Iranian Journal of Chemical Engineering (IJChE)

Abstract At this work, removal of Pb (II) using Lawsonia inermis (Henna) was studied. In recent years, use of low price adsorbent is taken into consideration. Adsorption experiments were performed in batch system at ambient temperature (25℃). The influence of some parameters such as time, initial metal concentration, pH and adsorbent dose were investigated. The optimum conditions was obtained at pH of 6, 10 ppm of initial metal concentration, 80 min of contact time and 0.75 g/L of adsorbent dose. To study the adsorbent morphology, Scanning Electron Microscope (SEM) and Fourier transform infrared spectroscopy (FTIR) was used before and after adsorption of Pb (II) ions. Sorption of Pb (II) was evaluated by Freundlich and Langmuir isotherms. The results indicate that the Freundlich isotherm model is better described the adsorption of Pb (II) than Langmuir isotherm model. Also, it is observed that, the pseudo-second-order kinetic model well fitted to experimental data .

Abstract In this study, the Langmuir adsorption isotherm has been coupled with activity coefficient models for prediction of surface tension of single and mixed electrolyte solutions. Various activity models such as Meissner, Pitzer and extended UNIQUAC have been used and coupled with Langmuir adsorption isotherm. The model parameters were determined through mathematical optimization using experimental surface tension data of single electrolyte solutions. Absolute average deviation was used as objective function in optimization procedure. The results showed that in the case of single
electrolyte solutions different activity coefficient models have similar capability while in the case of mixed electrolyte solutions, extended UNIQUAC model gives better results.