Environmental Engineering Research Center (EERC), Faculty of Chemical Engineering, Sahand University of Technology, Sahand New Town, Tabriz, Iran
Abstract
In this study, CuO/CeO 2 Nano-catalyst was successfully prepared by impregnation-ultrasound assisted methods and used for selective oxidation. This catalyst has been characterized by means of XRD, BET, FTIR and SEM. The results show that CuO/CeO2 is nanosized (rSEM < 100 nm) and BET surface area of tested materials was in the range of 45–76 m 2/g. CuO is the active phase for selective CO oxidation, even operating at a gas hourly space velocity as high as 30000 h -1 . The catalysts CuO/CeO 2 exhibit the CO conversion 100% in the wide temperature range of 100–120 °C, and with the CO oxidation selectivity greater than 86% at 100 ◦C.
Karim,A , Fatehifar,E and Alizadeh,R . (2013). Synthesis and Characterization of Nanostructured CuO/CeO2 Catalysts via Ultrasound Assisted Techniques used for Selective Oxidation of CO. Iranian Journal of Chemical Engineering (IJChE), 10(3), 51-59.
MLA
Karim,A , , Fatehifar,E , and Alizadeh,R . "Synthesis and Characterization of Nanostructured CuO/CeO2 Catalysts via Ultrasound Assisted Techniques used for Selective Oxidation of CO", Iranian Journal of Chemical Engineering (IJChE), 10, 3, 2013, 51-59.
HARVARD
Karim A, Fatehifar E, Alizadeh R. (2013). 'Synthesis and Characterization of Nanostructured CuO/CeO2 Catalysts via Ultrasound Assisted Techniques used for Selective Oxidation of CO', Iranian Journal of Chemical Engineering (IJChE), 10(3), pp. 51-59.
CHICAGO
A Karim, E Fatehifar and R Alizadeh, "Synthesis and Characterization of Nanostructured CuO/CeO2 Catalysts via Ultrasound Assisted Techniques used for Selective Oxidation of CO," Iranian Journal of Chemical Engineering (IJChE), 10 3 (2013): 51-59,
VANCOUVER
Karim A, Fatehifar E, Alizadeh R. Synthesis and Characterization of Nanostructured CuO/CeO2 Catalysts via Ultrasound Assisted Techniques used for Selective Oxidation of CO. IJChE. 2013;10(3):51-59.