3-16]
Soltani-Tehrani, F. Metal-Organic Frameworks in Systems of Drug Delivery: Review [Volume 20, Issue 1, 2023, Pages 36-50]
Soodmand, M. H. Modeling and Simulation of a Divided Wall Column for 1,3 Butadiene Purification [Volume 12, Issue 1, 2015, Pages 60-67]
Soroushnia, Arezou Transdermal Delivery of Desmopressin Acetate from Water-in- Oil Nano/submicron Emulsion Systems [Volume 13, Issue 4, 2016, Pages 1-13]
Sotude.Gharebagh, R. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
S P, Manjunath Development and Evaluation of the Magnesium Potassium Phosphate Cement Based Refractory [Volume 17, Issue 4, 2020, Pages 69-78]
Srivastava, Sh. Kinetic, mechanistic and thermodynamic investigations on Iridium (III) catalyzed oxidation of D-Mannitol by N-chloro-p-toluenesulfonamide in perchloric acid medium [Volume 14, Issue 4, 2017, Pages 77-89]

T

Tabar Heidar, K. Effect of electrokinetic on biodegradation of fluorene and phenanthrene in soil [Volume 13, Issue 2, 2016, Pages 71-79]
Tabibiazar, M. A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]
Taeb, A. Effect of drying rate on the performance of Pt-Sn-K/γ-Al2O3 catalyst for propane dehydrogenation [Volume 18, Issue 1, 2021, Pages 16-24]
Taghizadeh, Seyed Mojtaba Transdermal Delivery of Desmopressin Acetate from Water-in- Oil Nano/submicron Emulsion Systems [Volume 13, Issue 4, 2016, Pages 1-13]
Taghizadeh, S. R. Reverse osmosis desalination using thin film composite polysulfone-zinc oxide mixed matrix membrane [Volume 20, Issue 1, 2023, Pages 67-77]
Taheri, P. Preparation and Drug-Delivery Properties of Metal-Organic Framework HKUST-1 [Volume 16, Issue 4, 2019, Pages 73-80]
Tahmasbi, S. Application of the Adaptive Neuro-Fuzzy Inference System (ANFIS) and Sobol Approaches for Modeling and Sensitivity Analysis of the Biosorption of Triglyceride from the Blood Serum [Volume 19, Issue 1, 2022, Pages 51-65]
Tahmasbi, V. Application of the Adaptive Neuro-Fuzzy Inference System (ANFIS) and Sobol Approaches for Modeling and Sensitivity Analysis of the Biosorption of Triglyceride from the Blood Serum [Volume 19, Issue 1, 2022, Pages 51-65]
Tahriri zangeneh, F. Effect of drying rate on the performance of Pt-Sn-K/γ-Al2O3 catalyst for propane dehydrogenation [Volume 18, Issue 1, 2021, Pages 16-24]
Takapoui, M. Developing Collagen Hydrogel Including Bioactive Glass Nanoparticles for being used in Bone Tissue Engineering [Volume 20, Issue 4, 2024, Pages 3-12]
Takht Ravanchi, M. The Effect of the Method of Adding Impregnation Solutions on the Properties and Performance of the Pd-Ag/Al2O3 Catalyst in the Tail-End Acetylene Selective Hydrogenation. [Volume 18, Issue 2, 2021, Pages 19-30]
Talaghat, M. r. Nelder-Mead algorithm optimization and Galerkin’s method thermal performance analysis of circular porous fins with various profiles in fully wet conditions [Volume 16, Issue 3, 2019, Pages 37-57]
Talaghat, M.R. Optimization of Semiregenerative Catalytic Naphtha Reforming Unit to Enhance Octane Number and Reformate Yield [Volume 15, Issue 2, 2018, Pages 52-64]
Talebizadeh, A.R. Methane oxy-steam reforming over a highly efficient Ni/Al2O3 nanocatalyst prepared by microwave-assisted impregnation method [Volume 14, Issue 4, 2017, Pages 3-16]
Tarjomannejad, A. Catalytic oxidation of toluene over LaBO3 (B= Fe, Mn and Co) and LaCo0.7B′0.3O3 (B′= Fe and Mn) perovskite-type [Volume 14, Issue 1, 2017, Pages 67-73]
Tarjomannejad, A. Experimental and Kinetic Study of CO Oxidation Over LaFe1-xCuxO3 (x=0, 0.2, 0.4, 0.6) Perovskite-Type Oxides [Volume 15, Issue 2, 2018, Pages 91-102]
Tohfegar, E. The Influences of the Nanoparticles Related Parameters on the Tensile Strength of Polymer Nanocomposites [Volume 17, Issue 1, 2020, Pages 65-78]
Tohfegar, E. Synthesis and Characterization of Waterglass-Based Silica Aerogel Under Heat Treatment for Adsorption of Nitrate from Water: Batch and Column Studies [Volume 16, Issue 4, 2019, Pages 53-72]
Torab-Mostaedi, M. Removal of Cerium from Aqueous Solutions by Amino Phosphate Modified Nano TiO2: Kinetic, and Equilibrium Studies [Volume 13, Issue 2, 2016, Pages 3-21]
Torab-Mostaedi, M. Stochastic Comparisons of Probability Distribution Functions with Experimental Data in a Liquid-Liquid Extraction Column for Determination of Drop Size Distributions [Volume 14, Issue 3, 2017, Pages 82-95]
Towfighi, J. Characterization and optimization of SAPO-34 catalysts synthesized by mixed templates in MTO reaction [Volume 12, Issue 4, 2015, Pages 4-14]

V

Vaferi, B. Mathematical simulation of thermal behavior of moving bed reactors [Volume 14, Issue 4, 2017, Pages 48-58]
Vahdani, M. R. Effect of the Carbon Source Flow Rate on the Quality of the Growth of Super-Aligned Carbon Nanotube Arrays by the Chemical Vapor Deposition Method [Volume 20, Issue 3, 2023, Pages 45-53]
Vahidfard, V. Effect of Particle Size of Zinc Powder on the Efficiency of Ni-Cd Cementation in Cold Purification Reactor [Volume 20, Issue 3, 2023, Pages 90-103]
Vahidi, O. Induced tissue cell death by magnetic nanoparticle hyperthermia for cancer treatment: an in silico study [Volume 14, Issue 4, 2017, Pages 59-79]
Vahidi, O. Designing a glycemic control strategy to maintain glucose homeostasis and prevent hypoglycemia for subjects with type 1 diabetes [Volume 15, Issue 3, 2018, Pages 34-52]
Valeh-e-Sheyda, P. Intensification of the Mass Transfer of the Green CO2 Capture Employing the Ternary Solution of Alkanolamine-Amino Acid [Volume 20, Issue 4, 2024, Pages 27-39]
Varmazyar, M. Dynamic Behavior of an Oil Droplet Adhered to the Wall Surface in a Channel Flow by the Lattice Boltzmann Method [Volume 15, Issue 1, 2018, Pages 35-48]
Varmira, K. Synthesis the Bioactive Conjugates of Nisin-Xanthan through the Maillard Reaction at Moderate Temperature [Volume 20, Issue 1, 2023, Pages 78-91]
Verma, A. Kinetic, mechanistic and thermodynamic investigations on Iridium (III) catalyzed oxidation of D-Mannitol by N-chloro-p-toluenesulfonamide in perchloric acid medium [Volume 14, Issue 4, 2017, Pages 77-89]
Vossoughi, Manoucher Kinetics investigation of cell growth, xanthan production and sugar cane molasses consumption by Xanthomonas campestris [Volume 12, Issue 4, 2015, Pages 84-92]

Y

Yasemi, M. Microfluidic extraction of tannic acid from Quercus leaves [Volume 15, Issue 3, 2018, Pages 15-33]
Yasrebi, N. Study on the Effect of Humidity on Electrical Properties of Copper-Silica Aerogel [Volume 12, Issue 2, 2015, Pages 3-12]
Yavari, N. Modified and unmodified Graphite/unsaturated polyester resin composites: thermal and mechanical behavior [Volume 17, Issue 2, 2020, Pages 14-33]
Yazdian, F. Anticancer and Antioxidant Properties of Ag NPs Coated with BSA NPs [Volume 12, Issue 1, 2015, Pages 22-29]
Yegani, R. CO2 biofixation by Dunaliella Salina in batch and semi-continuous cultivations, using hydrophobic and hydrophilic poly ethylene (PE) hollow fiber membrane photobioreactors [Volume 13, Issue 1, 2016, Pages 47-59]
Younesi, H. Synthesis of a high characteristics activated carbon from walnut shell for the removal of Cr (VI) and Fe (II) from aqueous solution: single and binary solutes adsorption [Volume 12, Issue 4, 2015, Pages 28-51]
Yousefi, A. Prediction of the pharmaceutical solubility in water and organic solvents via different soft computing models [Volume 16, Issue 1, 2019, Pages 83-100]
Yousefi, A. A. Investigating the Performance of the Graphene-WO3-TiO2 Ternary Composite in Dye-Sensitized Solar Cells [Volume 20, Issue 4, 2024, Pages 13-26]
Youssef, A. Thermal Conductivity of Water Based Nanofluids Containing Decorated Multi Walled Carbon Nanotubes with Different Amount of TiO2 Nanoparticles [Volume 12, Issue 1, 2015, Pages 30-40]

Z

Zabihollahpoor, A. Assessment of effective factors on bacterial oxidation of ferrous iron by focusing on sweetening natural gas [Volume 15, Issue 1, 2018, Pages 18-34]
Zahedipoor, A .R. Reverse osmosis desalination using thin film composite polysulfone-zinc oxide mixed matrix membrane [Volume 20, Issue 1, 2023, Pages 67-77]
Zakeri, Ali Kinetics investigation of cell growth, xanthan production and sugar cane molasses consumption by Xanthomonas campestris [Volume 12, Issue 4, 2015, Pages 84-92]
Zakeri, M. Incorporation of Metal Oxide on Mica Flakes as a Green Pearlescent Pigment: Preparation and Analysis [Volume 17, Issue 2, 2020, Pages 34-43]
Zakhireh, S. High-Performance Hydroxyapatite Scaffold Combined with Selenium and Reduced Graphene Oxide for Bone Regeneration Applications [Volume 19, Issue 1, 2022, Pages 66-76]
Zamani, M. Reverse osmosis desalination using thin film composite polysulfone-zinc oxide mixed matrix membrane [Volume 20, Issue 1, 2023, Pages 67-77]
Zangouie, M. Study of the Industrial Wastewater Treatment by a Membrane Bioreactor (MBR) Case Study: Cookie Factory Wastewater [Volume 17, Issue 3, 2020, Pages 74-84]
Zarei, M. A. An Empirical Correlation to Predict the Ignition Delay Time for Some Hydrocarbon Fuels [Volume 13, Issue 1, 2016, Pages 84-97]
Zarei, M.A. Optimizing of Synthesis of High Purity HMX Using Polyphosphoric Acid by Response Surface Method [Volume 20, Issue 2, 2023, Pages 50-61]
Zarei, T. Experimental study of hydrodynamic characteristics of improved sieve tray with push valves [Volume 14, Issue 1, 2017, Pages 40-51]
Zarghami, R. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
Zarghami, R. Effect of Isopropanol on the Fluidization of Hydrophilic Titanium Nano-Powder [Volume 19, Issue 2, 2022, Pages 51-67]
Zebarjad, S. M. Thermal Conductivity of Water Based Nanofluids Containing Decorated Multi Walled Carbon Nanotubes with Different Amount of TiO2 Nanoparticles [Volume 12, Issue 1, 2015, Pages 30-40]
Zeynali, M. E. Effect of operating conditions on divinylbenzene production in diethyl benzene dehydrogenation reactor [Volume 15, Issue 4, 2018, Pages 93-104]
Ziaei Rad, Z. Biological Conversion of Normal Chain Octadecane by Native Microbial Consortia [Volume 12, Issue 2, 2015, Pages 50-58]
Ziarifar, Amir Simulation, Control and Experimental Analysis of 1,3Butadiene Purification Unit [Volume 13, Issue 4, 2016, Pages 33-45]
Zivdar, M. Modeling and Simulation of a Divided Wall Column for 1,3 Butadiene Purification [Volume 12, Issue 1, 2015, Pages 60-67]

Browse Author Index

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ALL

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

R

S

T

V

Y

Z