[1] Akbari A, Salehibai SY (2025) Impact of Cs and Ni promotion on attrition resistance and catalytic performance of formulated spray-dried SAPO-34 in fluidized-bed MTO conversion. Powder Technology 465:121316. https://doi.org/10.1016/j.powtec.2025.121316
[2] Chen L, Yao W, Chen X, Yang G (2025) Rapid preparation of SAPO-34/ZSM-5 composite molecular sieves modified by Cu–Ce and study on its catalytic performance of MTO. Journal of Solid State Chemistry 348:125408. https://doi.org/10.1016/j.jssc.2025.125408
[3] Mortazavi-Manesh A (2025) Methanol to Olefins (MTO): Catalysts, Kinetics, Mechanisms, and Reaction Paths. In: Rahimpour MR (ed). Comprehensive Methanol Science, 1rd ed. Oxford: Elsevier p. 412-25.
https://ouci.dntb.gov.ua/en/works/4kzAq1K7/
[4] Wu J, Dai M, Yang B, Li P, Wang C, Wu G, et al (2024) The effect of hierarchical pore structure SAPO-34 catalyst on the diffusion and reaction behavior in MTO reaction. Chemical Engineering Journal 482:148947. https://doi.org/10.1016/j.cej.2024.148947
[5] Liu Z, Wang Q, Liu S, Yang M, Fan D, Zhu D, et al (2023) Synthesis of SAPO-34 by utilizing spent industrial MTO catalyst and their catalytic applications. Materials Today Sustainability 21:100302. https://doi.org/10.1016/j.mtsust.2022.100302
[6] Sadeghpour P, Haghighi M (2018) Incorporation of mono and bimetallic MnNi into SAPO-34 framework used in conversion of methanol to ethylene and propylene: Alteration of acidic properties and catalytic performance. Asia-Pacific Journal of Chemical Engineering 13(1):e2163. https://doi.org/10.1002/apj.2163
[7] Zuo Y, Zhang Y, Ren Q, Xu Y, Luo Y, Shu X (2022) A strategy combining the catalytic cracking of C6-C8 olefins and methanol to olefins (MTO) reaction through SAPO-34 pre-coking. Catalysis Communications 168:106461. https://doi.org/10.1016/j.catcom.2022.106461
[8] Ebrahimi A, Haghighi M, Aghamohammadi S (2020) Effect of calcination temperature and composition on the spray-dried microencapsulated nanostructured SAPO-34 with kaolin for methanol conversion to ethylene and propylene in fluidized bed reactor. Microporous and Mesoporous Materials 297:110046. https://doi.org/10.1016/j.micromeso.2020.110046
[9] Sadeghpour P, Haghighi M (2015) DEA/TEAOH templated synthesis and characterization of nanostructured NiAPSO-34 particles: Effect of single and mixed templates on catalyst properties and performance in the methanol to olefin reaction. Particuology 19:69-81. https://doi.org/10.1016/j.partic.2014.04.012
[10] Zergani N, Sari A (2021) Modeling and simulation analysis of methanol conversion to olefins (MTO): A critical comparison of a honeycomb monolith and a fixed-bed of cylindrical extruded HZSM-5 catalyst. Chemical Engineering and Processing - Process Intensification 167:108537. https://doi.org/10.1016/j.cep.2021.108537
[11] Akhgar S, Towfighi J, Hamidzadeh M (2020) MTO performance over seed-assisted SAPO-34 zeolites synthesized by reducing template consumption. Journal of Materials Research and Technology 9(6):12126-36. https://doi.org/10.1016/j.jmrt.2020.08.067
[12] Sadeghpour P, Haghighi M (2015) Effect of Mn and Ni Concentration on Synthesis of Nanostructured MnNiAPSO-34 Catalyst Used in Conversion of Methanol to Light Olefins. Nashrieh Shimi va Mohandesi Shimi Iran 34(1):11-27.
https://www.nsmsi.ir/article_14490.html?lang=en
[13] Wang Y, Gao J, Dong L, Wang Y, Hong M, Yang S (2021) Tuning SAPO-34 with a tailor-designed zwitterionic amino acid for improved MTO performance. Microporous and Mesoporous Materials 310:110590. https://doi.org/10.1016/j.micromeso.2020.110590
[14] Zhong J, Han J, Wei Y, Liu Z (2021) Catalysts and shape selective catalysis in the methanol-to-olefin (MTO) reaction. Journal of Catalysis 396:23-31. https://doi.org/10.1016/j.jcat.2021.01.027
[15] Dai W, Liu Z, Zhao J, Wang Y, Zheng J, Li R (2025) Facile fabrication of hierarchical SAPO-34 zeolite with enhanced MTO catalytic performance. Microporous and Mesoporous Materials 392:113647. https://doi.org/10.1016/j.micromeso.2025.113647
[16] Eslami AA, Haghighi M, Sadeghpour (2017) PShort time microwave/seed-assisted synthesis and physicochemical characterization of nanostructured MnAPSO-34 catalyst used in methanol conversion to light olefins. Powder Technology. 310:187-200. https://doi.org/10.1016/j.powtec.2017.01.017
[17] Mahdavi Fard A, Askari S, Afshar Ebrahimi A, Heydarinasab A (2022) Green synthesis of SAPO-34 molecular sieve using rice husk ash as a silica source: Evaluation of synthesis and catalytic performance parameters in methanol-to-olefin reaction. Microporous and Mesoporous Materials 341:112037. https://doi.org/10.1016/j.micromeso.2022.112037
[18] Mohammadkhani B, Haghighi M, Sadeghpour P (2016) Altering C2H4/C3H6 yield in methanol to light olefins over HZSM-5, SAPO-34 and SAPO-34/HZSM-5 nanostructured catalysts: influence of Si/Al ratio and composite formation. RSC Advances 6(30):25460-71.
https://doi.org/10.1039/C6RA00432F
[19] Zou X, Fan D, Zhang X, Lou C, Yang M, Xu S, et al (2024) A rapid and eco-friendly approach for the synthesis of low-silica SAPO-34 with excellent MTO catalytic performance. Chemical Communications. 60(36):4805-9. https://doi.org/10.1039/d4cc01017e
[20] Hu J, Jiang H, Guo Y, Liu J, Xu D, Wu G, et al (2025) Efficient synthesis of smaller crystal ZSM-5 zeolite in low TPAOH-to-silica ratio dry-gel hydrothermal system. Microporous and Mesoporous Materials 390:113596. https://doi.org/10.1016/j.micromeso.2025.113596
[21] Sadeghpour P, Haghighi M, Ghasemian N, Ebrahimi A (2023) DeNOx Behavior of Mn–Ni–Co Doped APSO-34 Nanostructured Catalyst Synthesized via Ultrasound Assisted One-Pot Hydrothermal Method. Theoretical Foundations of Chemical Engineering 57(1):S18-S35. https://doi.org/10.1134/S0040579523070138
[22] Sadeghpour P, Haghighi M (2018) High-temperature and short-time hydrothermal fabrication of nanostructured ZSM-5 catalyst with suitable pore geometry and strong intrinsic acidity used in methanol to light olefins conversion. Advanced Powder Technology 29(5):1175-88. https://doi.org/10.1016/j.apt.2018.02.009
[23] Aghaei E, Haghighi M (2015) Effect of crystallization time on properties and catalytic performance of nanostructured SAPO-34 molecular sieve synthesized at high temperatures for conversion of methanol to light olefins. Powder Technology 269:358-70. https://doi.org/10.1016/j.powtec.2014.09.036
[24] Hou J, Zhong C, Yin C, Wang R, Wang L, Ke M, et al E (2024) ffect of various templates-assisted Cu ion incorporation into SAPO-34 on low-temperature hydrothermal durability for NH3-SCR reaction. Fuel 369:131717. https://doi.org/10.1016/j.fuel.2024.131717
[25] Li S, Falconer JL, Noble RD (2008) SAPO-34 membranes for CO2/CH4 separations: Effect of Si/Al ratio. Microporous and Mesoporous Materials 110(2):310-7. https://doi.org/10.1016/j.micromeso.2007.06.016
[26] Gianotti E, Brito JCFP, Miletto I, Marchese L (2022) Rational design of hierarchical porous Cu/SAPO-34 obtained with sustainable templates. Microporous and Mesoporous Materials 346:112310. https://doi.org/10.1016/j.micromeso.2022.112310
[27] Zhang Q, Zhou Z, Chen Y, Li J, Kang H (2023) Rapid synthesis of SAPO-34 molecular sieve with cheap template for improving MTO performance. Catalysis Communications 106751. https://doi.org/10.1016/j.catcom.2023.106751[28] Zhong J, Han J, Wei Y, Xu S, Sun T, Guo X, et al (2019) The template-assisted zinc ion incorporation in SAPO-34 and the enhanced ethylene selectivity in MTO reaction. Journal of Energy Chemistry 32:174-81. https://doi.org/10.1016/j.jechem.2018.07.017
[29] Aghamohammadi S, Haghighi M, Sadeghpour P, Souri T (2021) Comparative Synthesis and Characterization of Nanostructured SAPO-34 Using TEA and Morpholine: Effect of Mono vs. Dual Template on Catalytic Properties and Performance toward Methanol to Light Olefins. Combinatorial Chemistry & High Throughput Screening 24(4):509-20. 10.2174/1386207323666200914104904
[30] Salmasi M, Fatemi S, Hashemi SJ (2012) MTO reaction over SAPO-34 catalysts synthesized by combination of TEAOH and morpholine templates and different silica sources. Scientia Iranica 19(6):1632-7. https://doi.org/10.1016/j.scient.2012.04.019
[31] Zhang D, Zhou Y, Chu R, Wu J, Wu G, Li X, et al (2023) Research on double template agents to regulate the grain growth behavior of SAPO-34. Microporous and Mesoporous Materials 349:112428. https://doi.org/10.1016/j.micromeso.2022.112428
[32] Jiao W, Su J, Zhou H, Liu S, Liu C, Zhang L, et al (2020) Dual template synthesis of SAPO-18/34 zeolite intergrowths and their performances in direct conversion of syngas to olefins. Microporous and Mesoporous Materials 306:110444. https://doi.org/10.1016/j.micromeso.2020.110444
[33] Ghavipour M, Al Hussami R, Levin K, Roy R, Kopyscinski J (2023) SAPO-34 Catalyst: Synthesis Optimization by Template Alteration and In Situ Coke Evolution Analysis in Methanol Conversion to Light Olefins. Industrial & Engineering Chemistry Research 62(44):18362-78.
https://doi.org/10.1021/acs.iecr.3c02543
[34] Athayde DD, dos Santos GM, de Faria ACB, de Lima Ribeiro C, Aiube CM, Ladislau DAA, et al (2025) Investigation of the reaction time and hydrothermal synthesis route on the SSZ-13 zeolite particle crystallization and CO2 adsorption. Microporous and Mesoporous Materials 384:113428. https://doi.org/10.1016/j.micromeso.2024.113428
35. Liu J, Pan X, Guo Y, Zou Z, Wang Z, Yu H (2024) Crystallization mechanism and physical properties of xonotlite intensified by inorganic and organic additives based on direct hydrothermal synthesis. Journal of Non-Crystalline Solids 640:123121. https://doi.org/10.1016/j.jnoncrysol.2024.123121
[36] Sadeghpour P, Haghighi M (2022) Three-step short-time temperature-programmed hydrothermal synthesis of ZSM-5 with high durability for conversion of methanol to propylene. Korean Journal of Chemical Engineering 39(5):1194-206.
https://doi.org/10.1007/s11814-022-1077-4 [37] Aghaei E, Haghighi M (2014) Enhancement of catalytic lifetime of nanostructured SAPO-34 in conversion of biomethanol to light olefins. Microporous and Mesoporous Materials 196:179-90. https://doi.org/10.1016/j.micromeso.2014.05.011
[38] Kianfar E (2021) Investigation of the Effect of Crystallization Temperature and Time in Synthesis of SAPO-34 Catalyst for the Production of Light Olefins. Petroleum Chemistry 61(4):527-37. https://doi.org/10.1134/S0965544121050030
[39] Abbasi A, Darian JT, Bazghaleh FS, Yazd MS (2025) Boosting SAPO-34 catalyst longevity and activity in MTO processes via indium oxide doping: an experimental and theoretical study. Reaction Chemistry & Engineering 10: 2412-2423.
DOI https://doi.org/10.1039/D5RE00183H [40] Wu L, Liu Z, Qiu M, Yang C, Xia L, Liu X, et al (2014) Morphology control of SAPO-34 by microwave synthesis and their performance in the methanol to olefins reaction. Reaction Kinetics, Mechanisms and Catalysis 111(1):319-34.
https://doi.org/10.1007/s11144-013-0639-1 [41] Salmasi M, Fatemi S, Taheri Najafabadi A (2011) Improvement of light olefins selectivity and catalyst lifetime in MTO reaction; using Ni and Mg-modified SAPO-34 synthesized by combination of two templates. Journal of Industrial and Engineering Chemistry 17(4):755-61. https://doi.org/10.1016/j.jiec.2011.05.031
[42] Wang P, Lv A, Hu J, Xu Ja, Lu G (2012) The synthesis of SAPO-34 with mixed template and its catalytic performance for methanol to olefins reaction. Microporous and Mesoporous Materials 152:178-84. https://doi.org/10.1016/j.micromeso.2011.11.037
[43] Izadbakhsh A, Farhadi F, Khorasheh F, Sahebdelfar S, Asadi M, Feng YZ (2009) Effect of SAPO-34's composition on its physico-chemical properties and deactivation in MTO process. Applied Catalysis A: General 364(1):48-56. https://doi.org/10.1016/j.apcata.2009.05.022
[44] Aghamohammadi S, Haghighi M, Charghand M (2014) Methanol conversion to light olefins over nanostructured CeAPSO-34 catalyst: Thermodynamic analysis of overall reactions and effect of template type on catalytic properties and performance. Materials Research Bulletin 50:462-75. https://doi.org/10.1016/j.materresbull.2013.11.014
[45] Cui Y, Zhang Q, He J, Wang Y, Wei F (2013) Pore-structure-mediated hierarchical SAPO-34: Facile synthesis, tunable nanostructure, and catalysis applications for the conversion of dimethyl ether into olefins. Particuology1(4):468-74. https://doi.org/10.1016/j.partic.2012.12.009
[46] Alwahabi SM, Froment GF (2004) Single Event Kinetic Modeling of the Methanol-to-Olefins Process on SAPO-34. Industrial & Engineering Chemistry Research 43(17):5098-111.
https://doi.org/10.1021/ie040041u
[47] Wang Q, Wang L, Wang H, Li Z, Zhang X, Zhang S, et al (2011) Effect of SiO2/Al2O3 ratio on the conversion of methanol to olefins over molecular sieve catalysts. Frontiers of Chemical Science and Engineering 5(1):79-88. https://doi.org/10.1007/s11705-010-0550-6
