Iranian Association of Chemical Engineering (IAChE) Iranian Journal of Chemical Engineering (IJChE) 1735-5397 11 2 2014 04 01 Reduction of Parasitic Currents in Simulation of Droplet Secondary Breakup with Density Ratio Higher than 60 by InterDyMFoam 29 42 10201 EN S. Tavangar CFD Research Laboratory, School of Chemical Engineering, Iran University of Science And Technology, Tehran, Iran S.H. Hashemabadi CFD Research Laboratory, School of Chemical Engineering, Iran University of Science And Technology, Tehran, Iran A. Saberimoghadam CFD Research Laboratory, School of Chemical Engineering, Iran University of Science And Technology, Tehran, Iran Journal Article 2015 07 27 Secondary breakup of Newtonian droplet into continuous air jet was numerically studied. A coupled Large Eddy Simulation (LES)/ Volume of Fluid (VOF) technique was used in this investigation. Dynamic adaptive mesh was also employed. To this end, the open source CFD package, OpenFOAM, was used to perform the numerical study and was modified to meet the needs of the problem. In order to reduce the error, resulting from the spurious currents, Laplacian smoothing filter was used, which transforms the volume fraction into a smoother volume fraction. This filtering process also helped to obtain a sharp fluid interface. The smoothing has qualitatively and quantitatively improved the simulation results in bag breakup regime. Comparing the results of the RNG k-ε turbulence model and LES model showed the great influence of LES model to improve results. The detailed physics of two different breakup regimes, i.e. bag and multimode (streamer) were investigated. The numerical drop breakup regimes showed appropriate agreement with experimental observation. According to the analogy between the secondary and primary atomization, the outcomes can be used for development of the atomization models. https://www.ijche.com/article_10201_7fd3b80fb1884e2927df46a7139bb8bf.pdf