[1] Tarodiya R, Gandhi B.K (2017) Hydraulic performance and erosive wear of centrifugal slurry pumps – A review. Powder Technol 305:27–38.
[2] Chandrasekaran M, Santhanam V, Venkateshwaran N (2021) Impeller design and CFD analysis of fluid flow in rotodynamic pumps. Mater Today Proc 37:2153–2157. https://doi.org/10.1016/j.matpr.2020.07.637
[3] Mohammadi Z, Heidari F, Fasamanesh M, Saghafian A, Amini F, Jafari S (2023) Centrifugal pumps. pp. 155–200.
[4] Pagalthivarthi K.V, Gupta P.K, Tyagi V, Ravi M.R (2011) CFD prediction of erosion wear in centrifugal slurry pumps for dilute slurry flows. J Comput Multiph Flow 3(4):225–246. https://doi.org/10.1260/1757-482X.3.4.225
[5] Lin Z, Hu L, Tao J, Zhu X, Zhou C, Li Y (2025) Analysis of high-concentration solid–liquid flow and erosion characteristics of centrifugal pump based on CFD–DEM. Chem Eng Sci 317:122106. https://doi.org/10.1016/j.ces.2025.122106
[6] Bandi S, Banka J, Kumar A, Rai A.K (2023) Effects of sediment properties on abrasive erosion of a centrifugal pump. Chem Eng Sci 277:118873. https://doi.org/10.1016/j.ces.2023.118873
[7] Kang C, Cao Q, Teng S, Liu H, Ding K (2024) Wear characteristics of a centrifugal pump transporting solid–liquid mixture: An experimental and numerical study. Ain Shams Eng J 15(1):102277. https://doi.org/10.1016/j.asej.2023.102277
[8] Wang K, Liu H, Wang L, Guo P, Wang Y, Yang J (2024) Effect of particle size on vortex structure and erosion behavior of semi-open centrifugal pump. Energy 293:130576. https://doi.org/10.1016/j.energy.2024.130576
[9] Yasser E, Zhou L, El-Emam M.A (2025) Failure mechanism analysis of erosion in centrifugal pumps attributed to particle morphology: A coupled CFD–DEM–ANN approach. Eng Fail Anal 181:109957. https://doi.org/10.1016/j.engfailanal.2025.109957
[10] Zhao R-J, Zhang Y-L, Zhang D-S, Li Y, Geng L-L (2021) Numerical investigation of the characteristics of erosion in a centrifugal pump for transporting dilute particle-laden flows (Case 21). J Mar Sci Eng 9(9):961. https://doi.org/10.3390/jmse9090961
[11] Wang H, Tan Z, Kuang S, Yu A (2022) Numerical modeling and analysis of particle–fluid flow and wall erosion in centrifugal slurry pumps under different solid concentrations. Powder Technol 410:117861.
[12] Wang Y, Wang X, Chen J, Li G, Liu H, Xiong W (2022) An experimental insight into dynamic characteristics and wear of centrifugal pump handling multi-size particulate slurry. Eng Fail Anal 138:106303. https://doi.org/10.1016/j.engfailanal.2022.106303
[13] Qian Z, Su J, Guo Z, Yang B, Dong J (2021) Experimental investigation of sediment erosion in a double-suction centrifugal pump in sandy rivers. IOP Conf Ser Earth Environ Sci 774(1):012049. https://doi.org/10.1088/1755-1315/774/1/012049
[14] Wang Y, Li W, He T, Liu H, Han C, Zhu Z (2022) Experimental study on the influence of particle diameter, mass concentration, and impeller material on the wear performance of solid–liquid two-phase centrifugal pump blade. Front Energy Res 10:893385. https://doi.org/10.3389/fenrg.2022.893385
[15] Yang S, Fan J, Zhang L, Sun B (2021) Performance prediction of erosion in elbows for slurry flow under high internal pressure. Tribol Int 157:106879. https://doi.org/10.1016/j.triboint.2021.106879
[16] Abduljabbar A, Mohyaldinn M, Taha O, Alghurabi A, Alakbari F (2022) Erosion of sand screens by solid particles: a review of experimental investigations. J Pet Explor Prod Technol 12. https://doi.org/10.1007/s13202-022-01467-4
[17] Xiao Y, et al. (2019) Slurry flow and erosion prediction in a centrifugal pump after long-term operation. Energies 12(8):1523. https://doi.org/10.3390/en12081523
[18] Jalalvandi K, Parvareh A (2023) Prediction of erosion rate in gas–solid flow using computational fluid dynamics (CFD): focus on geometrical parameters. Iran J Chem Eng 20(2):33–49. https://doi.org/10.22034/ijche.2023.402980.1495
[19] Nemati B, Vaghefi M, Behroozi A.M (2024) Numerical investigation of the erosion reduction in elbows using separate and helical inner ring. Results Eng 23:102499. https://doi.org/10.1016/j.rineng.2024.102499
[20] Finnie I (1960) An experimental study of erosion. Proc Soc Exp Stress Anal 17(2):65.
[21] Oka Y.I, Okamura K, Yoshida T (2005) Practical estimation of erosion damage caused by solid particle impact Part 1: Effects of impact parameters on a predictive equation. Wear 259:95–101. https://doi.org/10.1016/j.wear.2005.01.039
[22] Yang S, Zhang M, Wang X, Wang H (2020) Numerical simulation of fluid carrying pollutant particles erosion in elbow pipe carried out by COMSOL. J Phys Conf Ser 1626(1):012109. https://doi.org/10.1088/1742-6596/1626/1/012109
[23] Song X, et al. (2021) Numerical prediction of erosion based on the solid–liquid two-phase flow in a double-suction centrifugal pump. J Mar Sci Eng 9(8):836. https://doi.org/10.3390/jmse9080836
[24] Zhao R-J, Zhang Y-L, Zhang D-S, Li Y, Geng L-L (2021) Numerical investigation of the characteristics of erosion in a centrifugal pump for transporting dilute particle-laden flows (Case 31). J Mar Sci Eng 9(9):961. https://doi.org/10.3390/jmse9090961
[25] Pan J, et al. (2025) Study on the long-term sediment abrasion characteristics of turbines considering geometric gradients. Wear 206318. https://doi.org/10.1016/j.wear.2025.206318
[26] Veritas D.N (1996) Erosive wear in piping systems – recommended practice RP O501. Det Nor Verit.
[27] Homicz G.F (2004) Computational fluid dynamic simulations of pipe elbow flow. Sandia Natl Lab, Albuquerque, NM and Livermore, CA.
[28] Hanon K.H, Ebrahimi E (2023) Numerical study of the fluid flow and erosion–corrosion in an industrial valve. Iran J Chem Eng 20(1):3–21. https://doi.org/10.22034/ijche.2023.375055.1466.
