Carboxymethyl cellulose incorporated polyethersulfone-based nanofiltration membranes: tailoring the membrane characteristics for water treatment

Document Type : Regular Article

Authors

Department of Chemical Engineering, Faculty of Engineering, Arak University, Arak, Iran

10.22034/ijche.2026.592830.1605
Abstract
To address the critical challenge of water purification, this study focuses on enhancing polyethersulfone (PES) nanofiltration (NF) membranes through the incorporation of carboxymethyl cellulose (CMC) into membrane body. The composite membranes were synthesized via the phase inversion technique, utilizing a casting solution composed of dimethylacetamide (DMAc) as the solvent and polyvinylpyrrolidone (PPVP) as a pore-forming agent. A comprehensive suite of characterizations-including FTIR, XRD, AFM, and FESEM-was employed to investigate the physicochemical and morphological properties. Performance was evaluated based on permeation flux, water content, heavy metal and salt rejection, and anti-fouling capabilities. The inclusion of CMC significantly enhanced surface hydrophilicity, evidenced by a marked reduction in the water contact angle for all modified membranes compared to the pristine PES. FESEM analysis confirmed structural alterations, revealing the formation of wider internal pores and consequently, an increase in overall porosity with higher CMC content. Optimal performance was achieved by the membrane containing 0.1 wt% CMC, which demonstrated a superior permeation flux over the neat membrane and reached a maximum 88%-Na2SO4 and 75%-CrSO4 rejections. Crucially, fouling tests affirmed that this membrane possessed the highest flux recovery ratio, a direct result of its improved hydrophilic character, highlighting its robustness for sustainable water treatment applications.

Keywords

Subjects


Articles in Press, Accepted Manuscript
Available Online from 18 November 2026