R. Parvizsedghy; M. Alibolandi; S. M. Sadrameli
Abstract
Vegetable oils are proved as valuable feedstocks in the biofuel production. Some common issues of cracking of vegetable oils–as an effective method for the biofuel production- are related to the glycerol decomposition during the cracking process. Transesterification, which can remove glycerol from ...
Read More
Vegetable oils are proved as valuable feedstocks in the biofuel production. Some common issues of cracking of vegetable oils–as an effective method for the biofuel production- are related to the glycerol decomposition during the cracking process. Transesterification, which can remove glycerol from vegetable oil molecules, is performed before the thermal cracking to adjust the problems. This study has been aimed at surveying the efficiency of transesterification and the thermal cracking integration to produce bio-gasoline and bio-oil from castor oil. In transesterification, methanol as alcohol and KOH as catalyst were used, and the catalyst concentration, reaction temperature, and alcohol to oil ratio were effective variables. Statistical studies demonstrated the interactions among parameters and the yield of the methyl ester production as 96.7 % under the optimized conditions. Results showed that in the thermal cracking two parameters, of the feed flowrate and temperature, influenced the product yield significantly without any interaction. Under the optimum conditions, to maximize the bio-gasoline production, 28 % of bio-gasoline and 88.6 % of bio-oil were produced. The lack of acrolein, as a toxic component, the negligible amount of the generated water in the product, the high octane number, the significant amount of the heat of combustion of bio-gasoline, and being in criteria of standard gasoline as per ASTM D4814 for the distillation curve and RVP of bio-gasoline, were the great advantages of the cracking of the transesterified caster oil. Therefore, the bio-gasoline produced via the thermochemical conversion of castor oil could be used as a fuel for spark-ignition engines or as an octane enhancer with gasoline, i.e., by adding 10 % of bio-gasoline to the refinery gasoline, the octane number increased from 95 to 105.
Reaction Engineering, Kinetics and Catalysts,
F. Mohammadi; M. Rahimi; A. Parvareh; M. Feyzi
Volume 15, Issue 1 , February 2018, , Pages 102-114
Abstract
In the present study, Choline hydroxide (ChOH) as an ionic liquid catalyst was used for transesterification of soybean oil into biodiesel in a microchannel reactor. The effects of three variables i.e. reaction temperature, catalyst dosage and total flow rate on fatty acid methyl ester (FAME) content ...
Read More
In the present study, Choline hydroxide (ChOH) as an ionic liquid catalyst was used for transesterification of soybean oil into biodiesel in a microchannel reactor. The effects of three variables i.e. reaction temperature, catalyst dosage and total flow rate on fatty acid methyl ester (FAME) content (wt. %) were optimized using Box–Behnken experimental design. In order to predict the FAME content a quadratic polynomial model was obtained. The optimal conditions from the model were reaction temperature of 53.53 °C, catalyst dosage of 2.6 wt. % and total flow rate of 11.82 mL/min. At these conditions, the predicted FAME content was 96.45 wt.% and the experimental FAME content was obtained 97.6 wt. %. The proximity of the experimental results and predicted values showed that the regression model issignificant. Using the ionic liquid catalyst in the studied microreactor for transesterification leads to diminish the reaction time to the order of seconds compared to conventional batch systems. In addition, the reusability of ChOH catalyst was investigated. The results revealed that the catalyst had perfect utility after several runs without much loss in the activity.
Reaction Engineering, Kinetics and Catalysts,
M. Basiri; M. Rahimi; H. Babaei Mohammadi
Volume 13, Issue 2 , April 2016, , Pages 22-32
Abstract
The ultrasound-assisted (UA) soybean oil methanolysis using KOH as a catalyst was studied at different reaction conditions in a microreactor. Box–Behnken experimental design, with three variables, was performed and the effects of three reaction variables i.e. reaction temperature, catalyst concentration ...
Read More
The ultrasound-assisted (UA) soybean oil methanolysis using KOH as a catalyst was studied at different reaction conditions in a microreactor. Box–Behnken experimental design, with three variables, was performed and the effects of three reaction variables i.e. reaction temperature, catalyst concentration and the methanol-to-oil molar ratio on fatty acid methyl ester (FAME) yield were evaluated by method of analysis of variance (ANOVA) and multiple regression. A quadratic polynomial model was obtained to predict the methyl ester yield. A yield of 97.1% for methyl ester was obtained at the deduced optimal conditions: reaction temperature of 47 °C, KOH catalyst concentration of 1.29% (w/w) and methanol-to-oil molar ratio of 6:1. Validation experiments confirmed the validity of the predicted model. At the optimal operation condition for the ultrasonic process, a higher yield of methyl esters was obtained in comparison with that of the non-ultrasonic layout. The results show that UA transesterification in microreactor minimizes the reaction time and temperature, alcohol-to-oil molar ratio as well as energy consumption.
Petroleum and Reservoir Engineering
M. Basiri; M. Rahimi; F. Mohammadi
Volume 12, Issue 3 , July 2015, , Pages 32-40
Abstract
"> In the present study, transesterification of soybean oil to Fatty Acid Methyl Ester (FAME) was carried out in the microreactor. The system performance was investigated in the presence of hexane as a cosolvent. Furthermore, the effect of number of micromixer’s inlets on the mixing was one ...
Read More
"> In the present study, transesterification of soybean oil to Fatty Acid Methyl Ester (FAME) was carried out in the microreactor. The system performance was investigated in the presence of hexane as a cosolvent. Furthermore, the effect of number of micromixer’s inlets on the mixing was one of the objectives in this work. For the goals mentioned above, three different experiments were done with and without cosolvent in two and three inlet micromixers under optimum conditions. Both flow pattern observations and Gas Chromatgoraphy (GC) characterization of FAME samples demonstrated that cosolvent technique and micromixer application could significantly influence the FAME yield in biodiesel production.