A
-
Abbasi, P.
Optimization and Comparison of Ni and Cd Removal Using Zinc Powder with the Response Surface Methodology [Volume 17, Issue 4, 2020, Pages 3-20]
-
Abdollahi, A.
Synthesis and Investigation of Stimuli-Responsive Amphiphilic Latex Nanoparticles by Seeded Emulsion Polymerization [Volume 17, Issue 1, 2020, Pages 79-89]
-
Akbari, M.H.
Increasing flow capacity and reducing drag in microtubes using drag-reducing polymer [Volume 17, Issue 2, 2020, Pages 70-87]
-
Alibolandi, M.
Production of Bio-Gasoline with High Octane Number, as a Renewable Transportation Biofuel, via Thermochemical Conversion of Castor Oil [Volume 17, Issue 3, 2020, Pages 3-23]
-
Alipour, A.
Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
-
Alizadeh, R.
Fractional Calculus Method Applied To the Apple Rings Candying in Osmotic Drying Process [Volume 17, Issue 1, 2020, Pages 90-102]
-
Amarowicz, R.
A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]
-
Ashitosh, K.
Development and Evaluation of the Magnesium Potassium Phosphate Cement Based Refractory [Volume 17, Issue 4, 2020, Pages 69-78]
-
Ashrafizadeh, .S. N.
Demuification of Water-in-Oil Emulsions by Means of Dielectrophoresis [Volume 17, Issue 3, 2020, Pages 24-40]
B
-
Bahrami, A.
Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
-
Bahramian, A.
Hazards Identification and the Units Assessment of a the Water Treatment Plant Against Pathogenic and Biotoxin Threats Affecting by Physicochemical Parameters [Volume 17, Issue 4, 2020, Pages 33-48]
-
Bakhtiari, O.
Modification of Mixed Matrix Membranes' Famous Permeability Prediction Models by Considering the Formed Voids Around Nonporous Fillers [Volume 17, Issue 3, 2020, Pages 53-73]
-
Beigzadeh, R.
Developing genetic algorithm-based neural networks and sensitivity analysis for thermal conductivity of natural gases [Volume 17, Issue 2, 2020, Pages 44-55]
C
-
Cheraghipoor, M.
Incorporation of Metal Oxide on Mica Flakes as a Green Pearlescent Pigment: Preparation and Analysis [Volume 17, Issue 2, 2020, Pages 34-43]
D
-
Dashti, A.
Synthesis and Investigation of Stimuli-Responsive Amphiphilic Latex Nanoparticles by Seeded Emulsion Polymerization [Volume 17, Issue 1, 2020, Pages 79-89]
E
-
Esfandiari, N.
Effect of Solvent on the Optimal Thermodynamic Conditions of Ternary System (CO2, Alcohol, Ampicillin) in GAS Process [Volume 17, Issue 1, 2020, Pages 37-46]
-
Etemadi, A.
Fractional Calculus Method Applied To the Apple Rings Candying in Osmotic Drying Process [Volume 17, Issue 1, 2020, Pages 90-102]
-
Etesami, N.
Effect of Electrohydrodynamic (EHD) on the Drying Rate of Polymer Films Based on the Heat and Mass Transfer [Volume 17, Issue 3, 2020, Pages 41-52]
F
-
Faraji, H.
CFD Modeling of Hydrocarbon-Air System Hydrodynamics in Three Types of Column Reactors [Volume 17, Issue 1, 2020, Pages 47-64]
-
Farajzadeh, S.
Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
G
-
Ganjizade, A.
Demuification of Water-in-Oil Emulsions by Means of Dielectrophoresis [Volume 17, Issue 3, 2020, Pages 24-40]
-
Ghazitabatabaei, Z.
Studying the Influence of the Mixing Speed of the Polymer Blend of General-Purpose Polystyrene and Acrylonitrile-Butadiene Styrene with the Applications of Artificial Neural Networks [Volume 17, Issue 4, 2020, Pages 21-32]
-
Ghorbani, Y.
Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
-
Gulcan, E.
Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
H
-
Habibi, A.R.
CFD Modeling of Hydrocarbon-Air System Hydrodynamics in Three Types of Column Reactors [Volume 17, Issue 1, 2020, Pages 47-64]
-
Hemmati, A.
Groundwater Denitrification by Using MBBR With KMT Packing [Volume 17, Issue 4, 2020, Pages 60-68]
-
Hemmati, A.
Study of the Industrial Wastewater Treatment by a Membrane Bioreactor (MBR) Case Study: Cookie Factory Wastewater [Volume 17, Issue 3, 2020, Pages 74-84]
-
Hosseini, M.
Optimization and Comparison of Ni and Cd Removal Using Zinc Powder with the Response Surface Methodology [Volume 17, Issue 4, 2020, Pages 3-20]
-
Hosseini, Z. S.
Synthesis and Investigation of Stimuli-Responsive Amphiphilic Latex Nanoparticles by Seeded Emulsion Polymerization [Volume 17, Issue 1, 2020, Pages 79-89]
J
-
Jahanban-Esfahlan, A.
A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]
-
Jahanban-Esfahlan, R.
A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]
-
Jalilnejad, E.
CFD Modeling of Hydrocarbon-Air System Hydrodynamics in Three Types of Column Reactors [Volume 17, Issue 1, 2020, Pages 47-64]
K
-
Kakaei, H.
Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
-
Karami, H.R.
Increasing flow capacity and reducing drag in microtubes using drag-reducing polymer [Volume 17, Issue 2, 2020, Pages 70-87]
-
Kazemi, F.
Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
-
Kian, M.
Study of the Industrial Wastewater Treatment by a Membrane Bioreactor (MBR) Case Study: Cookie Factory Wastewater [Volume 17, Issue 3, 2020, Pages 74-84]
-
Koksal, M.
Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
-
Kulah, G.
Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
M
-
Mehralizadeh, A.
Studying the Influence of the Mixing Speed of the Polymer Blend of General-Purpose Polystyrene and Acrylonitrile-Butadiene Styrene with the Applications of Artificial Neural Networks [Volume 17, Issue 4, 2020, Pages 21-32]
-
Mirhoseini renani, N.
Effect of Electrohydrodynamic (EHD) on the Drying Rate of Polymer Films Based on the Heat and Mass Transfer [Volume 17, Issue 3, 2020, Pages 41-52]
-
Mostoufi, N.
Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
-
Mozafari, M.
Demuification of Water-in-Oil Emulsions by Means of Dielectrophoresis [Volume 17, Issue 3, 2020, Pages 24-40]
O
-
Ovaysi, S.
Developing a Mathematical Model to Predict the Behavior of a Supersonic Superheated Steam Flow inside a Laval Nozzle [Volume 17, Issue 2, 2020, Pages 56-69]
-
Ozairy, R.
Developing genetic algorithm-based neural networks and sensitivity analysis for thermal conductivity of natural gases [Volume 17, Issue 2, 2020, Pages 44-55]
P
-
Parvizsedghy, R.
Production of Bio-Gasoline with High Octane Number, as a Renewable Transportation Biofuel, via Thermochemical Conversion of Castor Oil [Volume 17, Issue 3, 2020, Pages 3-23]
-
Poorabdollah, M.
Modified and unmodified Graphite/unsaturated polyester resin composites: thermal and mechanical behavior [Volume 17, Issue 2, 2020, Pages 14-33]
-
Prakash, B.
Development and Evaluation of the Magnesium Potassium Phosphate Cement Based Refractory [Volume 17, Issue 4, 2020, Pages 69-78]
R
-
Rabbani,, Y.
An Investigation of the Effects of Dopamine on the Superhydrophobicity of Carbonyl Iron Particles with Stearic Acid [Volume 17, Issue 4, 2020, Pages 49-59]
-
Raeisi, M.
Groundwater Denitrification by Using MBBR With KMT Packing [Volume 17, Issue 4, 2020, Pages 60-68]
-
Rahimi, M.
Increasing flow capacity and reducing drag in microtubes using drag-reducing polymer [Volume 17, Issue 2, 2020, Pages 70-87]
-
Rahimi, M.
Developing a Mathematical Model to Predict the Behavior of a Supersonic Superheated Steam Flow inside a Laval Nozzle [Volume 17, Issue 2, 2020, Pages 56-69]
-
Rahmanzadeh derisi, M.
Effect of Solvent on the Optimal Thermodynamic Conditions of Ternary System (CO2, Alcohol, Ampicillin) in GAS Process [Volume 17, Issue 1, 2020, Pages 37-46]
-
Rajabi, L.
Modified and unmodified Graphite/unsaturated polyester resin composites: thermal and mechanical behavior [Volume 17, Issue 2, 2020, Pages 14-33]
-
Rezaei, H.
Developing a Mathematical Model to Predict the Behavior of a Supersonic Superheated Steam Flow inside a Laval Nozzle [Volume 17, Issue 2, 2020, Pages 56-69]
-
Roufegarinejad, L.
A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]
S
-
Sadeghi, N.
Modification of Mixed Matrix Membranes' Famous Permeability Prediction Models by Considering the Formed Voids Around Nonporous Fillers [Volume 17, Issue 3, 2020, Pages 53-73]
-
Sadrameli, S. M.
Production of Bio-Gasoline with High Octane Number, as a Renewable Transportation Biofuel, via Thermochemical Conversion of Castor Oil [Volume 17, Issue 3, 2020, Pages 3-23]
-
Safajou Jahankhanemlou, M.
The Influences of the Nanoparticles Related Parameters on the Tensile Strength of Polymer Nanocomposites [Volume 17, Issue 1, 2020, Pages 65-78]
-
Seyyedebrahimi, S.A
An Investigation of the Effects of Dopamine on the Superhydrophobicity of Carbonyl Iron Particles with Stearic Acid [Volume 17, Issue 4, 2020, Pages 49-59]
-
Shariaty-Niassar, M.
An Investigation of the Effects of Dopamine on the Superhydrophobicity of Carbonyl Iron Particles with Stearic Acid [Volume 17, Issue 4, 2020, Pages 49-59]
-
Sharifzadeh, E.
The Influences of the Nanoparticles Related Parameters on the Tensile Strength of Polymer Nanocomposites [Volume 17, Issue 1, 2020, Pages 65-78]
-
Shayegan, J.
Study of the Industrial Wastewater Treatment by a Membrane Bioreactor (MBR) Case Study: Cookie Factory Wastewater [Volume 17, Issue 3, 2020, Pages 74-84]
-
Shayesteh, k.
Optimization and Comparison of Ni and Cd Removal Using Zinc Powder with the Response Surface Methodology [Volume 17, Issue 4, 2020, Pages 3-20]
-
Sirousazar, M.
Fractional Calculus Method Applied To the Apple Rings Candying in Osmotic Drying Process [Volume 17, Issue 1, 2020, Pages 90-102]
-
Sotude.Gharebagh, R.
Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
-
S P, Manjunath
Development and Evaluation of the Magnesium Potassium Phosphate Cement Based Refractory [Volume 17, Issue 4, 2020, Pages 69-78]
T
-
Tabibiazar, M.
A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]
-
Tohfegar, E.
The Influences of the Nanoparticles Related Parameters on the Tensile Strength of Polymer Nanocomposites [Volume 17, Issue 1, 2020, Pages 65-78]
Y
-
Yavari, N.
Modified and unmodified Graphite/unsaturated polyester resin composites: thermal and mechanical behavior [Volume 17, Issue 2, 2020, Pages 14-33]
Z
-
Zakeri, M.
Incorporation of Metal Oxide on Mica Flakes as a Green Pearlescent Pigment: Preparation and Analysis [Volume 17, Issue 2, 2020, Pages 34-43]
-
Zangouie, M.
Study of the Industrial Wastewater Treatment by a Membrane Bioreactor (MBR) Case Study: Cookie Factory Wastewater [Volume 17, Issue 3, 2020, Pages 74-84]
-
Zarghami, R.
Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]