A

  • Abolhasani, Mahdieh Investigating the performance of an ultrasonic-assisted rotating packed bed reactor for micromixing efficiency enhancement [Volume 18, Issue 4, 2022]

  • Ader, F. Investigating the Effects of Hollow Graphene Oxide Nanoparticles on the Thermal/Mechanical Properties of Polymer Nanocomposites: Experimental, Analytical and Simulation Approaches [Volume 18, Issue 2, 2021, Pages 71-83]

  • Ahmadi Danesh Ashtian, H. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]

  • Akbarzadeh, Abolfazl Synthesis and characterization of doxorubicin coated with magnetic copolymer polycaprolactone-polyethylene glycol for use in the cancer treatment [Volume 18, Issue 4, 2022]

  • Alimohammadi, Nemat Performance comparison of heterogeneous Pd-supported catalysts: Pd/ZSM-5, Pd/13X and Pd/Al₂O₃ for hydrogenation of benzene in gasoline [Volume 18, Issue 4, 2022]

  • Amirabedi, Parya Mathematical Modeling and Parameters Optimization of the Degradation of Acrylonitrile in Biofilters [Volume 18, Issue 3, 2021, Pages 3-15]

  • Amirkhani, L. Investigating the Influence of Nanoclosite Particles on the Mechanical Properties of Polystyrene Using Artificial Neural Networks [Volume 18, Issue 2, 2021, Pages 59-70]

  • Amirkhani, Leila Synthesis and characterization of doxorubicin coated with magnetic copolymer polycaprolactone-polyethylene glycol for use in the cancer treatment [Volume 18, Issue 4, 2022]

  • Arjmand, R. Flocculation Behavior of Ultrafine Quartz and Magnetite as the Main Mineral Components of Iron Ore Tailings [Volume 18, Issue 2, 2021, Pages 3-18]

  • Ashrafmansouri, ُS.Saba Predicting Ionic Liquids’ Second-Order Derivative Properties based on a Combination of SAFT-γ EoS and a GC Technique [Volume 18, Issue 1, 2021, Pages 56-70]

B

  • Behnamfard, A. Flocculation Behavior of Ultrafine Quartz and Magnetite as the Main Mineral Components of Iron Ore Tailings [Volume 18, Issue 2, 2021, Pages 3-18]

D

  • Davoodbeygi, Y. Medium Temperature Shift Reaction Over Copper-Ceria catalyst in Fixed-Bed and Microchannel Reactors [Volume 18, Issue 1, 2021, Pages 46-51]

  • Davoodbeygi, Y. Investigation of the effect of DamKohler and Stanton non-dimensional numbers on the stability of continuous stirred tank reactors [Volume 18, Issue 2, 2021, Pages 48-58]

  • Dehghanzadeh, Reza Mathematical Modeling and Parameters Optimization of the Degradation of Acrylonitrile in Biofilters [Volume 18, Issue 3, 2021, Pages 3-15]

  • Derakhshanfard, F. Investigating the Influence of Nanoclosite Particles on the Mechanical Properties of Polystyrene Using Artificial Neural Networks [Volume 18, Issue 2, 2021, Pages 59-70]

E

  • Emami Satellou, A. A. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]

  • Entezari, K. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering [Volume 18, Issue 1, 2021, Pages 3-15]

F

  • Fathollahi, Manoochehr Optimization of Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide based respiratory air Tablets Using Taguchi Method [Volume 18, Issue 4, 2022]

  • Fatthi, Sohrab Performance comparison of heterogeneous Pd-supported catalysts: Pd/ZSM-5, Pd/13X and Pd/Al₂O₃ for hydrogenation of benzene in gasoline [Volume 18, Issue 4, 2022]

G

  • Ghaemi, Ahad Evaluation of Silica gel adsorbent potential for carbon dioxide capture: experimental and modeling [Volume 18, Issue 4, 2022]

  • Ghasemi, S. Flocculation Behavior of Ultrafine Quartz and Magnetite as the Main Mineral Components of Iron Ore Tailings [Volume 18, Issue 2, 2021, Pages 3-18]

  • Ghasemkhani, Hamid Drying Apple Slices in a Rotating-Tray Convective Dryer: A Study on Dehydration Characteristics and Qualitative Attributes [Volume 18, Issue 3, 2021, Pages 16-32]

  • Ghazanchaie, S. Investigating the Influence of Nanoclosite Particles on the Mechanical Properties of Polystyrene Using Artificial Neural Networks [Volume 18, Issue 2, 2021, Pages 59-70]

  • Ghobadian, Barat Techno-Economic Optimization of a Continuous Process for Biodiesel Production from Waste Vegetable Oils [Volume 18, Issue 4, 2022]

H

  • Hajimohammadi, Reza Synthesis and characterization of doxorubicin coated with magnetic copolymer polycaprolactone-polyethylene glycol for use in the cancer treatment [Volume 18, Issue 4, 2022]

  • Hassanpour souderjani, H. Oxidative desulfurization of petroleum products using decorated cobalt oxide on the surface of modified carbon nanotubes-ICHEC-1887 [Volume 18, Issue 1, 2021, Pages 36-45]

  • Hefzi Lotfabadi, Mahdi Investigating the performance of an ultrasonic-assisted rotating packed bed reactor for micromixing efficiency enhancement [Volume 18, Issue 4, 2022]

  • Hemmati, H. Theoretical and Empirical Equilibrium Concentration for the Dry Reforming of Methane [Volume 18, Issue 2, 2021, Pages 31-47]

  • Hemmati, Hamed Investigating the Activity of the Supported Bimetallic Ni-Co Catalysts on the Dry Reforming of Methane [Volume 18, Issue 3, 2021, Pages 63-73]

  • Hosseini, M. Investigation of the effect of DamKohler and Stanton non-dimensional numbers on the stability of continuous stirred tank reactors [Volume 18, Issue 2, 2021, Pages 48-58]

  • Hosseini, Seyyed Ghorban Optimization of Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide based respiratory air Tablets Using Taguchi Method [Volume 18, Issue 4, 2022]

I

  • Irankhah, A. Medium Temperature Shift Reaction Over Copper-Ceria catalyst in Fixed-Bed and Microchannel Reactors [Volume 18, Issue 1, 2021, Pages 46-51]

J

  • Jafarkhani, M. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering [Volume 18, Issue 1, 2021, Pages 3-15]

  • Jahangiri, Sahar Synthesis and characterization of doxorubicin coated with magnetic copolymer polycaprolactone-polyethylene glycol for use in the cancer treatment [Volume 18, Issue 4, 2022]

  • Jahanshahi, M. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering [Volume 18, Issue 1, 2021, Pages 3-15]

K

  • Kabir, H. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering [Volume 18, Issue 1, 2021, Pages 3-15]

  • Kamandar, Mohamad Reza Drying Apple Slices in a Rotating-Tray Convective Dryer: A Study on Dehydration Characteristics and Qualitative Attributes [Volume 18, Issue 3, 2021, Pages 16-32]

  • Karimian, Azam Optimization of Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide based respiratory air Tablets Using Taguchi Method [Volume 18, Issue 4, 2022]

  • Kazemi-Beydokhti, A. Oxidative desulfurization of petroleum products using decorated cobalt oxide on the surface of modified carbon nanotubes-ICHEC-1887 [Volume 18, Issue 1, 2021, Pages 36-45]

  • Khoshnam, Farhad Drying Apple Slices in a Rotating-Tray Convective Dryer: A Study on Dehydration Characteristics and Qualitative Attributes [Volume 18, Issue 3, 2021, Pages 16-32]

M

  • Mashhadimoslem, Hossein Evaluation of Silica gel adsorbent potential for carbon dioxide capture: experimental and modeling [Volume 18, Issue 4, 2022]

  • Mohammadi, Abbas Techno-Economic Optimization of a Continuous Process for Biodiesel Production from Waste Vegetable Oils [Volume 18, Issue 4, 2022]

  • Moosavi, H. The Effect of the Method of Adding Impregnation Solutions on the Properties and Performance of the Pd-Ag/Al2O3 Catalyst in the Tail-End Acetylene Selective Hydrogenation. [Volume 18, Issue 2, 2021, Pages 19-30]

  • Moradi, Gh. Theoretical and Empirical Equilibrium Concentration for the Dry Reforming of Methane [Volume 18, Issue 2, 2021, Pages 31-47]

  • Moradi, Gholamreza Investigating the Activity of the Supported Bimetallic Ni-Co Catalysts on the Dry Reforming of Methane [Volume 18, Issue 3, 2021, Pages 63-73]

  • Moraveji, Mostafa Optimization of the Adsorption of Pb(II) and Zn(II) onto the EDTA-Modified MnO2/Chitosan/Fe3O4 Nanocomposite from an Aqueous Solution Using RSM According to the CCD Method [Volume 18, Issue 3, 2021, Pages 33-51]

N

  • Nejad, Gh. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]

  • Niazi, M. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering [Volume 18, Issue 1, 2021, Pages 3-15]

  • Norouzi, Mahdi Optimization of Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide based respiratory air Tablets Using Taguchi Method [Volume 18, Issue 4, 2022]

O

  • Oudi, A. H. Investigation of the effect of DamKohler and Stanton non-dimensional numbers on the stability of continuous stirred tank reactors [Volume 18, Issue 2, 2021, Pages 48-58]

  • Ovaysi, Saeed CFD Modeling and Industrial Evaluation of a Cyclone Cascade for the Production of the HDPE Catalyst [Volume 18, Issue 3, 2021, Pages 74-85]

P

  • Panahadeh, Adel Optimization of the Adsorption of Pb(II) and Zn(II) onto the EDTA-Modified MnO2/Chitosan/Fe3O4 Nanocomposite from an Aqueous Solution Using RSM According to the CCD Method [Volume 18, Issue 3, 2021, Pages 33-51]

  • Parvareh, Arsalan Optimization of the Adsorption of Pb(II) and Zn(II) onto the EDTA-Modified MnO2/Chitosan/Fe3O4 Nanocomposite from an Aqueous Solution Using RSM According to the CCD Method [Volume 18, Issue 3, 2021, Pages 33-51]

  • Pourshayan, A. Ebrahim Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]

R

  • Rabbani, A. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]

  • Rabbani, Y. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]

  • Rahimi Fard, M. The Effect of the Method of Adding Impregnation Solutions on the Properties and Performance of the Pd-Ag/Al2O3 Catalyst in the Tail-End Acetylene Selective Hydrogenation. [Volume 18, Issue 2, 2021, Pages 19-30]

  • Rezvan Leylan, Seyyed Alireza Optimization of Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide based respiratory air Tablets Using Taguchi Method [Volume 18, Issue 4, 2022]

S

  • Sahebdelfar, S. The Effect of the Method of Adding Impregnation Solutions on the Properties and Performance of the Pd-Ag/Al2O3 Catalyst in the Tail-End Acetylene Selective Hydrogenation. [Volume 18, Issue 2, 2021, Pages 19-30]

  • Sharifzadeh, E. Investigating the Effects of Hollow Graphene Oxide Nanoparticles on the Thermal/Mechanical Properties of Polymer Nanocomposites: Experimental, Analytical and Simulation Approaches [Volume 18, Issue 2, 2021, Pages 71-83]

T

  • Taeb, A. Effect of drying rate on the performance of Pt-Sn-K/γ-Al2O3 catalyst for propane dehydrogenation [Volume 18, Issue 1, 2021, Pages 16-24]

  • Tahriri zangeneh, F. Effect of drying rate on the performance of Pt-Sn-K/γ-Al2O3 catalyst for propane dehydrogenation [Volume 18, Issue 1, 2021, Pages 16-24]

  • Takht Ravanchi, M. The Effect of the Method of Adding Impregnation Solutions on the Properties and Performance of the Pd-Ag/Al2O3 Catalyst in the Tail-End Acetylene Selective Hydrogenation. [Volume 18, Issue 2, 2021, Pages 19-30]