Volume 20 (2023)
Volume 19 (2022)
Volume 18 (2021)
Volume 17 (2020)
Volume 16 (2019)
Volume 15 (2018)
Volume 14 (2017)
Volume 13 (2016)
Volume 12 (2015)
Volume 11 (2014)
Volume 10 (2013)
Volume 9 (2012)
Volume 8 (2011)
Volume 7 (2010)
Volume 6 (2009)
Volume 5 (2008)
Volume 4 (2007)
Volume 3 (2006)
Volume 2 (2005)
Volume 1 (2004)
Number of Articles: 492
sequential formulation for compositional reservoirs simulation using peng robinson equation of state
Volume 3, Issue 1 , January 2006, , Pages 52-64
Abstract
Read Morenonlinear modeling and cascade control design for multi effect falling film evaporators
Volume 3, Issue 2 , April 2006, , Pages 52-63
Abstract
Read MoreDynamic Modeling of Granular Sludge in UASB Reactors
Volume 2, Issue 1 , January 2005, , Pages 52-60
Abstract
n this paper, a mathematical model has been derived to predict the granulation time of anaerobic sludge in UASB reactors. In the proposed model, some physical, chemical and biological parameters affecting the granulation phenomena have been considered. To validate the model, 12 pilot-scale experiments ... Read MoreResponse Surface Methodology for Investigating the Effects of Hydrolysis Reaction Parameters on Molecular Structure and Performance of Polyvinyl Alcohol as Primary Suspending Agent
Volume 14, Issue 1 , March 2017, , Pages 52-66
Abstract
This study presents the synthesis of polyvinyl acetate (PVAc) by solution polymerization and its partial hydrolysis to polyvinyl alcohol (PVA) using alkaline alcoholysis. The influence of the molar ratio of hydrolysis catalyst (NaOH) to PVAc and the time and temperature of the saponification reaction ... Read MoreSynthesis of 1-(isopentyloxy)-4-nitrobenzene under ultrasound assisted liquid-liquid phase-transfer catalysis
Volume 13, Issue 3 , July 2016, , Pages 54-62
Abstract
In this paper, we report the reaction of isoamyl alcohol and 1-chloro-4-nitrobenzene was carried out in a batch reactor under aqueous-organic biphasic conditions using the techniques like phase transfer catalysis and ultrasound irradiation. Tetrabutylammonium bromide (TBAB) was employed as the phase ... Read MorePreparation of Ultra High Molecular Weight Polyethylene Using Ziegler-Natta Catalyst System: Optimization of Parameters by Response Surface Methodology
Volume 11, Issue 1 , January 2014, , Pages 55-62
Abstract
Read MoreElectrochemistry of Copper Activation of Sphalerite and Potassium Isobutyl Xanthate (KIBX) Synthesized Collectors Adsorption
Volume 10, Issue 4 , October 2013, , Pages 55-64
Abstract
Read MoreEvaluation of Effective Strategies for Cultivation of Acidithiobacillus Thiooxidans as Cement-Degrading Bacteria
Volume 10, Issue 2 , April 2013, , Pages 55-66
Abstract
Read MoreStudy of Flow Behavior of Ultrafine Particles Agglomerations in the Riser
Volume 10, Issue 1 , January 2013, , Pages 55-66
Abstract
Read MoreApplications of Waste Cooking Oil Other Than Biodiesel: A Review
Volume 12, Issue 3 , July 2015, , Pages 55-76
Abstract
Waste cooking oil (WCO) is being generated large scale all over the world; hence it has devised serious problems of its waste management. Organised collection of WCO in voluminous quantity is mainly used for the production of biodiesel. Most researchers focus primarily on the biodiesel generation from ... Read MorePhase Inversion in a Batch Liquid – Liquid Stirred System
Volume 5, Issue 2 , April 2008, , Pages 55-63
Abstract
"> Phase inversion phenomenon occurs in many industrial processes including liquidliquid dispersions. Some parameters such as energy input or the presence of mineral compounds in the system affect this phenomenon. The aim of this research is to study the speed of rotation or energy input at a range ... Read Moreinvestigation of mercaptan removal from Kerosene using passive mixing tools: Experimental study and CFD modeling
Volume 14, Issue 3 , August 2017, , Pages 55-64
Abstract
Abstract In this work, the role of appropriate mixing for mercaptan removal from Kerosene using caustic soda has been investigated in the pilot scale. Static mixer at different condition has been used as a passive mixing tool to achieve proper mixing and consequently high performance of mercaptan removal. ... Read MoreBiosorption of cobalt (II) by Inta ct and Chemically Modified Brown Algae: Optimization Using Resp onse Surface Methodology and Equilibrium, Dynamics and Thermodynamics Studies
Volume 11, Issue 2 , April 2014, , Pages 56-77
Abstract
Read MoreDeveloping a Mathematical Model to Predict the Behavior of a Supersonic Superheated Steam Flow inside a Laval Nozzle
Volume 17, Issue 2 , June 2020, , Pages 56-69
Abstract
The objective of the investigation was to mathematically correlate the behavior of a supersonic superheated steam flow inside a Laval nozzle, against the decision parameters. The decision parameters are the inlet temperature ranging from 374.3 K to 504.3 K and the inlet pressure from 40050.14 Pa to 133375.7 ... Read MoreA Microcosm Study on P-Nitrophenol Biodegradation in Soil Slurry by Alcaligenes faecalis: Plackett-Burman Design
Volume 8, Issue 2 , April 2011, , Pages 57-68
Abstract
Read MoreEffect of Time and Temperature on Moisture Content, Shrinkage, and Rehydration of Dried Onion
Volume 6, Issue 3 , July 2009, , Pages 57-70
Abstract
In this paper, the experimental data of the onion drying process by a batch cabinet dryer is investigated. Obtained experimental data including moisture content, shrinkage, and rehydration via random factorial scheme are analyzed. Comparison of data average is carried out with the help of the multi amplitude ... Read MoreThermodynamic and Heat Transfer Evaluation of Pocket Drying Section in the Multi-Cylinder Dryers of Paper Machine
Volume 13, Issue 2 , April 2016, , Pages 57-70
Abstract
In this study a developed model has been used to evaluate the paper drying process and examine the pocket dryer conditions of a multi-cylinder fluting paper machine. The model has been developed based on the mass and energy balance relationships in which the heat of sorption and its variations with paper ... Read MoreInduced tissue cell death by magnetic nanoparticle hyperthermia for cancer treatment: an in silico study
Volume 14, Issue 4 , December 2017, , Pages 59-79
Abstract
In this paper, we simulate magnetic hyperthermia process on a mathematical phantom model representing cancer tumor and its surrounding healthy tissues. The temperature distribution throughout the phantom model is obtained by solving the bio-heat equations and the consequent cell death amount is calculated ... Read MoreFabrication and characterization of polycarbonate/titanium oxide nanotubes mixed matrix membranes for efficient removal of cadmium and copper from aqueous solution
Volume 14, Issue 2 , 2017, , Pages 59-73
Abstract
In this study, novel polycarbonate-titanium oxide nanotubes (PC-TNT) ultrafiltration mixed matrix membranes (MMMs) were fabricated for decontamination of Cd2+ and Cu2+ metal ions from aqueous solution. The weight percent of TNTs in the polycarbonate membrane matrix was changed from 0 to 15. The synthesized ... Read MoreInvestigating the Influence of Nanoclosite Particles on the Mechanical Properties of Polystyrene Using Artificial Neural Networks
Volume 18, Issue 2 , May 2021, , Pages 59-70
Abstract
The synthesized polystyrene has weaknesses in terms of mechanical, physical and thermal properties which limit the use of this polymer. Therefore, the use of the mixtures of polymers can improve these properties. Different parameters like the mixing speed can affect the quality of the properties of the ... Read MoreBubble formation on a single orifice in a gas solid fluidized bed using digital image analysis
Volume 13, Issue 1 , January 2016, , Pages 60-72
Abstract
Digital Image Analysis (DIA) has been employed to characterize the time evolution of a bubble injected from a single orifice into a pseudo 2-dimansional gas-solid fluidized bed. The injected bubble diameter increased with the square root of time before detachment. During bubble free flight in the bed, ... Read MoreInvestigation of Temperature and Flow Fields in an Alternative Design of Industrial Cracking Furnaces Using CFD
Volume 7, Issue 3 , July 2010, , Pages 61-73
Abstract
Read MorePreparation of Flame Retardant Polystyrene via In-Situ Bulk Polymerization Method and Evaluation of its Flammability Properties
Volume 13, Issue 4 , November 2016, , Pages 62-70
Abstract
In this study, in-situ bulk polymerization was investigated for obtaining flame retardant polystyrene (PS). The halogenated and phosphoric compounds were used as flame retardant additives and Perkadox 30 was used as a synergist. The flammability of the PS was evaluated by thermogravimetric analyzer (TGA), ... Read MoreEvaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms
Volume 15, Issue 4 , November 2018, , Pages 63-80
Abstract
This paper reports the evaluation of adsorbing Cr (VI) ions on sorbent prepared from chitosan (CHT), a versatile derivative of chitin, and dodecyl amine modified locally available kaolinite clay (Bijoypur clay) (MC) that has excellent mechanical properties and great resistance to chemical and biological ... Read MoreInvestigating the Activity of the Supported Bimetallic Ni-Co Catalysts on the Dry Reforming of Methane
Volume 18, Issue 3 , September 2021, , Pages 63-73