Volume 18 (2021)
Volume 17 (2020)
Volume 16 (2019)
Volume 15 (2018)
Volume 13 (2016)
Volume 12 (2015)
Volume 11 (2014)
Volume 10 (2013)
Volume 9 (2012)
Volume 8 (2011)
Volume 7 (2010)
Volume 6 (2009)
Volume 5 (2008)
Volume 4 (2007)
Volume 3 (2006)
Volume 2 (2005)
Volume 1 (2004)
Full article Transport Phenomena,
1. Transient thermal study of recuperative tube in tube heat exchanger operating in refrigeration system using experimental test and mathematical simulation

A. Saberimoghaddam; M. M Bahri Rasht Abadi

Volume 14, Issue 3 , Summer 2017, Pages 3-18

  Joule-Thomson cooling systems are used in refrigeration and liquefaction processes. There are extensive studies on Joule-Thomson cryogenic systems, but most of them coverage steady state conditions or lack from experimental data. In the present work, transient thermal behavior of Joule-Thomson cooling ...  Read More

Full article Separation Technology,
2. Improvement of gas separation properties of polyurethane membrane using plasma grafting

P. Azadi; Sh. Hassanajili

Volume 14, Issue 3 , Summer 2017, Pages 19-30

  In recent years, plasma treatments have given good results since they offer high technological efficiency with low waste generation. One of the most important characteristics of plasma methods is their action only on a thin surface layer, whereas the bulk of sample remains unchanged and the modified ...  Read More

Full article Separation Technology,
3. Adsorption and Desorption Process of Chromium Ions Using Magnetic Iron Oxide Nanoparticles and Its Relevant Mechanism

M. Jadidi; N. Etesami; M. Nasr Esfahany

Volume 14, Issue 3 , Summer 2017, Pages 31-40

  In this study adsorption of Cr(VI) from aqueous solution by Fe3O4 nanoparticles was investigated. Desorption process and recovery of nanoparticles using different solutions were then carried out, and it was observed that NaOH (0.5M) can remove 90% of adsorbed chromium ions. Following the completion of ...  Read More

Full article Polymer Engineering and Technology,
4. Stability and Rheological Behavior of Sulfonated Polyacrylamide/ Laponite Nanoparticles Dispersions in Electrolyte Media

R. Foruzanfar; j. aalaie; H. Hamidian; M. Dehestani

Volume 14, Issue 3 , Summer 2017, Pages 41-54

  Due to the importance of nanoparticles stability in industrial applications, in this research, stability of laponite nanoparticles dispersions containing different concentrations of sodium sulfonated polyacrylamide (SPA) was investigated in electrolyte media for oil reservoirs applications. In this regard, ...  Read More

Full article Modeling and Simulation
5. investigation of mercaptan removal from Kerosene using passive mixing tools: Experimental study and CFD modeling

A. Parvareh; . Parvizi

Volume 14, Issue 3 , Summer 2017, Pages 55-64

  Abstract In this work, the role of appropriate mixing for mercaptan removal from Kerosene using caustic soda has been investigated in the pilot scale. Static mixer at different condition has been used as a passive mixing tool to achieve proper mixing and consequently high performance of mercaptan removal. ...  Read More

Full article Separation Technology,
6. Methanol crossover and selectivity of nafion/heteropolyacid/montmorillonite nanocomposite proton exchange membranes for DMFC applications

M. Azimi; S.J. Peighambardoust

Volume 14, Issue 3 , Summer 2017, Pages 65-81

  In this work, we prepared the nafion/montmorillonite/heteropolyacid nanocomposite membranes for direct methanol fuel cells (DMFCs). The analyses such as X-ray diffraction (XRD), Fourier transform infrared (FTIR), and scanning electron microscopy (SEM) were conducted to characterize the filler dispersion ...  Read More

Full article Separation Technology,
7. Stochastic Comparisons of Probability Distribution Functions with Experimental Data in a Liquid-Liquid Extraction Column for Determination of Drop Size Distributions

Sh. Houshyar; M. Torab-Mostaedi; S. M. A. Moosavian; Seyed Hamed Mousavi; M. Asadollahzadeh

Volume 14, Issue 3 , Summer 2017, Pages 82-95

  The droplet size distribution in the column is usually represented as the average volume to surface area, known as the Sauter mean drop diameter. It is a key variable in the extraction column design. A study of the drop size distribution and Sauter-mean drop diameter for a liquid-liquid extraction column ...  Read More