Abbasi, P. Optimization and Comparison of Ni and Cd Removal Using Zinc Powder with the Response Surface Methodology [Volume 17, Issue 4, 2020, Pages 3-20]
Abdollahi, A. Synthesis and Investigation of Stimuli-Responsive Amphiphilic Latex Nanoparticles by Seeded Emulsion Polymerization [Volume 17, Issue 1, 2020, Pages 79-89]
Akbari, M.H. Increasing flow capacity and reducing drag in microtubes using drag-reducing polymer [Volume 17, Issue 2, 2020, Pages 70-87]
Alibolandi, M. Production of Bio-Gasoline with High Octane Number, as a Renewable Transportation Biofuel, via Thermochemical Conversion of Castor Oil [Volume 17, Issue 3, 2020, Pages 3-23]
Alipour, A. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
Alizadeh, R. Fractional Calculus Method Applied To the Apple Rings Candying in Osmotic Drying Process [Volume 17, Issue 1, 2020, Pages 90-102]
Amarowicz, R. A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]
Ashitosh, K. Development and Evaluation of the Magnesium Potassium Phosphate Cement Based Refractory [Volume 17, Issue 4, 2020, Pages 69-78]
Ashrafizadeh, .S. N. Demuification of Water-in-Oil Emulsions by Means of Dielectrophoresis [Volume 17, Issue 3, 2020, Pages 24-40]
B
Bahrami, A. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
Bahramian, A. Hazards Identification and the Units Assessment of a the Water Treatment Plant Against Pathogenic and Biotoxin Threats Affecting by Physicochemical Parameters [Volume 17, Issue 4, 2020, Pages 33-48]
Bakhtiari, O. Modification of Mixed Matrix Membranes' Famous Permeability Prediction Models by Considering the Formed Voids Around Nonporous Fillers [Volume 17, Issue 3, 2020, Pages 53-73]
Beigzadeh, R. Developing genetic algorithm-based neural networks and sensitivity analysis for thermal conductivity of natural gases [Volume 17, Issue 2, 2020, Pages 44-55]
C
Cheraghipoor, M. Incorporation of Metal Oxide on Mica Flakes as a Green Pearlescent Pigment: Preparation and Analysis [Volume 17, Issue 2, 2020, Pages 34-43]
D
Dashti, A. Synthesis and Investigation of Stimuli-Responsive Amphiphilic Latex Nanoparticles by Seeded Emulsion Polymerization [Volume 17, Issue 1, 2020, Pages 79-89]
E
Esfandiari, N. Effect of Solvent on the Optimal Thermodynamic Conditions of Ternary System (CO2, Alcohol, Ampicillin) in GAS Process [Volume 17, Issue 1, 2020, Pages 37-46]
Etemadi, A. Fractional Calculus Method Applied To the Apple Rings Candying in Osmotic Drying Process [Volume 17, Issue 1, 2020, Pages 90-102]
Etesami, N. Effect of Electrohydrodynamic (EHD) on the Drying Rate of Polymer Films Based on the Heat and Mass Transfer [Volume 17, Issue 3, 2020, Pages 41-52]
F
Faraji, H. CFD Modeling of Hydrocarbon-Air System Hydrodynamics in Three Types of Column Reactors [Volume 17, Issue 1, 2020, Pages 47-64]
Farajzadeh, S. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
G
Ganjizade, A. Demuification of Water-in-Oil Emulsions by Means of Dielectrophoresis [Volume 17, Issue 3, 2020, Pages 24-40]
Ghazitabatabaei, Z. Studying the Influence of the Mixing Speed of the Polymer Blend of General-Purpose Polystyrene and Acrylonitrile-Butadiene Styrene with the Applications of Artificial Neural Networks [Volume 17, Issue 4, 2020, Pages 21-32]
Ghorbani, Y. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
Gulcan, E. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
H
Habibi, A.R. CFD Modeling of Hydrocarbon-Air System Hydrodynamics in Three Types of Column Reactors [Volume 17, Issue 1, 2020, Pages 47-64]
Hemmati, A. Groundwater Denitrification by Using MBBR With KMT Packing [Volume 17, Issue 4, 2020, Pages 60-68]
Hemmati, A. Study of the Industrial Wastewater Treatment by a Membrane Bioreactor (MBR) Case Study: Cookie Factory Wastewater [Volume 17, Issue 3, 2020, Pages 74-84]
Hosseini, M. Optimization and Comparison of Ni and Cd Removal Using Zinc Powder with the Response Surface Methodology [Volume 17, Issue 4, 2020, Pages 3-20]
Hosseini, Z. S. Synthesis and Investigation of Stimuli-Responsive Amphiphilic Latex Nanoparticles by Seeded Emulsion Polymerization [Volume 17, Issue 1, 2020, Pages 79-89]
J
Jahanban-Esfahlan, A. A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]
Jahanban-Esfahlan, R. A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]
Jalilnejad, E. CFD Modeling of Hydrocarbon-Air System Hydrodynamics in Three Types of Column Reactors [Volume 17, Issue 1, 2020, Pages 47-64]
K
Kakaei, H. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
Karami, H.R. Increasing flow capacity and reducing drag in microtubes using drag-reducing polymer [Volume 17, Issue 2, 2020, Pages 70-87]
Kazemi, F. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
Kian, M. Study of the Industrial Wastewater Treatment by a Membrane Bioreactor (MBR) Case Study: Cookie Factory Wastewater [Volume 17, Issue 3, 2020, Pages 74-84]
Koksal, M. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
Kulah, G. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
M
Mehralizadeh, A. Studying the Influence of the Mixing Speed of the Polymer Blend of General-Purpose Polystyrene and Acrylonitrile-Butadiene Styrene with the Applications of Artificial Neural Networks [Volume 17, Issue 4, 2020, Pages 21-32]
Mirhoseini renani, N. Effect of Electrohydrodynamic (EHD) on the Drying Rate of Polymer Films Based on the Heat and Mass Transfer [Volume 17, Issue 3, 2020, Pages 41-52]
Mostoufi, N. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
Mozafari, M. Demuification of Water-in-Oil Emulsions by Means of Dielectrophoresis [Volume 17, Issue 3, 2020, Pages 24-40]
O
Ovaysi, S. Developing a Mathematical Model to Predict the Behavior of a Supersonic Superheated Steam Flow inside a Laval Nozzle [Volume 17, Issue 2, 2020, Pages 56-69]
Ozairy, R. Developing genetic algorithm-based neural networks and sensitivity analysis for thermal conductivity of natural gases [Volume 17, Issue 2, 2020, Pages 44-55]
P
Parvizsedghy, R. Production of Bio-Gasoline with High Octane Number, as a Renewable Transportation Biofuel, via Thermochemical Conversion of Castor Oil [Volume 17, Issue 3, 2020, Pages 3-23]
Poorabdollah, M. Modified and unmodified Graphite/unsaturated polyester resin composites: thermal and mechanical behavior [Volume 17, Issue 2, 2020, Pages 14-33]
Prakash, B. Development and Evaluation of the Magnesium Potassium Phosphate Cement Based Refractory [Volume 17, Issue 4, 2020, Pages 69-78]
R
Rabbani,, Y. An Investigation of the Effects of Dopamine on the Superhydrophobicity of Carbonyl Iron Particles with Stearic Acid [Volume 17, Issue 4, 2020, Pages 49-59]
Raeisi, M. Groundwater Denitrification by Using MBBR With KMT Packing [Volume 17, Issue 4, 2020, Pages 60-68]
Rahimi, M. Increasing flow capacity and reducing drag in microtubes using drag-reducing polymer [Volume 17, Issue 2, 2020, Pages 70-87]
Rahimi, M. Developing a Mathematical Model to Predict the Behavior of a Supersonic Superheated Steam Flow inside a Laval Nozzle [Volume 17, Issue 2, 2020, Pages 56-69]
Rahmanzadeh derisi, M. Effect of Solvent on the Optimal Thermodynamic Conditions of Ternary System (CO2, Alcohol, Ampicillin) in GAS Process [Volume 17, Issue 1, 2020, Pages 37-46]
Rajabi, L. Modified and unmodified Graphite/unsaturated polyester resin composites: thermal and mechanical behavior [Volume 17, Issue 2, 2020, Pages 14-33]
Rezaei, H. Developing a Mathematical Model to Predict the Behavior of a Supersonic Superheated Steam Flow inside a Laval Nozzle [Volume 17, Issue 2, 2020, Pages 56-69]
Roufegarinejad, L. A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]
S
Sadeghi, N. Modification of Mixed Matrix Membranes' Famous Permeability Prediction Models by Considering the Formed Voids Around Nonporous Fillers [Volume 17, Issue 3, 2020, Pages 53-73]
Sadrameli, S. M. Production of Bio-Gasoline with High Octane Number, as a Renewable Transportation Biofuel, via Thermochemical Conversion of Castor Oil [Volume 17, Issue 3, 2020, Pages 3-23]
Safajou Jahankhanemlou, M. The Influences of the Nanoparticles Related Parameters on the Tensile Strength of Polymer Nanocomposites [Volume 17, Issue 1, 2020, Pages 65-78]
Seyyedebrahimi, S.A An Investigation of the Effects of Dopamine on the Superhydrophobicity of Carbonyl Iron Particles with Stearic Acid [Volume 17, Issue 4, 2020, Pages 49-59]
Shariaty-Niassar, M. An Investigation of the Effects of Dopamine on the Superhydrophobicity of Carbonyl Iron Particles with Stearic Acid [Volume 17, Issue 4, 2020, Pages 49-59]
Sharifzadeh, E. The Influences of the Nanoparticles Related Parameters on the Tensile Strength of Polymer Nanocomposites [Volume 17, Issue 1, 2020, Pages 65-78]
Shayegan, J. Study of the Industrial Wastewater Treatment by a Membrane Bioreactor (MBR) Case Study: Cookie Factory Wastewater [Volume 17, Issue 3, 2020, Pages 74-84]
Shayesteh, k. Optimization and Comparison of Ni and Cd Removal Using Zinc Powder with the Response Surface Methodology [Volume 17, Issue 4, 2020, Pages 3-20]
Sirousazar, M. Fractional Calculus Method Applied To the Apple Rings Candying in Osmotic Drying Process [Volume 17, Issue 1, 2020, Pages 90-102]
Sotude.Gharebagh, R. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
S P, Manjunath Development and Evaluation of the Magnesium Potassium Phosphate Cement Based Refractory [Volume 17, Issue 4, 2020, Pages 69-78]
T
Tabibiazar, M. A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]
Tohfegar, E. The Influences of the Nanoparticles Related Parameters on the Tensile Strength of Polymer Nanocomposites [Volume 17, Issue 1, 2020, Pages 65-78]
Y
Yavari, N. Modified and unmodified Graphite/unsaturated polyester resin composites: thermal and mechanical behavior [Volume 17, Issue 2, 2020, Pages 14-33]
Z
Zakeri, M. Incorporation of Metal Oxide on Mica Flakes as a Green Pearlescent Pigment: Preparation and Analysis [Volume 17, Issue 2, 2020, Pages 34-43]
Zangouie, M. Study of the Industrial Wastewater Treatment by a Membrane Bioreactor (MBR) Case Study: Cookie Factory Wastewater [Volume 17, Issue 3, 2020, Pages 74-84]
Zarghami, R. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]