Chemical Cleaning of Utafiltration Membrane after Treatment of Oily Wastewater

Salahi, A.; Mohammadi, T.; Abbasi, M.; Rekabdar, F.

Chemical Cleaning of Utafiltration Membrane after Treatment of Oily Wastewater

Document Type : Full article

Authors

A. Salahi ¹

T. Mohammadi ¹

M. Abbasi ¹

F. Rekabdar ²

¹ Research Centre for Membrane Separation Processes (RCMSP), Faculty of Chemical Engineering Iran University of Science and Technology (IUST), Narmak, Tehran, Iran

² Polymer Science and Technology Division, Research Institute of Petroleum Industry (RIPI), West Blvd., Near Azadi Sports Complex, Tehran, Iran

Abstract

Oily wastewaters and Oil–in-water emulsions are two of the major pollutants of the environment. Ultrafiltration (UF) membranes play an important role in the treatment and reuse of oily wastewaters. Fouling of UF membranes is typically caused by inorganic and organic materials present in wastewaters that adhere to the surface and pores of the membrane and result in the deterioration of performance with a consequent increase in energy costs and membrane replacement. In the experiments, polyacrylonitrile (PAN) and outlet wastewater of the API (American Petroleum Institute) separator unit of Tehran refinery as membrane and feed were used, respectively. Fouling and cleaning experiments were performed with oily wastewater and selected cleaning agents using a laboratory scale cross flow test unit. The results showed that metal chelating agent (ethylene diamine tetra acetic acid disodium salt-2-hydrate (EDTA)) and an anionic surfactant (sodium dodecyl sulfate (SDS)) were able to clean the fouled UF membrane effectively by optimizing chemical (pH) and physical (cleaning time, cross flow velocity (CFV) and temperature) conditions during cleaning. Flux recovery and resistance removal were found to improve with increasing CFV, temperature, pH, cleaning time and concentration of the cleaning chemicals. In this paper, the cleaning mechanism is also investigated.

Keywords

Oily Wastewater

Cleaning

Ultrafiltration

Fouling