Abedin, H. Study of Light Wavelength Dependency in Red-Orange Spectrum on Continuous Culture of Synechocystis sp. PCC6803 [Volume 16, Issue 4, 2019, Pages 3-11]
Abedini, H. Reactor modeling and kinetic parameters estimation for diethylbenzene (DEB) dehydrogenation reactions [Volume 16, Issue 3, 2019, Pages 23-36]
Abedzadegan, T. Comparison of Different Methods (Digestion, Combustion, Gasification and Pyrolysis) for Sludge Energy Recovery: A Case Study for Ekbatan’s Municipal Treatment Plant [Volume 16, Issue 1, 2019, Pages 70-83]
Abidemi, G. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]
Aghamiri, F. Effect of MgAl2O4 catalyst support synthesis method on the catalytic activity of nickel Nano catalyst in reverse water gas shift reaction [Volume 16, Issue 3, 2019, Pages 58-69]
Arinkoola, A. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]
Arjomandi, H. Experimental, Kinetics and Isotherm Modeling of Carbon Dioxide Adsorption with 13X Zeolite in a fixed bed column [Volume 16, Issue 1, 2019, Pages 54-64]
Asadollahi, M. Two Phase Flow Pressure Drop Calculation Using Homogeneous Equilibrium Model [Volume 16, Issue 3, 2019, Pages 84-92]
Atitebi, Z. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]
Azami, H. Biofouling Behavior on Forward Osmosis Using Vertically Aligned CNT Membrane on Alumina [Volume 16, Issue 2, 2019, Pages 1-13]
Azimi, N. Cooling Enhancement of a Photovoltaic Panel Through Ferrofluid Stimulation Using a Magnetic-Wind Turbine [Volume 16, Issue 4, 2019, Pages 35-52]
B
Bahoosh, M. Comparison the performance of different reverse osmosis membrane modules by CFD modeling [Volume 16, Issue 1, 2019, Pages 101-116]
Beigzadeh, R. The CFD Provides Data for Adaptive Neuro-Fuzzy to Model the Heat Transfer in Flat and Discontinuous Fins [Volume 16, Issue 2, 2019, Pages 57-69]
Beigzadeh, R. Computational fluid dynamics study and GA modeling approach of the bend angle effect on thermal-hydraulic characteristics in zigzag channels [Volume 16, Issue 3, 2019, Pages 70-83]
E
Ebadi Amooghin, A. Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]
Esmaeilzadeh-Dilmaghani, S. Synthesis and Characterization of Waterglass-Based Silica Aerogel Under Heat Treatment for Adsorption of Nitrate from Water: Batch and Column Studies [Volume 16, Issue 4, 2019, Pages 53-72]
Etebarian, M. Prediction of true critical temperature and pressure of binary hydrocarbon mixtures: A Comparison between the artificial neural networks and the support vector machine [Volume 16, Issue 2, 2019, Pages 14-40]
F
Fadhil, S. Modeling of Nanofiltration of Low Concentration Pb(II) Aqueous Solutions Using a Coupled Concentration Polarization and Pore Flow Model [Volume 16, Issue 4, 2019, Pages 12-22]
Fauzi Ismail, A. Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]
G
Ghadi, A. CFD Study of Concave Turbine [Volume 16, Issue 2, 2019, Pages 103-118]
Ghaemi, A. Experimental, Kinetics and Isotherm Modeling of Carbon Dioxide Adsorption with 13X Zeolite in a fixed bed column [Volume 16, Issue 1, 2019, Pages 54-64]
Ghaheri, L. Biofouling Behavior on Forward Osmosis Using Vertically Aligned CNT Membrane on Alumina [Volume 16, Issue 2, 2019, Pages 1-13]
H
Hazrati, H. Fe3O4 Magnetic Nanoparticles/ Graphene Oxide Nanosheets/Carbon Cloth as an Electrochemical Sensing Platform [Volume 16, Issue 2, 2019, Pages 95-102]
Heidari, N. Cooling Enhancement of a Photovoltaic Panel Through Ferrofluid Stimulation Using a Magnetic-Wind Turbine [Volume 16, Issue 4, 2019, Pages 35-52]
Hemmati, A. Comparison of Different Methods (Digestion, Combustion, Gasification and Pyrolysis) for Sludge Energy Recovery: A Case Study for Ekbatan’s Municipal Treatment Plant [Volume 16, Issue 1, 2019, Pages 70-83]
I
Irankhah, A. Effect of MgAl2O4 catalyst support synthesis method on the catalytic activity of nickel Nano catalyst in reverse water gas shift reaction [Volume 16, Issue 3, 2019, Pages 58-69]
Irankhah, A. CFD Simulation of Methane Steam Micro-Reformer: Channel Design and Inlet/Outlet Configuration [Volume 16, Issue 4, 2019, Pages 23-35]
J
Jabbari, A.M. Fe3O4 Magnetic Nanoparticles/ Graphene Oxide Nanosheets/Carbon Cloth as an Electrochemical Sensing Platform [Volume 16, Issue 2, 2019, Pages 95-102]
Jimoh, M. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]
K
Kargari, A. Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]
Kashi, E. Comparison the performance of different reverse osmosis membrane modules by CFD modeling [Volume 16, Issue 1, 2019, Pages 101-116]
Khadiv-Parsi, P. Preparation and Drug-Delivery Properties of Metal-Organic Framework HKUST-1 [Volume 16, Issue 4, 2019, Pages 73-80]
Khajeh Amiri, M. Experimental, Kinetics and Isotherm Modeling of Carbon Dioxide Adsorption with 13X Zeolite in a fixed bed column [Volume 16, Issue 1, 2019, Pages 54-64]
M
Mirfendereski, S. M. Synthesis of zeolite NaA nano-crystalls; effect of synthesis parameters on crystallinity and crystal size [Volume 16, Issue 1, 2019, Pages 22-38]
Moghaddas, J. Study on diffusion coefficient of benzene and ethyl benzene vapours in nanoporous silica aerogel and silica aerogel-activated carbon composites [Volume 16, Issue 1, 2019, Pages 1-21]
Moghaddas, J. Experimental and Computational Study on Hydrodynamic of a Downscaled Mini Vessel USP Dissolution Test Apparatus II [Volume 16, Issue 3, 2019, Pages 3-22]
Moghaddas, J.S. Synthesis and Characterization of Waterglass-Based Silica Aerogel Under Heat Treatment for Adsorption of Nitrate from Water: Batch and Column Studies [Volume 16, Issue 4, 2019, Pages 53-72]
Mohammadi, A. Study on diffusion coefficient of benzene and ethyl benzene vapours in nanoporous silica aerogel and silica aerogel-activated carbon composites [Volume 16, Issue 1, 2019, Pages 1-21]
Mohammadi, A. Experimental and Computational Study on Hydrodynamic of a Downscaled Mini Vessel USP Dissolution Test Apparatus II [Volume 16, Issue 3, 2019, Pages 3-22]
Mohammadnezami, H. CFD Simulation of Methane Steam Micro-Reformer: Channel Design and Inlet/Outlet Configuration [Volume 16, Issue 4, 2019, Pages 23-35]
Moradi, H. Preparation and Drug-Delivery Properties of Metal-Organic Framework HKUST-1 [Volume 16, Issue 4, 2019, Pages 73-80]
Movagharnejad, K. Prediction of the pharmaceutical solubility in water and organic solvents via different soft computing models [Volume 16, Issue 1, 2019, Pages 83-100]
Movagharnejad, K. Prediction of true critical temperature and pressure of binary hydrocarbon mixtures: A Comparison between the artificial neural networks and the support vector machine [Volume 16, Issue 2, 2019, Pages 14-40]
O
Omidkhah, Mohammadreza Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]
Omidkhah, M.R Biofouling Behavior on Forward Osmosis Using Vertically Aligned CNT Membrane on Alumina [Volume 16, Issue 2, 2019, Pages 1-13]
R
Rahimi, M. Cooling Enhancement of a Photovoltaic Panel Through Ferrofluid Stimulation Using a Magnetic-Wind Turbine [Volume 16, Issue 4, 2019, Pages 35-52]
Ramakrishna, S. Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]
Ranjbara, A. Effect of MgAl2O4 catalyst support synthesis method on the catalytic activity of nickel Nano catalyst in reverse water gas shift reaction [Volume 16, Issue 3, 2019, Pages 58-69]
Rasteh, M. Segregation patterns of an equidensity TiO2 ternary mixture in a conical fluidized bed: CFD and experimental study [Volume 16, Issue 2, 2019, Pages 41-56]
Rostami, Kh. Comparison the performance of different reverse osmosis membrane modules by CFD modeling [Volume 16, Issue 1, 2019, Pages 101-116]
S
Sadri, H. R. Reactor modeling and kinetic parameters estimation for diethylbenzene (DEB) dehydrogenation reactions [Volume 16, Issue 3, 2019, Pages 23-36]
Salam, K. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]
Salawudeen, T. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]
Salimi, S. Computational fluid dynamics study and GA modeling approach of the bend angle effect on thermal-hydraulic characteristics in zigzag channels [Volume 16, Issue 3, 2019, Pages 70-83]
Sanaeepur, H. Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]
Shafieeardestani, M. Preparation and Drug-Delivery Properties of Metal-Organic Framework HKUST-1 [Volume 16, Issue 4, 2019, Pages 73-80]
Shafiei, F. Nelder-Mead algorithm optimization and Galerkin’s method thermal performance analysis of circular porous fins with various profiles in fully wet conditions [Volume 16, Issue 3, 2019, Pages 37-57]
Sharifzadeh, E. Synthesis and Characterization of Waterglass-Based Silica Aerogel Under Heat Treatment for Adsorption of Nitrate from Water: Batch and Column Studies [Volume 16, Issue 4, 2019, Pages 53-72]
Shokrollahzadeh, S. Comparison the performance of different reverse osmosis membrane modules by CFD modeling [Volume 16, Issue 1, 2019, Pages 101-116]
Sinkakarimi, A. CFD Study of Concave Turbine [Volume 16, Issue 2, 2019, Pages 103-118]
T
Taheri, P. Preparation and Drug-Delivery Properties of Metal-Organic Framework HKUST-1 [Volume 16, Issue 4, 2019, Pages 73-80]
Talaghat, M. r. Nelder-Mead algorithm optimization and Galerkin’s method thermal performance analysis of circular porous fins with various profiles in fully wet conditions [Volume 16, Issue 3, 2019, Pages 37-57]
Tohfegar, E. Synthesis and Characterization of Waterglass-Based Silica Aerogel Under Heat Treatment for Adsorption of Nitrate from Water: Batch and Column Studies [Volume 16, Issue 4, 2019, Pages 53-72]
Y
Yousefi, A. Prediction of the pharmaceutical solubility in water and organic solvents via different soft computing models [Volume 16, Issue 1, 2019, Pages 83-100]