Volume 17 (2020)
Volume 16 (2019)
Volume 15 (2018)
Volume 14 (2017)
Volume 13 (2016)
Volume 12 (2015)
Volume 11 (2014)
Volume 10 (2013)
Volume 9 (2012)
Volume 8 (2011)
Volume 7 (2010)
Volume 6 (2009)
Volume 5 (2008)
Volume 4 (2007)
Volume 3 (2006)
Volume 2 (2005)
Volume 1 (2004)
Full article Biomedical and Biotechnology,
1. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering

Sh. mashayekhiyan; M. Jahanshahi; M. Jafarkhani; K. Entezari; M. Niazi; H. Kabir

Volume 18, Issue 1 , Winter 2021, Pages 3-15

http://dx.doi.org/10.22034/ijche.2021.130363

Abstract
   Electrospun nanofiber is one of the promising alternatives for use in tissue engineering and drug delivery due to its controllable characteristics. However, choosing an appropriate biomaterial for a specific tissue regeneration plays a significant role in fabricating functional tissue-engineered ...  Read More

Full length Reaction Engineering, Kinetics and Catalysts,
2. Effect of drying rate on the performance of Pt-Sn-K/γ-Al2O3 catalyst for propane dehydrogenation

F. Tahriri zangeneh; S. sahebdelfar; A. Taeb

Volume 18, Issue 1 , Winter 2021, Pages 16-24

http://dx.doi.org/10.22034/ijche.2021.129751

Abstract
  The dehydrogenation of propane to propylene over Pt-Sn-K/γ-Al2O3 catalysts prepared by sequential impregnation was studied. Three drying rates, that is, 5, 10 and 15 °C/min were applied after incipient wetness impregnation of the support (1.6–1.8 mm in diameter) with KNO3. The obtained ...  Read More

Full article Materials synthesize and production
3. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve

A. Ebrahim Pourshayan; A. Rabbani; S. farahani; Y. Rabbani; H. Ahmadi Danesh Ashtian; M. shariat; Gh. Nejad; A. A. Emami Satellou

Volume 18, Issue 1 , Winter 2021, Pages 25-35

http://dx.doi.org/10.22034/ijche.2021.131248

Abstract
   Magnetorheological fluids contain suspended magnetic particles that arrange in chains in the presence of a magnetic field, causing the conversion of the fluid from a liquid state to a quasi-solid state. These fluids can be used in valves as a tool for pressure drop and flow interruption. This research ...  Read More

Full article Environmental Engineering,
4. Oxidative Desulfurization of Petroleum Products Using Decorated Cobalt Oxide on the Surface of Modified Carbon Nanotubes

H. Hassanpour souderjani; A. Kazemi-Beydokhti

Volume 18, Issue 1 , Winter 2021, Pages 36-45

http://dx.doi.org/10.22034/ijche.2021.130364

Abstract
   Due to the dangerous effects of sulfur in hydrocarbon compounds and its impact on environmental health, a new formulation based on surface-modified carbon nanotubes and a cobalt oxide has been prepared. Oxidative desulfurization is the main section of this process that is utilized to reduce this ...  Read More

Full article Reaction Engineering, Kinetics and Catalysts,
5. Medium Temperature Shift Reaction Over Copper-Ceria catalyst in Fixed-Bed and Microchannel Reactors

A. Irankhah; Y. Davoodbeygi

Volume 18, Issue 1 , Winter 2021, Pages 46-51

http://dx.doi.org/10.22034/ijche.2021.139288

Abstract
  One of the effective catalysts for hydrogen purification and production via medium temperature shift reaction, is Cu-Ce solid solution. Cu0.1Ce0,9O1.9 was produced using co-precipitation method and then was utilized as support for 5Cu/Ce0.9Cu0.1O1.9 catalyst which was synthesized employing wet impregnation ...  Read More

Full article Thermodynamics,
6. Predicting Ionic Liquids’ Second-Order Derivative Properties based on a Combination of SAFT-γ EoS and a GC Technique

ُS.Saba Ashrafmansouri

Volume 18, Issue 1 , Winter 2021, Pages 56-70

http://dx.doi.org/10.22034/ijche.2021.134553

Abstract
  Considering the high number of ionic liquids (ILs) and impracticability of laboratory measurements for all ILs’ properties, applying theoretical methods to predict the properties of this large family can be very helpful. In the present research, ILs’ thermophysical properties are predicted ...  Read More