Volume 20 (2023)
Volume 19 (2022)
Volume 18 (2021)
Volume 17 (2020)
Volume 16 (2019)
Volume 15 (2018)
Volume 14 (2017)
Volume 13 (2016)
Volume 12 (2015)
Volume 11 (2014)
Volume 10 (2013)
Volume 9 (2012)
Volume 8 (2011)
Volume 7 (2010)
Volume 6 (2009)
Volume 5 (2008)
Volume 4 (2007)
Volume 3 (2006)
Volume 2 (2005)
Volume 1 (2004)
Modeling and Simulation
Adsorption Behavior of Short Alkyl Chain Imidazolium Ionic Liquidsat N-Butyl Acetate + Water Interface: Experiments and Modeling

J. Saien; M. Kharazi; S. Asadabadi

Volume 12, Issue 2 , April 2015, , Pages 59-74

Abstract
  e"> The adsorption behavior of three amphiphilic ionic liquids (ILs), 1-alkyl-3- methylimidazolium chloride {[Cnmim][Cl], n=68}at the interface of n-butyl acetate + water system was studied with IL concentration range of 1.00×104-1.00×101 mol·dm3 and temperature range of 293.2-318.2 ...  Read More

Modeling and Simulation
Modeling and Simulation of a Divided Wall Column for 1,3 Butadiene Purification

R. Rahimi; M. H. Soodmand; M. Zivdar; A. Alborzi; M. Rahmanian

Volume 12, Issue 1 , January 2015, , Pages 60-67

Abstract
  The distillation process remains as the most common method ofseparation in chemical process industries. The energy used from this process accounts for an estimated 3% of the world energy consumption. The Dividing-Wall Column (DWC) for separation of multi-component mixtures has recently become a major ...  Read More

Process Control and Engineering, Process Safety, HSE
A Study of Flow and Mixing in Bubbly Gas-Liquid Pipe Flow Generated by a Grid
Volume 3, Issue 4 , October 2006, , Pages 60-75

Abstract
  The spreading of a tracer in a bubbly two-phase grid-generated turbulent flow system is studied. In this work both particle image velocimetry (PIV) and planer laser-induced fluorescence (PLIF) are used to study the effect of the dispersed phase flow rate on the mixing characteristics of the tracer. The ...  Read More

Environmental Engineering,
Monolithic Three-way Palladium Catalytic Converters for Automobile Exhaust Emission Control
Volume 2, Issue 1 , January 2005, , Pages 61-70

Abstract
  This article presents the research results on production and performance of palladium-only catalytic converters. Monolith is used as the catalyst carrier and gamma alumina as the substrate. Dipping method is used for monolith washcoating. Palladium as the active metal is impregnated on gamma alumina ...  Read More

Modeling and Simulation
Calculation of Physical Properties of the Methanol-Water Mixture Using Molecular Dynamics Simulation
Volume 6, Issue 4 , October 2009, , Pages 62-72

Abstract
  In this study some properties ofthe methanol-water mixture such as diffusivity, density, viscosity, and hydrogen bonding were calculated at different temperatures and atmospheric pressure using molecular dynamics simulations (MDS). The results were compared with the available experimental data as well ...  Read More

Environmental Engineering,
Levels of PM10 and its Chemical Composition in the Atmosphere of the City of Isfahan
Volume 5, Issue 3 , July 2008, , Pages 62-67

Abstract
  Airborne particulate matter (PM10 ) was collected from the atmosphere of the city of Isfahan. The concentration of heavy metals and anions associated with airborne particulate matter were determined using atomic absorption spectrometric and ion chromatographic techniques. A comparison was made between ...  Read More

Modeling and Simulation
Optimization of Hydrogen Distribution Network by Imperialist Competitive AlgorithmIn

M Omidifar; S Shafiei; H Soltani

Volume 13, Issue 3 , July 2016, , Pages 63-77

Abstract
  In modern refineries, hydrogen is widely used for the production of clean fuels. In this paper, a new method is presented in order to use hydrogen more effectively in refineries. This new method is based on combination of linear programming with imperialist competitive algorithm (ICA) in order to optimize ...  Read More

Reaction Engineering, Kinetics and Catalysts,
The Effects of SiO2 and Al2O3 Binders on the Activity and Selectivity of Bifunctional Fe/HZSM-5 Catalyst in Fischer-Tropsch Synthesis
Volume 5, Issue 2 , April 2008, , Pages 64-70

Abstract
  "> The influence of SiO2 and Al2O3 binders on the catalyst performance and products selectivity of the precipitated Fe-Cu-K catalyst physically mixtured with HZSM-5 was studied in a fixed bed tubular reactor. The iron catalyst was mixed with HZSM-5 zeolite and shaped to cylinders form by alumina and ...  Read More

Separation Technology,
Enhanced Degumming of Soyabean Oil and its Influences on Degummed Oil and Lecithin
Volume 5, Issue 1 , January 2008, , Pages 65-73

Abstract
  e"> In order to study the effective factors on the quality and quantity of lecithin extracted from soybean oil and the residual amount of phosphatids in degummed oil, this study was arranged. Crude oil recovered from soybean which had been processed by conventional solvent extraction and reached a ...  Read More

Process Control and Engineering, Process Safety, HSE
A Detailed Investigation of Particulate Dispersion from Kerman Cement Plant
Volume 3, Issue 3 , July 2006, , Pages 65-74

Abstract
  The aim of this study was to investigate the particulate dispersion from Kerman Cement Plant. The upwind – downwind method was used to measure particle concentration and a cascade impactor was applied to determine particle size distribution. An Eulerian model, Gaussian plume model and an artificial ...  Read More

Separation Technology,
Methanol crossover and selectivity of nafion/heteropolyacid/montmorillonite nanocomposite proton exchange membranes for DMFC applications

M. Azimi; S.J. Peighambardoust

Volume 14, Issue 3 , August 2017, , Pages 65-81

Abstract
  In this work, we prepared the nafion/montmorillonite/heteropolyacid nanocomposite membranes for direct methanol fuel cells (DMFCs). The analyses such as X-ray diffraction (XRD), Fourier transform infrared (FTIR), and scanning electron microscopy (SEM) were conducted to characterize the filler dispersion ...  Read More

Reaction Engineering, Kinetics and Catalysts,
Catalytic oxidation of toluene over LaBO3 (B= Fe, Mn and Co) and LaCo0.7B′0.3O3 (B′= Fe and Mn) perovskite-type

B. Izadkhah; D. Salari; A. Niaei; A. Tarjomannejad

Volume 14, Issue 1 , March 2017, , Pages 67-73

Abstract
  In this paper, LaBO3 perovskite type catalyst formulations were prepared by sol-gel auto combustion method using citric acid as the fuel. Activity of catalysts was tested in catalytic oxidation of toluene as a model of volatile organic compounds. LaCoO3 perovskite formulation showed the highest activity ...  Read More

Increasing flow capacity and reducing drag in microtubes using drag-reducing polymer

M.H. Akbari; M. Rahimi; H.R. Karami

Volume 17, Issue 2 , June 2020, , Pages 70-87

https://doi.org/10.22034/ijche.2020.245720.1346

Abstract
  Decreasing pressure losses in microtubes is an important subject, especially when increase in flow capacity is required. In the same pumping power, decreasing the pressure drops is coincides with increasing the fluid flow rate passing through a microtube. The current study aims to examine how the water ...  Read More