Aalaie, J. Stability and Rheological Behavior of Sulfonated Polyacrylamide/ Laponite Nanoparticles Dispersions in Electrolyte Media [Volume 14, Issue 3, 2017, Pages 41-54]
Aasadi, H. A review on the effects of fillers on gas separation Mixed Matrix Membranes [Volume 19, Issue 3, 2022, Pages 3-28]
Abasi, S. Effect of Time and Temperature on Moisture Content, Shrinkage, and Rehydration of Dried Onion [Volume 6, Issue 3, 2009, Pages 57-70]
Abbasi, Farhang Synthesis and Characterization of PDMS/PAAc Sequential IPNs [Volume 7, Issue 1, 2010, Pages 3-12]
Abbasi, I. Screening and Optimization of Gas Sweetening Process Parameters with MDEA-PZ Solvent using Plackett-Burman Approach [Volume 20, Issue 3, 2023, Pages 70-89]
Abbasi, M. Modeling of Vibration of a Fluidized Bed Cylindrical Shell [Volume 10, Issue 2, 2013, Pages 67-80]
Abbasi, M. Chemical Cleaning of Utafiltration Membrane after Treatment of Oily Wastewater [Volume 7, Issue 3, 2010, Pages 17-28]
Abbasi, P. Optimization and Comparison of Ni and Cd Removal Using Zinc Powder with the Response Surface Methodology [Volume 17, Issue 4, 2020, Pages 3-20]
Abbasi, P. Effect of Particle Size of Zinc Powder on the Efficiency of Ni-Cd Cementation in Cold Purification Reactor [Volume 20, Issue 3, 2023, Pages 90-103]
Abbasi, S. Synthesis of SnO2 and ZnO Nanoparticles and SnO2-ZnO Hybrid for the Photocatalytic Oxidation of Methyl Orange [Volume 12, Issue 3, 2015, Pages 96-105]
Abbasi, S. Thermal Conductivity of Water Based Nanofluids Containing Decorated Multi Walled Carbon Nanotubes with Different Amount of TiO2 Nanoparticles [Volume 12, Issue 1, 2015, Pages 30-40]
Abbasi, S. An experimental investigation on the effect of acid treatment of MWCNTs on the viscosity of water based nanofluids and statistical analysis of viscosity in prepared nanofluids [Volume 15, Issue 3, 2018, Pages 72-81]
Abbasi Souraki, B. Simulation of Leaching of Starch from Potato in a Batch Extractor [Volume 12, Issue 2, 2015, Pages 26-36]
Abbasi Souraki, Behrooz Mathematical Modeling of Mass Transfer during Solid-Liquid Extraction in Fixed, Expanded and Fluidized-Bed Columns [Volume 21, Issue 2, 2024, Pages 56-73]
Abdi, A. Application of artificial neural network in deoxygenation of water by glucoseoxidase immobilized in calcium alginate/MnO2 composite [Volume 15, Issue 3, 2018, Pages 82-93]
Abdolahzadeh, H. Synthesis the Bioactive Conjugates of Nisin-Xanthan through the Maillard Reaction at Moderate Temperature [Volume 20, Issue 1, 2023, Pages 78-91]
Abdoli, M. Experimental Investigation on the Effect of Parameters Influencing the Performance of a Horizontal Styrene-Water Separator [Volume 9, Issue 3, 2012, Pages 48-54]
Abdoli, M. Batch Separation of Styrene/Ethyl Benzene/Water Dispersions [Volume 7, Issue 4, 2010, Pages 22-28]
Abdollahi, A. Synthesis and Investigation of Stimuli-Responsive Amphiphilic Latex Nanoparticles by Seeded Emulsion Polymerization [Volume 17, Issue 1, 2020, Pages 79-89]
Abdollahi, M. Application and Comparison of MAF-66 with AC and CMS in Vacuum Swing Adsorption Process for CO2 Capture from Flue Gas [Volume 20, Issue 4, 2024, Pages 56-72]
Abdolmaleki, Abbas Molecular Dynamics Simulation of Polyether Compatibility with Nitrate Ester Plasticizers: as Anti-Migration Liners [Volume 22, Issue 2, 2025, Pages 35-44]
Abdolmaleki, M. Predicting Kinematic Viscosity and Cetane Number of Diesel- Biodiesel Blend Using Neural Network and Empirical Models [Volume 19, Issue 3, 2022, Pages 81-94]
Abdolrahmani, M. Methane Combustion and CO Oxidation on Ag-Doped LaMn0.8Cu0.2O3±δ Mixed Oxides Prepared by Pechini and Sol–Gel Methods [Volume 9, Issue 3, 2012, Pages 31-47]
Abdulaziz Alsairafi, A. Experimental and CFD Studies on the Effect of the Jet Position on Mixing Performance [Volume 6, Issue 3, 2009, Pages 3-12]
Abdullah, A. Z. Application of response surfase methodology for the optimization of Cu and Zn removals by sorption on pre-treated oil palm fround [Volume 3, Issue 2, 2006, Pages 73-84]
Abdullah, H. Simple Kinetic Modeling of Selective Reduction of Nitric Oxide in Diesel Exhaust Over Cu-Zn/ZSM-5 Monolithic Catalyst [Volume 7, Issue 3, 2010, Pages 74-80]
Abed, N. Group Contribution Method for Predicting the Phase Behavior of Binary Mixtures Containing Carbon Dioxide [Volume 9, Issue 1, 2012, Pages 12-22]
Abedi, V. Microencapsulation of Ethion by Interfacial Polymerization Utilizing Potassium Phthalimide-N-oxyl (PPINO) as a Promoter [Volume 8, Issue 4, 2011, Pages 34-42]
Abedin, H. Study of Light Wavelength Dependency in Red-Orange Spectrum on Continuous Culture of Synechocystis sp. PCC6803 [Volume 16, Issue 4, 2019, Pages 3-11]
Abedini, H. Effect of operating conditions on divinylbenzene production in diethyl benzene dehydrogenation reactor [Volume 15, Issue 4, 2018, Pages 93-104]
Abedini, H. Reactor modeling and kinetic parameters estimation for diethylbenzene (DEB) dehydrogenation reactions [Volume 16, Issue 3, 2019, Pages 23-36]
Abedzadegan, T. Comparison of Different Methods (Digestion, Combustion, Gasification and Pyrolysis) for Sludge Energy Recovery: A Case Study for Ekbatan’s Municipal Treatment Plant [Volume 16, Issue 1, 2019, Pages 70-83]
Abidemi, G. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]
Abimannan, P. Phase-transfer catalysis for synthesis of ethyl 2-(4-nitrophenoxy)acetate under sonication- kinetic aspects [Volume 13, Issue 2, 2016, Pages 80-87]
Abimannan, Pachaiyappan Synthesis of 1-(isopentyloxy)-4-nitrobenzene under ultrasound assisted liquid-liquid phase-transfer catalysis [Volume 13, Issue 3, 2016, Pages 54-62]
Aboalghasemi, H. The Experimental Study of Effective Parameters on Mean Drop Size in a Mixer-Settler [Volume 8, Issue 1, 2011, Pages 38-45]
Abolghasemi, H. Application of Multistage Steam Distillation Column for Extraction of Essential Oil of Rosemarinuse officinialis L. [Volume 9, Issue 4, 2012, Pages 54-64]
Abolghasemi, H. The Effects of Operational Parameters on the Efficiency of a Mixer-Settler Extractor [Volume 2, Issue 1, 2005, Pages 10-23]
Abolhasani, Mahdieh Investigating the Performance of an Ultrasound-Assisted Rotating Packed Bed Reactor for the Enhancement of the Micromixing Efficiency [Volume 18, Issue 4, 2021, Pages 49-63]
Abolhasani, Mahdieh CFD Simulation and Enhancement of Liquid-Liquid Mass Transfer under the Effect of 1.7 MHz Ultrasonic Waves [Volume 21, Issue 3, 2024, Pages 83-98]
Abolhasani, Mahdieh Investigating the Effect of Magnetic Field on the Thermal Conductivity of Ferrofluid Containing Fe3O4 and CoFe2O4 Spinel Ferrite Nanoparticles and Presenting a New Correlation [Volume 21, Issue 4, 2024, Pages 20-36]
Abolhasani, Mahdieh Effect of Magnet Position on Flow and Thermal Performance of Ferrofluids in a Channel with Constant Wall Heat Flux: A CFD Study [Volume 22, Issue 4, 2025, Pages 29-42]
Abou Qurn, R. Cyclic Voltammetry of Cobalt Chloride with L- Carrageenan (LK) Using Glassy Carbon Electrode [Volume 14, Issue 4, 2017, Pages 90-99]
Abrofarakh, Moslem Investigation of Sarin Gas Dispersion in an Indoor Environment: A CFD-ANN Study [Volume 21, Issue 4, 2024, Pages 48-61]
Ader, F. Investigating the Effects of Hollow Graphene Oxide Nanoparticles on the Thermal/Mechanical Properties of Polymer Nanocomposites: Experimental, Analytical and Simulation Approaches [Volume 18, Issue 2, 2021, Pages 71-83]
Afkhami, A. Degradation of Azo Dye Reactive Black 5 and Acid Orange 7 by Fenton-Like Mechanism [Volume 7, Issue 1, 2010, Pages 87-94]
Afrous, Ali Assessing the Impact of Hydraulic Retention Time and Sawdust on the Elimination of Pb and Co from Oily Wastewater via Vertical-Flow Constructed Wetlands (VFCWs) with Phragmites Australis Cultivation [Volume 21, Issue 1, 2024, Pages 66-80]
Afshar, M. Simulation Study of Enhanced Condensate Recovery in a Gas-Condensate Reservoir [Volume 8, Issue 1, 2011, Pages 3-14]
Afshar Ebrahimi, A. Solution of Noncatalytic Packed Bed Reactors Equations by Finite Element Method [Volume 9, Issue 2, 2012, Pages 66-83]
Afshar Ebrahimi, A. Modeling of Catalyst Effect on the Reduction Rate Enhancement of Barium Sulfate by Methane and Developing Two Environmentally Friendly Processes [Volume 7, Issue 1, 2010, Pages 13-27]
Afshary, H. Abatement of Benzyl Alcohol and Methyl Ethyl Ketone (MEK) from Polluted Air Over Nanostructured Mn -Supported Alumina Catalyst [Volume 8, Issue 1, 2011, Pages 31-37]
Aghamiri, F. The Modified Lennard-Jones and Devonshire Equation of State [Volume 5, Issue 3, 2008, Pages 52-61]
Aghamiri, F. Effect of MgAl2O4 catalyst support synthesis method on the catalytic activity of nickel Nano catalyst in reverse water gas shift reaction [Volume 16, Issue 3, 2019, Pages 58-69]
Aghamiri, Seyed Foad Removal of H2S from Synthetic Waste Gas Streams Using a Biotrickling Filter [Volume 5, Issue 3, 2008, Pages 40-51]
Aghamiri, S. F. Oil Sorption by Synthesized Exfoliated Graphite (EG) [Volume 5, Issue 1, 2008, Pages 51-64]
Aghamohammadi, Fatemeh Assessing the Impact of Hydraulic Retention Time and Sawdust on the Elimination of Pb and Co from Oily Wastewater via Vertical-Flow Constructed Wetlands (VFCWs) with Phragmites Australis Cultivation [Volume 21, Issue 1, 2024, Pages 66-80]
Aghamohammadi, Sogand Preparation of SAPO-34 Molecular Sieve Dual Template Using TEA and Morpholine: Influence of Crystallization Times on Catalyst Characteristics and Activity in the MTO Process [Volume 22, Issue 3, 2025, Pages 78-96]
Aghayarzadeh, M. Simulation and Optimization of Styrene Monomer Production Using Neural Network [Volume 11, Issue 1, 2014, Pages 30-41]
Aghazadeh, F. Abatement of Benzyl Alcohol and Methyl Ethyl Ketone (MEK) from Polluted Air Over Nanostructured Mn -Supported Alumina Catalyst [Volume 8, Issue 1, 2011, Pages 31-37]
Aghaziarati, M. Dehydration of Methanol to Dimethyl Ether Employing Modified H-ZSM-5 Catalysts [Volume 6, Issue 1, 2009, Pages 3-11]
Ahmadi, A. The Experimental Study of Effective Parameters on Mean Drop Size in a Mixer-Settler [Volume 8, Issue 1, 2011, Pages 38-45]
Ahmadi, M. Study on Trend of Biodegradability of Phenolic Compounds During Photo-Fenton Advanced Oxidation Process [Volume 5, Issue 4, 2008, Pages 23-32]
Ahmadi, R. The Effect of the Methyl Functional Group on the Physicochemical and Structural Properties of a Synthesized Semi-Aromatic Polyimides [Volume 19, Issue 2, 2022, Pages 89-99]
Ahmadi, Z. Synthesis and Characterization of Nanowires Zinc Oxide with Different Temperatures [Volume 10, Issue 2, 2013, Pages 81-86]
Ahmadian Namini, P. Synthesis and Seeding Time Effect on the Performance of Nanostructure Sodalite Membranes [Volume 4, Issue 1, 2007, Pages 54-70]
Ahmadi Danesh Ashtian, H. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]
Ahmadpour, A. Investigation of spent caustic wastewater treatment through response surface methodology and artificial neural network in a photocatalytic reactor [Volume 15, Issue 1, 2018, Pages 46-72]
Akbari, A. Removal of Pb (II) From Wastewater Using Henna; Optimization of Operational Conditions [Volume 15, Issue 4, 2018, Pages 17-26]
Akbari, M.H. Increasing flow capacity and reducing drag in microtubes using drag-reducing polymer [Volume 17, Issue 2, 2020, Pages 70-87]
Akbarzadeh, Abolfazl Synthesis and Characterization of Doxorubicin Coated with Magnetic Copolymer Polycaprolactone-Polyethylene Glycol for Use in the Cancer Treatment [Volume 18, Issue 4, 2021, Pages 36-48]
Akbarzadeh, M. R. Multidimensional Dynamic Modeling of Milk Ultrafiltration Using Neuro-Fuzzy Method and a Hybrid Physical Model [Volume 5, Issue 2, 2008, Pages 3-22]
Alaie, E. Photocatalytic Degradation of PAHs Contaminated Soil in South Pars Economic and Energy Zone with TiO2 Nanocatalyst [Volume 4, Issue 1, 2007, Pages 14-20]
Alavi, S. M. CO x Free Hydrogen Production by Catalytic Decomposition of Methane Over Porous Ni/Al2O3 Catalysts [Volume 8, Issue 4, 2011, Pages 24-33]
Alborzi, A. Modeling and Simulation of a Divided Wall Column for 1,3 Butadiene Purification [Volume 12, Issue 1, 2015, Pages 60-67]
Ale ebrahim, H. Catalytic reduction of SO2 with CH4 to elemental sulfur: A comparative analysis of alumina, copper-alumina and nickel-alumina catalysts [Volume 15, Issue 3, 2018, Pages 94-107]
Ale Ebrahim, H. Solution of Noncatalytic Packed Bed Reactors Equations by Finite Element Method [Volume 9, Issue 2, 2012, Pages 66-83]
Ale Ebrahim, H. Modeling of Catalyst Effect on the Reduction Rate Enhancement of Barium Sulfate by Methane and Developing Two Environmentally Friendly Processes [Volume 7, Issue 1, 2010, Pages 13-27]
Alemzadeh, I. Seed Coat Soybean Peroxidase: Extraction and Biocatalytic Properties Determination [Volume 7, Issue 2, 2010, Pages 28-38]
Aliabadi, M. Use of Agricultural Waste for Removal of Cr(VI) from Aqueous Solution [Volume 8, Issue 4, 2011, Pages 11-23]
Alibolandi, M. Production of Bio-Gasoline with High Octane Number, as a Renewable Transportation Biofuel, via Thermochemical Conversion of Castor Oil [Volume 17, Issue 3, 2020, Pages 3-23]
Alihemati, Z. Response Surface Methodology for Investigating the Effects of Hydrolysis Reaction Parameters on Molecular Structure and Performance of Polyvinyl Alcohol as Primary Suspending Agent [Volume 14, Issue 1, 2017, Pages 52-66]
Alikhani Hesari, F. Catalytic Pyrolysis of General Purpose PolyStyrene Using Red Mud as a Catalyst [Volume 11, Issue 4, 2014, Pages 10-20]
Alimohammadi, Nemat Comparing the Performance of Heterogeneous Pd-Supported Catalysts: Pd/ZSM-5, Pd/13X and Pd/Al2O3 for the Hydrogenation of Benzene in a Mixture of Normal Heptane and Benzene [Volume 18, Issue 4, 2021, Pages 3-19]
Alinejad, M. Dielectric Study on Polar Binary Mixtures of (Ester-Alcohol) at 298.2 K [Volume 9, Issue 3, 2012, Pages 22-30]
Alinejad, Z. Synthesis and Characterization of PDMS/PAAc Sequential IPNs [Volume 7, Issue 1, 2010, Pages 3-12]
Alipour, A. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
Alizadeh, B. Investigation of Hydrogen Sulfide Oil Pollution Source: Asmari Oil Reservoir of Marun Oil Field in the Southwest of Iran [Volume 9, Issue 3, 2012, Pages 63-74]
Alizadeh, M. Synthesis and Characterization of PDMS/PAAc Sequential IPNs [Volume 7, Issue 1, 2010, Pages 3-12]
Alizadeh, N. Simulation and Experimental Investigation of the Permeability Reduction due to Asphaltene Deposition in Porous Media [Volume 7, Issue 3, 2010, Pages 3-16]
Alizadeh, O. Investigating the Impact of Air Injection on the Thermal Performance of Helical Tube with Varying Helix Diameters: Downward Flow [Volume 19, Issue 2, 2022, Pages 38-50]
Alizadeh, O. A review on the effects of fillers on gas separation Mixed Matrix Membranes [Volume 19, Issue 3, 2022, Pages 3-28]
Alizadeh, O. Improving the performance of a two-phase ejector using genetic algorithm based on secondary fluid entrainment rate [Volume 19, Issue 4, 2022, Pages 95-109]
Alizadeh, Omid Fabricating a Polysulfone-ZIF-8 Composite Membrane for Separating CO2 and CH4 [Volume 21, Issue 3, 2024, Pages 3-13]
Alizadeh, R. Simulation and Optimization of Styrene Monomer Production Using Neural Network [Volume 11, Issue 1, 2014, Pages 30-41]
Alizadeh, R. Synthesis and Characterization of Nanostructured CuO/CeO2 Catalysts via Ultrasound Assisted Techniques used for Selective Oxidation of CO [Volume 10, Issue 3, 2013, Pages 51-59]
Alizadeh, R. Modeling of Catalyst Effect on the Reduction Rate Enhancement of Barium Sulfate by Methane and Developing Two Environmentally Friendly Processes [Volume 7, Issue 1, 2010, Pages 13-27]
Alizadeh, R. Thermodynamic and Heat Transfer Evaluation of Pocket Drying Section in the Multi-Cylinder Dryers of Paper Machine [Volume 13, Issue 2, 2016, Pages 57-70]
Alizadeh, R. CFD modeling for selective formation of propylene from methanol over synthesized Mn-substituted MFI metallosilicate catalyst [Volume 15, Issue 2, 2018, Pages 22-37]
Alizadeh, R. Fractional Calculus Method Applied To the Apple Rings Candying in Osmotic Drying Process [Volume 17, Issue 1, 2020, Pages 90-102]
Alizadeh, Reza Ultrasonic Assisted Synthesis and Characterization of xCuO/CeO2–γAl2O3 Nanoatalysts [Volume 13, Issue 3, 2016, Pages 43-53]
Alizadeh, Reza Technical-Economic Analysis of Chemical Hydrolysis of Microalgae for Bioethanol Production using SuperPro Designer® [Volume 21, Issue 3, 2024, Pages 34-48]
Alizadeh, T. Improvement of the Metal Extraction and Removal of Harmful Impurities from Sulfide Ores by Polyoxometalate Oxidizers: Design of Experiments and Industrial Modeling [Volume 20, Issue 3, 2023, Pages 21-54]
Allahverdi, A. Evaluation of Effective Strategies for Cultivation of Acidithiobacillus Thiooxidans as Cement-Degrading Bacteria [Volume 10, Issue 2, 2013, Pages 55-66]
Allahverdi, A. Studies on Main Properties of Ternary Blended Cement with Limestone Powder and Microsilica [Volume 4, Issue 1, 2007, Pages 3-13]
Almasi, A. Degradation of Diclofenac Sodium under Solar Light Irradiation by Photocatalytic Performance of ZnO and V2O5 [Volume 15, Issue 4, 2018, Pages 1-16]
Almasi, N. Enhanced Heat Transfer in Micromixers with Magnetic Fields: CFD Modeling and Analysis of Ferrofluid Convection [Volume 20, Issue 1, 2023, Pages 22-35]
Almasvandi, Mo. H. Waste water ammonia stripping intensification using microfluidic system [Volume 14, Issue 4, 2017, Pages 17-31]
Amarowicz, R. A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]
Ameri, A. A hybrid neural–genetic algorithm for predicting pure and impure CO2 minimum miscibility pressure [Volume 3, Issue 4, 2006, Pages 44-59]
Ameri, E. Using PERVAP 2201 Membrane in Vapor Permeation Facilitated Isopropyl Propionate Production through Esterification Reaction [Volume 9, Issue 2, 2012, Pages 14-21]
Amini, M. Application of Turbo-Expander for Greenhouse Gas and Air Pollutant Emissions Reduction Using Exergy and Economical Analysis [Volume 14, Issue 4, 2017, Pages 32-47]
Amini, Sh. Simulation Study of Enhanced Condensate Recovery in a Gas-Condensate Reservoir [Volume 8, Issue 1, 2011, Pages 3-14]
Aminian, J. Investigation of Temperature and Flow Fields in an Alternative Design of Industrial Cracking Furnaces Using CFD [Volume 7, Issue 3, 2010, Pages 61-73]
Aminshahidy, B. Simulation Study of Enhanced Condensate Recovery in a Gas-Condensate Reservoir [Volume 8, Issue 1, 2011, Pages 3-14]
Amirabedi, Parya Mathematical Modeling and Parameters Optimization of the Degradation of Acrylonitrile in Biofilters [Volume 18, Issue 3, 2021, Pages 3-15]
Amiri, F. Application of Bioaugmentation Technology to Improve the Activated Sludge Treatment Process in Removal of Aromatic Compounds [Volume 4, Issue 1, 2007, Pages 43-53]
Amiri, F. Optimization of cultivation conditions of Candida catenulata in synthesizing acidic sophorolipid [Volume 20, Issue 3, 2023, Pages 54-69]
Amiri, H. Simulation and optimization of energy in oil storage tanks using nanocomposite of phase change materials by Computational Fluid Dynamics [Volume 20, Issue 2, 2023, Pages 62-86]
Amirkhani, L. Investigating the Influence of Nanoclosite Particles on the Mechanical Properties of Polystyrene Using Artificial Neural Networks [Volume 18, Issue 2, 2021, Pages 59-70]
Amirkhani, Leila Optimization of Candida rugosa lipase immobilization parameters on magnetic silica aerogel using adsorption method [Volume 13, Issue 3, 2016, Pages 19-31]
Amirkhani, Leila Synthesis and Characterization of Doxorubicin Coated with Magnetic Copolymer Polycaprolactone-Polyethylene Glycol for Use in the Cancer Treatment [Volume 18, Issue 4, 2021, Pages 36-48]
Amirkhani, Rasool Investigation of Sarin Gas Dispersion in an Indoor Environment: A CFD-ANN Study [Volume 21, Issue 4, 2024, Pages 48-61]
Amirshaghaghi, Z. Studies of Migration of Styrene Monomer from Polystyrene Packaging into the Food Simulant [Volume 8, Issue 4, 2011, Pages 43-49]
Amirzadeh, S. Investigation of Bubble Characteristics by Photographic Method [Volume 19, Issue 3, 2022, Pages 69-80]
Amjadian, p. Enhanced Heat Transfer in Micromixers with Magnetic Fields: CFD Modeling and Analysis of Ferrofluid Convection [Volume 20, Issue 1, 2023, Pages 22-35]
Amooe, A. A Study of Surface Tension of Binary Mixtures of Poly (Ethylene Glycol) in Water and Poly (Propylene Glycol) in Ethanol and its Modeling Using Neural Network [Volume 11, Issue 1, 2014, Pages 19-29]
Amooey, A. A. Representation of Adsorption Data for the Case of Energetically Heterogeneous Solid Surfaces Using Artificial Neural Network [Volume 9, Issue 4, 2012, Pages 49-53]
Amooey, A.A. Cadmium Removal from Aqueous Solution by Canola Residues: Adsorption Equilibrium and Kinetics [Volume 10, Issue 3, 2013, Pages 39-50]
Amoue, M. Phase Inversion in a Batch Liquid – Liquid Stirred System [Volume 5, Issue 2, 2008, Pages 55-63]
Amouei, A.I. Cadmium Removal from Aqueous Solution by Canola Residues: Adsorption Equilibrium and Kinetics [Volume 10, Issue 3, 2013, Pages 39-50]
Amouei Torkmahalleh, M. Application of Multistage Steam Distillation Column for Extraction of Essential Oil of Valeriana officinialis L. Cultivated in Iran [Volume 10, Issue 4, 2013, Pages 79-84]
Anvar, A. Comparative Study on Space Qualified Paints Used for Thermal Control of a Small Satellite [Volume 6, Issue 2, 2009, Pages 50-62]
Arab-Taheri, Roshanak Investigation of Solid Mixing in a Spherical Triaxe Mixer Using the Discrete Element Method [Volume 22, Issue 2, 2025, Pages 12-34]
Arabzadeh, R. Effect of silica particles on adhesion strength of polyvinyl chloride coatings on metal substrates [Volume 14, Issue 2, 2017, Pages 74-82]
Arami, M. Investigation on the capability of Silkworm Pupa as a Natural Adsorbent for Removal of Dyes from Textile Effluent [Volume 1, Issue 2, 2004, Pages 39-44]
Ardjmand, M. Measurement and Correlation of Ibuprofen in Supercritical Carbon Dioxide Using Stryjek and Vera EOS [Volume 7, Issue 4, 2010, Pages 42-49]
Ardjmand, M. Microfluidic extraction of tannic acid from Quercus leaves [Volume 15, Issue 3, 2018, Pages 15-33]
Arefazar, A. Thermal and Morphological Properties of Thermoplastic Elastomer Nanocomposites Based on PA6/NBR [Volume 8, Issue 1, 2011, Pages 56-65]
Arinkoola, A. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]
Arjmand, M. Convective Heat Transfer Enhancement of CNT-Water Nanofluids in Plain Tube Fitted with Wire Coil Inserts [Volume 11, Issue 2, 2014, Pages 43-55]
Arjmand, Mehdi Experimental Measurement and Thermodynamic Modeling of CO2 Absorption in a Wide Range of Aqueous MDEA Solutions (10-98 wt%) [Volume 21, Issue 3, 2024, Pages 14-33]
Arjmand, R. Flocculation Behavior of Ultrafine Quartz and Magnetite as the Main Mineral Components of Iron Ore Tailings [Volume 18, Issue 2, 2021, Pages 3-18]
Arjomandi, H. Experimental, Kinetics and Isotherm Modeling of Carbon Dioxide Adsorption with 13X Zeolite in a fixed bed column [Volume 16, Issue 1, 2019, Pages 54-64]
Asadabadi, S. Adsorption Behavior of Short Alkyl Chain Imidazolium Ionic Liquidsat N-Butyl Acetate + Water Interface: Experiments and Modeling [Volume 12, Issue 2, 2015, Pages 59-74]
Asadi, M. Photocatalytic Degradation of PAHs Contaminated Soil in South Pars Economic and Energy Zone with TiO2 Nanocatalyst [Volume 4, Issue 1, 2007, Pages 14-20]
Asadi, S. Effect of the Carbon Source Flow Rate on the Quality of the Growth of Super-Aligned Carbon Nanotube Arrays by the Chemical Vapor Deposition Method [Volume 20, Issue 3, 2023, Pages 45-53]
Asadi, Samer Nature-Inspired Silver Nanoparticles: Easy Process Optimization with Celtis caucasica Leaves and Antibacterial Insights [Volume 22, Issue 3, 2025, Pages 34-49]
Asadi Malekshah, V. Comparison between to versions of the SAFT EOS in the study of PVT and VLE phase behavior of pure polymer melts and binary polymer solutions [Volume 3, Issue 2, 2006, Pages 33-51]
Asadollahi, M. Two Phase Flow Pressure Drop Calculation Using Homogeneous Equilibrium Model [Volume 16, Issue 3, 2019, Pages 84-92]
Asadollahzadeh, M. Stochastic Comparisons of Probability Distribution Functions with Experimental Data in a Liquid-Liquid Extraction Column for Determination of Drop Size Distributions [Volume 14, Issue 3, 2017, Pages 82-95]
Asgari, H. Aqueous Quinoline Treatment with Iron/ Copper Activated UV/ Persulfate Process in a Falling Film Photo-Reactor [Volume 11, Issue 4, 2014, Pages 50-63]
Asgharzadeh, F. Cadmium Removal from Aqueous Solution by Canola Residues: Adsorption Equilibrium and Kinetics [Volume 10, Issue 3, 2013, Pages 39-50]
Ashitosh, K. Development and Evaluation of the Magnesium Potassium Phosphate Cement Based Refractory [Volume 17, Issue 4, 2020, Pages 69-78]
Ashoori, S. Simulation and Experimental Investigation of the Permeability Reduction due to Asphaltene Deposition in Porous Media [Volume 7, Issue 3, 2010, Pages 3-16]
Ashrafizadeh, .S. N. Demuification of Water-in-Oil Emulsions by Means of Dielectrophoresis [Volume 17, Issue 3, 2020, Pages 24-40]
Ashrafizadeh, S. N. Dehydration of Natural Gas Using Synthesized Chabazite Zeolite Membranes [Volume 12, Issue 1, 2015, Pages 13-21]
Ashrafmansouri, ُS.Saba Predicting Ionic Liquids’ Second-Order Derivative Properties based on a Combination of SAFT-γ EoS and a GC Technique [Volume 18, Issue 1, 2021, Pages 56-70]
Asr, R. Experimental Comparison of Two Modifications of Activated Sludge for Treatment of Furfural-Containing Wastewater [Volume 2, Issue 1, 2005, Pages 3-9]
Ateshi, H. An Experimental and Theoretical Investigation on Thermal Performance of a Gas-Liquid Thermosyphon Heat Pipe Heat Exchanger in a Semi-Industrial Plant [Volume 6, Issue 3, 2009, Pages 13-25]
Atitebi, Z. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]
Ayatollahi, Sh. Chemical Induced Wettability Alteration of Carbonate Reservoir Rocks [Volume 6, Issue 1, 2009, Pages 66-73]
Ayatollahi, Sh. Surfactant Remediation of LNAPL Contaminated Soil; Effects of adding alkaline and foam producing substances [Volume 5, Issue 2, 2008, Pages 34-44]
Ayatollahi, Sh. Simulation of Water Coning in Oil Reservoirs Using a Corrected IMPES Method [Volume 5, Issue 4, 2008, Pages 3-11]
Azadi, P. Improvement of gas separation properties of polyurethane membrane using plasma grafting [Volume 14, Issue 3, 2017, Pages 19-30]
Azadmanesh, Mitra Nature-Inspired Silver Nanoparticles: Easy Process Optimization with Celtis caucasica Leaves and Antibacterial Insights [Volume 22, Issue 3, 2025, Pages 34-49]
Azami, H. Biofouling Behavior on Forward Osmosis Using Vertically Aligned CNT Membrane on Alumina [Volume 16, Issue 2, 2019, Pages 1-13]
Azimi, M. Methanol crossover and selectivity of nafion/heteropolyacid/montmorillonite nanocomposite proton exchange membranes for DMFC applications [Volume 14, Issue 3, 2017, Pages 65-81]
Azimi, N. Cooling Enhancement of a Photovoltaic Panel Through Ferrofluid Stimulation Using a Magnetic-Wind Turbine [Volume 16, Issue 4, 2019, Pages 35-52]
Azimi, N. Enhanced Heat Transfer in Micromixers with Magnetic Fields: CFD Modeling and Analysis of Ferrofluid Convection [Volume 20, Issue 1, 2023, Pages 22-35]
Azimi, N. Simulation and optimization of energy in oil storage tanks using nanocomposite of phase change materials by Computational Fluid Dynamics [Volume 20, Issue 2, 2023, Pages 62-86]
Azimi, N. CFD Modeling of the Movement of Bladeless Wind Turbines [Volume 20, Issue 4, 2024, Pages 40-55]
Azimi, Neda Feasibility of the Purification of Pharmaceuticals from Aqueous Solutions using Carbon Nanotubes in the Presence of Oxidizers [Volume 21, Issue 2, 2024, Pages 43-55]
Azimi, Neda CFD Simulation and Enhancement of Liquid-Liquid Mass Transfer under the Effect of 1.7 MHz Ultrasonic Waves [Volume 21, Issue 3, 2024, Pages 83-98]
Azimi, Neda Achieving Optimal Conditions of Membrane Bioreactors for Dairy Industry Wastewater Treatment [Volume 21, Issue 3, 2024, Pages 49-65]
Azimi, Pedram Reducing the Environmental Impact of Thermal Power Plants: A Case Study [Volume 22, Issue 2, 2025, Pages 86-99]
Azimi, S. Simulation and investigation of thermodynamics and energy of methanol purification unit [Volume 19, Issue 3, 2022, Pages 95-107]
Aziz, Z. Investigation of Packing Effect on Mass Transfer Coefficient in a Single Drop Liquid Extraction Column [Volume 7, Issue 4, 2010, Pages 3-11]
Azizi, M. Anticancer and Antioxidant Properties of Ag NPs Coated with BSA NPs [Volume 12, Issue 1, 2015, Pages 22-29]
B
Babaee, A. Study of Enhanced Bioremediation in Treatment of Gas Condensates Contaminated Soil [Volume 9, Issue 4, 2012, Pages 16-24]
Babaee, S. Prediction of Liquid-Liquid Equilibria of Binary Systems Containing Alcohols Using EoS-GE Models [Volume 7, Issue 4, 2010, Pages 12-21]
Babaei, S. Effect of electrokinetic on biodegradation of fluorene and phenanthrene in soil [Volume 13, Issue 2, 2016, Pages 71-79]
Babaei Mohammadi, H. Ultrasound-Assisted Biodiesel Production in microreactors [Volume 13, Issue 2, 2016, Pages 22-32]
Babaluo, A. A. Asymptotic Analysis of Binary Gas Mixture Separation by Nanometric Tubular Ceramic Membranes: Cocurrent and Countercurrent Flow Patterns [Volume 3, Issue 3, 2006, Pages 3-16]
Babaluo, A.A. Synthesis and Seeding Time Effect on the Performance of Nanostructure Sodalite Membranes [Volume 4, Issue 1, 2007, Pages 54-70]
Babapoor, A. Simulation and optimization of energy in oil storage tanks using nanocomposite of phase change materials by Computational Fluid Dynamics [Volume 20, Issue 2, 2023, Pages 62-86]
Babazadeh, Y. Multidimensional Dynamic Modeling of Milk Ultrafiltration Using Neuro-Fuzzy Method and a Hybrid Physical Model [Volume 5, Issue 2, 2008, Pages 3-22]
Babic, S.Z. Desulfurization and demetalization of used engine oil in laboratory scale [Volume 15, Issue 1, 2018, Pages 73-88]
Badrnezhad, Ramin Investigating the Effective Parameters on purity Purification of Recycled Graphite from Spent Lithium-Ion Batteries [(Articles in Press)]
Bagheri, H. Plantwide Control Structure of the Diethyl Oxalate Process Concerning: Safety and Process Improvement [Volume 19, Issue 4, 2022, Pages 52-75]
Bagheri, R. Theoretical and Experimental Study of Falling- Cylinder Rheometer [Volume 1, Issue 2, 2004, Pages 19-27]
Bagheri Lotfabad, T. Immobilization of Rhizomucor miehei Lipase on High Density Polyethylene [Volume 1, Issue 2, 2004, Pages 29-37]
Bahmani, Elham Technical-Economic Analysis of Chemical Hydrolysis of Microalgae for Bioethanol Production using SuperPro Designer® [Volume 21, Issue 3, 2024, Pages 34-48]
Bahmani, M. Product Yields Prediction of Tehran Refinery Hydrocracking Unit Using Artificial Neural Networks [Volume 7, Issue 4, 2010, Pages 50-63]
Bahmani, M. Modeling of controlled particle deposition on to electronically conducting surfaces [Volume 3, Issue 1, 2006, Pages 3-12]
Bahmani-Makvandzadeh, Majid Study of contribution of hydrodynamics and surface forces to controlled particle deposition [Volume 1, Issue 1, 2004, Pages 11-21]
Bahmanyar, H. Electro-Coalescence of an Aqueous Droplet at an Oil–Water Interface with an Investigation of Secondary Droplets Formation [Volume 10, Issue 1, 2013, Pages 30-44]
Bahmanyar, H. Investigation of Packing Effect on Mass Transfer Coefficient in a Single Drop Liquid Extraction Column [Volume 7, Issue 4, 2010, Pages 3-11]
Bahmanyar, H. The Effects of Operational Parameters on the Efficiency of a Mixer-Settler Extractor [Volume 2, Issue 1, 2005, Pages 10-23]
Bahoosh, M. Comparison the performance of different reverse osmosis membrane modules by CFD modeling [Volume 16, Issue 1, 2019, Pages 101-116]
Bahrami, A. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
Bahrami, H. Preparation of Ultra High Molecular Weight Polyethylene Using Ziegler-Natta Catalyst System: Optimization of Parameters by Response Surface Methodology [Volume 11, Issue 1, 2014, Pages 55-62]
Bahrami, S.H. Investigation on the capability of Silkworm Pupa as a Natural Adsorbent for Removal of Dyes from Textile Effluent [Volume 1, Issue 2, 2004, Pages 39-44]
Bahramian, A. Hazards Identification and the Units Assessment of a the Water Treatment Plant Against Pathogenic and Biotoxin Threats Affecting by Physicochemical Parameters [Volume 17, Issue 4, 2020, Pages 33-48]
Bahramian, A. L. Theoretical Prediction of the Size and Lifetime of Evaporating Sneeze Droplets in a Confined Space: A Guideline to Control of COVID-19 Virus Transmission [Volume 19, Issue 2, 2022, Pages 68-88]
Bahramian, A. R. Hydrodynamic Characteristics of Dense Conical Fluidized Bed: CFD Simulation and Experimental Verification [Volume 12, Issue 1, 2015, Pages 42-59]
Bahramian*, A. R. CFD Insight of the Flow Dynamics and Velocity Fields in a Gas Turbine Combustor with a Swirl Flame [Volume 12, Issue 2, 2015, Pages 37-49]
Bahri, Mohammad Mahdi Investigating the Effective Parameters on purity Purification of Recycled Graphite from Spent Lithium-Ion Batteries [(Articles in Press)]
Bahri rasht Abadi, M. M. Optimizing of Synthesis of High Purity HMX Using Polyphosphoric Acid by Response Surface Method [Volume 20, Issue 2, 2023, Pages 50-61]
Bahri Rasht Abadi, M. M Parasitic Effect of Tube Wall Longitudinal Heat Conduction on Cryogenic Gas Temperature [Volume 14, Issue 1, 2017, Pages 15-25]
Bahri Rasht Abadi, M. M Transient thermal study of recuperative tube in tube heat exchanger operating in refrigeration system using experimental test and mathematical simulation [Volume 14, Issue 3, 2017, Pages 3-18]
Bahrpayma, S. Performance of Membrane Bioreactor in Removal of Heavy Metals from Industrial Wastewater [Volume 5, Issue 4, 2008, Pages 33-38]
Bairami, A. Screening and Optimization of Gas Sweetening Process Parameters with MDEA-PZ Solvent using Plackett-Burman Approach [Volume 20, Issue 3, 2023, Pages 70-89]
Bakeri, Gh. Fabrication and characterization of polycarbonate/titanium oxide nanotubes mixed matrix membranes for efficient removal of cadmium and copper from aqueous solution [Volume 14, Issue 2, 2017, Pages 59-73]
Bakhshi, A. A Simple One-Dimensional Model for Investigation of Heat and Mass Transfer Effects on Removal Efficiency of Particulate Matters in a Venturi Scrubber [Volume 6, Issue 4, 2009, Pages 3-14]
Bakhshi, R. Fabrication and Characterization of Polysulfone-Graphene Oxide Mixed Matrix Membranes for the Natural Gas Treatment [Volume 19, Issue 2, 2022, Pages 21-37]
Bakhtiari, F. Assessing Nanostarch-Nanoclay Composite Film as a Potentially Durable Environmental-Friendly Packaging Material [Volume 20, Issue 3, 2023, Pages 3-20]
Bakhtiari, H.R. Experimental investigation of power consumption, mass transfer coefficient and flow regime in gas-liquid dispersion systems [Volume 3, Issue 2, 2006, Pages 3-12]
Bakhtiari, O. Modification of Mixed Matrix Membranes' Famous Permeability Prediction Models by Considering the Formed Voids Around Nonporous Fillers [Volume 17, Issue 3, 2020, Pages 53-73]
Bakhtiari, O. Investigation. effect. of mixed. matrix. membranes’. structural. parameters. on their. effective. gaseous. penetrant. diffusion. ratio using. CFD tools [Volume 19, Issue 4, 2022, Pages 3-19]
Balesini, A.A. Solvent Extraction of Zinc from Acidic Solution Obtained from Cold Purification Filter Cake of Angouran Mine Concentrate Using D2EHPA [Volume 8, Issue 3, 2011, Pages 43-47]
Bandari, M. Effect of Mixer Rotational Speed on Heat Transfer Coefficient in Preparation of Nickle Perovskite From Laboratory to Bench Scale [Volume 6, Issue 3, 2009, Pages 71-87]
Baniamer, M. Degradation of Diclofenac Sodium under Solar Light Irradiation by Photocatalytic Performance of ZnO and V2O5 [Volume 15, Issue 4, 2018, Pages 1-16]
Banifatemi, M. Photocatalytic Decomposition of Epichlorohydrin by TiO 2 /Ag Coated Sintered Glass Filters [Volume 11, Issue 1, 2014, Pages 69-74]
Banifatemi, M. Removal of Surfactants from wastewater by Rice Husk [Volume 3, Issue 3, 2006, Pages 44-50]
Banifathemi, M. Decolorization of Distillery Wastewater by UV irradiated spores of Aspergillus fumigatus [Volume 2, Issue 2, 2005, Pages 49-55]
Barati, A. Surface Adsorption of Polyethylene Glycol and Polyvinyl Alcohol with Variable Molecular Weights on Zinc Oxide Nanoparticles [Volume 8, Issue 1, 2011, Pages 20-30]
Bargan, Alexandra Experimental Studies of Surface Tensions for Binary and Ternary Systems of Benzyl Alcohol, N-Hexanol and Water. Modeling with Neural Networks [Volume 21, Issue 1, 2024, Pages 3-16]
Barikani, M. Application of ESD and PR+Wong Sandler Mixing Rule Equations of State to Study Methane Hydrate Formation in the Presence of Different Inhibitors [Volume 8, Issue 3, 2011, Pages 16-30]
Barikani, M. The Effect of Cobalt Naphthenate and 2-benzoylbenzoic Acid on UV-Degradation of LDPE [Volume 8, Issue 3, 2011, Pages 31-42]
Barkat, D. Electrochemistry of Copper Activation of Sphalerite and Potassium Isobutyl Xanthate (KIBX) Synthesized Collectors Adsorption [Volume 10, Issue 4, 2013, Pages 55-64]
Baroutian, S. A Detailed Investigation of Particulate Dispersion from Kerman Cement Plant [Volume 3, Issue 3, 2006, Pages 65-74]
Barzegari, A. Fabrication of Chitosan-Polyethylene Oxide Electrospun Nanofibrous Mats Containing Green Tea Extract [Volume 15, Issue 2, 2018, Pages 65-77]
Barzegari, D. Simulation of Water Coning in Oil Reservoirs Using a Corrected IMPES Method [Volume 5, Issue 4, 2008, Pages 3-11]
Barzin, J. Production and Characterization of Gelatine Based Electro-spun Nano-fibres as Burn Wound Dressings [Volume 14, Issue 1, 2017, Pages 3-14]
Bashipour, Fatemeh Predicting the Cetane Number of Biodiesel using two AI-Models: the Gradient-based ANN and ANN Optimized by Genetic Algorithm [Volume 21, Issue 2, 2024, Pages 15-28]
Bashipour, Fatemeh Sustainable Synthesis of Methanol through Synthesis Gas Produced from Three Lignocellulosic Biomasses: Process Simulation and Economic Analysis [Volume 22, Issue 1, 2025, Pages 67-86]
Bashipour, Fatemeh Integrated Simulation and Improvement of the Multi-bed Methanol Synthesis Process with Syngas Recycling and Energy Recovery in Aspen HYSYS [Volume 22, Issue 3, 2025, Pages 18-33]
Bashiri, Sh. Predicting Kinematic Viscosity and Cetane Number of Diesel- Biodiesel Blend Using Neural Network and Empirical Models [Volume 19, Issue 3, 2022, Pages 81-94]
Basirat, M. Prediction of Vapor-Liquid Equilibria Using CEOS /GE Models [Volume 2, Issue 1, 2005, Pages 71-81]
Basiri, M. Investigation of Liquid–Liquid Two-Phase Flow Pattern in Microreactors for Biodiesel Production [Volume 12, Issue 3, 2015, Pages 32-40]
Basiri, M. Ultrasound-Assisted Biodiesel Production in microreactors [Volume 13, Issue 2, 2016, Pages 22-32]
Bassi, Amarjeet Techno-Economic Assessment of Hydrogen Production from Plastic Waste using Aspen HYSYS [Volume 22, Issue 4, 2025, Pages 3-17]
Bastami, A.R. Rapid Estimation of Water Flooding Performance and Optimization in EOR by Using Capacitance Resistive Model [Volume 9, Issue 4, 2012, Pages 3-16]
Bayandory, L. Investigation of Asphaltene Stability in the Iranian Crude Oils [Volume 5, Issue 1, 2008, Pages 3-12]
Bayat, A. Oil Sorption by Synthesized Exfoliated Graphite (EG) [Volume 5, Issue 1, 2008, Pages 51-64]
Bayat, M. Comparative Study of Two Various Percent of CO Injection Effect to Cascade Methanol Synthesis Reactor in the Presence of Long-term Catalyst Deactivation [Volume 8, Issue 2, 2011, Pages 69-80]
Bayat, M. Investigation of CO Injection Effect on the Methanol Production in a Single Type Reactor in the Presence of Catalyst Deactivation [Volume 7, Issue 3, 2010, Pages 29-48]
Bayat, M. Investigation of Temperature and Flow Fields in an Alternative Design of Industrial Cracking Furnaces Using CFD [Volume 7, Issue 3, 2010, Pages 61-73]
Bayat, Mahdi Enhancement of Hydrogen and Methanol Production using a Double Fluidized-bed Two Membranes Reactor [Volume 13, Issue 3, 2016, Pages 3-18]
Bayat, Mahdi Simultaneous high hydrogen content-synthesis gas production and in-situ CO2 removal via sorption-enhanced reaction process: modeling, sensitivity analysis and multi-objective optimization using NSGA-II algorithm [Volume 13, Issue 4, 2016, Pages 71-95]
Bayati, B. Synthesis and Seeding Time Effect on the Performance of Nanostructure Sodalite Membranes [Volume 4, Issue 1, 2007, Pages 54-70]
Bayati, B. Asymptotic Analysis of Binary Gas Mixture Separation by Nanometric Tubular Ceramic Membranes: Cocurrent and Countercurrent Flow Patterns [Volume 3, Issue 3, 2006, Pages 3-16]
Bazaei, A. Application of affine gray-box neural models for nonlinear control of chemical processes [Volume 3, Issue 1, 2006, Pages 65-76]
Bazargan, M. Dynamic Behavior of an Oil Droplet Adhered to the Wall Surface in a Channel Flow by the Lattice Boltzmann Method [Volume 15, Issue 1, 2018, Pages 35-48]
Bazazzadeh, Zahra Experimental Study and CFD Modeling of Heat Transfer using Boehmite-Water Nanofluid in a Pilot Scale Shell and Tube Heat Exchanger [Volume 21, Issue 4, 2024, Pages 78-93]
Beheshti, A.R. CFD Study of the Turbulent Forced Convective Heat Transfer of Non-Newtonian Nanofluid [Volume 11, Issue 2, 2014, Pages 92-102]
Behin, J. Dissolving Pulp (alpha-cellulose) from Corn Stalk by Kraft Process [Volume 5, Issue 3, 2008, Pages 14-28]
Behin, Jamshid Techno-Economic Assessment of Hydrogen Production from Plastic Waste using Aspen HYSYS [Volume 22, Issue 4, 2025, Pages 3-17]
Behnamfard, A. Flocculation Behavior of Ultrafine Quartz and Magnetite as the Main Mineral Components of Iron Ore Tailings [Volume 18, Issue 2, 2021, Pages 3-18]
Behroozshad, F. Continuous Lumping Model of an Industrial Refinery Isomax Reactor [Volume 7, Issue 2, 2010, Pages 39-50]
Behzadmehr, A. Effects of Vertical Temperature Gradient on Heavy Gas Dispersion in Build up Area [Volume 6, Issue 3, 2009, Pages 26-45]
Beigzadeh, R. Experimental and CFD Study of the Tube Configuration Effect on the Shell-Side Thermal Performance in a Shell and Helically Coiled Tube Heat Exchanger [Volume 12, Issue 2, 2015, Pages 13-25]
Beigzadeh, R. The CFD Provides Data for Adaptive Neuro-Fuzzy to Model the Heat Transfer in Flat and Discontinuous Fins [Volume 16, Issue 2, 2019, Pages 57-69]
Beigzadeh, R. Computational fluid dynamics study and GA modeling approach of the bend angle effect on thermal-hydraulic characteristics in zigzag channels [Volume 16, Issue 3, 2019, Pages 70-83]
Beigzadeh, R. Developing genetic algorithm-based neural networks and sensitivity analysis for thermal conductivity of natural gases [Volume 17, Issue 2, 2020, Pages 44-55]
Beigzadeh, Reza High-Precision Neuro-Fuzzy Modeling of Pressure Loss in Coiled Flow Inverters Using CFD Data [Volume 22, Issue 3, 2025, Pages 3-17]
Bellili, Nadira Valorization of Plant Fiber for the Reinforcement of Thermoplastic Matrix [Volume 22, Issue 2, 2025, Pages 3-11]
Beygi-Khosrowshahi, Y. High-Performance Hydroxyapatite Scaffold Combined with Selenium and Reduced Graphene Oxide for Bone Regeneration Applications [Volume 19, Issue 1, 2022, Pages 66-76]
Bezaatpour, J. Effect of Various Parameters on Emission Factors of Gas Flares [Volume 11, Issue 3, 2014, Pages 59-66]
Bhatia, S. Simple Kinetic Modeling of Selective Reduction of Nitric Oxide in Diesel Exhaust Over Cu-Zn/ZSM-5 Monolithic Catalyst [Volume 7, Issue 3, 2010, Pages 74-80]
Bîrgăuanu, Iuliana Experimental Studies of Surface Tensions for Binary and Ternary Systems of Benzyl Alcohol, N-Hexanol and Water. Modeling with Neural Networks [Volume 21, Issue 1, 2024, Pages 3-16]
Biswas, Sh. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]
Boulaqhi, Shirin Simulation, Control and Experimental Analysis of 1,3Butadiene Purification Unit [Volume 13, Issue 4, 2016, Pages 33-45]
Bozorgian, A. Simultaneous Effects of Ionic Surfactant and Salt on Drop-Interface Coalescence [Volume 6, Issue 4, 2009, Pages 73-86]
C
Chackoshian Khorasani, A. Numerical Analysis of a Simple Mathematical Model to Design Bioremediation System in Rhizosphere [Volume 9, Issue 4, 2012, Pages 65-79]
Chaouki, Jamal A Comparative Study of Machine Learning Methods for Pyrolysis Yield Prediction [Volume 21, Issue 4, 2024, Pages 62-77]
Charpe, Trupti W. Effect of Ethanol Concentration in Ultrasound Assisted Extraction of Glycyrrhizic Acid from Licorice Root [Volume 11, Issue 4, 2014, Pages 21-30]
Chegini, S. CO2 biofixation by Dunaliella Salina in batch and semi-continuous cultivations, using hydrophobic and hydrophilic poly ethylene (PE) hollow fiber membrane photobioreactors [Volume 13, Issue 1, 2016, Pages 47-59]
Cheraghipoor, M. Incorporation of Metal Oxide on Mica Flakes as a Green Pearlescent Pigment: Preparation and Analysis [Volume 17, Issue 2, 2020, Pages 34-43]
Curteanu, Silvia Liquid-liquid equilibrium data prediction using large margin nearest neighbor [Volume 13, Issue 4, 2016, Pages 14-32]
Curteanu, Silvia Experimental Studies of Surface Tensions for Binary and Ternary Systems of Benzyl Alcohol, N-Hexanol and Water. Modeling with Neural Networks [Volume 21, Issue 1, 2024, Pages 3-16]
D
Dabir, B. Modelling and Experimental Study of Wax Deposition in Transportation Line Using a Flow Loop System [Volume 10, Issue 1, 2013, Pages 3-16]
Dabir, B. Sequential formulation for compositional reservoirs simulation using peng robinson equation of state [Volume 3, Issue 1, 2006, Pages 52-64]
Dadban, M. Modification of Montmorillonite and Prediction of Polymer/Clay Affinity Using Surface Properties and Lattice Model [Volume 12, Issue 3, 2015, Pages 41-54]
Dadras, M. Prediction of Surface Tension in Single and Mixed Electrolyte Solutions [Volume 10, Issue 4, 2013, Pages 3-15]
Dairi, Badrina Valorization of Plant Fiber for the Reinforcement of Thermoplastic Matrix [Volume 22, Issue 2, 2025, Pages 3-11]
Dairi, Nassima Valorization of Plant Fiber for the Reinforcement of Thermoplastic Matrix [Volume 22, Issue 2, 2025, Pages 3-11]
Danafar, F. Assessing Nanostarch-Nanoclay Composite Film as a Potentially Durable Environmental-Friendly Packaging Material [Volume 20, Issue 3, 2023, Pages 3-20]
Darvishi, P. A three-dimensional mathematical model for drug delivery from drug-eluting stents [Volume 12, Issue 4, 2015, Pages 15-27]
Das, A. CFD Modeling of the Movement of Bladeless Wind Turbines [Volume 20, Issue 4, 2024, Pages 40-55]
Dashtestani, F. Anticancer and Antioxidant Properties of Ag NPs Coated with BSA NPs [Volume 12, Issue 1, 2015, Pages 22-29]
Dashti, A. Synthesis and Investigation of Stimuli-Responsive Amphiphilic Latex Nanoparticles by Seeded Emulsion Polymerization [Volume 17, Issue 1, 2020, Pages 79-89]
Dastneshan, Ayda Techno-Economic Assessment of Hydrogen Production from Plastic Waste using Aspen HYSYS [Volume 22, Issue 4, 2025, Pages 3-17]
Dave, P.N. Energy Recovery Study for Polyethylene and Cotton by Thermal Plasma Degradation [Volume 10, Issue 3, 2013, Pages 3-13]
Davoodbeygi, Y. Medium Temperature Shift Reaction Over Copper-Ceria catalyst in Fixed-Bed and Microchannel Reactors [Volume 18, Issue 1, 2021, Pages 46-51]
Davoodbeygi, Y. Investigation of the effect of DamKohler and Stanton non-dimensional numbers on the stability of continuous stirred tank reactors [Volume 18, Issue 2, 2021, Pages 48-58]
Davoodbeygi, Y. Simulation and investigation of thermodynamics and energy of methanol purification unit [Volume 19, Issue 3, 2022, Pages 95-107]
Davoodbeygi, Yegane Effect of Nanofluids on the Performance of Shell and Tube, Double Pipe and Plate Heat Exchangers: Simulation and Experimental Evaluations [Volume 22, Issue 1, 2025, Pages 28-41]
Davoodi, A.A. Phase Inversion in a Batch Liquid – Liquid Stirred System [Volume 5, Issue 2, 2008, Pages 55-63]
Daylam Salehi, R. Ternary phase diagram for polymer/ solvent/ supercritical-CO2by sanchez-lacombe model [Volume 3, Issue 2, 2006, Pages 64-72]
Dehestani, M. Stability and Rheological Behavior of Sulfonated Polyacrylamide/ Laponite Nanoparticles Dispersions in Electrolyte Media [Volume 14, Issue 3, 2017, Pages 41-54]
Dehestani, Zohre Optimization of Electrospinning Conditions for the Preparation of Ethyl Cellulose (EC) Nanofibers (NF) Based on the Taguchi Method [Volume 21, Issue 1, 2024, Pages 81-97]
Dehghani, M. R. New Perturbation Model for Prediction of Amino Acid and Peptide Activity Coefficients [Volume 9, Issue 2, 2012, Pages 34-42]
Dehghani, M. R. Observations of Sludge Formation in Group I Base Stock for Lubricants and Thermodynamic Modeling with the SAFT Equation of State [Volume 14, Issue 2, 2017, Pages 33-47]
Dehghani, M.R. Prediction of Surface Tension in Single and Mixed Electrolyte Solutions [Volume 10, Issue 4, 2013, Pages 3-15]
Dehghani, M.R. A Simplified Perturbation Model for Prediction of Mean Ionic Activity Coefficient in Aqueous Electrolyte Solution [Volume 10, Issue 3, 2013, Pages 14-26]
Dehghani Kiadehi, A. Fabrication and Evaluation of Functionalized Nano-titanium Dioxide (F-NanoTiO2)/ polysulfone (PSf) Nanocomposite Membranes for Gas Separation [Volume 11, Issue 4, 2014, Pages 40-49]
Dehghan Lotfabad, A. Bubble formation on a single orifice in a gas solid fluidized bed using digital image analysis [Volume 13, Issue 1, 2016, Pages 60-72]
Dehghanzadeh, Reza Mathematical Modeling and Parameters Optimization of the Degradation of Acrylonitrile in Biofilters [Volume 18, Issue 3, 2021, Pages 3-15]
Dekamin, M. G. Microencapsulation of Ethion by Interfacial Polymerization Utilizing Potassium Phthalimide-N-oxyl (PPINO) as a Promoter [Volume 8, Issue 4, 2011, Pages 34-42]
Delavar, M. Fabrication and characterization of polycarbonate/titanium oxide nanotubes mixed matrix membranes for efficient removal of cadmium and copper from aqueous solution [Volume 14, Issue 2, 2017, Pages 59-73]
Delshad, M. Rapid Estimation of Water Flooding Performance and Optimization in EOR by Using Capacitance Resistive Model [Volume 9, Issue 4, 2012, Pages 3-16]
Derakhshan, A. A. Thermal Stability and Dynamic Mechanical Properties of Nano and Micron-TiO2 Particles Reinforced Epoxy Composites: Effect of Mixing Method [Volume 10, Issue 1, 2013, Pages 16-29]
Derakhshanfard, F. Optimization of Synthesis of Expandable Polystyrene by Multi-Stage Initiator Dosing [Volume 13, Issue 1, 2016, Pages 20-31]
Derakhshanfard, F. Investigating the Influence of Nanoclosite Particles on the Mechanical Properties of Polystyrene Using Artificial Neural Networks [Volume 18, Issue 2, 2021, Pages 59-70]
Dinarvand, Maryam Investigating the Effect of Magnetic Field on the Thermal Conductivity of Ferrofluid Containing Fe3O4 and CoFe2O4 Spinel Ferrite Nanoparticles and Presenting a New Correlation [Volume 21, Issue 4, 2024, Pages 20-36]
Dinarvand, Maryam Effect of Magnet Position on Flow and Thermal Performance of Ferrofluids in a Channel with Constant Wall Heat Flux: A CFD Study [Volume 22, Issue 4, 2025, Pages 29-42]
Din Mohammad, M. Investigation of CO2 and H2O Addition to Natural Gas for Production of Synthesis Gas [Volume 2, Issue 1, 2005, Pages 31-54]
Dorosti, F. A review on the effects of fillers on gas separation Mixed Matrix Membranes [Volume 19, Issue 3, 2022, Pages 3-28]
E
Ebadi, A. Experimental Investigation on the Effect of Parameters Influencing the Performance of a Horizontal Styrene-Water Separator [Volume 9, Issue 3, 2012, Pages 48-54]
Ebadi, A. Batch Separation of Styrene/Ethyl Benzene/Water Dispersions [Volume 7, Issue 4, 2010, Pages 22-28]
Ebadi Amooghin, A. Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]
Ebadi Amooghin, A. The Effect of the Methyl Functional Group on the Physicochemical and Structural Properties of a Synthesized Semi-Aromatic Polyimides [Volume 19, Issue 2, 2022, Pages 89-99]
Ebadi Amooghin, A. 3D simulation of carbon monoxide purification with CuCl(7.0)/AC by pressure swing adsorption process [Volume 19, Issue 4, 2022, Pages 20-37]
Ebrahimi, A. Effect of Mixer Rotational Speed on Heat Transfer Coefficient in Preparation of Nickle Perovskite From Laboratory to Bench Scale [Volume 6, Issue 3, 2009, Pages 71-87]
Ebrahimi, E. Numerical Study of the Fluid Flow and Erosion-Corrosion in an Industrial Valve [Volume 20, Issue 1, 2023, Pages 3-21]
Ebrahimi, Ebrahim Feasibility of the Purification of Pharmaceuticals from Aqueous Solutions using Carbon Nanotubes in the Presence of Oxidizers [Volume 21, Issue 2, 2024, Pages 43-55]
Ebrahimi, Ebrahim CFD Simulation of Hydrogen Sulfide (H2S) Removal from Crude Oil Through an Optimized Cold Stripping Process in a Microchannel [Volume 22, Issue 4, 2025, Pages 18-28]
Ebrahimi, Nadereh GolshanRelationship between the Microstructure and Gas Transport Properties of Polyurethane/Polycaprolactone Blends [Volume 13, Issue 3, 2016, Pages 78-88]
Ebrahimi, Sajjad Optimization of Electrospinning Conditions for the Preparation of Ethyl Cellulose (EC) Nanofibers (NF) Based on the Taguchi Method [Volume 21, Issue 1, 2024, Pages 81-97]
Ebrahimnia-Bajestan, E. Convective Heat Transfer of Nanofluids Flows Through an Isothermally Heated Curved Pipe [Volume 8, Issue 2, 2011, Pages 81-97]
Eftekhardadkhah, M. Influence of Salinity, Surfactants and Power of Ultrasonic Homogenizer on Droplet Size Distribution of Crude Oil/Water Emulsions [Volume 8, Issue 3, 2011, Pages 55-63]
Ehsani, A.R. Dynamic Simulation and Control of Microbial Cell Population in Continuous Bioreactors [Volume 11, Issue 2, 2014, Pages 3-16]
Ehsani, M. R. Modeling and Simulation of Six-Bed Cyclic Adsorption Process Using in Mercaptan Removal from Natural Gas: Non-Isothermal and Non-Adiabatic Conditions [Volume 10, Issue 1, 2013, Pages 67-78]
Ekrami-Kakhki, M. S. Thermal Conductivity of Water Based Nanofluids Containing Decorated Multi Walled Carbon Nanotubes with Different Amount of TiO2 Nanoparticles [Volume 12, Issue 1, 2015, Pages 30-40]
Eltayeb, E. A. Application of ESD and PR+Wong Sandler Mixing Rule Equations of State to Study Methane Hydrate Formation in the Presence of Different Inhibitors [Volume 8, Issue 3, 2011, Pages 16-30]
Eltayeb, E. A. The Effect of Cobalt Naphthenate and 2-benzoylbenzoic Acid on UV-Degradation of LDPE [Volume 8, Issue 3, 2011, Pages 31-42]
Emam Djomeh, Z. Studies of Migration of Styrene Monomer from Polystyrene Packaging into the Food Simulant [Volume 8, Issue 4, 2011, Pages 43-49]
Emami Satellou, A. A. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]
Entezari, K. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering [Volume 18, Issue 1, 2021, Pages 3-15]
Esfandiari, N. Effect of Solvent on the Optimal Thermodynamic Conditions of Ternary System (CO2, Alcohol, Ampicillin) in GAS Process [Volume 17, Issue 1, 2020, Pages 37-46]
Esfandiari, N. Determining the Optimal Thermodynamic Conditions of Ternary Systems Containing (CO2, Solvent, 5-Fluorouracil) in the GAS Process [Volume 19, Issue 1, 2022, Pages 3-14]
Es,Hagi, A. Reduction of fouling in the membrane bioreactor using the combination of electrochemical and adsorbention processees [Volume 20, Issue 2, 2023, Pages 90-107]
Eshratabadi, P. Enhanced Degumming of Soyabean Oil and its Influences on Degummed Oil and Lecithin [Volume 5, Issue 1, 2008, Pages 65-73]
Eslami, F. Instability Analysis of Miscible Displacements in Homogeneous Porous Media [Volume 9, Issue 4, 2012, Pages 25-32]
Esmaeilizadeh Davani, M. Determination of Nusselt Number of Herschel Bulkley Nanofluids by Using CMA-ES Algorithm [Volume 11, Issue 2, 2014, Pages 17-28]
Esmaeilzadeh-Dilmaghani, S. Synthesis and Characterization of Waterglass-Based Silica Aerogel Under Heat Treatment for Adsorption of Nitrate from Water: Batch and Column Studies [Volume 16, Issue 4, 2019, Pages 53-72]
Esmaili, J. Modeling and Simulation of Six-Bed Cyclic Adsorption Process Using in Mercaptan Removal from Natural Gas: Non-Isothermal and Non-Adiabatic Conditions [Volume 10, Issue 1, 2013, Pages 67-78]
Etebarian, M. Prediction of true critical temperature and pressure of binary hydrocarbon mixtures: A Comparison between the artificial neural networks and the support vector machine [Volume 16, Issue 2, 2019, Pages 14-40]
Etemad, S. Gh Newtonian and Non-Newtonian Blood Flow Simulation after Arterial Stenosis- Steady State and Pulsatile Approaches [Volume 1, Issue 2, 2004, Pages 45-53]
Etemad, S. Gh. Numerical Study of Non-Newtonian Flow Through Rectangular Microchannels [Volume 6, Issue 4, 2009, Pages 44-61]
Etemad, S. Gh. Laminar Flow Heat Transfer of a Pseudoplastic Fluid through a Double Pipe Heat Exchanger [Volume 3, Issue 2, 2006, Pages 13-19]
Etemad, S. Gh. Theoretical and Experimental Study of Falling- Cylinder Rheometer [Volume 1, Issue 2, 2004, Pages 19-27]
Etemadi, A. Fractional Calculus Method Applied To the Apple Rings Candying in Osmotic Drying Process [Volume 17, Issue 1, 2020, Pages 90-102]
Etesami, N. Adsorption and Desorption Process of Chromium Ions Using Magnetic Iron Oxide Nanoparticles and Its Relevant Mechanism [Volume 14, Issue 3, 2017, Pages 31-40]
Etesami, N. Effect of Electrohydrodynamic (EHD) on the Drying Rate of Polymer Films Based on the Heat and Mass Transfer [Volume 17, Issue 3, 2020, Pages 41-52]
F
Fadaeerayeni, S. An Egg-Shell Pd-Ag/ α -Al 2 O 3 Catalyst for Tail-End Acetylene Selective Hydrogenation [Volume 11, Issue 1, 2014, Pages 42-54]
Fadaei, Z. Dissolving Pulp (alpha-cellulose) from Corn Stalk by Kraft Process [Volume 5, Issue 3, 2008, Pages 14-28]
Fadhil, S. Modeling of Nanofiltration of Low Concentration Pb(II) Aqueous Solutions Using a Coupled Concentration Polarization and Pore Flow Model [Volume 16, Issue 4, 2019, Pages 12-22]
Fakheri, F. Compartment Mixing Model in a Stirred Tank Equipped Dual Rushton Turbine [Volume 9, Issue 3, 2012, Pages 14-21]
Fakhroleslam, M. Prediction of the Effect of Polymer Membrane Composition in a Dry Air Humidification Process via Neural Network Modeling [Volume 13, Issue 1, 2016, Pages 73-83]
Fakhroleslam, M. Application and Comparison of MAF-66 with AC and CMS in Vacuum Swing Adsorption Process for CO2 Capture from Flue Gas [Volume 20, Issue 4, 2024, Pages 56-72]
Fallah, D. Optimizing of Synthesis of High Purity HMX Using Polyphosphoric Acid by Response Surface Method [Volume 20, Issue 2, 2023, Pages 50-61]
Fallah, Dariush Molecular Dynamics Simulation of Polyether Compatibility with Nitrate Ester Plasticizers: as Anti-Migration Liners [Volume 22, Issue 2, 2025, Pages 35-44]
Fallah, N. Investigation of spent caustic wastewater treatment through response surface methodology and artificial neural network in a photocatalytic reactor [Volume 15, Issue 1, 2018, Pages 46-72]
Fallahdoost Moghadam, S. Investigating the Performance of the Graphene-WO3-TiO2 Ternary Composite in Dye-Sensitized Solar Cells [Volume 20, Issue 4, 2024, Pages 13-26]
Fallahi-Samberan, M. Simulation and optimization of energy in oil storage tanks using nanocomposite of phase change materials by Computational Fluid Dynamics [Volume 20, Issue 2, 2023, Pages 62-86]
Fallahiyekta, M. Convective Heat Transfer Enhancement of CNT-Water Nanofluids in Plain Tube Fitted with Wire Coil Inserts [Volume 11, Issue 2, 2014, Pages 43-55]
Fallahnejad, Somayeh Synthesis of the Poly(Methyl Methacrylate) Brush on the Poly( Vinylidene Fluoride) Membrane via the Surface Initiated Atom Transfer Radical Polymerization [Volume 21, Issue 2, 2024, Pages 74-88]
Fallahzade Abarghoui, Reza Optimization of Electrospinning Conditions for the Preparation of Ethyl Cellulose (EC) Nanofibers (NF) Based on the Taguchi Method [Volume 21, Issue 1, 2024, Pages 81-97]
Famili, M. H. N. Numerical Simulation of the Hydrodynamics of a Two-Dimensional Gas—Solid Fluidized Bed by New Finite Volume Based Finite Element Method [Volume 2, Issue 2, 2005, Pages 22-36]
Fanaei, M. A. Looped Pipeline System for Increasing the Capacity of Natural Gas Transmission [Volume 7, Issue 1, 2010, Pages 76-86]
Farahbod, F. Synthesis of SnO2 and ZnO Nanoparticles and SnO2-ZnO Hybrid for the Photocatalytic Oxidation of Methyl Orange [Volume 12, Issue 3, 2015, Pages 96-105]
Farahzadi, H. Dynamic Evolution of Droplet/Particle Size Distribution in Suspension Polymerization of Styrene [Volume 7, Issue 3, 2010, Pages 49-60]
Faraji, H. CFD Modeling of Hydrocarbon-Air System Hydrodynamics in Three Types of Column Reactors [Volume 17, Issue 1, 2020, Pages 47-64]
Faraji, M . Molecular Simulation of Asphaltene Aggregation in Crude Oil by Monte Carlo Method [Volume 8, Issue 3, 2011, Pages 3-15]
Farajzadeh, S. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
Farajzadeh Bibalan, S. Kinetic Modeling of Sunflower Oil Methanolysis Considering Effects of Interfacial Area of Reaction System [Volume 9, Issue 1, 2012, Pages 50-59]
Faramarzi, S. Simulation and investigation of thermodynamics and energy of methanol purification unit [Volume 19, Issue 3, 2022, Pages 95-107]
Farboodniay Jahromi, M. A. Lactic Acid Fermentation by Different LactobacillusSpecies Using SorghumSeed Extract as Carbon Source [Volume 10, Issue 2, 2013, Pages 3-14]
Farhadi, F. CFD simulation for segregation behavior of a ternary mixture in a bubbling fluidized bed: effect of solid wall boundary condition [Volume 15, Issue 3, 2018, Pages 53-71]
Farhadian, N. Calculation of Physical Properties of the Methanol-Water Mixture Using Molecular Dynamics Simulation [Volume 6, Issue 4, 2009, Pages 62-72]
Farhani, F. Comparative Study on Space Qualified Paints Used for Thermal Control of a Small Satellite [Volume 6, Issue 2, 2009, Pages 50-62]
Farhanian Moghadam, S. Manganese Oxide Promoted LaCoO3 Nano-Perovskite for Oxidation of a Model Exhaust Gas [Volume 9, Issue 2, 2012, Pages 22-33]
Farid Mohammadi, Maryam Investigating the Effective Parameters on purity Purification of Recycled Graphite from Spent Lithium-Ion Batteries [(Articles in Press)]
Faridnia, F. Investigation of Sour Natural Gas Decomposition in a Nozzle-type Solar Reactor for Hydrogen Production [Volume 9, Issue 1, 2012, Pages 40-49]
Faridvand, Ramin Preparation of Flame Retardant Polystyrene via In-Situ Bulk Polymerization Method and Evaluation of its Flammability Properties [Volume 13, Issue 4, 2016, Pages 62-70]
Farmani, Aydin Effect of Nanofluids on the Performance of Shell and Tube, Double Pipe and Plate Heat Exchangers: Simulation and Experimental Evaluations [Volume 22, Issue 1, 2025, Pages 28-41]
Farzam, M. Cavitation Process and the Performance of Some Ferrous and Non-Ferrous Alloys [Volume 5, Issue 1, 2008, Pages 34-50]
Farzaneh, V. Hydroconversion of Furfural over Cu-Cr/SiO2 Nanocatalysts: A Comparative Study [Volume 15, Issue 2, 2018, Pages 38-51]
Farzaneh-gord, M. Uncertainty Reduction of Metering System in Kharg Island Oil Terminal by Adjusting Pipe Line Volume Flow rate [Volume 8, Issue 3, 2011, Pages 64-77]
Farzi, A. Kinetic Study of Methanol to Propylene Process on High Silica H-ZSM5 Catalyst [Volume 10, Issue 4, 2013, Pages 16-27]
Fasihi, M. Effect of silica particles on adhesion strength of polyvinyl chloride coatings on metal substrates [Volume 14, Issue 2, 2017, Pages 74-82]
Fasihi, Mohammad Influence of Polyethylene Glycol on the Morphology and Mechanical Properties of the Eco-Friendly Blends of Polylactic Acid [Volume 22, Issue 2, 2025, Pages 45-64]
Fatehifar, E. Effect of Various Parameters on Emission Factors of Gas Flares [Volume 11, Issue 3, 2014, Pages 59-66]
Fatehifar, E. Synthesis and Characterization of Nanostructured CuO/CeO2 Catalysts via Ultrasound Assisted Techniques used for Selective Oxidation of CO [Volume 10, Issue 3, 2013, Pages 51-59]
Fatehifar, Esmaeil Ultrasonic Assisted Synthesis and Characterization of xCuO/CeO2–γAl2O3 Nanoatalysts [Volume 13, Issue 3, 2016, Pages 43-53]
Fatemi, H. Enhanced Degumming of Soyabean Oil and its Influences on Degummed Oil and Lecithin [Volume 5, Issue 1, 2008, Pages 65-73]
Fatemi, Sh. Application and Comparison of MAF-66 with AC and CMS in Vacuum Swing Adsorption Process for CO2 Capture from Flue Gas [Volume 20, Issue 4, 2024, Pages 56-72]
Fathikalajahi, J. Prediction of Vapor-Liquid Equilibria Using CEOS /GE Models [Volume 2, Issue 1, 2005, Pages 71-81]
Fathi Pirkashani, S. A Model For The Residence Time Distribution and Holdup Measurement in a Two Impinging Streams Cyclone Reactor/Contactor in Solid-Liquid Systems [Volume 3, Issue 3, 2006, Pages 17-28]
Fathizadeh, M. Study of Boundary Layer Convective Heat Transfer with Low Pressure Gradient Over a Flat Plate Via He’s Homotopy Perturbation Method [Volume 9, Issue 1, 2012, Pages 33-39]
Fathollahi, Manoochehr Optimization of the Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide Based Respiratory Air Tablets Using the Taguchi Method [Volume 18, Issue 4, 2021, Pages 81-98]
Fattahi, F. S. A Comprehensive Study on the Kinetics and Thermodynamic Aspects of CI Acid Red 1 Dyeing on Wool [Volume 19, Issue 1, 2022, Pages 33-50]
Fattahi, M. Enhancing Photocatalytic Activity of Nitrogen Doped TiO2 for Degradation of 4-Chlorophenol under Solar Light Irradiation [Volume 15, Issue 3, 2018, Pages 3-14]
Fattahi, M. Metal-Organic Frameworks in Systems of Drug Delivery: Review [Volume 20, Issue 1, 2023, Pages 36-50]
Fattahi, T. Intensification of Azeotropic Distillation for Ethanol Dehydration using Data-based Optimization, Steady-state Simulation and Sensitivity Analysis [Volume 20, Issue 2, 2023, Pages 15-32]
Fatthi, Sohrab Comparing the Performance of Heterogeneous Pd-Supported Catalysts: Pd/ZSM-5, Pd/13X and Pd/Al2O3 for the Hydrogenation of Benzene in a Mixture of Normal Heptane and Benzene [Volume 18, Issue 4, 2021, Pages 3-19]
Fauzi Ismail, A. Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]
Fazeli, A. Mathematical modeling of a fixed bed chromatographic reactor for Fischer Tropsch synthesis [Volume 3, Issue 3, 2006, Pages 51-64]
Fazeli, N. Optimization of Synthesis of Expandable Polystyrene by Multi-Stage Initiator Dosing [Volume 13, Issue 1, 2016, Pages 20-31]
Fazeli, N. Production and Characterization of Gelatine Based Electro-spun Nano-fibres as Burn Wound Dressings [Volume 14, Issue 1, 2017, Pages 3-14]
Fazlali, A. R. New Perturbation Model for Prediction of Amino Acid and Peptide Activity Coefficients [Volume 9, Issue 2, 2012, Pages 34-42]
Fazlali, A.R. A Simplified Perturbation Model for Prediction of Mean Ionic Activity Coefficient in Aqueous Electrolyte Solution [Volume 10, Issue 3, 2013, Pages 14-26]
Fazlollahnejad, M. Study of Surface Tension of Binary Mixtures of Poly (Ethylene Glycol) in Water and Poly (Propylene Glycol) in Ethanol and its Modeling Using Neural Network [Volume 11, Issue 1, 2014, Pages 19-29]
Feyzi, F. Long Range Corrections to the Vapor-Liquid Equilibrium and Surface Tension of Methane with NVT Molecular Dynamics Simulations [Volume 9, Issue 4, 2012, Pages 33-48]
Feyzi, F. Predicting Solubility of Isotactic Poly (1-Butene) in Different Organic Solvents by Modified UNIQUAC [Volume 5, Issue 4, 2008, Pages 39-48]
Feyzi, F. Observations of Sludge Formation in Group I Base Stock for Lubricants and Thermodynamic Modeling with the SAFT Equation of State [Volume 14, Issue 2, 2017, Pages 33-47]
Feyzi, M. An optimization study by response surface methodology (RSM) on viscosity reduction of residue fuel oil exposed ultrasonic waves and solvent injection [Volume 13, Issue 1, 2016, Pages 3-19]
Feyzi, M. Biodiesel production from soybean oil using ionic liquid as a catalyst in a microreactor [Volume 15, Issue 1, 2018, Pages 102-114]
Feyzi, Mostafa Studying the Catalytic Performance, Characterization and Kinetic of SrO-CaO-Al2O3 Nanocatalysts for Producing Biodiesel [Volume 22, Issue 1, 2025, Pages 3-27]
Firoozian, N. Application of Multistage Steam Distillation Column for Extraction of Essential Oil of Valeriana officinialis L. Cultivated in Iran [Volume 10, Issue 4, 2013, Pages 79-84]
Foroozesh, J. Simulation of Water Coning in Oil Reservoirs Using a Corrected IMPES Method [Volume 5, Issue 4, 2008, Pages 3-11]
Foruzanfar, R. Stability and Rheological Behavior of Sulfonated Polyacrylamide/ Laponite Nanoparticles Dispersions in Electrolyte Media [Volume 14, Issue 3, 2017, Pages 41-54]
G
Ganji, Fariba Transdermal Delivery of Desmopressin Acetate from Water-in- Oil Nano/submicron Emulsion Systems [Volume 13, Issue 4, 2016, Pages 1-13]
Ganjizade, A. Demuification of Water-in-Oil Emulsions by Means of Dielectrophoresis [Volume 17, Issue 3, 2020, Pages 24-40]
Ghaderi, A. Synthesis of SnO2 and ZnO Nanoparticles and SnO2-ZnO Hybrid for the Photocatalytic Oxidation of Methyl Orange [Volume 12, Issue 3, 2015, Pages 96-105]
Ghaderi, E. Experimental Study and CFD Modeling of the Ohmic Heating Process in a Static Two-Phase Biosolid – Liquid System [Volume 12, Issue 2, 2015, Pages 75-87]
Ghadi, A. CFD Study of Concave Turbine [Volume 16, Issue 2, 2019, Pages 103-118]
Ghaemi, A. Dynamic Simulation and Control of Microbial Cell Population in Continuous Bioreactors [Volume 11, Issue 2, 2014, Pages 3-16]
Ghaemi, A. Uranium Extraction from Solid Waste as Nitrate Complex with D2EHPA, TOPO and their Synergistic Mixture [Volume 10, Issue 4, 2013, Pages 28-42]
Ghaemi, A. Mathematical Modeling for Volatile Organic Compounds Removal in a Biofilter: Model Validation and Sensitivity Analysis [Volume 10, Issue 3, 2013, Pages 76-87]
Ghaemi, A. Nonequilibrium Dynamic Modeling of Hydrogen Sulfide Absorption Using Diglycolamine Solution [Volume 10, Issue 1, 2013, Pages 45-54]
Ghaemi, A. Prediction of Red Mud Bound-Soda Losses in Bayer Process Using Neural Networks [Volume 13, Issue 2, 2016, Pages 46-56]
Ghaemi, A. Experimental, Kinetics and Isotherm Modeling of Carbon Dioxide Adsorption with 13X Zeolite in a fixed bed column [Volume 16, Issue 1, 2019, Pages 54-64]
Ghaemi, Ahad Evaluation of the Silica Gel Adsorbent Potential for Carbon Dioxide Capture: Experimental and Modeling [Volume 18, Issue 4, 2021, Pages 64-80]
Ghaemmaghami, F. Seed Coat Soybean Peroxidase: Extraction and Biocatalytic Properties Determination [Volume 7, Issue 2, 2010, Pages 28-38]
Ghaffari, H. R. Degradation of Azo Dye Reactive Black 5 and Acid Orange 7 by Fenton-Like Mechanism [Volume 7, Issue 1, 2010, Pages 87-94]
Ghafoori, Sepideh Effect of Synthesis Method and Nickel-Copper Loading on Ni-Cu-Al Catalysts for Production of Hydrogen Via Ethanol Steam Reforming [Volume 21, Issue 1, 2024, Pages 51-61]
Ghaheri, L. Biofouling Behavior on Forward Osmosis Using Vertically Aligned CNT Membrane on Alumina [Volume 16, Issue 2, 2019, Pages 1-13]
Ghanadi Maragheh, M. The Effects of Operational Parameters on the Efficiency of a Mixer-Settler Extractor [Volume 2, Issue 1, 2005, Pages 10-23]
Ghanadzadeh, A. Dielectric Study on Polar Binary Mixtures of (Ester-Alcohol) at 298.2 K [Volume 9, Issue 3, 2012, Pages 22-30]
Ghanadzadeh, H. Dielectric Study on Polar Binary Mixtures of (Ester-Alcohol) at 298.2 K [Volume 9, Issue 3, 2012, Pages 22-30]
Ghanbari Pakdehi, Sh. An Empirical Correlation to Predict the Ignition Delay Time for Some Hydrocarbon Fuels [Volume 13, Issue 1, 2016, Pages 84-97]
Ghanbari Pakdehi, Shahram Investigating the Effective Parameters on purity Purification of Recycled Graphite from Spent Lithium-Ion Batteries [(Articles in Press)]
Ghanbarnezhad, M. Synthesize and application of Fe3O4/MW-CNT Composite in photo-catalyst-assisted electrochemical oxidation of BTX compounds from wastewater [Volume 20, Issue 1, 2023, Pages 54-66]
Ghanbarnezhad, Mohammad Synthesize and Application of Fe3O4/MW-CNT Composite in Photo-Catalyst Assisted Electrochemical Oxidation of BTX Compounds from Wastewater [Volume 21, Issue 4, 2024, Pages 3-19]
Ghannadi Maragheh, M. The Experimental Study of Effective Parameters on Mean Drop Size in a Mixer-Settler [Volume 8, Issue 1, 2011, Pages 38-45]
Gharemanlou, Mobin Investigating the Effective Parameters on purity Purification of Recycled Graphite from Spent Lithium-Ion Batteries [(Articles in Press)]
Ghasemi, Ismaeil Polysulfone/ Carbon Nanotubes Asymmetric Nanocomposite Membranes: Effect of Nanotubes Surface Modification on Morphology and Water Permeability [Volume 12, Issue 4, 2015, Pages 69-83]
Ghasemi, M. Synthesis of a high characteristics activated carbon from walnut shell for the removal of Cr (VI) and Fe (II) from aqueous solution: single and binary solutes adsorption [Volume 12, Issue 4, 2015, Pages 28-51]
Ghasemi, S. Flocculation Behavior of Ultrafine Quartz and Magnetite as the Main Mineral Components of Iron Ore Tailings [Volume 18, Issue 2, 2021, Pages 3-18]
GhasemiKafrudi, E. Application of Turbo-Expander for Greenhouse Gas and Air Pollutant Emissions Reduction Using Exergy and Economical Analysis [Volume 14, Issue 4, 2017, Pages 32-47]
Ghasemkhani, Hamid Drying Apple Slices in a Rotating-Tray Convective Dryer: A Study on Dehydration Characteristics and Qualitative Attributes [Volume 18, Issue 3, 2021, Pages 16-32]
Ghashghaee, M. Hydroconversion of Furfural over Cu-Cr/SiO2 Nanocatalysts: A Comparative Study [Volume 15, Issue 2, 2018, Pages 38-51]
Ghavami, M. Enhanced Degumming of Soyabean Oil and its Influences on Degummed Oil and Lecithin [Volume 5, Issue 1, 2008, Pages 65-73]
Ghavipanjeh, F. Dynamic Modeling of Granular Sludge in UASB Reactors [Volume 2, Issue 1, 2005, Pages 52-60]
Ghavipanjeh, F. Treatment of Tehran Refinery Effluents in UASB Reactors [Volume 1, Issue 2, 2004, Pages 3-10]
Ghavipanjeh*, F. Biological Conversion of Normal Chain Octadecane by Native Microbial Consortia [Volume 12, Issue 2, 2015, Pages 50-58]
Ghazanchaie, S. Investigating the Influence of Nanoclosite Particles on the Mechanical Properties of Polystyrene Using Artificial Neural Networks [Volume 18, Issue 2, 2021, Pages 59-70]
Ghazitabatabaei, Z. Studying the Influence of the Mixing Speed of the Polymer Blend of General-Purpose Polystyrene and Acrylonitrile-Butadiene Styrene with the Applications of Artificial Neural Networks [Volume 17, Issue 4, 2020, Pages 21-32]
Ghiasi, M. Manganese Oxide Promoted LaCoO3 Nano-Perovskite for Oxidation of a Model Exhaust Gas [Volume 9, Issue 2, 2012, Pages 22-33]
Ghiassimehr, B. Removal of Pb (II) From Wastewater Using Henna; Optimization of Operational Conditions [Volume 15, Issue 4, 2018, Pages 17-26]
Ghiyami, T. Comparative Study of Two Various Percent of CO Injection Effect to Cascade Methanol Synthesis Reactor in the Presence of Long-term Catalyst Deactivation [Volume 8, Issue 2, 2011, Pages 69-80]
Ghobadi, F. Developing Collagen Hydrogel Including Bioactive Glass Nanoparticles for being used in Bone Tissue Engineering [Volume 20, Issue 4, 2024, Pages 3-12]
Ghobadian, B. Conceptual Design of a Batch Process for the Production of Biodiesel from High Free Fatty Acid Feedstocks [Volume 19, Issue 1, 2022, Pages 15-32]
Ghobadian, Barat Techno-Economic Optimization of a Continuous Process for the Biodiesel Production from Waste Vegetable Oils [Volume 18, Issue 4, 2021, Pages 20-35]
Ghodbanan, Sh. Thermodynamic and Heat Transfer Evaluation of Pocket Drying Section in the Multi-Cylinder Dryers of Paper Machine [Volume 13, Issue 2, 2016, Pages 57-70]
Gholipour-Zanjani, N. Enhanced Degumming of Soyabean Oil and its Influences on Degummed Oil and Lecithin [Volume 5, Issue 1, 2008, Pages 65-73]
Ghorbani, Davoud Investigation of Operation Life on Catalyst of Acetylene Hydrogenation Reactor – An Industrial Study [Volume 22, Issue 1, 2025, Pages 42-53]
Ghorbani, H. Modeling of Vibration of a Fluidized Bed Cylindrical Shell [Volume 10, Issue 2, 2013, Pages 67-80]
Ghorbani, Y. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
Ghorbanian, S. Effect of graphite oxidation on the yield and quality of graphene synthesized by supercritical exfoliation and its application in photocatalytic degradation of methylene blue [Volume 12, Issue 4, 2015, Pages 52-68]
Ghorbanzadeh, M. Comparison of the Performance of Different Thermodynamic Models for Liquid Phase in Predicting the Phase Behavior of Hydrogen Hydrates with THF [Volume 10, Issue 4, 2013, Pages 65-78]
Ghoreyshi, A. A. Fabrication and Evaluation of Functionalized Nano-titanium Dioxide (F-NanoTiO2)/ polysulfone (PSf) Nanocomposite Membranes for Gas Separation [Volume 11, Issue 4, 2014, Pages 40-49]
Ghoreyshi, A. A. Adsorption of Volatile Organic Compounds from Aqueous Solution by Granular Activated Carbon (GAC) in Batch System [Volume 8, Issue 4, 2011, Pages 50-56]
Ghoreyshi, A. A. Synthesis of a high characteristics activated carbon from walnut shell for the removal of Cr (VI) and Fe (II) from aqueous solution: single and binary solutes adsorption [Volume 12, Issue 4, 2015, Pages 28-51]
Ghoreyshi, A. A. Extraction of pectin from sour orange and its application as the adsorbent for removal of nickel from aqueous solution: Kinetic and equilibrium study [Volume 15, Issue 2, 2018, Pages 3-21]
Ghoreyshi, A.A. Effect of Polymer Concentr ation on the Structure and Performance of Polysulf one Flat Membrane for CO 2 Absorption in Membrane Contactor [Volume 11, Issue 2, 2014, Pages 78-91]
Ghoreyshi, A.A. Optimization of solvothermally synthesized ZIF-67 metal organic framework and its application for Cr(VI) adsorption from aqueous solution [Volume 15, Issue 4, 2018, Pages 27-47]
Ghotbi, C. Comparison of the Performance of Different Thermodynamic Models for Liquid Phase in Predicting the Phase Behavior of Hydrogen Hydrates with THF [Volume 10, Issue 4, 2013, Pages 65-78]
Ghotbi, C. On the Selection of Proper Thermodynamic Conditions for the Gas Antisolvent Process (GAS) at Nearcritical and Supercritical Conditions [Volume 3, Issue 4, 2006, Pages 17-22]
Ghourchian, H. Anticancer and Antioxidant Properties of Ag NPs Coated with BSA NPs [Volume 12, Issue 1, 2015, Pages 22-29]
Ghozatloo, A. Preparation of MWNT/TiO2 Nanofluids and Study of its Thermal Conductivity and Stability [Volume 11, Issue 4, 2014, Pages 3-9]
Ghozatloo, A. Effect of Single Walled Carbon Nanotubes on Natural Gas Hydrate Formation [Volume 11, Issue 3, 2014, Pages 67-73]
Gilani, N. An Investigation of Indirect Evaporative Coolers, IEC With Respect to Thermal Comfort Criteria [Volume 6, Issue 2, 2009, Pages 14-28]
Gilani, N. Investigating the Performance of the Graphene-WO3-TiO2 Ternary Composite in Dye-Sensitized Solar Cells [Volume 20, Issue 4, 2024, Pages 13-26]
Godini, H. R. Characterization of Lithium Ion Transport Via Dialysis Process [Volume 3, Issue 4, 2006, Pages 35-43]
Goharrokhi, Mahdi Experimental Measurement and Thermodynamic Modeling of CO2 Absorption in a Wide Range of Aqueous MDEA Solutions (10-98 wt%) [Volume 21, Issue 3, 2024, Pages 14-33]
Golabi, E. Chemical Induced Wettability Alteration of Carbonate Reservoir Rocks [Volume 6, Issue 1, 2009, Pages 66-73]
Golhosseini, R. Optimization of the homogeneous rhodium-catalyzed methanol carbonylation reactor to reduce CO2 emissions [Volume 19, Issue 3, 2022, Pages 50-68]
Golsefatan, H. R. Dynamic Simulation of an Industrial Rotary Dryer [Volume 7, Issue 2, 2010, Pages 68-77]
Golshan, Shahab Investigation of Solid Mixing in a Spherical Triaxe Mixer Using the Discrete Element Method [Volume 22, Issue 2, 2025, Pages 12-34]
Gomaa, E. Cyclic Voltammetry of Cobalt Chloride with L- Carrageenan (LK) Using Glassy Carbon Electrode [Volume 14, Issue 4, 2017, Pages 90-99]
Goodarzi, P. Kinetics of Propane Hydrate Formation in Agitated Reactor: A Mass Transfer Approach [Volume 14, Issue 2, 2017, Pages 48-58]
Gulcan, E. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
H
Habibi, Al.R. Synthesis the Bioactive Conjugates of Nisin-Xanthan through the Maillard Reaction at Moderate Temperature [Volume 20, Issue 1, 2023, Pages 78-91]
Habibi, A. R. Optimization of cultivation conditions of Candida catenulata in synthesizing acidic sophorolipid [Volume 20, Issue 3, 2023, Pages 54-69]
Habibi, A.R. CFD Modeling of Hydrocarbon-Air System Hydrodynamics in Three Types of Column Reactors [Volume 17, Issue 1, 2020, Pages 47-64]
Habibi, M. R. Application of Turbo-Expander for Greenhouse Gas and Air Pollutant Emissions Reduction Using Exergy and Economical Analysis [Volume 14, Issue 4, 2017, Pages 32-47]
Habibpoor, M. Methane Combustion and CO Oxidation on Ag-Doped LaMn0.8Cu0.2O3±δ Mixed Oxides Prepared by Pechini and Sol–Gel Methods [Volume 9, Issue 3, 2012, Pages 31-47]
Hadi, A. Effect of graphite oxidation on the yield and quality of graphene synthesized by supercritical exfoliation and its application in photocatalytic degradation of methylene blue [Volume 12, Issue 4, 2015, Pages 52-68]
Hadi, N. Kinetic Study of Methanol to Propylene Process on High Silica H-ZSM5 Catalyst [Volume 10, Issue 4, 2013, Pages 16-27]
Hadi, N. CFD modeling for selective formation of propylene from methanol over synthesized Mn-substituted MFI metallosilicate catalyst [Volume 15, Issue 2, 2018, Pages 22-37]
Hadidi, A. Simulation and optimization of energy in oil storage tanks using nanocomposite of phase change materials by Computational Fluid Dynamics [Volume 20, Issue 2, 2023, Pages 62-86]
Hadi Najafabadi, Hossein Three-dimensional CFD modeling of fluid flow and heat transfer characteristics of Al2O3/water nanofluid in microchannel heat sink with Eulerian-Eulerian approach [Volume 13, Issue 4, 2016, Pages 46-61]
Hadipour, A. Determination of the Kinetic Parameters and Dynamic Modeling of the Reactor for the Direct Conversion of Synthesis gas to Di-methyl ether [Volume 3, Issue 4, 2006, Pages 23-34]
Haghighi, M. Investigation of CO Injection Effect on the Methanol Production in a Single Type Reactor in the Presence of Catalyst Deactivation [Volume 7, Issue 3, 2010, Pages 29-48]
Haghighi, Mohammad Preparation of SAPO-34 Molecular Sieve Dual Template Using TEA and Morpholine: Influence of Crystallization Times on Catalyst Characteristics and Activity in the MTO Process [Volume 22, Issue 3, 2025, Pages 78-96]
Haghighiasl, A. Investigation of spent caustic wastewater treatment through response surface methodology and artificial neural network in a photocatalytic reactor [Volume 15, Issue 1, 2018, Pages 46-72]
Haghshenasfard, M. CFD Simulations of Pressure Drop in KATAPAK-S Structured Packing [Volume 2, Issue 2, 2005, Pages 64-71]
Haghshenas Fard, M. Characterization of Copper-Manganese Oxide Catalysts and Their Precursors: Effect of Precipitate Aging upon the Structure and Morphology of Precursors and Catalysts [Volume 1, Issue 2, 2004, Pages 11-18]
Hajghani, Somayeh Modification of the Isomerization Process to Improve Research Octane Number [Volume 21, Issue 3, 2024, Pages 66-82]
Hajiabadi, M. CFD Modeling of the Dehydration of Biofuels with the 2D MXene Membrane using the Pervaporation Process [Volume 19, Issue 1, 2022, Pages 77-89]
Hajilary, N. CFD Modeling of the Dehydration of Biofuels with the 2D MXene Membrane using the Pervaporation Process [Volume 19, Issue 1, 2022, Pages 77-89]
Hajimohammadi, A. On the Selection of Proper Thermodynamic Conditions for the Gas Antisolvent Process (GAS) at Nearcritical and Supercritical Conditions [Volume 3, Issue 4, 2006, Pages 17-22]
Hajimohammadi, Reza Synthesis and Characterization of Doxorubicin Coated with Magnetic Copolymer Polycaprolactone-Polyethylene Glycol for Use in the Cancer Treatment [Volume 18, Issue 4, 2021, Pages 36-48]
Hamedani, Y. Production and Characterization of Gelatine Based Electro-spun Nano-fibres as Burn Wound Dressings [Volume 14, Issue 1, 2017, Pages 3-14]
Hamed Mosavian, H. T. Use of Agricultural Waste for Removal of Cr(VI) from Aqueous Solution [Volume 8, Issue 4, 2011, Pages 11-23]
Hamidi, A. A. Preparation of MWNT/TiO2 Nanofluids and Study of its Thermal Conductivity and Stability [Volume 11, Issue 4, 2014, Pages 3-9]
Hamidian, H. Stability and Rheological Behavior of Sulfonated Polyacrylamide/ Laponite Nanoparticles Dispersions in Electrolyte Media [Volume 14, Issue 3, 2017, Pages 41-54]
Hanon, K.H. Numerical Study of the Fluid Flow and Erosion-Corrosion in an Industrial Valve [Volume 20, Issue 1, 2023, Pages 3-21]
Haque, P. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]
Hasan, M. M. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]
Hasanzadeh, R. Simulation of Leaching of Starch from Potato in a Batch Extractor [Volume 12, Issue 2, 2015, Pages 26-36]
Hashemabadi, H. Prediction of Red Mud Bound-Soda Losses in Bayer Process Using Neural Networks [Volume 13, Issue 2, 2016, Pages 46-56]
Hashemabadi, S. H. Influence of Salinity, Surfactants and Power of Ultrasonic Homogenizer on Droplet Size Distribution of Crude Oil/Water Emulsions [Volume 8, Issue 3, 2011, Pages 55-63]
Hashemabadi, S.H. A New Correlation for Drag Coefficient of Extrudate Quadralobe Particles by CFD Simulation [Volume 11, Issue 3, 2014, Pages 26-36]
Hashemabadi, S.H. Reduction of Parasitic Currents in Simulation of Droplet Secondary Breakup with Density Ratio Higher than 60 by InterDyMFoam [Volume 11, Issue 2, 2014, Pages 29-42]
Hashemi, H. Prediction of Liquid-Liquid Equilibria of Binary Systems Containing Alcohols Using EoS-GE Models [Volume 7, Issue 4, 2010, Pages 12-21]
Hashemi, J. Experimental study of the shape and motion of flattened drops in a Hele-Shaw Cell [Volume 3, Issue 4, 2006, Pages 3-16]
Hashemi, S. CFD Modeling of the Dehydration of Biofuels with the 2D MXene Membrane using the Pervaporation Process [Volume 19, Issue 1, 2022, Pages 77-89]
Hashemi-Najafabadi, S. Assessment of Bioavailability of Crude Oil in Three Different Agricultural Soils [Volume 12, Issue 1, 2015, Pages 3-12]
Hashemipour Rafsanjani, H. Study on Pore and Surface Development of Activated Carbon Produced from Iranian Coal in a Rotary Kiln Reactor [Volume 10, Issue 3, 2013, Pages 27-38]
Hashemipour Rafsanjani, H. Study of Carbon Black Production with Optimized Feed to Predict Product Particle Size [Volume 4, Issue 1, 2007, Pages 36-42]
Hashemipour Rafsanjani, H. Methane oxy-steam reforming over a highly efficient Ni/Al2O3 nanocatalyst prepared by microwave-assisted impregnation method [Volume 14, Issue 4, 2017, Pages 3-16]
Hashtroudi, M. S. Removal of Surfactants from wastewater by Rice Husk [Volume 3, Issue 3, 2006, Pages 44-50]
Hassanajili, Sh. Improvement of gas separation properties of polyurethane membrane using plasma grafting [Volume 14, Issue 3, 2017, Pages 19-30]
Hassanisadi, M. Effect of Single Walled Carbon Nanotubes on Natural Gas Hydrate Formation [Volume 11, Issue 3, 2014, Pages 67-73]
Hassanpour souderjani, H. Oxidative desulfurization of petroleum products using decorated cobalt oxide on the surface of modified carbon nanotubes-ICHEC-1887 [Volume 18, Issue 1, 2021, Pages 36-45]
Hassim, M. H. An AHP-Delphi Multi-Criteria Decision Making Model with Application to Environmental Decision-Making [Volume 8, Issue 2, 2011, Pages 3-17]
Hassimi, A. Unsteady-State Modeling of the Fluidized Bed Polyethylene Reactor [Volume 6, Issue 1, 2009, Pages 23-39]
Hatami, T. Vetiver Oil Extraction Optimization Using Supercritical Carbon Dioxide Fluid [Volume 7, Issue 4, 2010, Pages 64-70]
Hatamipour, M. SadeghTheoretical study of multi-stage and multi-feeding variable pressure humidification-dehumidification (VP-HD) desalination systems [Volume 21, Issue 1, 2024, Pages 17-29]
Hatamipour, Mohammad SadeghUltrasonic Distillation of Ethanol-Water Mixtures: Optimization Using Response Surface Methodology (RSM) [Volume 22, Issue 1, 2025, Pages 87-102]
Hatamipour, M. S. Lactic Acid Fermentation by Different LactobacillusSpecies Using SorghumSeed Extract as Carbon Source [Volume 10, Issue 2, 2013, Pages 3-14]
Hatamipour, M. S. Effect of Drying Conditions on Properties of Dried Sugar Beet [Volume 7, Issue 3, 2010, Pages 81-87]
Hatamipour, M.S. Analysis of the Effective Parameters on Potato Powder Quality Produced by a Spray Dryer [Volume 9, Issue 3, 2012, Pages 55-62]
Hazrati, H. Fe3O4 Magnetic Nanoparticles/ Graphene Oxide Nanosheets/Carbon Cloth as an Electrochemical Sensing Platform [Volume 16, Issue 2, 2019, Pages 95-102]
Hazrati, H. Reduction of fouling in the membrane bioreactor using the combination of electrochemical and adsorbention processees [Volume 20, Issue 2, 2023, Pages 90-107]
Hedayat, N. Experimental Study of Phase Inversion in n-Butylacetate-Water, Kerosene-Water, and n-Heptane-Water Systems in a Rotating Disc Contactor Column [Volume 8, Issue 4, 2011, Pages 57-64]
Hedayat, N. Phase Inversion in a Batch Liquid – Liquid Stirred System [Volume 5, Issue 2, 2008, Pages 55-63]
Hefzi Lotfabadi, Mahdi Investigating the Performance of an Ultrasound-Assisted Rotating Packed Bed Reactor for the Enhancement of the Micromixing Efficiency [Volume 18, Issue 4, 2021, Pages 49-63]
Heidari, A. Effect of Different Nucleation and Growth Kinetic Terms on Modeling Results of KNO3 CMSMPR Crystallizer [Volume 10, Issue 1, 2013, Pages 79-91]
Heidari, A. Determination of the Equilibrium Parameters of Gaseous Detonations Using a Genetic Algorithm [Volume 5, Issue 3, 2008, Pages 3-13]
Heidari, N. Cooling Enhancement of a Photovoltaic Panel Through Ferrofluid Stimulation Using a Magnetic-Wind Turbine [Volume 16, Issue 4, 2019, Pages 35-52]
Heidarinejad, G. A New Model for Prediction of Heat Eddy Diffusivity in Pipe Expansion Turbulent Flows [Volume 2, Issue 1, 2005, Pages 24-33]
Hejazi, M.A. CO2 biofixation by Dunaliella Salina in batch and semi-continuous cultivations, using hydrophobic and hydrophilic poly ethylene (PE) hollow fiber membrane photobioreactors [Volume 13, Issue 1, 2016, Pages 47-59]
Hejazi, P. Evaluation of Effective Strategies for Cultivation of Acidithiobacillus Thiooxidans as Cement-Degrading Bacteria [Volume 10, Issue 2, 2013, Pages 55-66]
Hejazi, P. Screening Effective Factors in Slurry Phase Bioremediation of 2,4,6-Trinitrotoluene (TNT) Contaminated Soil [Volume 8, Issue 2, 2011, Pages 29-40]
Hejazi, P. A Microcosm Study on P-Nitrophenol Biodegradation in Soil Slurry by Alcaligenes faecalis: Plackett-Burman Design [Volume 8, Issue 2, 2011, Pages 57-68]
Hejazi, P. Assessment of effective factors on bacterial oxidation of ferrous iron by focusing on sweetening natural gas [Volume 15, Issue 1, 2018, Pages 18-34]
Hemmati, A. Comparison of Different Methods (Digestion, Combustion, Gasification and Pyrolysis) for Sludge Energy Recovery: A Case Study for Ekbatan’s Municipal Treatment Plant [Volume 16, Issue 1, 2019, Pages 70-83]
Hemmati, A. Groundwater Denitrification by Using MBBR With KMT Packing [Volume 17, Issue 4, 2020, Pages 60-68]
Hemmati, A. Study of the Industrial Wastewater Treatment by a Membrane Bioreactor (MBR) Case Study: Cookie Factory Wastewater [Volume 17, Issue 3, 2020, Pages 74-84]
Hemmati, Azadeh Assessing the Impact of Hydraulic Retention Time and Sawdust on the Elimination of Pb and Co from Oily Wastewater via Vertical-Flow Constructed Wetlands (VFCWs) with Phragmites Australis Cultivation [Volume 21, Issue 1, 2024, Pages 66-80]
Hemmati, H. Theoretical and Empirical Equilibrium Concentration for the Dry Reforming of Methane [Volume 18, Issue 2, 2021, Pages 31-47]
Hemmati, Hamed Investigating the Activity of the Supported Bimetallic Ni-Co Catalysts on the Dry Reforming of Methane [Volume 18, Issue 3, 2021, Pages 63-73]
Hendi, S. S. Modelling and Experimental Study of Wax Deposition in Transportation Line Using a Flow Loop System [Volume 10, Issue 1, 2013, Pages 3-16]
Heravi, Malihe Simultaneous high hydrogen content-synthesis gas production and in-situ CO2 removal via sorption-enhanced reaction process: modeling, sensitivity analysis and multi-objective optimization using NSGA-II algorithm [Volume 13, Issue 4, 2016, Pages 71-95]
Heydarinasab, A. Optimization of Synthesis of Expandable Polystyrene by Multi-Stage Initiator Dosing [Volume 13, Issue 1, 2016, Pages 20-31]
Heydarinasab, A. Microfluidic extraction of tannic acid from Quercus leaves [Volume 15, Issue 3, 2018, Pages 15-33]
Hoorijani, H. Effect of Isopropanol on the Fluidization of Hydrophilic Titanium Nano-Powder [Volume 19, Issue 2, 2022, Pages 51-67]
Hormozi, Faramarz Laboratory Study of Silicate-Polymer Gel System for Water Shut-off in Hydrocarbon Reservoirs [Volume 22, Issue 1, 2025, Pages 54-66]
Hoseini, S. SHAHAB-A PC-Based Software for Simulation of Steam Cracking Furnaces (Ethane and Naphtha) [Volume 1, Issue 2, 2004, Pages 55-70]
Hoshyar, N. Copper Catalysts Supported on CeMnO2 for CO Oxidation in Hydrogen-Rich Gas Streams [Volume 12, Issue 3, 2015, Pages 3-14]
Hosseini, F. Propionic acid extraction in a microfluidic system: simultaneous effects of channel diameter and fluid flow rate on the flow regime and mass transfer [Volume 15, Issue 4, 2018, Pages 48-62]
Hosseini, M. Fabrication and characterization of polycarbonate/titanium oxide nanotubes mixed matrix membranes for efficient removal of cadmium and copper from aqueous solution [Volume 14, Issue 2, 2017, Pages 59-73]
Hosseini, M. Optimization and Comparison of Ni and Cd Removal Using Zinc Powder with the Response Surface Methodology [Volume 17, Issue 4, 2020, Pages 3-20]
Hosseini, M. Investigation of the effect of DamKohler and Stanton non-dimensional numbers on the stability of continuous stirred tank reactors [Volume 18, Issue 2, 2021, Pages 48-58]
Hosseini, S. A. Abatement of Benzyl Alcohol and Methyl Ethyl Ketone (MEK) from Polluted Air Over Nanostructured Mn -Supported Alumina Catalyst [Volume 8, Issue 1, 2011, Pages 31-37]
Hosseini, S. A. CFD Simulation of Catalytic Combustion of Benzene [Volume 6, Issue 4, 2009, Pages 34-44]
Hosseini, S. A. A Study of Catalytic Performance of Co3O4 and Cu-Co Nano Metal Oxides in Combustion of Aromatics [Volume 14, Issue 2, 2017, Pages 83-90]
Hosseini, SayedMohsen Diazonium-Based Surface Functionalization of PES Nanofiltration Membranes for Improved Antifouling Properties and Heavy Metal Removal [(Articles in Press)]
Hosseini, Seyyed Ghorban Optimization of the Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide Based Respiratory Air Tablets Using the Taguchi Method [Volume 18, Issue 4, 2021, Pages 81-98]
Hosseini, S. M. S. Methane oxy-steam reforming over a highly efficient Ni/Al2O3 nanocatalyst prepared by microwave-assisted impregnation method [Volume 14, Issue 4, 2017, Pages 3-16]
Hosseini, Z. Intensification of Azeotropic Distillation for Ethanol Dehydration using Data-based Optimization, Steady-state Simulation and Sensitivity Analysis [Volume 20, Issue 2, 2023, Pages 15-32]
Hosseini, Z. S. Synthesis and Investigation of Stimuli-Responsive Amphiphilic Latex Nanoparticles by Seeded Emulsion Polymerization [Volume 17, Issue 1, 2020, Pages 79-89]
Hosseini-Jenab, M. Experimental Investigation on the Solubility and Initial Rate of Absorption of CO2 in Mixture of Amine-Functionalized Ionic Liquids and Physical Solvents [Volume 12, Issue 1, 2015, Pages 68-77]
Hosseini-Jenab, M. Thermo Physical Properties of Some Physical and Chemical Solvents at Atmospheric Pressure [Volume 10, Issue 4, 2013, Pages 43-54]
Hosseini-Nasab, Seyed Mojtaba Laboratory Study of Silicate-Polymer Gel System for Water Shut-off in Hydrocarbon Reservoirs [Volume 22, Issue 1, 2025, Pages 54-66]
Hosseini-Nasab, Seyed Mojtaba Enhancing Water Shut-Off in Oil Reservoirs Using Silica Nanoparticle-Reinforced Polymer Gels: A Lab Study [Volume 22, Issue 2, 2025, Pages 65-85]
Hosseinnia, A. Photocatalytic Decomposition of Epichlorohydrin by TiO 2 /Ag Coated Sintered Glass Filters [Volume 11, Issue 1, 2014, Pages 69-74]
Hosseinnia, A. Anaerobic Bioconversion of Heavy Hydrocarbons Using Native Consortia [Volume 6, Issue 1, 2009, Pages 40-49]
Hosseinnia, A. Biological Conversion of Normal Chain Octadecane by Native Microbial Consortia [Volume 12, Issue 2, 2015, Pages 50-58]
Hosseinnia, A. Removal of Surfactants from wastewater by Rice Husk [Volume 3, Issue 3, 2006, Pages 44-50]
Hosseinnia, A. Decolorization of Distillery Wastewater by UV irradiated spores of Aspergillus fumigatus [Volume 2, Issue 2, 2005, Pages 49-55]
Houshyar, Sh. Stochastic Comparisons of Probability Distribution Functions with Experimental Data in a Liquid-Liquid Extraction Column for Determination of Drop Size Distributions [Volume 14, Issue 3, 2017, Pages 82-95]
Hutching, G. J. Characterization of Copper-Manganese Oxide Catalysts and Their Precursors: Effect of Precipitate Aging upon the Structure and Morphology of Precursors and Catalysts [Volume 1, Issue 2, 2004, Pages 11-18]
Hydari, S. Synthesis and Characterization of Nanowires Zinc Oxide with Different Temperatures [Volume 10, Issue 2, 2013, Pages 81-86]
I
Irani, M. The Effects of SiO2 and Al2O3 Binders on the Activity and Selectivity of Bifunctional Fe/HZSM-5 Catalyst in Fischer-Tropsch Synthesis [Volume 5, Issue 2, 2008, Pages 64-70]
Irani, M. Monolithic Three-way Palladium Catalytic Converters for Automobile Exhaust Emission Control [Volume 2, Issue 1, 2005, Pages 61-70]
Irankhah, A. Methanol Steam Reforming Catalyzing over Cu/Zn/Fe Mixed Oxide Catalysts [Volume 14, Issue 1, 2017, Pages 26-39]
Irankhah, A. Effect of MgAl2O4 catalyst support synthesis method on the catalytic activity of nickel Nano catalyst in reverse water gas shift reaction [Volume 16, Issue 3, 2019, Pages 58-69]
Irankhah, A. CFD Simulation of Methane Steam Micro-Reformer: Channel Design and Inlet/Outlet Configuration [Volume 16, Issue 4, 2019, Pages 23-35]
Irankhah, A. Medium Temperature Shift Reaction Over Copper-Ceria catalyst in Fixed-Bed and Microchannel Reactors [Volume 18, Issue 1, 2021, Pages 46-51]
Irankhah, A. Screening of important factors affecting the process of ammonia synthesis by Plackett-Burman method and process optimization with RSMScreening the Important Factors Affecting the Process of Ammonia Synthesized by the Plackett-Burman Method and the Process Optimization with RSM [Volume 19, Issue 2, 2022, Pages 3-20]
Irankhah, Abdullah Effect of Synthesis Method and Nickel-Copper Loading on Ni-Cu-Al Catalysts for Production of Hydrogen Via Ethanol Steam Reforming [Volume 21, Issue 1, 2024, Pages 51-61]
Irankhah, Abdullah Impact of Liquid-Liquid Hydrodynamic Focusing on the Efficiency of Heterogeneous Microreactors: Numerical Solution [Volume 21, Issue 2, 2024, Pages 3-14]
Irankhah, Abdullah Modification of the Isomerization Process to Improve Research Octane Number [Volume 21, Issue 3, 2024, Pages 66-82]
Irankhah, A. Irankhah Copper Catalysts Supported on CeMnO2 for CO Oxidation in Hydrogen-Rich Gas Streams [Volume 12, Issue 3, 2015, Pages 3-14]
Iravani, E. Removal of Cerium from Aqueous Solutions by Amino Phosphate Modified Nano TiO2: Kinetic, and Equilibrium Studies [Volume 13, Issue 2, 2016, Pages 3-21]
Islam, Md. M. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]
Izadi, Mahtab High-Precision Neuro-Fuzzy Modeling of Pressure Loss in Coiled Flow Inverters Using CFD Data [Volume 22, Issue 3, 2025, Pages 3-17]
Izadkhah, B. Catalytic oxidation of toluene over LaBO3 (B= Fe, Mn and Co) and LaCo0.7B′0.3O3 (B′= Fe and Mn) perovskite-type [Volume 14, Issue 1, 2017, Pages 67-73]
Izadkhah, M.Sh Application of artificial neural network in deoxygenation of water by glucoseoxidase immobilized in calcium alginate/MnO2 composite [Volume 15, Issue 3, 2018, Pages 82-93]
J
Jabbari, A.M. Fe3O4 Magnetic Nanoparticles/ Graphene Oxide Nanosheets/Carbon Cloth as an Electrochemical Sensing Platform [Volume 16, Issue 2, 2019, Pages 95-102]
Jadidi, M. Adsorption and Desorption Process of Chromium Ions Using Magnetic Iron Oxide Nanoparticles and Its Relevant Mechanism [Volume 14, Issue 3, 2017, Pages 31-40]
Jafari, M. Copper Catalysts Supported on CeMnO2 for CO Oxidation in Hydrogen-Rich Gas Streams [Volume 12, Issue 3, 2015, Pages 3-14]
Jafari, M. Methanol Steam Reforming Catalyzing over Cu/Zn/Fe Mixed Oxide Catalysts [Volume 14, Issue 1, 2017, Pages 26-39]
Jafari, O. Propionic acid extraction in a microfluidic system: simultaneous effects of channel diameter and fluid flow rate on the flow regime and mass transfer [Volume 15, Issue 4, 2018, Pages 48-62]
Jafari Nasr, M.R. Convective Heat Transfer Enhancement of CNT-Water Nanofluids in Plain Tube Fitted with Wire Coil Inserts [Volume 11, Issue 2, 2014, Pages 43-55]
Jafarizad, Abbas Ultrasonic Assisted Synthesis and Characterization of xCuO/CeO2–γAl2O3 Nanoatalysts [Volume 13, Issue 3, 2016, Pages 43-53]
Jafarizadeh- Malmiri, Hoda Optimization of Candida rugosa lipase immobilization parameters on magnetic silica aerogel using adsorption method [Volume 13, Issue 3, 2016, Pages 19-31]
Jafarkhani, M. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering [Volume 18, Issue 1, 2021, Pages 3-15]
Jafarzadeh, Y. Experimental Investigation on the Effect of Parameters Influencing the Performance of a Horizontal Styrene-Water Separator [Volume 9, Issue 3, 2012, Pages 48-54]
Jafarzadeh, Y. Batch Separation of Styrene/Ethyl Benzene/Water Dispersions [Volume 7, Issue 4, 2010, Pages 22-28]
Jahanban-Esfahlan, A. A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]
Jahanban-Esfahlan, R. A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]
Jahangiri, Sahar Synthesis and Characterization of Doxorubicin Coated with Magnetic Copolymer Polycaprolactone-Polyethylene Glycol for Use in the Cancer Treatment [Volume 18, Issue 4, 2021, Pages 36-48]
Jahanmiri, A. Developing Adaptive Differential Evolution as a New Evolutionary Algorithm, Application in Optimization of Chemical Processes [Volume 8, Issue 2, 2011, Pages 18-28]
Jahanmiri, A. Simulation of Water Coning in Oil Reservoirs Using a Corrected IMPES Method [Volume 5, Issue 4, 2008, Pages 3-11]
Jahanmiri, A. Nonlinear modeling and cascade control design for multi effect falling film evaporators [Volume 3, Issue 2, 2006, Pages 52-63]
Jahanshahi, M. Fabrication and Evaluation of Functionalized Nano-titanium Dioxide (F-NanoTiO2)/ polysulfone (PSf) Nanocomposite Membranes for Gas Separation [Volume 11, Issue 4, 2014, Pages 40-49]
Jahanshahi, M. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering [Volume 18, Issue 1, 2021, Pages 3-15]
Jalalvandi, K. Prediction of erosion rate in gas-solid flow using computational fluid dynamics (CFD): focus on geometrical parameters [Volume 20, Issue 2, 2023, Pages 33-49]
Jalalvandi, Kiarash CFD Modelling of Solid-Liquid Two-Phase Flow in a Centrifugal Pump and investigation of the Effects of Fluid Flow Rate and Particle Concentration on Erosion Rate [Volume 22, Issue 3, 2025, Pages 50-67]
Jalili, A. H. Experimental Investigation on the Solubility and Initial Rate of Absorption of CO2 in Mixture of Amine-Functionalized Ionic Liquids and Physical Solvents [Volume 12, Issue 1, 2015, Pages 68-77]
Jalili, A. H. Thermo Physical Properties of Some Physical and Chemical Solvents at Atmospheric Pressure [Volume 10, Issue 4, 2013, Pages 43-54]
Jalili, K. Synthesis and Characterization of PDMS/PAAc Sequential IPNs [Volume 7, Issue 1, 2010, Pages 3-12]
Jalilian, Hadis Studying the Catalytic Performance, Characterization and Kinetic of SrO-CaO-Al2O3 Nanocatalysts for Producing Biodiesel [Volume 22, Issue 1, 2025, Pages 3-27]
Jalilnejad, E. CFD Modeling of Hydrocarbon-Air System Hydrodynamics in Three Types of Column Reactors [Volume 17, Issue 1, 2020, Pages 47-64]
Jalilpiran, M. Pilot Plant Scale Interesterification of Special Fat Blends to Prepare Zero-Trans Margarine: Monitoring the Fatty Acids content and Physicochemical Properties [Volume 19, Issue 4, 2022, Pages 76-94]
Jamekhorshid, A. A Comprehensive Study on a Latent Heat Thermal Energy Storage System and its Feasible Applications in Greenhouses [Volume 13, Issue 2, 2016, Pages 33-45]
Jamili, Mahmood Ultrasonic Assisted Synthesis and Characterization of xCuO/CeO2–γAl2O3 Nanoatalysts [Volume 13, Issue 3, 2016, Pages 43-53]
Jamshidi, E. Modeling of Catalyst Effect on the Reduction Rate Enhancement of Barium Sulfate by Methane and Developing Two Environmentally Friendly Processes [Volume 7, Issue 1, 2010, Pages 13-27]
Jamshidi, S. Kinetic Study of Barite Carbothermic Reduction in Presence of Sodium Carbonate as Catalyst [Volume 7, Issue 2, 2010, Pages 58-67]
Jan Amiri, Reza Achieving Optimal Conditions of Membrane Bioreactors for Dairy Industry Wastewater Treatment [Volume 21, Issue 3, 2024, Pages 49-65]
Javadi, A. Study of Carbon Black Production with Optimized Feed to Predict Product Particle Size [Volume 4, Issue 1, 2007, Pages 36-42]
Javadi, M. Investigation of Sour Natural Gas Decomposition in a Nozzle-type Solar Reactor for Hydrogen Production [Volume 9, Issue 1, 2012, Pages 40-49]
Javanmardi, J. Prediction of Liquid-Liquid Equilibria of Binary Systems Containing Alcohols Using EoS-GE Models [Volume 7, Issue 4, 2010, Pages 12-21]
Jimoh, M. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]
Johari Majd, V. Application of affine gray-box neural models for nonlinear control of chemical processes [Volume 3, Issue 1, 2006, Pages 65-76]
Jorfi, S. Enhancing Photocatalytic Activity of Nitrogen Doped TiO2 for Degradation of 4-Chlorophenol under Solar Light Irradiation [Volume 15, Issue 3, 2018, Pages 3-14]
Jorfi, S. Synthesize and application of Fe3O4/MW-CNT Composite in photo-catalyst-assisted electrochemical oxidation of BTX compounds from wastewater [Volume 20, Issue 1, 2023, Pages 54-66]
Jorfi, Sahand Synthesize and Application of Fe3O4/MW-CNT Composite in Photo-Catalyst Assisted Electrochemical Oxidation of BTX Compounds from Wastewater [Volume 21, Issue 4, 2024, Pages 3-19]
Joshi, A. Energy Recovery Study for Polyethylene and Cotton by Thermal Plasma Degradation [Volume 10, Issue 3, 2013, Pages 3-13]
K
Kabir, H. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering [Volume 18, Issue 1, 2021, Pages 3-15]
Kadkhodayan, H. Improvement of the Metal Extraction and Removal of Harmful Impurities from Sulfide Ores by Polyoxometalate Oxidizers: Design of Experiments and Industrial Modeling [Volume 20, Issue 3, 2023, Pages 21-54]
Kaghazchi, T. Selective Transport of Propylene by Silver Ion Complex Through an Immobilized Liquid Membrane [Volume 7, Issue 1, 2010, Pages 28-41]
Kaghazchi, T. Recovery of Gold from Gold Plating Industry Wastewater Using an Agricultural Waste: Hard Shell of Apricot Stones [Volume 4, Issue 1, 2007, Pages 21-35]
Kaghazchi, T. A Model For The Residence Time Distribution and Holdup Measurement in a Two Impinging Streams Cyclone Reactor/Contactor in Solid-Liquid Systems [Volume 3, Issue 3, 2006, Pages 17-28]
Kahforoushan, D. Effect of Various Parameters on Emission Factors of Gas Flares [Volume 11, Issue 3, 2014, Pages 59-66]
Kakaei, H. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
Kakoui, N. Extraction of pectin from sour orange and its application as the adsorbent for removal of nickel from aqueous solution: Kinetic and equilibrium study [Volume 15, Issue 2, 2018, Pages 3-21]
Kalantari, H. Optimization of factors affecting on sulfide oxidation from synthetic spent caustic by Haloalkaliphilic Thioalkalivibrio versutus by focus on sodium ion effect: Application of response surface methodology [Volume 14, Issue 1, 2017, Pages 74-87]
Kalantar Kohdami, F. The Synthesis of SAPO-34 at Different Crystallization Temperature and its Catalytic Performance for Methanol to Olefins Reaction [Volume 11, Issue 4, 2014, Pages 31-39]
Kalantar Kohdami, F. Effect of Crystallization Temperature on the Synthesis of SAPO-34 and its Catalytic Performance in MTO Reaction [Volume 11, Issue 3, 2014, Pages 16-25]
Kalbasi, M. A Numerical Simulation Model of Solid Acid Fuel Cell Performance by CsH2PO4 Electrolyte [Volume 14, Issue 2, 2017, Pages 17-32]
Kamali, Fahimeh Ultrasonic Distillation of Ethanol-Water Mixtures: Optimization Using Response Surface Methodology (RSM) [Volume 22, Issue 1, 2025, Pages 87-102]
Kamandar, Mohamad Reza Drying Apple Slices in a Rotating-Tray Convective Dryer: A Study on Dehydration Characteristics and Qualitative Attributes [Volume 18, Issue 3, 2021, Pages 16-32]
Kamandari, H. Study on Pore and Surface Development of Activated Carbon Produced from Iranian Coal in a Rotary Kiln Reactor [Volume 10, Issue 3, 2013, Pages 27-38]
Kamaruddin, A. H. Application of response surfase methodology for the optimization of Cu and Zn removals by sorption on pre-treated oil palm fround [Volume 3, Issue 2, 2006, Pages 73-84]
Kanani, V. Comparison of Biosorption of Cadmium (II) from Aqueous Solution, by Bacillus Sp and Pseudomonas Aeruginosa [Volume 10, Issue 2, 2013, Pages 14-21]
Karami, H.R. Increasing flow capacity and reducing drag in microtubes using drag-reducing polymer [Volume 17, Issue 2, 2020, Pages 70-87]
Karamoddin, M. Prediction of Gas Hydrate Forming Pressures by Using PR Equation of State and Different Mixing Rules [Volume 8, Issue 1, 2011, Pages 46-55]
Kargari, A. Selective Transport of Propylene by Silver Ion Complex Through an Immobilized Liquid Membrane [Volume 7, Issue 1, 2010, Pages 28-41]
Kargari, A. Application of experimental design to emulsion liquid membrane pertraction of gold ons from aqueous solutions [Volume 3, Issue 1, 2006, Pages 77-91]
Kargari, A. Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]
Karim, A. Synthesis and Characterization of Nanostructured CuO/CeO2 Catalysts via Ultrasound Assisted Techniques used for Selective Oxidation of CO [Volume 10, Issue 3, 2013, Pages 51-59]
Karimi, A. Application of artificial neural network in deoxygenation of water by glucoseoxidase immobilized in calcium alginate/MnO2 composite [Volume 15, Issue 3, 2018, Pages 82-93]
Karimi, Asadollah Ultrasonic Assisted Synthesis and Characterization of xCuO/CeO2–γAl2O3 Nanoatalysts [Volume 13, Issue 3, 2016, Pages 43-53]
Karimi, F. Manganese Oxide Promoted LaCoO3 Nano-Perovskite for Oxidation of a Model Exhaust Gas [Volume 9, Issue 2, 2012, Pages 22-33]
Karimi, F. Drilling Stuck Pipe Prediction in Iranian Oil Fields: An Artificial Neural Network Approach [Volume 7, Issue 4, 2010, Pages 29-41]
Karimi, M. Nonlinear modeling and cascade control design for multi effect falling film evaporators [Volume 3, Issue 2, 2006, Pages 52-63]
Karimi, S. Prediction of polyvinyl alcohol (PVOH) properties synthesized at various conditions by artificial neural networks technique [Volume 14, Issue 2, 2017, Pages 3-16]
Karimian, Azam Optimization of the Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide Based Respiratory Air Tablets Using the Taguchi Method [Volume 18, Issue 4, 2021, Pages 81-98]
Karimian, H. Modification of Montmorillonite and Prediction of Polymer/Clay Affinity Using Surface Properties and Lattice Model [Volume 12, Issue 3, 2015, Pages 41-54]
Kariminia, H. R. Prediction of Electricity Generation in a Duel Chamber Microbial Fuel Cell [Volume 9, Issue 1, 2012, Pages 3-11]
Karimi-Sabet, J. Effect of graphite oxidation on the yield and quality of graphene synthesized by supercritical exfoliation and its application in photocatalytic degradation of methylene blue [Volume 12, Issue 4, 2015, Pages 52-68]
Karimnezhad, Hanieh Isolation and Identification of a Bacterial Strain Producing Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) from Municipal Landfill Soil [Volume 22, Issue 4, 2025, Pages 43-55]
Karimzadeh, R. SHAHAB-A PC-Based Software for Simulation of Steam Cracking Furnaces (Ethane and Naphtha) [Volume 1, Issue 2, 2004, Pages 55-70]
Kashi, E. Effects of Vertical Temperature Gradient on Heavy Gas Dispersion in Build up Area [Volume 6, Issue 3, 2009, Pages 26-45]
Kashi, E. Comparison the performance of different reverse osmosis membrane modules by CFD modeling [Volume 16, Issue 1, 2019, Pages 101-116]
Katoh, Shigeo Semi-Continuous Cultivation of Photosynthetic Cells in a Flat Plate Photobioreactor [Volume 2, Issue 2, 2005, Pages 15-21]
Katsuda, Tomohisa Semi-Continuous Cultivation of Photosynthetic Cells in a Flat Plate Photobioreactor [Volume 2, Issue 2, 2005, Pages 15-21]
Kavoosi, Allahbakhsh The Effect of the Thermal Behavior of RT22HC Phase Change Material on Double-Skin Facades in Cold Climates [Volume 22, Issue 4, 2025, Pages 83-103]
Kavoosi, S. Synthesis the Bioactive Conjugates of Nisin-Xanthan through the Maillard Reaction at Moderate Temperature [Volume 20, Issue 1, 2023, Pages 78-91]
Kayani, M. Mathematical simulation of thermal behavior of moving bed reactors [Volume 14, Issue 4, 2017, Pages 48-58]
Kazemeini, M. Dehydration of Methanol to Dimethyl Ether Employing Modified H-ZSM-5 Catalysts [Volume 6, Issue 1, 2009, Pages 3-11]
Kazemeini, M. Mathematical modeling of a fixed bed chromatographic reactor for Fischer Tropsch synthesis [Volume 3, Issue 3, 2006, Pages 51-64]
Kazemeini, M. Reactor Modeling of a Non-Catalytic OCM Process [Volume 2, Issue 2, 2005, Pages 3-14]
Kazemi, F. Effects of particle size distribution on flotation kinetics of bituminous coal [Volume 17, Issue 2, 2020, Pages 3-13]
Kazemi, Yaser Impact of Liquid-Liquid Hydrodynamic Focusing on the Efficiency of Heterogeneous Microreactors: Numerical Solution [Volume 21, Issue 2, 2024, Pages 3-14]
Kazemi-Beydokhti, A. Oxidative desulfurization of petroleum products using decorated cobalt oxide on the surface of modified carbon nanotubes-ICHEC-1887 [Volume 18, Issue 1, 2021, Pages 36-45]
Kazi, M.-K. Design and Fabrication of an Improved Single-Column Chromatographic Separation Process [Volume 15, Issue 4, 2018, Pages 81-92]
Kermaninejad, Mehraneh Investigation of Operation Life on Catalyst of Acetylene Hydrogenation Reactor – An Industrial Study [Volume 22, Issue 1, 2025, Pages 42-53]
Keshavarz, M. Biofiltration of BTEX in a Mixture Bed of Bagasse and Activated Carbon Using Aspergillus Fungi [Volume 10, Issue 2, 2013, Pages 22-32]
Keshavarz Moraveji, M. Investigation of Gas Hold-up and Bubble Behavior in a Split-Cylinder Airlift Reactor: Pseudo-Plastic Non-Newtonian Fluids [Volume 11, Issue 3, 2014, Pages 3-15]
Keshavarz Moraveji, Mostafa Three-dimensional CFD modeling of fluid flow and heat transfer characteristics of Al2O3/water nanofluid in microchannel heat sink with Eulerian-Eulerian approach [Volume 13, Issue 4, 2016, Pages 46-61]
Keshavarz Moraveji, Mostafa Synthesize and Application of Fe3O4/MW-CNT Composite in Photo-Catalyst Assisted Electrochemical Oxidation of BTX Compounds from Wastewater [Volume 21, Issue 4, 2024, Pages 3-19]
Keshavarz Moraveji*, M. Experimental Study and CFD Modeling of the Ohmic Heating Process in a Static Two-Phase Biosolid – Liquid System [Volume 12, Issue 2, 2015, Pages 75-87]
Khadiv-Parsi, P. Application of Multistage Steam Distillation Column for Extraction of Essential Oil of Valeriana officinialis L. Cultivated in Iran [Volume 10, Issue 4, 2013, Pages 79-84]
Khadiv-Parsi, P. Application of Multistage Steam Distillation Column for Extraction of Essential Oil of Rosemarinuse officinialis L. [Volume 9, Issue 4, 2012, Pages 54-64]
Khadiv-Parsi, P. Experimental Study of Phase Inversion in n-Butylacetate-Water, Kerosene-Water, and n-Heptane-Water Systems in a Rotating Disc Contactor Column [Volume 8, Issue 4, 2011, Pages 57-64]
Khadiv-Parsi, P. Phase Inversion in a Batch Liquid – Liquid Stirred System [Volume 5, Issue 2, 2008, Pages 55-63]
Khadiv-Parsi, P. Preparation and Drug-Delivery Properties of Metal-Organic Framework HKUST-1 [Volume 16, Issue 4, 2019, Pages 73-80]
Khadiv-Parsi, Parissa Simultaneous Effects of Ionic Surfactant and Salt on Drop-Interface Coalescence [Volume 6, Issue 4, 2009, Pages 73-86]
Khajeh Amiri, M. Experimental, Kinetics and Isotherm Modeling of Carbon Dioxide Adsorption with 13X Zeolite in a fixed bed column [Volume 16, Issue 1, 2019, Pages 54-64]
Khaksar Manshad, A. Simulation and Experimental Investigation of the Permeability Reduction due to Asphaltene Deposition in Porous Media [Volume 7, Issue 3, 2010, Pages 3-16]
Khalilipour, M. M Plantwide Control Structure of the Diethyl Oxalate Process Concerning: Safety and Process Improvement [Volume 19, Issue 4, 2022, Pages 52-75]
Khan, M. N. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]
Khandan, N. Dehydration of Methanol to Dimethyl Ether Employing Modified H-ZSM-5 Catalysts [Volume 6, Issue 1, 2009, Pages 3-11]
Khani, M.H. Biosorption of cobalt (II) by Inta ct and Chemically Modified Brown Algae: Optimization Using Resp onse Surface Methodology and Equilibrium, Dynamics and Thermodynamics Studies [Volume 11, Issue 2, 2014, Pages 56-77]
Khani, M.J. Effect of Particle Size of Zinc Powder on the Efficiency of Ni-Cd Cementation in Cold Purification Reactor [Volume 20, Issue 3, 2023, Pages 90-103]
Kharazi, M. Adsorption Behavior of Short Alkyl Chain Imidazolium Ionic Liquidsat N-Butyl Acetate + Water Interface: Experiments and Modeling [Volume 12, Issue 2, 2015, Pages 59-74]
Khazaei, I. Use of Agricultural Waste for Removal of Cr(VI) from Aqueous Solution [Volume 8, Issue 4, 2011, Pages 11-23]
Khazraei Vizhemeh, A. Prediction of Electricity Generation in a Duel Chamber Microbial Fuel Cell [Volume 9, Issue 1, 2012, Pages 3-11]
Khebri, V. Design and construction of a helium purification system using cryogenic adsorption process [Volume 15, Issue 1, 2018, Pages 89-101]
Kheradmand, A. Preparation of Ultra High Molecular Weight Polyethylene Using Ziegler-Natta Catalyst System: Optimization of Parameters by Response Surface Methodology [Volume 11, Issue 1, 2014, Pages 55-62]
Khodadadi, A. Manganese Oxide Promoted LaCoO3 Nano-Perovskite for Oxidation of a Model Exhaust Gas [Volume 9, Issue 2, 2012, Pages 22-33]
Khodamoradi, Golnoosh Sustainable Synthesis of Methanol through Synthesis Gas Produced from Three Lignocellulosic Biomasses: Process Simulation and Economic Analysis [Volume 22, Issue 1, 2025, Pages 67-86]
Khodapanah, E. Effect of Hydrocarbon Fluid Characterization on Wax Precipitation Modeling [Volume 6, Issue 1, 2009, Pages 50-65]
Kholghi, M. Experimental Investigation of Silica Fume as a Cement Extender for Liner Cementing in Iranian Oil/Gas Wells [Volume 7, Issue 1, 2010, Pages 42-66]
Khoram, M. An Experimental and Theoretical Investigation on Thermal Performance of a Gas-Liquid Thermosyphon Heat Pipe Heat Exchanger in a Semi-Industrial Plant [Volume 6, Issue 3, 2009, Pages 13-25]
Khori Amirabadi, F. Optimizing of Synthesis of High Purity HMX Using Polyphosphoric Acid by Response Surface Method [Volume 20, Issue 2, 2023, Pages 50-61]
Khorram, M. Study of Parameters Affecting Size Distribution of Beads Produced from Electro-Spray of High Viscous Liquids [Volume 6, Issue 3, 2009, Pages 88-98]
Khorshidi, J. Experimental study of hydrodynamic characteristics of improved sieve tray with push valves [Volume 14, Issue 1, 2017, Pages 40-51]
Khorshidi, Jamshid Effect of Nanofluids on the Performance of Shell and Tube, Double Pipe and Plate Heat Exchangers: Simulation and Experimental Evaluations [Volume 22, Issue 1, 2025, Pages 28-41]
Khoshandam, Behnam Pyrolysis of Polyethylene Terephthalate via Infrared Heating: Comparing the Effect of the Heating Rate Factor on The Quality and Quantity of the Final Char Product [Volume 22, Issue 3, 2025, Pages 68-77]
Khoshhal, S. Khoshhal Synthesis of a high characteristics activated carbon from walnut shell for the removal of Cr (VI) and Fe (II) from aqueous solution: single and binary solutes adsorption [Volume 12, Issue 4, 2015, Pages 28-51]
Khoshnam, Farhad Drying Apple Slices in a Rotating-Tray Convective Dryer: A Study on Dehydration Characteristics and Qualitative Attributes [Volume 18, Issue 3, 2021, Pages 16-32]
Khoshnoodi, M. Investigation of CO2 and H2O Addition to Natural Gas for Production of Synthesis Gas [Volume 2, Issue 1, 2005, Pages 31-54]
Khoshnoodi, M. Investigation of pollutant generation by simulation of premixed gaseous combustion using aspen plus [Volume 1, Issue 1, 2004, Pages 3-10]
Khoshnoodi, M. Characterization of Copper-Manganese Oxide Catalysts and Their Precursors: Effect of Precipitate Aging upon the Structure and Morphology of Precursors and Catalysts [Volume 1, Issue 2, 2004, Pages 11-18]
Khoshrou, Siamak Polysulfone/ Carbon Nanotubes Asymmetric Nanocomposite Membranes: Effect of Nanotubes Surface Modification on Morphology and Water Permeability [Volume 12, Issue 4, 2015, Pages 69-83]
Khosravan, A. Adsorption of Cd(II) by Dried Activated Sludge [Volume 8, Issue 2, 2011, Pages 41-56]
Khosrozadeh, I. Optimization of Semiregenerative Catalytic Naphtha Reforming Unit to Enhance Octane Number and Reformate Yield [Volume 15, Issue 2, 2018, Pages 52-64]
Kian, M. Study of the Industrial Wastewater Treatment by a Membrane Bioreactor (MBR) Case Study: Cookie Factory Wastewater [Volume 17, Issue 3, 2020, Pages 74-84]
Kiani, S. Effect of Time and Temperature on Moisture Content, Shrinkage, and Rehydration of Dried Onion [Volume 6, Issue 3, 2009, Pages 57-70]
Kiran, B. Effect of Amino Acids on Magnesium Ammonium Phosphate Hexahydrate (Struvite) Crystallization [Volume 11, Issue 1, 2014, Pages 3-18]
Koksal, M. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
Kompany, R. Effects of Height to Diameter Ratio and Aeration rate on Liquid Mixing and Hydrodynamic Properties in a Bubble Column [Volume 6, Issue 3, 2009, Pages 46-56]
Kostic, N.A. Desulfurization and demetalization of used engine oil in laboratory scale [Volume 15, Issue 1, 2018, Pages 73-88]
Kraimian, Azam Optimization of Electrospinning Conditions for the Preparation of Ethyl Cellulose (EC) Nanofibers (NF) Based on the Taguchi Method [Volume 21, Issue 1, 2024, Pages 81-97]
Krstic, S.S. Desulfurization and demetalization of used engine oil in laboratory scale [Volume 15, Issue 1, 2018, Pages 73-88]
Krstić, B.V. Desulfurization and demetalization of used engine oil in laboratory scale [Volume 15, Issue 1, 2018, Pages 73-88]
Kulah, G. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
Kumar, M. Magnetohydrodynamic (MHD ) Plane Poiseuille Flow With Variable Viscosity and Unequal Wall Temperatures [Volume 11, Issue 1, 2014, Pages 63-68]
Kumar Jhankal, A. Magnetohydrodynamic (MHD ) Plane Poiseuille Flow With Variable Viscosity and Unequal Wall Temperatures [Volume 11, Issue 1, 2014, Pages 63-68]
L
Lashgari, Soheila Nature-Inspired Silver Nanoparticles: Easy Process Optimization with Celtis caucasica Leaves and Antibacterial Insights [Volume 22, Issue 3, 2025, Pages 34-49]
Lashgari, Somayeh Nature-Inspired Silver Nanoparticles: Easy Process Optimization with Celtis caucasica Leaves and Antibacterial Insights [Volume 22, Issue 3, 2025, Pages 34-49]
Lashkari, B. Adsorption of Cd(II) by Dried Activated Sludge [Volume 8, Issue 2, 2011, Pages 41-56]
Lebiod, Achouak Valorization of Plant Fiber for the Reinforcement of Thermoplastic Matrix [Volume 22, Issue 2, 2025, Pages 3-11]
Leon, Florin Liquid-liquid equilibrium data prediction using large margin nearest neighbor [Volume 13, Issue 4, 2016, Pages 14-32]
Li, Q. Application of Multistage Steam Distillation Column for Extraction of Essential Oil of Rosemarinuse officinialis L. [Volume 9, Issue 4, 2012, Pages 54-64]
Lisa, Cătălin Experimental Studies of Surface Tensions for Binary and Ternary Systems of Benzyl Alcohol, N-Hexanol and Water. Modeling with Neural Networks [Volume 21, Issue 1, 2024, Pages 3-16]
Lisa, Gabriela Experimental Studies of Surface Tensions for Binary and Ternary Systems of Benzyl Alcohol, N-Hexanol and Water. Modeling with Neural Networks [Volume 21, Issue 1, 2024, Pages 3-16]
Lotfollahi, M. N. Ternary phase diagram for polymer/ solvent/ supercritical-CO2by sanchez-lacombe model [Volume 3, Issue 2, 2006, Pages 64-72]
M
Madaeni, S. S. Characterization of Lithium Ion Transport Via Dialysis Process [Volume 3, Issue 4, 2006, Pages 35-43]
Mafi, M. Biofiltration of BTEX in a Mixture Bed of Bagasse and Activated Carbon Using Aspergillus Fungi [Volume 10, Issue 2, 2013, Pages 22-32]
Mahallati, P. Thermal and Morphological Properties of Thermoplastic Elastomer Nanocomposites Based on PA6/NBR [Volume 8, Issue 1, 2011, Pages 56-65]
Mahdavian, A. R. Application of ESD and PR+Wong Sandler Mixing Rule Equations of State to Study Methane Hydrate Formation in the Presence of Different Inhibitors [Volume 8, Issue 3, 2011, Pages 16-30]
Mahdavian, A. R. The Effect of Cobalt Naphthenate and 2-benzoylbenzoic Acid on UV-Degradation of LDPE [Volume 8, Issue 3, 2011, Pages 31-42]
Mahdaviani, S. H. Production of 1-Butene via Selective Ethylene Dimerization by Addition of Bromoethane as a New Promoter to Titanium-Based Catalyst in the Presence of Tetrahydropyran Modifier and Triethylaluminum Co-Catalyst [Volume 9, Issue 3, 2012, Pages 3-13]
Mahjoob, M. R. Numerical Study of Non-Newtonian Flow Through Rectangular Microchannels [Volume 6, Issue 4, 2009, Pages 44-61]
Mahmoodi, L. Mathematical simulation of thermal behavior of moving bed reactors [Volume 14, Issue 4, 2017, Pages 48-58]
Mahmoudian, M. Prediction of Red Mud Bound-Soda Losses in Bayer Process Using Neural Networks [Volume 13, Issue 2, 2016, Pages 46-56]
Mahmoudizadeh, M. Methanol Steam Reforming Catalyzing over Cu/Zn/Fe Mixed Oxide Catalysts [Volume 14, Issue 1, 2017, Pages 26-39]
Mahyari, M. Optimizing of Synthesis of High Purity HMX Using Polyphosphoric Acid by Response Surface Method [Volume 20, Issue 2, 2023, Pages 50-61]
Maini, B. Experimental study of the shape and motion of flattened drops in a Hele-Shaw Cell [Volume 3, Issue 4, 2006, Pages 3-16]
Makvandi, S. CO x Free Hydrogen Production by Catalytic Decomposition of Methane Over Porous Ni/Al2O3 Catalysts [Volume 8, Issue 4, 2011, Pages 24-33]
Maleki, L. Characterization of Copper-Manganese Oxide Catalysts and Their Precursors: Effect of Precipitate Aging upon the Structure and Morphology of Precursors and Catalysts [Volume 1, Issue 2, 2004, Pages 11-18]
Maleki-Khalan, Sahar Enhancing Water Shut-Off in Oil Reservoirs Using Silica Nanoparticle-Reinforced Polymer Gels: A Lab Study [Volume 22, Issue 2, 2025, Pages 65-85]
Maleky-dozzadeh, M. Application of Multistage Steam Distillation Column for Extraction of Essential Oil of Valeriana officinialis L. Cultivated in Iran [Volume 10, Issue 4, 2013, Pages 79-84]
Malekydozzadeh, M. Application of Multistage Steam Distillation Column for Extraction of Essential Oil of Rosemarinuse officinialis L. [Volume 9, Issue 4, 2012, Pages 54-64]
Malekzadeh, A. Manganese Oxide Promoted LaCoO3 Nano-Perovskite for Oxidation of a Model Exhaust Gas [Volume 9, Issue 2, 2012, Pages 22-33]
Mandooie, Masoud A Density Functional Theory (DFT) Investigation on the Impact of the Linker Length in Zinc Oxide-Based Metal-Organic-Frameworks for Hydrogen Adsorption [Volume 21, Issue 1, 2024, Pages 30-50]
Mansoori, G.A. Removal of H2S from Synthetic Waste Gas Streams Using a Biotrickling Filter [Volume 5, Issue 3, 2008, Pages 40-51]
Mansoori, G.A. The Modified Lennard-Jones and Devonshire Equation of State [Volume 5, Issue 3, 2008, Pages 52-61]
Manteghian, M. Biosorption of cobalt (II) by Inta ct and Chemically Modified Brown Algae: Optimization Using Resp onse Surface Methodology and Equilibrium, Dynamics and Thermodynamics Studies [Volume 11, Issue 2, 2014, Pages 56-77]
Mardani, R. Effect of the Carbon Source Flow Rate on the Quality of the Growth of Super-Aligned Carbon Nanotube Arrays by the Chemical Vapor Deposition Method [Volume 20, Issue 3, 2023, Pages 45-53]
Mashhadimoslem, Hossein Evaluation of the Silica Gel Adsorbent Potential for Carbon Dioxide Capture: Experimental and Modeling [Volume 18, Issue 4, 2021, Pages 64-80]
Masoomi, M. Simulation and Experimental Investigation of the Permeability Reduction due to Asphaltene Deposition in Porous Media [Volume 7, Issue 3, 2010, Pages 3-16]
Masoumi, M.E. Experimental and Kinetic Study of CO Oxidation Over LaFe1-xCuxO3 (x=0, 0.2, 0.4, 0.6) Perovskite-Type Oxides [Volume 15, Issue 2, 2018, Pages 91-102]
Masoumi, Sh. Characterization and optimization of SAPO-34 catalysts synthesized by mixed templates in MTO reaction [Volume 12, Issue 4, 2015, Pages 4-14]
Masum, A. Effect of Amino Acids on Magnesium Ammonium Phosphate Hexahydrate (Struvite) Crystallization [Volume 11, Issue 1, 2014, Pages 3-18]
Mavaddati, Pouya The Effect of the Thermal Behavior of RT22HC Phase Change Material on Double-Skin Facades in Cold Climates [Volume 22, Issue 4, 2025, Pages 83-103]
Mazaheri, K. Determination of the Equilibrium Parameters of Gaseous Detonations Using a Genetic Algorithm [Volume 5, Issue 3, 2008, Pages 3-13]
Mazaheri, K. A New Model for Prediction of Heat Eddy Diffusivity in Pipe Expansion Turbulent Flows [Volume 2, Issue 1, 2005, Pages 24-33]
Medi, B. Design and Fabrication of an Improved Single-Column Chromatographic Separation Process [Volume 15, Issue 4, 2018, Pages 81-92]
Mehdizadeh, A. Experimental Investigation on the Solubility and Initial Rate of Absorption of CO2 in Mixture of Amine-Functionalized Ionic Liquids and Physical Solvents [Volume 12, Issue 1, 2015, Pages 68-77]
Mehdizadeh, H. Solid Phase Equation of State Application for Wax Formation Prediction in Petroleum Mixtures [Volume 5, Issue 2, 2008, Pages 23-33]
Mehdizadeh, H. Dynamic Modeling of Granular Sludge in UASB Reactors [Volume 2, Issue 1, 2005, Pages 52-60]
Mehmandoust, Sh. Modification of Montmorillonite and Prediction of Polymer/Clay Affinity Using Surface Properties and Lattice Model [Volume 12, Issue 3, 2015, Pages 41-54]
Mehralizadeh, A. Studying the Influence of the Mixing Speed of the Polymer Blend of General-Purpose Polystyrene and Acrylonitrile-Butadiene Styrene with the Applications of Artificial Neural Networks [Volume 17, Issue 4, 2020, Pages 21-32]
Mehranian, M. Soy Protein Isolate and Gum Arabic Composite Affects Stability of Beverage Emulsion [Volume 6, Issue 2, 2009, Pages 3-13]
MemarMaher, Behnaz Synthesis of the Poly(Methyl Methacrylate) Brush on the Poly( Vinylidene Fluoride) Membrane via the Surface Initiated Atom Transfer Radical Polymerization [Volume 21, Issue 2, 2024, Pages 74-88]
Mikaniki, F. Dissolving Pulp (alpha-cellulose) from Corn Stalk by Kraft Process [Volume 5, Issue 3, 2008, Pages 14-28]
Milosavljevic, B.L. Desulfurization and demetalization of used engine oil in laboratory scale [Volume 15, Issue 1, 2018, Pages 73-88]
Milosavljevic, M.M. Desulfurization and demetalization of used engine oil in laboratory scale [Volume 15, Issue 1, 2018, Pages 73-88]
Milosevic, D.L. Desulfurization and demetalization of used engine oil in laboratory scale [Volume 15, Issue 1, 2018, Pages 73-88]
Mirahmad, A. A Comprehensive Study on a Latent Heat Thermal Energy Storage System and its Feasible Applications in Greenhouses [Volume 13, Issue 2, 2016, Pages 33-45]
Mirfendereski, S. M. Synthesis of zeolite NaA nano-crystalls; effect of synthesis parameters on crystallinity and crystal size [Volume 16, Issue 1, 2019, Pages 22-38]
Mirhashemi, F. A New Correlation for Drag Coefficient of Extrudate Quadralobe Particles by CFD Simulation [Volume 11, Issue 3, 2014, Pages 26-36]
Mirhoseini renani, N. Effect of Electrohydrodynamic (EHD) on the Drying Rate of Polymer Films Based on the Heat and Mass Transfer [Volume 17, Issue 3, 2020, Pages 41-52]
Mirshahi, H. Experimental Study on the Effect of Heat Loads, Fill Ratio and Extra Volume on Performance of a Partial-Vacuumed Thermosyphon [Volume 6, Issue 4, 2009, Pages 15-26]
Mirzaei, A. A. Characterization of Copper-Manganese Oxide Catalysts and Their Precursors: Effect of Precipitate Aging upon the Structure and Morphology of Precursors and Catalysts [Volume 1, Issue 2, 2004, Pages 11-18]
Mirzajanzadeh, M. Measurement and Correlation of Ibuprofen in Supercritical Carbon Dioxide Using Stryjek and Vera EOS [Volume 7, Issue 4, 2010, Pages 42-49]
Moaf, M. Investigating the Impact of Air Injection on the Thermal Performance of Helical Tube with Varying Helix Diameters: Downward Flow [Volume 19, Issue 2, 2022, Pages 38-50]
Modarress, H. Removal of H2S from Synthetic Waste Gas Streams Using a Biotrickling Filter [Volume 5, Issue 3, 2008, Pages 40-51]
Modarress, H. Ternary phase diagram for polymer/ solvent/ supercritical-CO2by sanchez-lacombe model [Volume 3, Issue 2, 2006, Pages 64-72]
Mofarahi, M. SHAHAB-A PC-Based Software for Simulation of Steam Cracking Furnaces (Ethane and Naphtha) [Volume 1, Issue 2, 2004, Pages 55-70]
Moghadam, H. Study of Parameters Affecting Size Distribution of Beads Produced from Electro-Spray of High Viscous Liquids [Volume 6, Issue 3, 2009, Pages 88-98]
Moghadasi, M. Improving the performance of a two-phase ejector using genetic algorithm based on secondary fluid entrainment rate [Volume 19, Issue 4, 2022, Pages 95-109]
Moghaddas, J. Compartment Mixing Model in a Stirred Tank Equipped Dual Rushton Turbine [Volume 9, Issue 3, 2012, Pages 14-21]
Moghaddas, J. Study on the Effect of Humidity on Electrical Properties of Copper-Silica Aerogel [Volume 12, Issue 2, 2015, Pages 3-12]
Moghaddas, J. Study on diffusion coefficient of benzene and ethyl benzene vapours in nanoporous silica aerogel and silica aerogel-activated carbon composites [Volume 16, Issue 1, 2019, Pages 1-21]
Moghaddas, J. Experimental and Computational Study on Hydrodynamic of a Downscaled Mini Vessel USP Dissolution Test Apparatus II [Volume 16, Issue 3, 2019, Pages 3-22]
Moghaddas, Jafarsadegh A Study of Flow and Mixing in Bubbly Gas-Liquid Pipe Flow Generated by a Grid [Volume 3, Issue 4, 2006, Pages 60-75]
Moghaddas, Jafarsadegh Optimization of Candida rugosa lipase immobilization parameters on magnetic silica aerogel using adsorption method [Volume 13, Issue 3, 2016, Pages 19-31]
Moghaddas, J.S Investigation of Bubble Characteristics by Photographic Method [Volume 19, Issue 3, 2022, Pages 69-80]
Moghaddas, J.S. A Study on Liquid-liquid Mixing in a Stirred Tank with a 6-Blade Rushton Turbine [Volume 5, Issue 4, 2008, Pages 12-22]
Moghaddas, J.S. Synthesis and Characterization of Waterglass-Based Silica Aerogel Under Heat Treatment for Adsorption of Nitrate from Water: Batch and Column Studies [Volume 16, Issue 4, 2019, Pages 53-72]
Moghaddas, J.S. Moghaddas Performance Evaluation of Cu-SiO2 Aerogel Catalyst in Methanol Steam Reforming [Volume 11, Issue 3, 2014, Pages 37-44]
Moghbeli, Mohammad Reza Polysulfone/ Carbon Nanotubes Asymmetric Nanocomposite Membranes: Effect of Nanotubes Surface Modification on Morphology and Water Permeability [Volume 12, Issue 4, 2015, Pages 69-83]
Moghbeli, M. R. Microencapsulation of Ethion by Interfacial Polymerization Utilizing Potassium Phthalimide-N-oxyl (PPINO) as a Promoter [Volume 8, Issue 4, 2011, Pages 34-42]
Moghbeli, M.R. Effect of silica particles on adhesion strength of polyvinyl chloride coatings on metal substrates [Volume 14, Issue 2, 2017, Pages 74-82]
Moghbeli1*, M. R. Modification of Montmorillonite and Prediction of Polymer/Clay Affinity Using Surface Properties and Lattice Model [Volume 12, Issue 3, 2015, Pages 41-54]
Moghiman, M. Investigation of Sour Natural Gas Decomposition in a Nozzle-type Solar Reactor for Hydrogen Production [Volume 9, Issue 1, 2012, Pages 40-49]
Mohamady, R. Dynamic Behavior of an Oil Droplet Adhered to the Wall Surface in a Channel Flow by the Lattice Boltzmann Method [Volume 15, Issue 1, 2018, Pages 35-48]
Mohammadi, A. Study on diffusion coefficient of benzene and ethyl benzene vapours in nanoporous silica aerogel and silica aerogel-activated carbon composites [Volume 16, Issue 1, 2019, Pages 1-21]
Mohammadi, A. Experimental and Computational Study on Hydrodynamic of a Downscaled Mini Vessel USP Dissolution Test Apparatus II [Volume 16, Issue 3, 2019, Pages 3-22]
Mohammadi, A. Conceptual Design of a Batch Process for the Production of Biodiesel from High Free Fatty Acid Feedstocks [Volume 19, Issue 1, 2022, Pages 15-32]
Mohammadi, Abbas Techno-Economic Optimization of a Continuous Process for the Biodiesel Production from Waste Vegetable Oils [Volume 18, Issue 4, 2021, Pages 20-35]
Mohammadi, A.R. A New Model for Prediction of Heat Eddy Diffusivity in Pipe Expansion Turbulent Flows [Volume 2, Issue 1, 2005, Pages 24-33]
Mohammadi, A.R. Reactor Modeling of a Non-Catalytic OCM Process [Volume 2, Issue 2, 2005, Pages 3-14]
Mohammadi, F. Investigation of Liquid–Liquid Two-Phase Flow Pattern in Microreactors for Biodiesel Production [Volume 12, Issue 3, 2015, Pages 32-40]
Mohammadi, F. Biodiesel production from soybean oil using ionic liquid as a catalyst in a microreactor [Volume 15, Issue 1, 2018, Pages 102-114]
Mohammadi, Faezeh Feasibility of the Purification of Pharmaceuticals from Aqueous Solutions using Carbon Nanotubes in the Presence of Oxidizers [Volume 21, Issue 2, 2024, Pages 43-55]
Mohammadi, Faezeh Achieving Optimal Conditions of Membrane Bioreactors for Dairy Industry Wastewater Treatment [Volume 21, Issue 3, 2024, Pages 49-65]
Mohammadi, Faezeh CFD Simulation of Hydrogen Sulfide (H2S) Removal from Crude Oil Through an Optimized Cold Stripping Process in a Microchannel [Volume 22, Issue 4, 2025, Pages 18-28]
Mohammadi, Faezeh Elimination of Heavy Metal Contaminants from Wastewater through Nanoparticle-Assisted Treatment under Ultrasonic Waves [(Articles in Press)]
Mohammadi, M. Extraction of pectin from sour orange and its application as the adsorbent for removal of nickel from aqueous solution: Kinetic and equilibrium study [Volume 15, Issue 2, 2018, Pages 3-21]
Mohammadi, Marjan Laboratory Study of Silicate-Polymer Gel System for Water Shut-off in Hydrocarbon Reservoirs [Volume 22, Issue 1, 2025, Pages 54-66]
Mohammadi, Reza Combination of Machine Learning and Artificial Neural Networks to Predict the Tensile Modulus of Thermoplastic Nanocomposites: The Role of Polymer/Particle Interphase [Volume 22, Issue 4, 2025, Pages 56-82]
Mohammadi, T. Chemical Cleaning of Utafiltration Membrane after Treatment of Oily Wastewater [Volume 7, Issue 3, 2010, Pages 17-28]
Mohammadi, Z. Thermal Stability and Dynamic Mechanical Properties of Nano and Micron-TiO2 Particles Reinforced Epoxy Composites: Effect of Mixing Method [Volume 10, Issue 1, 2013, Pages 16-29]
Mohammadi Doust, A. An optimization study by response surface methodology (RSM) on viscosity reduction of residue fuel oil exposed ultrasonic waves and solvent injection [Volume 13, Issue 1, 2016, Pages 3-19]
Mohammadnezami, H. CFD Simulation of Methane Steam Micro-Reformer: Channel Design and Inlet/Outlet Configuration [Volume 16, Issue 4, 2019, Pages 23-35]
Mohammadzadeh, M. Effect of Drying Conditions on Properties of Dried Sugar Beet [Volume 7, Issue 3, 2010, Pages 81-87]
Moheb, A. Using PERVAP 2201 Membrane in Vapor Permeation Facilitated Isopropyl Propionate Production through Esterification Reaction [Volume 9, Issue 2, 2012, Pages 14-21]
Moheb, A. Oil Sorption by Synthesized Exfoliated Graphite (EG) [Volume 5, Issue 1, 2008, Pages 51-64]
Moheb, A. Laminar Flow Heat Transfer of a Pseudoplastic Fluid through a Double Pipe Heat Exchanger [Volume 3, Issue 2, 2006, Pages 13-19]
Moheb, A. Newtonian and Non-Newtonian Blood Flow Simulation after Arterial Stenosis- Steady State and Pulsatile Approaches [Volume 1, Issue 2, 2004, Pages 45-53]
Mohebbi, A. Development of an Improved Sub-Molten Salt Method for Production of Potassium Titanate from Ilmenite under Industrial Conditions [Volume 10, Issue 3, 2013, Pages 60-75]
Mohebbi, A. A Detailed Investigation of Particulate Dispersion from Kerman Cement Plant [Volume 3, Issue 3, 2006, Pages 65-74]
Mohebbi, V. Kinetics of Propane Hydrate Formation in Agitated Reactor: A Mass Transfer Approach [Volume 14, Issue 2, 2017, Pages 48-58]
Mohebbi, Vahid Investigation of Operation Life on Catalyst of Acetylene Hydrogenation Reactor – An Industrial Study [Volume 22, Issue 1, 2025, Pages 42-53]
Mohebbi Najm Abad, J. Determination of Nusselt Number of Herschel Bulkley Nanofluids by Using CMA-ES Algorithm [Volume 11, Issue 2, 2014, Pages 17-28]
Mohebi, M. Effect of Time and Temperature on Moisture Content, Shrinkage, and Rehydration of Dried Onion [Volume 6, Issue 3, 2009, Pages 57-70]
Mohseni, M. Study on Trend of Biodegradability of Phenolic Compounds During Photo-Fenton Advanced Oxidation Process [Volume 5, Issue 4, 2008, Pages 23-32]
Mokhtarani, B. Biofiltration of BTEX in a Mixture Bed of Bagasse and Activated Carbon Using Aspergillus Fungi [Volume 10, Issue 2, 2013, Pages 22-32]
Mokhtarani, B. Effect of electrokinetic on biodegradation of fluorene and phenanthrene in soil [Volume 13, Issue 2, 2016, Pages 71-79]
Mokhtarani, B. SHAHAB-A PC-Based Software for Simulation of Steam Cracking Furnaces (Ethane and Naphtha) [Volume 1, Issue 2, 2004, Pages 55-70]
Mokhtary, Masoud Fabricating a Polysulfone-ZIF-8 Composite Membrane for Separating CO2 and CH4 [Volume 21, Issue 3, 2024, Pages 3-13]
Mollaabbasi, R. Determination of Nusselt Number of Herschel Bulkley Nanofluids by Using CMA-ES Algorithm [Volume 11, Issue 2, 2014, Pages 17-28]
Momenpoor, B. Assessing Nanostarch-Nanoclay Composite Film as a Potentially Durable Environmental-Friendly Packaging Material [Volume 20, Issue 3, 2023, Pages 3-20]
Moore, C. R Experimental study of the shape and motion of flattened drops in a Hele-Shaw Cell [Volume 3, Issue 4, 2006, Pages 3-16]
Moosavi, H. The Effect of the Method of Adding Impregnation Solutions on the Properties and Performance of the Pd-Ag/Al2O3 Catalyst in the Tail-End Acetylene Selective Hydrogenation. [Volume 18, Issue 2, 2021, Pages 19-30]
Moosavian, M. A. Electro-Coalescence of an Aqueous Droplet at an Oil–Water Interface with an Investigation of Secondary Droplets Formation [Volume 10, Issue 1, 2013, Pages 30-44]
Moosavian, M. A. Simultaneous Effects of Ionic Surfactant and Salt on Drop-Interface Coalescence [Volume 6, Issue 4, 2009, Pages 73-86]
Moosavian, M.-A. Experimental Study of Phase Inversion in n-Butylacetate-Water, Kerosene-Water, and n-Heptane-Water Systems in a Rotating Disc Contactor Column [Volume 8, Issue 4, 2011, Pages 57-64]
Moosavian, M.A. Removal of Cerium from Aqueous Solutions by Amino Phosphate Modified Nano TiO2: Kinetic, and Equilibrium Studies [Volume 13, Issue 2, 2016, Pages 3-21]
Moosavian, M.M. Phase Inversion in a Batch Liquid – Liquid Stirred System [Volume 5, Issue 2, 2008, Pages 55-63]
Moosavian, S. M. A. Effect of graphite oxidation on the yield and quality of graphene synthesized by supercritical exfoliation and its application in photocatalytic degradation of methylene blue [Volume 12, Issue 4, 2015, Pages 52-68]
Moosavian, S. M. A. Stochastic Comparisons of Probability Distribution Functions with Experimental Data in a Liquid-Liquid Extraction Column for Determination of Drop Size Distributions [Volume 14, Issue 3, 2017, Pages 82-95]
Mootabadi, H. Simple Kinetic Modeling of Selective Reduction of Nitric Oxide in Diesel Exhaust Over Cu-Zn/ZSM-5 Monolithic Catalyst [Volume 7, Issue 3, 2010, Pages 74-80]
Moradi, Gh. Theoretical and Empirical Equilibrium Concentration for the Dry Reforming of Methane [Volume 18, Issue 2, 2021, Pages 31-47]
Moradi, Gh. Predicting Kinematic Viscosity and Cetane Number of Diesel- Biodiesel Blend Using Neural Network and Empirical Models [Volume 19, Issue 3, 2022, Pages 81-94]
Moradi, Gholamreza Investigating the Activity of the Supported Bimetallic Ni-Co Catalysts on the Dry Reforming of Methane [Volume 18, Issue 3, 2021, Pages 63-73]
Moradi, H. Preparation and Drug-Delivery Properties of Metal-Organic Framework HKUST-1 [Volume 16, Issue 4, 2019, Pages 73-80]
Moradi, Javad Reducing the Environmental Impact of Thermal Power Plants: A Case Study [Volume 22, Issue 2, 2025, Pages 86-99]
Moradi, M. Laminar Flow Heat Transfer of a Pseudoplastic Fluid through a Double Pipe Heat Exchanger [Volume 3, Issue 2, 2006, Pages 13-19]
Moradi, P. Preparation of Lanthanum–Nickel–Aluminium Perovskite Systems and their Application in Methane-Reforming Reactions [Volume 3, Issue 3, 2006, Pages 29-43]
Moradkhani, H. Application of artificial neural network in deoxygenation of water by glucoseoxidase immobilized in calcium alginate/MnO2 composite [Volume 15, Issue 3, 2018, Pages 82-93]
Moradpour, Negin Feasibility of the Purification of Pharmaceuticals from Aqueous Solutions using Carbon Nanotubes in the Presence of Oxidizers [Volume 21, Issue 2, 2024, Pages 43-55]
Moraveji, M. CFD Study of the Turbulent Forced Convective Heat Transfer of Non-Newtonian Nanofluid [Volume 11, Issue 2, 2014, Pages 92-102]
Moraveji, M. Fabrication and Characterization of Polysulfone-Graphene Oxide Mixed Matrix Membranes for the Natural Gas Treatment [Volume 19, Issue 2, 2022, Pages 21-37]
Moraveji, M. Improving the performance of a two-phase ejector using genetic algorithm based on secondary fluid entrainment rate [Volume 19, Issue 4, 2022, Pages 95-109]
Moraveji, M. Synthesize and application of Fe3O4/MW-CNT Composite in photo-catalyst-assisted electrochemical oxidation of BTX compounds from wastewater [Volume 20, Issue 1, 2023, Pages 54-66]
Moraveji, M. K. Numerical Simulation of the Hydrodynamics of a Two-Dimensional Gas—Solid Fluidized Bed by New Finite Volume Based Finite Element Method [Volume 2, Issue 2, 2005, Pages 22-36]
Moraveji, Mostafa Optimization of the Adsorption of Pb(II) and Zn(II) onto the EDTA-Modified MnO2/Chitosan/Fe3O4 Nanocomposite from an Aqueous Solution Using RSM According to the CCD Method [Volume 18, Issue 3, 2021, Pages 33-51]
Morovat, M. Investigation. effect. of mixed. matrix. membranes’. structural. parameters. on their. effective. gaseous. penetrant. diffusion. ratio using. CFD tools [Volume 19, Issue 4, 2022, Pages 3-19]
Mortaheb, H. R. Biofiltration of BTEX in a Mixture Bed of Bagasse and Activated Carbon Using Aspergillus Fungi [Volume 10, Issue 2, 2013, Pages 22-32]
Mortaheb, H.R. Effect of electrokinetic on biodegradation of fluorene and phenanthrene in soil [Volume 13, Issue 2, 2016, Pages 71-79]
Mortazavi, Y. Manganese Oxide Promoted LaCoO3 Nano-Perovskite for Oxidation of a Model Exhaust Gas [Volume 9, Issue 2, 2012, Pages 22-33]
Mortezaeikia, V. CO2 biofixation by Dunaliella Salina in batch and semi-continuous cultivations, using hydrophobic and hydrophilic poly ethylene (PE) hollow fiber membrane photobioreactors [Volume 13, Issue 1, 2016, Pages 47-59]
Mosayebi Behbahani, Reza Degradation of Acetic Acid to decrease COD by Photocatalytic Process in Wastewater: TiO2 catalyst with UV Process [Volume 21, Issue 4, 2024, Pages 37-47]
Mosayebi Dehkordi, B. Extension of Trout Fish Shelf Life by Ozone Treatment [Volume 8, Issue 1, 2011, Pages 14-19]
Moshkelani, M. Newtonian and Non-Newtonian Blood Flow Simulation after Arterial Stenosis- Steady State and Pulsatile Approaches [Volume 1, Issue 2, 2004, Pages 45-53]
Moslehi, P. Performance of Membrane Bioreactor in Removal of Heavy Metals from Industrial Wastewater [Volume 5, Issue 4, 2008, Pages 33-38]
Moslehi, P. Experimental Comparison of Two Modifications of Activated Sludge for Treatment of Furfural-Containing Wastewater [Volume 2, Issue 1, 2005, Pages 3-9]
Mostafavi, Fatemeh Relationship between the Microstructure and Gas Transport Properties of Polyurethane/Polycaprolactone Blends [Volume 13, Issue 3, 2016, Pages 78-88]
Mostafazadeh, N. Optimization of solvothermally synthesized ZIF-67 metal organic framework and its application for Cr(VI) adsorption from aqueous solution [Volume 15, Issue 4, 2018, Pages 27-47]
Mostoufi, N. Modeling of Vibration of a Fluidized Bed Cylindrical Shell [Volume 10, Issue 2, 2013, Pages 67-80]
Mostoufi, N. Unsteady-State Modeling of the Fluidized Bed Polyethylene Reactor [Volume 6, Issue 1, 2009, Pages 23-39]
Mostoufi, N. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
Mostoufi, N. Effect of Isopropanol on the Fluidization of Hydrophilic Titanium Nano-Powder [Volume 19, Issue 2, 2022, Pages 51-67]
Mostoufi, Navid A Comparative Study of Machine Learning Methods for Pyrolysis Yield Prediction [Volume 21, Issue 4, 2024, Pages 62-77]
Mostoufi, Navid Investigation of Solid Mixing in a Spherical Triaxe Mixer Using the Discrete Element Method [Volume 22, Issue 2, 2025, Pages 12-34]
Motamed, S. Seed Coat Soybean Peroxidase: Extraction and Biocatalytic Properties Determination [Volume 7, Issue 2, 2010, Pages 28-38]
Motevassel, M. Metal-Organic Frameworks in Systems of Drug Delivery: Review [Volume 20, Issue 1, 2023, Pages 36-50]
Mousavi, S.A. Prediction of the Effect of Polymer Membrane Composition in a Dry Air Humidification Process via Neural Network Modeling [Volume 13, Issue 1, 2016, Pages 73-83]
Mousavi, S.E Catalytic reduction of SO2 with CH4 to elemental sulfur: A comparative analysis of alumina, copper-alumina and nickel-alumina catalysts [Volume 15, Issue 3, 2018, Pages 94-107]
Mousavi, S.E. Investigation of Gas Hold-up and Bubble Behavior in a Split-Cylinder Airlift Reactor: Pseudo-Plastic Non-Newtonian Fluids [Volume 11, Issue 3, 2014, Pages 3-15]
Mousavi, Seyed Hamed Stochastic Comparisons of Probability Distribution Functions with Experimental Data in a Liquid-Liquid Extraction Column for Determination of Drop Size Distributions [Volume 14, Issue 3, 2017, Pages 82-95]
Mousavi, S. H. Electro-Coalescence of an Aqueous Droplet at an Oil–Water Interface with an Investigation of Secondary Droplets Formation [Volume 10, Issue 1, 2013, Pages 30-44]
Mousavi, S. M. Assessment of Bioavailability of Crude Oil in Three Different Agricultural Soils [Volume 12, Issue 1, 2015, Pages 3-12]
Mousavi, S. M. Multidimensional Dynamic Modeling of Milk Ultrafiltration Using Neuro-Fuzzy Method and a Hybrid Physical Model [Volume 5, Issue 2, 2008, Pages 3-22]
Mousavi, S. M. Effect of Time and Temperature on Moisture Content, Shrinkage, and Rehydration of Dried Onion [Volume 6, Issue 3, 2009, Pages 57-70]
Mousavi Dehghani, S. A. Solid Phase Equation of State Application for Wax Formation Prediction in Petroleum Mixtures [Volume 5, Issue 2, 2008, Pages 23-33]
Mousavi Dehghani, S. A. A hybrid neural–genetic algorithm for predicting pure and impure CO2 minimum miscibility pressure [Volume 3, Issue 4, 2006, Pages 44-59]
Movagharnejad, K. Predicting the coefficients of the Daubert and Danner correlation using a neural network model [Volume 15, Issue 2, 2018, Pages 78-90]
Movagharnejad, K. Prediction of the pharmaceutical solubility in water and organic solvents via different soft computing models [Volume 16, Issue 1, 2019, Pages 83-100]
Movagharnejad, K. Prediction of true critical temperature and pressure of binary hydrocarbon mixtures: A Comparison between the artificial neural networks and the support vector machine [Volume 16, Issue 2, 2019, Pages 14-40]
Movagharnejad, Kamyar Liquid-liquid equilibrium data prediction using large margin nearest neighbor [Volume 13, Issue 4, 2016, Pages 14-32]
Movagharnejad*, K. Experimental Study and Mathematical Modeling of the Osmotic Drying Process [Volume 12, Issue 3, 2015, Pages 15-32]
Movahedirad, S. Effect of Process Variables on Growth Kinetics of Lactose Particles in a Wet Spray Fluidized Bed Granulator [Volume 11, Issue 4, 2014, Pages 64-75]
Movahedirad, S. Bubble formation on a single orifice in a gas solid fluidized bed using digital image analysis [Volume 13, Issue 1, 2016, Pages 60-72]
Movahedirad, Salman Mixing of the Immiscible Liquids in the Entrance Region of a T-Type Chamber Using Laser Induced Fluorescence (LIF) Method [Volume 13, Issue 3, 2016, Pages 32-42]
Mozafari, M. Demuification of Water-in-Oil Emulsions by Means of Dielectrophoresis [Volume 17, Issue 3, 2020, Pages 24-40]
Mozaffari, A. Catalytic reduction of SO2 with CH4 to elemental sulfur: A comparative analysis of alumina, copper-alumina and nickel-alumina catalysts [Volume 15, Issue 3, 2018, Pages 94-107]
Mozdianfard, Mohamadreza Modification of the Isomerization Process to Improve Research Octane Number [Volume 21, Issue 3, 2024, Pages 66-82]
N
Nabati, A. Uncertainty Reduction of Metering System in Kharg Island Oil Terminal by Adjusting Pipe Line Volume Flow rate [Volume 8, Issue 3, 2011, Pages 64-77]
Nabavi, R. Multi-objective Genetic Optimization of Ethane Thermal Cracking Reactor [Volume 5, Issue 3, 2008, Pages 29-39]
Nabavi, R. Investigation of coke deposition and coke inhibition by organosul-fur compounds in the pyrolysis of naphtha in the get stirred reactor system [Volume 3, Issue 1, 2006, Pages 40-51]
Nabavi, S.R. Kinetic Study of Methanol to Propylene Process on High Silica H-ZSM5 Catalyst [Volume 10, Issue 4, 2013, Pages 16-27]
Nabian, N. Effect of Polymer Concentr ation on the Structure and Performance of Polysulf one Flat Membrane for CO 2 Absorption in Membrane Contactor [Volume 11, Issue 2, 2014, Pages 78-91]
Nabiyouni, G. Surface Adsorption of Polyethylene Glycol and Polyvinyl Alcohol with Variable Molecular Weights on Zinc Oxide Nanoparticles [Volume 8, Issue 1, 2011, Pages 20-30]
Naderi, Gh. Thermal and Morphological Properties of Thermoplastic Elastomer Nanocomposites Based on PA6/NBR [Volume 8, Issue 1, 2011, Pages 56-65]
Naeimpoor, F. Screening Effective Factors in Slurry Phase Bioremediation of 2,4,6-Trinitrotoluene (TNT) Contaminated Soil [Volume 8, Issue 2, 2011, Pages 29-40]
Naeimpoor, Fereshteh A Microcosm Study on P-Nitrophenol Biodegradation in Soil Slurry by Alcaligenes faecalis: Plackett-Burman Design [Volume 8, Issue 2, 2011, Pages 57-68]
Nafasi, Hayede Assessing the Impact of Hydraulic Retention Time and Sawdust on the Elimination of Pb and Co from Oily Wastewater via Vertical-Flow Constructed Wetlands (VFCWs) with Phragmites Australis Cultivation [Volume 21, Issue 1, 2024, Pages 66-80]
Najafipour, Iman Ultrasonic Distillation of Ethanol-Water Mixtures: Optimization Using Response Surface Methodology (RSM) [Volume 22, Issue 1, 2025, Pages 87-102]
Najafpour, G. Adsorption of Volatile Organic Compounds from Aqueous Solution by Granular Activated Carbon (GAC) in Batch System [Volume 8, Issue 4, 2011, Pages 50-56]
Najjarzadeh, H. Study on Pore and Surface Development of Activated Carbon Produced from Iranian Coal in a Rotary Kiln Reactor [Volume 10, Issue 3, 2013, Pages 27-38]
Nakhaei-Pour, A. The Effects of SiO2 and Al2O3 Binders on the Activity and Selectivity of Bifunctional Fe/HZSM-5 Catalyst in Fischer-Tropsch Synthesis [Volume 5, Issue 2, 2008, Pages 64-70]
Nakhostin Panahi, P. Coke Inhibition During Naphtha Pyrolysis [Volume 6, Issue 1, 2009, Pages 12-22]
Namjoo, A. Assessing Nanostarch-Nanoclay Composite Film as a Potentially Durable Environmental-Friendly Packaging Material [Volume 20, Issue 3, 2023, Pages 3-20]
Nanvakenari, Sara An investigation of heat and mass transfer enhancement of air dehumidification with addition of γ-Al2O3 nano-particles to liquid desiccant [Volume 13, Issue 4, 2016, Pages 96-112]
Naser Ahmadi, A. Experimental Investigation on the Solubility and Initial Rate of Absorption of CO2 in Mixture of Amine-Functionalized Ionic Liquids and Physical Solvents [Volume 12, Issue 1, 2015, Pages 68-77]
Nasr, M. CFD Simulations of Pressure Drop in KATAPAK-S Structured Packing [Volume 2, Issue 2, 2005, Pages 64-71]
Nasr Esfahany, M. CFD Investigation of Hydrodynamics in an Industrial Suspension Polymerization Mixing Reactor [Volume 9, Issue 2, 2012, Pages 43-53]
Nasr Esfahany, M. Adsorption and Desorption Process of Chromium Ions Using Magnetic Iron Oxide Nanoparticles and Its Relevant Mechanism [Volume 14, Issue 3, 2017, Pages 31-40]
Nasrifar, K. Group Contribution Method for Predicting the Phase Behavior of Binary Mixtures Containing Carbon Dioxide [Volume 9, Issue 1, 2012, Pages 12-22]
Nasrifar, Kh. Prediction of Liquid-Liquid Equilibria of Binary Systems Containing Alcohols Using EoS-GE Models [Volume 7, Issue 4, 2010, Pages 12-21]
Navarchian, A.H Response Surface Methodology for Investigating the Effects of Hydrolysis Reaction Parameters on Molecular Structure and Performance of Polyvinyl Alcohol as Primary Suspending Agent [Volume 14, Issue 1, 2017, Pages 52-66]
Nazari, M. Prediction of polyvinyl alcohol (PVOH) properties synthesized at various conditions by artificial neural networks technique [Volume 14, Issue 2, 2017, Pages 3-16]
Nazari, M. Synthesis, Characterization and Analysis of Thermal Properties and burning rate of Zr/BaCrO4 mixture [Volume 20, Issue 2, 2023, Pages 3-14]
Nedjar, Z. Electrochemistry of Copper Activation of Sphalerite and Potassium Isobutyl Xanthate (KIBX) Synthesized Collectors Adsorption [Volume 10, Issue 4, 2013, Pages 55-64]
Negm, A. Cyclic Voltammetry of Cobalt Chloride with L- Carrageenan (LK) Using Glassy Carbon Electrode [Volume 14, Issue 4, 2017, Pages 90-99]
Nejad, Gh. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]
Nema, S.K. Energy Recovery Study for Polyethylene and Cotton by Thermal Plasma Degradation [Volume 10, Issue 3, 2013, Pages 3-13]
Nemati Arbatani, H. The Synthesis of SAPO-34 at Different Crystallization Temperature and its Catalytic Performance for Methanol to Olefins Reaction [Volume 11, Issue 4, 2014, Pages 31-39]
Nemati Arbatani, H. Effect of Crystallization Temperature on the Synthesis of SAPO-34 and its Catalytic Performance in MTO Reaction [Volume 11, Issue 3, 2014, Pages 16-25]
Nemati Lay, E. On the Selection of Proper Thermodynamic Conditions for the Gas Antisolvent Process (GAS) at Nearcritical and Supercritical Conditions [Volume 3, Issue 4, 2006, Pages 17-22]
Niaei, A. Kinetic Study of Methanol to Propylene Process on High Silica H-ZSM5 Catalyst [Volume 10, Issue 4, 2013, Pages 16-27]
Niaei, A. Abatement of Benzyl Alcohol and Methyl Ethyl Ketone (MEK) from Polluted Air Over Nanostructured Mn -Supported Alumina Catalyst [Volume 8, Issue 1, 2011, Pages 31-37]
Niaei, A. Coke Inhibition During Naphtha Pyrolysis [Volume 6, Issue 1, 2009, Pages 12-22]
Niaei, A. CFD Simulation of Catalytic Combustion of Benzene [Volume 6, Issue 4, 2009, Pages 34-44]
Niaei, A. Multi-objective Genetic Optimization of Ethane Thermal Cracking Reactor [Volume 5, Issue 3, 2008, Pages 29-39]
Niaei, A. Investigation of coke deposition and coke inhibition by organosul-fur compounds in the pyrolysis of naphtha in the get stirred reactor system [Volume 3, Issue 1, 2006, Pages 40-51]
Niaei, A. SHAHAB-A PC-Based Software for Simulation of Steam Cracking Furnaces (Ethane and Naphtha) [Volume 1, Issue 2, 2004, Pages 55-70]
Niaei, A. Catalytic oxidation of toluene over LaBO3 (B= Fe, Mn and Co) and LaCo0.7B′0.3O3 (B′= Fe and Mn) perovskite-type [Volume 14, Issue 1, 2017, Pages 67-73]
Niaei, A. CFD modeling for selective formation of propylene from methanol over synthesized Mn-substituted MFI metallosilicate catalyst [Volume 15, Issue 2, 2018, Pages 22-37]
Niaei, A. Experimental and Kinetic Study of CO Oxidation Over LaFe1-xCuxO3 (x=0, 0.2, 0.4, 0.6) Perovskite-Type Oxides [Volume 15, Issue 2, 2018, Pages 91-102]
Niaki, K.S. Comparative Study on Space Qualified Paints Used for Thermal Control of a Small Satellite [Volume 6, Issue 2, 2009, Pages 50-62]
Niazi, M. Electrospun Acellular Heart ECM for Cardiac Tissue Engineering [Volume 18, Issue 1, 2021, Pages 3-15]
Niazmand, H. Convective Heat Transfer of Nanofluids Flows Through an Isothermally Heated Curved Pipe [Volume 8, Issue 2, 2011, Pages 81-97]
Nigam, K.D.P. A Comparative Study of Machine Learning Methods for Pyrolysis Yield Prediction [Volume 21, Issue 4, 2024, Pages 62-77]
Niknam, M. Looped Pipeline System for Increasing the Capacity of Natural Gas Transmission [Volume 7, Issue 1, 2010, Pages 76-86]
Niknam, M.H. Application of a Kinetic Model for Studying Impurities Effect on Crystallization of NaCl, KBr, ADP and Sucrose Solutions [Volume 9, Issue 2, 2012, Pages 3-12]
Nikpour, M. Lipase Immobilized into Novel GPTMS: TMOS Derived Sol-Gels and Its Application for Biodiesel Production from Waste Oil [Volume 13, Issue 1, 2016, Pages 32-46]
Nikravesh, Golara A Density Functional Theory (DFT) Investigation on the Impact of the Linker Length in Zinc Oxide-Based Metal-Organic-Frameworks for Hydrogen Adsorption [Volume 21, Issue 1, 2024, Pages 30-50]
Niksiar, A. Mathematical Modeling of Fluorination Reaction of Uranium Dioxide and Evaluation of Existing Gas-Solid Reaction Models [Volume 6, Issue 2, 2009, Pages 63-74]
Nikzad, M. Extraction of pectin from sour orange and its application as the adsorbent for removal of nickel from aqueous solution: Kinetic and equilibrium study [Volume 15, Issue 2, 2018, Pages 3-21]
Noei, S. H. An Experimental and Theoretical Investigation on Thermal Performance of a Gas-Liquid Thermosyphon Heat Pipe Heat Exchanger in a Semi-Industrial Plant [Volume 6, Issue 3, 2009, Pages 13-25]
Noie, S. H. CuO/ Water Nanofluid Heat Transfer Through Triangular Ducts [Volume 9, Issue 1, 2012, Pages 23-32]
NoieBaghban, S. H. Thermal Conductivity of Water Based Nanofluids Containing Decorated Multi Walled Carbon Nanotubes with Different Amount of TiO2 Nanoparticles [Volume 12, Issue 1, 2015, Pages 30-40]
Noroozi, B. Investigation on the capability of Silkworm Pupa as a Natural Adsorbent for Removal of Dyes from Textile Effluent [Volume 1, Issue 2, 2004, Pages 39-44]
Norouzi, Mahdi Optimization of the Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide Based Respiratory Air Tablets Using the Taguchi Method [Volume 18, Issue 4, 2021, Pages 81-98]
Norouzi, Mahdi Optimization of Electrospinning Conditions for the Preparation of Ethyl Cellulose (EC) Nanofibers (NF) Based on the Taguchi Method [Volume 21, Issue 1, 2024, Pages 81-97]
Nosrati, M. Optimization of factors affecting on sulfide oxidation from synthetic spent caustic by Haloalkaliphilic Thioalkalivibrio versutus by focus on sodium ion effect: Application of response surface methodology [Volume 14, Issue 1, 2017, Pages 74-87]
Nourouzpour, M. M. Optimization of cultivation conditions of Candida catenulata in synthesizing acidic sophorolipid [Volume 20, Issue 3, 2023, Pages 54-69]
O
Olad, A. Preparation and Characterization of Polyaniline/CaCO3 Composite and its Application as Anticorrosive Coating on Iron [Volume 5, Issue 2, 2008, Pages 45-54]
Omidi, I. A Numerical Simulation Model of Solid Acid Fuel Cell Performance by CsH2PO4 Electrolyte [Volume 14, Issue 2, 2017, Pages 17-32]
Omidi, M. An AHP-Delphi Multi-Criteria Decision Making Model with Application to Environmental Decision-Making [Volume 8, Issue 2, 2011, Pages 3-17]
Omidi, R. Synthesis, Characterization and Analysis of Thermal Properties and burning rate of Zr/BaCrO4 mixture [Volume 20, Issue 2, 2023, Pages 3-14]
Omidifar, M Optimization of Hydrogen Distribution Network by Imperialist Competitive AlgorithmIn [Volume 13, Issue 3, 2016, Pages 63-77]
Omidkhah, Mohammadreza Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]
Omidkhah, M.R Biofouling Behavior on Forward Osmosis Using Vertically Aligned CNT Membrane on Alumina [Volume 16, Issue 2, 2019, Pages 1-13]
Omidvar Langroudi, Leila An investigation of heat and mass transfer enhancement of air dehumidification with addition of γ-Al2O3 nano-particles to liquid desiccant [Volume 13, Issue 4, 2016, Pages 96-112]
Oromiehie, A. Studies of Migration of Styrene Monomer from Polystyrene Packaging into the Food Simulant [Volume 8, Issue 4, 2011, Pages 43-49]
Oudi, A. H. Investigation of the effect of DamKohler and Stanton non-dimensional numbers on the stability of continuous stirred tank reactors [Volume 18, Issue 2, 2021, Pages 48-58]
Oudi, A. H. Screening of important factors affecting the process of ammonia synthesis by Plackett-Burman method and process optimization with RSMScreening the Important Factors Affecting the Process of Ammonia Synthesized by the Plackett-Burman Method and the Process Optimization with RSM [Volume 19, Issue 2, 2022, Pages 3-20]
Oudi, A.H Simulation and investigation of thermodynamics and energy of methanol purification unit [Volume 19, Issue 3, 2022, Pages 95-107]
Oudi, A.H. Optimization of the homogeneous rhodium-catalyzed methanol carbonylation reactor to reduce CO2 emissions [Volume 19, Issue 3, 2022, Pages 50-68]
Ovaysi, S. Developing a Mathematical Model to Predict the Behavior of a Supersonic Superheated Steam Flow inside a Laval Nozzle [Volume 17, Issue 2, 2020, Pages 56-69]
Ovaysi, S. Synthesis, Characterization and Analysis of Thermal Properties and burning rate of Zr/BaCrO4 mixture [Volume 20, Issue 2, 2023, Pages 3-14]
Ovaysi, Saeed CFD Modeling and Industrial Evaluation of a Cyclone Cascade for the Production of the HDPE Catalyst [Volume 18, Issue 3, 2021, Pages 74-85]
Ovaysi, Saeed Low-Cost and Green Synthesis of the Disodium Salt of Hydroquinone: the Investigation of its Physical and Chemical Properties and Crystal Structure [Volume 21, Issue 2, 2024, Pages 29-42]
Ozairy, R. Developing genetic algorithm-based neural networks and sensitivity analysis for thermal conductivity of natural gases [Volume 17, Issue 2, 2020, Pages 44-55]
P
Pahlavanzadeh, H. Catalytic reduction of SO2 with CH4 to elemental sulfur: A comparative analysis of alumina, copper-alumina and nickel-alumina catalysts [Volume 15, Issue 3, 2018, Pages 94-107]
Pahlavanzadeh, Hassan An investigation of heat and mass transfer enhancement of air dehumidification with addition of γ-Al2O3 nano-particles to liquid desiccant [Volume 13, Issue 4, 2016, Pages 96-112]
Pahlavanzadeh, Hassan Experimental Measurement and Thermodynamic Modeling of CO2 Absorption in a Wide Range of Aqueous MDEA Solutions (10-98 wt%) [Volume 21, Issue 3, 2024, Pages 14-33]
Pahlevanzadeh, H. Biosorption of cobalt (II) by Inta ct and Chemically Modified Brown Algae: Optimization Using Resp onse Surface Methodology and Equilibrium, Dynamics and Thermodynamics Studies [Volume 11, Issue 2, 2014, Pages 56-77]
Panadare, D. C. Applications of Waste Cooking Oil Other Than Biodiesel: A Review [Volume 12, Issue 3, 2015, Pages 55-76]
Panahadeh, Adel Optimization of the Adsorption of Pb(II) and Zn(II) onto the EDTA-Modified MnO2/Chitosan/Fe3O4 Nanocomposite from an Aqueous Solution Using RSM According to the CCD Method [Volume 18, Issue 3, 2021, Pages 33-51]
Panahi, P. Investigation of coke deposition and coke inhibition by organosul-fur compounds in the pyrolysis of naphtha in the get stirred reactor system [Volume 3, Issue 1, 2006, Pages 40-51]
Panahi, R. Determination of Adsorption Isotherm for L-Lysine Imprinted Polymer [Volume 5, Issue 4, 2008, Pages 49-55]
Pandey, J. Kinetic, mechanistic and thermodynamic investigations on Iridium (III) catalyzed oxidation of D-Mannitol by N-chloro-p-toluenesulfonamide in perchloric acid medium [Volume 14, Issue 4, 2017, Pages 77-89]
Panjeshahi, M. H. Optimization of Integrated Low-Temperature Gas Separation Processes Using SA Method and Different Refrigerants [Volume 6, Issue 4, 2009, Pages 27-33]
Parnian, M.M. Surfactant Remediation of LNAPL Contaminated Soil; Effects of adding alkaline and foam producing substances [Volume 5, Issue 2, 2008, Pages 34-44]
Parvareh, A. Experimental and CFD Studies on the Effect of the Jet Position on Mixing Performance [Volume 6, Issue 3, 2009, Pages 3-12]
Parvareh, A. Experimental and CFD Study of the Tube Configuration Effect on the Shell-Side Thermal Performance in a Shell and Helically Coiled Tube Heat Exchanger [Volume 12, Issue 2, 2015, Pages 13-25]
Parvareh, A. Investigation of mercaptan removal from Kerosene using passive mixing tools: Experimental study and CFD modeling [Volume 14, Issue 3, 2017, Pages 55-64]
Parvareh, A. Biodiesel production from soybean oil using ionic liquid as a catalyst in a microreactor [Volume 15, Issue 1, 2018, Pages 102-114]
Parvareh, A. Fabrication and Characterization of Polysulfone-Graphene Oxide Mixed Matrix Membranes for the Natural Gas Treatment [Volume 19, Issue 2, 2022, Pages 21-37]
Parvareh, A. Synthesize and application of Fe3O4/MW-CNT Composite in photo-catalyst-assisted electrochemical oxidation of BTX compounds from wastewater [Volume 20, Issue 1, 2023, Pages 54-66]
Parvareh, A. Prediction of erosion rate in gas-solid flow using computational fluid dynamics (CFD): focus on geometrical parameters [Volume 20, Issue 2, 2023, Pages 33-49]
Parvareh, Arsalan Optimization of the Adsorption of Pb(II) and Zn(II) onto the EDTA-Modified MnO2/Chitosan/Fe3O4 Nanocomposite from an Aqueous Solution Using RSM According to the CCD Method [Volume 18, Issue 3, 2021, Pages 33-51]
Parvareh, Arsalan Synthesize and Application of Fe3O4/MW-CNT Composite in Photo-Catalyst Assisted Electrochemical Oxidation of BTX Compounds from Wastewater [Volume 21, Issue 4, 2024, Pages 3-19]
Parvareh, Arsalan Experimental Study and CFD Modeling of Heat Transfer using Boehmite-Water Nanofluid in a Pilot Scale Shell and Tube Heat Exchanger [Volume 21, Issue 4, 2024, Pages 78-93]
Parvareh, Arsalan CFD Modelling of Solid-Liquid Two-Phase Flow in a Centrifugal Pump and investigation of the Effects of Fluid Flow Rate and Particle Concentration on Erosion Rate [Volume 22, Issue 3, 2025, Pages 50-67]
Parvari, M. Production of 1-Butene via Selective Ethylene Dimerization by Addition of Bromoethane as a New Promoter to Titanium-Based Catalyst in the Presence of Tetrahydropyran Modifier and Triethylaluminum Co-Catalyst [Volume 9, Issue 3, 2012, Pages 3-13]
Parvari, M. Methane Combustion and CO Oxidation on Ag-Doped LaMn0.8Cu0.2O3±δ Mixed Oxides Prepared by Pechini and Sol–Gel Methods [Volume 9, Issue 3, 2012, Pages 31-47]
Parvari, M. Effect of Mixer Rotational Speed on Heat Transfer Coefficient in Preparation of Nickle Perovskite From Laboratory to Bench Scale [Volume 6, Issue 3, 2009, Pages 71-87]
Parvari, Matin Preparation of Lanthanum–Nickel–Aluminium Perovskite Systems and their Application in Methane-Reforming Reactions [Volume 3, Issue 3, 2006, Pages 29-43]
Parvizi, F. Investigation of mercaptan removal from Kerosene using passive mixing tools: Experimental study and CFD modeling [Volume 14, Issue 3, 2017, Pages 55-64]
Parviziyan, Fahime Diazonium-Based Surface Functionalization of PES Nanofiltration Membranes for Improved Antifouling Properties and Heavy Metal Removal [(Articles in Press)]
Parvizsedghy, R. Production of Bio-Gasoline with High Octane Number, as a Renewable Transportation Biofuel, via Thermochemical Conversion of Castor Oil [Volume 17, Issue 3, 2020, Pages 3-23]
Pashai, E. Observations of Sludge Formation in Group I Base Stock for Lubricants and Thermodynamic Modeling with the SAFT Equation of State [Volume 14, Issue 2, 2017, Pages 33-47]
Patel, R. Kinetic, mechanistic and thermodynamic investigations on Iridium (III) catalyzed oxidation of D-Mannitol by N-chloro-p-toluenesulfonamide in perchloric acid medium [Volume 14, Issue 4, 2017, Pages 77-89]
Payan, A. Enhancing Photocatalytic Activity of Nitrogen Doped TiO2 for Degradation of 4-Chlorophenol under Solar Light Irradiation [Volume 15, Issue 3, 2018, Pages 3-14]
Pazouki, M. Catalytic Pyrolysis of General Purpose PolyStyrene Using Red Mud as a Catalyst [Volume 11, Issue 4, 2014, Pages 10-20]
Pazouki, M. Photocatalytic Decomposition of Epichlorohydrin by TiO 2 /Ag Coated Sintered Glass Filters [Volume 11, Issue 1, 2014, Pages 69-74]
Pazouki, M. Biological Conversion of Normal Chain Octadecane by Native Microbial Consortia [Volume 12, Issue 2, 2015, Pages 50-58]
Pazouki, M. Removal of Surfactants from wastewater by Rice Husk [Volume 3, Issue 3, 2006, Pages 44-50]
Pazouki, M. Decolorization of Distillery Wastewater by UV irradiated spores of Aspergillus fumigatus [Volume 2, Issue 2, 2005, Pages 49-55]
Pazouki, M. Lipase Immobilized into Novel GPTMS: TMOS Derived Sol-Gels and Its Application for Biodiesel Production from Waste Oil [Volume 13, Issue 1, 2016, Pages 32-46]
Pazouki, Mohammad Anaerobic Bioconversion of Heavy Hydrocarbons Using Native Consortia [Volume 6, Issue 1, 2009, Pages 40-49]
Pazouki, Mohammad Kinetics investigation of cell growth, xanthan production and sugar cane molasses consumption by Xanthomonas campestris [Volume 12, Issue 4, 2015, Pages 84-92]
Pecic, L.S. Desulfurization and demetalization of used engine oil in laboratory scale [Volume 15, Issue 1, 2018, Pages 73-88]
Peighambardoust, Seyed Jamaleddin Preparation of Flame Retardant Polystyrene via In-Situ Bulk Polymerization Method and Evaluation of its Flammability Properties [Volume 13, Issue 4, 2016, Pages 62-70]
Peighambardoust, S.J. Methanol crossover and selectivity of nafion/heteropolyacid/montmorillonite nanocomposite proton exchange membranes for DMFC applications [Volume 14, Issue 3, 2017, Pages 65-81]
Pirdadeh Beiranvand, Reza Low-Cost and Green Synthesis of the Disodium Salt of Hydroquinone: the Investigation of its Physical and Chemical Properties and Crystal Structure [Volume 21, Issue 2, 2024, Pages 29-42]
Pirdashti, H. An AHP-Delphi Multi-Criteria Decision Making Model with Application to Environmental Decision-Making [Volume 8, Issue 2, 2011, Pages 3-17]
Pirdashti, M. An AHP-Delphi Multi-Criteria Decision Making Model with Application to Environmental Decision-Making [Volume 8, Issue 2, 2011, Pages 3-17]
Pirdashti, M. Effective Parameters on the Partition Coefficient of Guanidine Hydrochloride in the Poly (Ethylene Glycol) +Phosphate +Water System at 298.15 K [Volume 7, Issue 1, 2010, Pages 67-75]
Pirdashti, M. Effects of Height to Diameter Ratio and Aeration rate on Liquid Mixing and Hydrodynamic Properties in a Bubble Column [Volume 6, Issue 3, 2009, Pages 46-56]
Pirdashti, Mohsen Liquid-liquid equilibrium data prediction using large margin nearest neighbor [Volume 13, Issue 4, 2016, Pages 14-32]
Pirie, P. A Microcosm Study on P-Nitrophenol Biodegradation in Soil Slurry by Alcaligenes faecalis: Plackett-Burman Design [Volume 8, Issue 2, 2011, Pages 57-68]
Piryaee, M. Optimizing of Synthesis of High Purity HMX Using Polyphosphoric Acid by Response Surface Method [Volume 20, Issue 2, 2023, Pages 50-61]
Pirzadeh, K. Optimization of solvothermally synthesized ZIF-67 metal organic framework and its application for Cr(VI) adsorption from aqueous solution [Volume 15, Issue 4, 2018, Pages 27-47]
Poorabdollah, M. Modified and unmodified Graphite/unsaturated polyester resin composites: thermal and mechanical behavior [Volume 17, Issue 2, 2020, Pages 14-33]
Pouladian, Soheil Reducing the Environmental Impact of Thermal Power Plants: A Case Study [Volume 22, Issue 2, 2025, Pages 86-99]
Pourafshary, P. Rapid Estimation of Water Flooding Performance and Optimization in EOR by Using Capacitance Resistive Model [Volume 9, Issue 4, 2012, Pages 3-16]
Pourshayan, A. EbrahimModeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]
Prakash, B. Development and Evaluation of the Magnesium Potassium Phosphate Cement Based Refractory [Volume 17, Issue 4, 2020, Pages 69-78]
R
Rabbani, A. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]
Rabbani, Y. Modeling and Simulation of the Magnetorheological Fluid Sleeve Valve [Volume 18, Issue 1, 2021, Pages 25-35]
Rabbani,, Y. An Investigation of the Effects of Dopamine on the Superhydrophobicity of Carbonyl Iron Particles with Stearic Acid [Volume 17, Issue 4, 2020, Pages 49-59]
Raeisi, M. Groundwater Denitrification by Using MBBR With KMT Packing [Volume 17, Issue 4, 2020, Pages 60-68]
Rafie Lak, A. Designing a glycemic control strategy to maintain glucose homeostasis and prevent hypoglycemia for subjects with type 1 diabetes [Volume 15, Issue 3, 2018, Pages 34-52]
Rahba, A. Investigation of Packing Effect on Mass Transfer Coefficient in a Single Drop Liquid Extraction Column [Volume 7, Issue 4, 2010, Pages 3-11]
Rahbari-sisakht, M. Reverse osmosis desalination using thin film composite polysulfone-zinc oxide mixed matrix membrane [Volume 20, Issue 1, 2023, Pages 67-77]
Rahimi, A. Mathematical Modeling of Fluorination Reaction of Uranium Dioxide and Evaluation of Existing Gas-Solid Reaction Models [Volume 6, Issue 2, 2009, Pages 63-74]
Rahimi, A. A Simple One-Dimensional Model for Investigation of Heat and Mass Transfer Effects on Removal Efficiency of Particulate Matters in a Venturi Scrubber [Volume 6, Issue 4, 2009, Pages 3-14]
Rahimi, M. Vetiver Oil Extraction Optimization Using Supercritical Carbon Dioxide Fluid [Volume 7, Issue 4, 2010, Pages 64-70]
Rahimi, M. Experimental and CFD Studies on the Effect of the Jet Position on Mixing Performance [Volume 6, Issue 3, 2009, Pages 3-12]
Rahimi, M. Experimental and CFD Study of the Tube Configuration Effect on the Shell-Side Thermal Performance in a Shell and Helically Coiled Tube Heat Exchanger [Volume 12, Issue 2, 2015, Pages 13-25]
Rahimi, M. Investigation of Liquid–Liquid Two-Phase Flow Pattern in Microreactors for Biodiesel Production [Volume 12, Issue 3, 2015, Pages 32-40]
Rahimi, M. Experimental Study on the Effect of Heat Loads, Fill Ratio and Extra Volume on Performance of a Partial-Vacuumed Thermosyphon [Volume 6, Issue 4, 2009, Pages 15-26]
Rahimi, M. An optimization study by response surface methodology (RSM) on viscosity reduction of residue fuel oil exposed ultrasonic waves and solvent injection [Volume 13, Issue 1, 2016, Pages 3-19]
Rahimi, M. Ultrasound-Assisted Biodiesel Production in microreactors [Volume 13, Issue 2, 2016, Pages 22-32]
Rahimi, M. Waste water ammonia stripping intensification using microfluidic system [Volume 14, Issue 4, 2017, Pages 17-31]
Rahimi, M. Biodiesel production from soybean oil using ionic liquid as a catalyst in a microreactor [Volume 15, Issue 1, 2018, Pages 102-114]
Rahimi, M. Microfluidic extraction of tannic acid from Quercus leaves [Volume 15, Issue 3, 2018, Pages 15-33]
Rahimi, M. Propionic acid extraction in a microfluidic system: simultaneous effects of channel diameter and fluid flow rate on the flow regime and mass transfer [Volume 15, Issue 4, 2018, Pages 48-62]
Rahimi, M. Increasing flow capacity and reducing drag in microtubes using drag-reducing polymer [Volume 17, Issue 2, 2020, Pages 70-87]
Rahimi, M. Developing a Mathematical Model to Predict the Behavior of a Supersonic Superheated Steam Flow inside a Laval Nozzle [Volume 17, Issue 2, 2020, Pages 56-69]
Rahimi, M. Cooling Enhancement of a Photovoltaic Panel Through Ferrofluid Stimulation Using a Magnetic-Wind Turbine [Volume 16, Issue 4, 2019, Pages 35-52]
Rahimi, M. Application of the Adaptive Neuro-Fuzzy Inference System (ANFIS) and Sobol Approaches for Modeling and Sensitivity Analysis of the Biosorption of Triglyceride from the Blood Serum [Volume 19, Issue 1, 2022, Pages 51-65]
Rahimi, Masoud High-Precision Neuro-Fuzzy Modeling of Pressure Loss in Coiled Flow Inverters Using CFD Data [Volume 22, Issue 3, 2025, Pages 3-17]
Rahimi, R. Modeling and Simulation of a Divided Wall Column for 1,3 Butadiene Purification [Volume 12, Issue 1, 2015, Pages 60-67]
Rahimi, R. CFD Simulations of Pressure Drop in KATAPAK-S Structured Packing [Volume 2, Issue 2, 2005, Pages 64-71]
Rahimi, Rahbar Simulation, Control and Experimental Analysis of 1,3Butadiene Purification Unit [Volume 13, Issue 4, 2016, Pages 33-45]
Rahimi-Ahar, Zohreh Theoretical study of multi-stage and multi-feeding variable pressure humidification-dehumidification (VP-HD) desalination systems [Volume 21, Issue 1, 2024, Pages 17-29]
Rahimi Fard, M. An Egg-Shell Pd-Ag/ α -Al 2 O 3 Catalyst for Tail-End Acetylene Selective Hydrogenation [Volume 11, Issue 1, 2014, Pages 42-54]
Rahimi Fard, M. The Effect of the Method of Adding Impregnation Solutions on the Properties and Performance of the Pd-Ag/Al2O3 Catalyst in the Tail-End Acetylene Selective Hydrogenation. [Volume 18, Issue 2, 2021, Pages 19-30]
Rahimpour, A. Fabrication and Evaluation of Functionalized Nano-titanium Dioxide (F-NanoTiO2)/ polysulfone (PSf) Nanocomposite Membranes for Gas Separation [Volume 11, Issue 4, 2014, Pages 40-49]
Rahimpour, F. Effective Parameters on the Partition Coefficient of Guanidine Hydrochloride in the Poly (Ethylene Glycol) +Phosphate +Water System at 298.15 K [Volume 7, Issue 1, 2010, Pages 67-75]
Rahimpour, Farshad Liquid-liquid equilibrium data prediction using large margin nearest neighbor [Volume 13, Issue 4, 2016, Pages 14-32]
Rahimpour, Farshad Isolation and Identification of a Bacterial Strain Producing Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) from Municipal Landfill Soil [Volume 22, Issue 4, 2025, Pages 43-55]
Rahimpour, Mohammad Reza Simultaneous high hydrogen content-synthesis gas production and in-situ CO2 removal via sorption-enhanced reaction process: modeling, sensitivity analysis and multi-objective optimization using NSGA-II algorithm [Volume 13, Issue 4, 2016, Pages 71-95]
Rahimpour, M. R. Comparative Study of Two Various Percent of CO Injection Effect to Cascade Methanol Synthesis Reactor in the Presence of Long-term Catalyst Deactivation [Volume 8, Issue 2, 2011, Pages 69-80]
Rahimpour, M. R. Investigation of CO Injection Effect on the Methanol Production in a Single Type Reactor in the Presence of Catalyst Deactivation [Volume 7, Issue 3, 2010, Pages 29-48]
Rahimpour, M.R. Enhancement of Hydrogen and Methanol Production using a Double Fluidized-bed Two Membranes Reactor [Volume 13, Issue 3, 2016, Pages 3-18]
Rahman, M. M. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]
Rahmani, A. R. Degradation of Azo Dye Reactive Black 5 and Acid Orange 7 by Fenton-Like Mechanism [Volume 7, Issue 1, 2010, Pages 87-94]
Rahmani, F. Comparative Study of Two Various Percent of CO Injection Effect to Cascade Methanol Synthesis Reactor in the Presence of Long-term Catalyst Deactivation [Volume 8, Issue 2, 2011, Pages 69-80]
Rahmani, F. Investigation of CO Injection Effect on the Methanol Production in a Single Type Reactor in the Presence of Catalyst Deactivation [Volume 7, Issue 3, 2010, Pages 29-48]
Rahmanian, M. Modeling and Simulation of a Divided Wall Column for 1,3 Butadiene Purification [Volume 12, Issue 1, 2015, Pages 60-67]
Rahmanzadeh derisi, M. Effect of Solvent on the Optimal Thermodynamic Conditions of Ternary System (CO2, Alcohol, Ampicillin) in GAS Process [Volume 17, Issue 1, 2020, Pages 37-46]
Rahmanzadeh Derisi, M. Determining the Optimal Thermodynamic Conditions of Ternary Systems Containing (CO2, Solvent, 5-Fluorouracil) in the GAS Process [Volume 19, Issue 1, 2022, Pages 3-14]
Rahmati, A. Uranium Extraction from Solid Waste as Nitrate Complex with D2EHPA, TOPO and their Synergistic Mixture [Volume 10, Issue 4, 2013, Pages 28-42]
Rajabi, L. Thermal Stability and Dynamic Mechanical Properties of Nano and Micron-TiO2 Particles Reinforced Epoxy Composites: Effect of Mixing Method [Volume 10, Issue 1, 2013, Pages 16-29]
Rajabi, L. Modified and unmodified Graphite/unsaturated polyester resin composites: thermal and mechanical behavior [Volume 17, Issue 2, 2020, Pages 14-33]
Rajendran, V. Phase-transfer catalysis for synthesis of ethyl 2-(4-nitrophenoxy)acetate under sonication- kinetic aspects [Volume 13, Issue 2, 2016, Pages 80-87]
Rajendran, Venugopal Synthesis of 1-(isopentyloxy)-4-nitrobenzene under ultrasound assisted liquid-liquid phase-transfer catalysis [Volume 13, Issue 3, 2016, Pages 54-62]
Ramakrishna, S. Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]
Ramazani, A. Comparison between to versions of the SAFT EOS in the study of PVT and VLE phase behavior of pure polymer melts and binary polymer solutions [Volume 3, Issue 2, 2006, Pages 33-51]
Ramazani, A. A review on the effects of fillers on gas separation Mixed Matrix Membranes [Volume 19, Issue 3, 2022, Pages 3-28]
Ramazani, S.A. Preparation of Ultra High Molecular Weight Polyethylene Using Ziegler-Natta Catalyst System: Optimization of Parameters by Response Surface Methodology [Volume 11, Issue 1, 2014, Pages 55-62]
Ramezani, Pouneh Fabricating a Polysulfone-ZIF-8 Composite Membrane for Separating CO2 and CH4 [Volume 21, Issue 3, 2024, Pages 3-13]
Ramin, L. Soy Protein Isolate and Gum Arabic Composite Affects Stability of Beverage Emulsion [Volume 6, Issue 2, 2009, Pages 3-13]
Ranjbar, Atieh Effect of Synthesis Method and Nickel-Copper Loading on Ni-Cu-Al Catalysts for Production of Hydrogen Via Ethanol Steam Reforming [Volume 21, Issue 1, 2024, Pages 51-61]
Ranjbar, M. Development of an Improved Sub-Molten Salt Method for Production of Potassium Titanate from Ilmenite under Industrial Conditions [Volume 10, Issue 3, 2013, Pages 60-75]
Ranjbar, S. Mathematical Modeling for Volatile Organic Compounds Removal in a Biofilter: Model Validation and Sensitivity Analysis [Volume 10, Issue 3, 2013, Pages 76-87]
Ranjbara, A. Effect of MgAl2O4 catalyst support synthesis method on the catalytic activity of nickel Nano catalyst in reverse water gas shift reaction [Volume 16, Issue 3, 2019, Pages 58-69]
Rasekh, A.R. Uncertainty Reduction of Metering System in Kharg Island Oil Terminal by Adjusting Pipe Line Volume Flow rate [Volume 8, Issue 3, 2011, Pages 64-77]
Rashedi, Fatemeh Degradation of Acetic Acid to decrease COD by Photocatalytic Process in Wastewater: TiO2 catalyst with UV Process [Volume 21, Issue 4, 2024, Pages 37-47]
Rashidi, A. Convective Heat Transfer Enhancement of CNT-Water Nanofluids in Plain Tube Fitted with Wire Coil Inserts [Volume 11, Issue 2, 2014, Pages 43-55]
Rashidi Zonouz, P. Experimental and Kinetic Study of CO Oxidation Over LaFe1-xCuxO3 (x=0, 0.2, 0.4, 0.6) Perovskite-Type Oxides [Volume 15, Issue 2, 2018, Pages 91-102]
Rashidzadeh, A. Preparation and Characterization of Polyaniline/CaCO3 Composite and its Application as Anticorrosive Coating on Iron [Volume 5, Issue 2, 2008, Pages 45-54]
Rashidzadeh, M. Monolithic Three-way Palladium Catalytic Converters for Automobile Exhaust Emission Control [Volume 2, Issue 1, 2005, Pages 61-70]
Rashtchian, D. Effects of Vertical Temperature Gradient on Heavy Gas Dispersion in Build up Area [Volume 6, Issue 3, 2009, Pages 26-45]
Rasteh, M. CFD simulation for segregation behavior of a ternary mixture in a bubbling fluidized bed: effect of solid wall boundary condition [Volume 15, Issue 3, 2018, Pages 53-71]
Rasteh, M. Segregation patterns of an equidensity TiO2 ternary mixture in a conical fluidized bed: CFD and experimental study [Volume 16, Issue 2, 2019, Pages 41-56]
Rathod, Virendra K. Effect of Ethanol Concentration in Ultrasound Assisted Extraction of Glycyrrhizic Acid from Licorice Root [Volume 11, Issue 4, 2014, Pages 21-30]
Rathod*, V. K. Applications of Waste Cooking Oil Other Than Biodiesel: A Review [Volume 12, Issue 3, 2015, Pages 55-76]
Razavi, Seyed Mohammad A Comparative Study of Machine Learning Methods for Pyrolysis Yield Prediction [Volume 21, Issue 4, 2024, Pages 62-77]
Razavi-Nouri, M. Creep and Stress Relaxation Behavior of Polypropylene, Metallocene-Prepared Polyethylene and their Blends [Volume 9, Issue 1, 2012, Pages 60-69]
Razavizadeh, H. Solvent Extraction of Zinc from Acidic Solution Obtained from Cold Purification Filter Cake of Angouran Mine Concentrate Using D2EHPA [Volume 8, Issue 3, 2011, Pages 43-47]
Razmjoo, A. Asymptotic Analysis of Binary Gas Mixture Separation by Nanometric Tubular Ceramic Membranes: Cocurrent and Countercurrent Flow Patterns [Volume 3, Issue 3, 2006, Pages 3-16]
Razzaghi, K. A Survey for the Selection of Control Structure for Distillation Columns Based on Steady State Controllability Indexes [Volume 6, Issue 2, 2009, Pages 29-36]
Razzaghi, K. Robust control of a high-purity disttilation column using synthesis [Volume 3, Issue 2, 2006, Pages 20-32]
Razzaghi, M. Application of artificial neural network in deoxygenation of water by glucoseoxidase immobilized in calcium alginate/MnO2 composite [Volume 15, Issue 3, 2018, Pages 82-93]
Rekabdar, F. Chemical Cleaning of Utafiltration Membrane after Treatment of Oily Wastewater [Volume 7, Issue 3, 2010, Pages 17-28]
Revstedt, J. A Study on Liquid-liquid Mixing in a Stirred Tank with a 6-Blade Rushton Turbine [Volume 5, Issue 4, 2008, Pages 12-22]
Revstedt, J. A Study of Flow and Mixing in Bubbly Gas-Liquid Pipe Flow Generated by a Grid [Volume 3, Issue 4, 2006, Pages 60-75]
Rezaee, S. Crosslinked Electrospun Poly (Vinyl Alcohol) Nanofibers Coated by Antibacterial Copper Nanoparticles [Volume 11, Issue 3, 2014, Pages 45-58]
Rezaei, E. An NLP Approach for Evolution of Heat Exchanger Networks Designed by Pinch Technology [Volume 5, Issue 1, 2008, Pages 13-21]
Rezaei, E. An Efficient Coupled Genetic Algorithm-NLP Method for Heat Exchanger Network Synthesis [Volume 5, Issue 1, 2008, Pages 22-33]
Rezaei, H. Developing a Mathematical Model to Predict the Behavior of a Supersonic Superheated Steam Flow inside a Laval Nozzle [Volume 17, Issue 2, 2020, Pages 56-69]
Rezaei, M. Synthesis, Characterization and Analysis of Thermal Properties and burning rate of Zr/BaCrO4 mixture [Volume 20, Issue 2, 2023, Pages 3-14]
Rezaei, R. Prediction of the Effect of Polymer Membrane Composition in a Dry Air Humidification Process via Neural Network Modeling [Volume 13, Issue 1, 2016, Pages 73-83]
Rezazadeh, Sh. Application of Multistage Steam Distillation Column for Extraction of Essential Oil of Valeriana officinialis L. Cultivated in Iran [Volume 10, Issue 4, 2013, Pages 79-84]
Rezazadeh, Sh. Instability Analysis of Miscible Displacements in Homogeneous Porous Media [Volume 9, Issue 4, 2012, Pages 25-32]
Rezazadeh, Sh. Application of Multistage Steam Distillation Column for Extraction of Essential Oil of Rosemarinuse officinialis L. [Volume 9, Issue 4, 2012, Pages 54-64]
Rezvanipou, M. Catalytic Pyrolysis of General Purpose PolyStyrene Using Red Mud as a Catalyst [Volume 11, Issue 4, 2014, Pages 10-20]
Rezvan Leylan, Seyed Alireza Optimization of Electrospinning Conditions for the Preparation of Ethyl Cellulose (EC) Nanofibers (NF) Based on the Taguchi Method [Volume 21, Issue 1, 2024, Pages 81-97]
Rezvan Leylan, Seyyed Alireza Optimization of the Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide Based Respiratory Air Tablets Using the Taguchi Method [Volume 18, Issue 4, 2021, Pages 81-98]
Rimu, S.H. Evaluation of Cr (VI) ion removal from aqueous solution by bio-inspired chitosan-clay composite: Kinetics and isotherms [Volume 15, Issue 4, 2018, Pages 63-80]
Roosta, A.A. Optimization of Semiregenerative Catalytic Naphtha Reforming Unit to Enhance Octane Number and Reformate Yield [Volume 15, Issue 2, 2018, Pages 52-64]
Roostaazad, R. Immobilization of Rhizomucor miehei Lipase on High Density Polyethylene [Volume 1, Issue 2, 2004, Pages 29-37]
Roozbehani, B. Enhancing Photocatalytic Activity of Nitrogen Doped TiO2 for Degradation of 4-Chlorophenol under Solar Light Irradiation [Volume 15, Issue 3, 2018, Pages 3-14]
Roshdi, S. Screening and Optimization of Gas Sweetening Process Parameters with MDEA-PZ Solvent using Plackett-Burman Approach [Volume 20, Issue 3, 2023, Pages 70-89]
Rostami, Kh. Comparison the performance of different reverse osmosis membrane modules by CFD modeling [Volume 16, Issue 1, 2019, Pages 101-116]
Roufegarinejad, L. A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]
S
Saadat, M. Surface Adsorption of Polyethylene Glycol and Polyvinyl Alcohol with Variable Molecular Weights on Zinc Oxide Nanoparticles [Volume 8, Issue 1, 2011, Pages 20-30]
Saadatmand, M. Developing Collagen Hydrogel Including Bioactive Glass Nanoparticles for being used in Bone Tissue Engineering [Volume 20, Issue 4, 2024, Pages 3-12]
Saadat Targhi, M. Uncertainty Reduction of Metering System in Kharg Island Oil Terminal by Adjusting Pipe Line Volume Flow rate [Volume 8, Issue 3, 2011, Pages 64-77]
Saberimoghadam, A. Reduction of Parasitic Currents in Simulation of Droplet Secondary Breakup with Density Ratio Higher than 60 by InterDyMFoam [Volume 11, Issue 2, 2014, Pages 29-42]
Saberimoghaddam, A. Parasitic Effect of Tube Wall Longitudinal Heat Conduction on Cryogenic Gas Temperature [Volume 14, Issue 1, 2017, Pages 15-25]
Saberimoghaddam, A. Transient thermal study of recuperative tube in tube heat exchanger operating in refrigeration system using experimental test and mathematical simulation [Volume 14, Issue 3, 2017, Pages 3-18]
Saberimoghaddam, A. Design and construction of a helium purification system using cryogenic adsorption process [Volume 15, Issue 1, 2018, Pages 89-101]
Sabzi, F. Prediction of Liquid-Liquid Equilibria of Binary Systems Containing Alcohols Using EoS-GE Models [Volume 7, Issue 4, 2010, Pages 12-21]
Sadeghi, J. Plantwide Control Structure of the Diethyl Oxalate Process Concerning: Safety and Process Improvement [Volume 19, Issue 4, 2022, Pages 52-75]
Sadeghi, Morteza Relationship between the Microstructure and Gas Transport Properties of Polyurethane/Polycaprolactone Blends [Volume 13, Issue 3, 2016, Pages 78-88]
Sadeghi, M. T. Continuous Lumping Model of an Industrial Refinery Isomax Reactor [Volume 7, Issue 2, 2010, Pages 39-50]
Sadeghi, M.T. Dynamic Simulation of an Industrial Rotary Dryer [Volume 7, Issue 2, 2010, Pages 68-77]
Sadeghi, M.T. Bubble formation on a single orifice in a gas solid fluidized bed using digital image analysis [Volume 13, Issue 1, 2016, Pages 60-72]
Sadeghi, N. Modification of Mixed Matrix Membranes' Famous Permeability Prediction Models by Considering the Formed Voids Around Nonporous Fillers [Volume 17, Issue 3, 2020, Pages 53-73]
Sadeghpour, Parisa Preparation of SAPO-34 Molecular Sieve Dual Template Using TEA and Morpholine: Influence of Crystallization Times on Catalyst Characteristics and Activity in the MTO Process [Volume 22, Issue 3, 2025, Pages 78-96]
Sadi, M. Modelling and Experimental Study of Wax Deposition in Transportation Line Using a Flow Loop System [Volume 10, Issue 1, 2013, Pages 3-16]
Sadraei, A. Application of Multistage Steam Distillation Column for Extraction of Essential Oil of Valeriana officinialis L. Cultivated in Iran [Volume 10, Issue 4, 2013, Pages 79-84]
Sadrameli, M. SHAHAB-A PC-Based Software for Simulation of Steam Cracking Furnaces (Ethane and Naphtha) [Volume 1, Issue 2, 2004, Pages 55-70]
Sadrameli, S. M. Development of a Molecular Kinetic Model and Tuning of its Required Kinetic Parameters for Thermal Cracking of Light Hydrocarbons [Volume 10, Issue 2, 2013, Pages 33-54]
Sadrameli, S. M. Kinetic Modeling of Sunflower Oil Methanolysis Considering Effects of Interfacial Area of Reaction System [Volume 9, Issue 1, 2012, Pages 50-59]
Sadrameli, S. M. Production of Bio-Gasoline with High Octane Number, as a Renewable Transportation Biofuel, via Thermochemical Conversion of Castor Oil [Volume 17, Issue 3, 2020, Pages 3-23]
Sadrameli, S.M. A Comprehensive Study on a Latent Heat Thermal Energy Storage System and its Feasible Applications in Greenhouses [Volume 13, Issue 2, 2016, Pages 33-45]
Sadri, A.R. Application and Comparison of MAF-66 with AC and CMS in Vacuum Swing Adsorption Process for CO2 Capture from Flue Gas [Volume 20, Issue 4, 2024, Pages 56-72]
Sadri, H. R. Effect of operating conditions on divinylbenzene production in diethyl benzene dehydrogenation reactor [Volume 15, Issue 4, 2018, Pages 93-104]
Sadri, H. R. Reactor modeling and kinetic parameters estimation for diethylbenzene (DEB) dehydrogenation reactions [Volume 16, Issue 3, 2019, Pages 23-36]
Saedi, G. SHAHAB-A PC-Based Software for Simulation of Steam Cracking Furnaces (Ethane and Naphtha) [Volume 1, Issue 2, 2004, Pages 55-70]
Saeedi, M. Induced tissue cell death by magnetic nanoparticle hyperthermia for cancer treatment: an in silico study [Volume 14, Issue 4, 2017, Pages 59-79]
Safajou Jahankhanemlou, M. The Influences of the Nanoparticles Related Parameters on the Tensile Strength of Polymer Nanocomposites [Volume 17, Issue 1, 2020, Pages 65-78]
Safdari, J. Mean Drop Size and Drop Size Distribution in a Hanson Mixer-Settler Extraction Column [Volume 9, Issue 2, 2012, Pages 55-64]
Safdari, Jaber Prediction of Mean Drop Size in Pulsed Packed Extraction Columns [Volume 8, Issue 4, 2011, Pages 3-10]
Safekordi, A. A. Effect of Process Variables on Growth Kinetics of Lactose Particles in a Wet Spray Fluidized Bed Granulator [Volume 11, Issue 4, 2014, Pages 64-75]
Saffar, F. Predicting the coefficients of the Daubert and Danner correlation using a neural network model [Volume 15, Issue 2, 2018, Pages 78-90]
Safi, M. A. Preparation of MWNT/TiO2 Nanofluids and Study of its Thermal Conductivity and Stability [Volume 11, Issue 4, 2014, Pages 3-9]
Saghatoleslami, N. Experimental investigation of power consumption, mass transfer coefficient and flow regime in gas-liquid dispersion systems [Volume 3, Issue 2, 2006, Pages 3-12]
Sahebdelfar, S. Effect of Addition of Different Promoters on the Performance of Pt-Sn-K/Al2O3 Catalyst in the Propane Dehydrogenation [Volume 8, Issue 3, 2011, Pages 48-54]
Sahebdelfar, S. Dehydrogenation of Propane to Propylene Over Pt-Sn/Al2O3 Catalysts: The influence of operating conditions on product selectivity [Volume 7, Issue 2, 2010, Pages 51-57]
Sahebdelfar, S. The Effect of the Method of Adding Impregnation Solutions on the Properties and Performance of the Pd-Ag/Al2O3 Catalyst in the Tail-End Acetylene Selective Hydrogenation. [Volume 18, Issue 2, 2021, Pages 19-30]
Saien, J. Aqueous Quinoline Treatment with Iron/ Copper Activated UV/ Persulfate Process in a Falling Film Photo-Reactor [Volume 11, Issue 4, 2014, Pages 50-63]
Saien, J. Adsorption Behavior of Short Alkyl Chain Imidazolium Ionic Liquidsat N-Butyl Acetate + Water Interface: Experiments and Modeling [Volume 12, Issue 2, 2015, Pages 59-74]
Sajjadian, V. A. Capillary continuity in fractured oil reservoirs [Volume 3, Issue 1, 2006, Pages 29-39]
Salahi, A. Chemical Cleaning of Utafiltration Membrane after Treatment of Oily Wastewater [Volume 7, Issue 3, 2010, Pages 17-28]
Salam, K. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]
Salamatinia, B. Simple Kinetic Modeling of Selective Reduction of Nitric Oxide in Diesel Exhaust Over Cu-Zn/ZSM-5 Monolithic Catalyst [Volume 7, Issue 3, 2010, Pages 74-80]
Salamatinia, B. Application of response surfase methodology for the optimization of Cu and Zn removals by sorption on pre-treated oil palm fround [Volume 3, Issue 2, 2006, Pages 73-84]
Salari, D. Abatement of Benzyl Alcohol and Methyl Ethyl Ketone (MEK) from Polluted Air Over Nanostructured Mn -Supported Alumina Catalyst [Volume 8, Issue 1, 2011, Pages 31-37]
Salari, D. Coke Inhibition During Naphtha Pyrolysis [Volume 6, Issue 1, 2009, Pages 12-22]
Salari, D. CFD Simulation of Catalytic Combustion of Benzene [Volume 6, Issue 4, 2009, Pages 34-44]
Salari, D. Multi-objective Genetic Optimization of Ethane Thermal Cracking Reactor [Volume 5, Issue 3, 2008, Pages 29-39]
Salari, D. Investigation of coke deposition and coke inhibition by organosul-fur compounds in the pyrolysis of naphtha in the get stirred reactor system [Volume 3, Issue 1, 2006, Pages 40-51]
Salari, D. Catalytic oxidation of toluene over LaBO3 (B= Fe, Mn and Co) and LaCo0.7B′0.3O3 (B′= Fe and Mn) perovskite-type [Volume 14, Issue 1, 2017, Pages 67-73]
Salarieh, M. Experimental study of the shape and motion of flattened drops in a Hele-Shaw Cell [Volume 3, Issue 4, 2006, Pages 3-16]
Salawudeen, T. Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology [Volume 16, Issue 1, 2019, Pages 39-53]
Saleh, Khashayar Investigation of Solid Mixing in a Spherical Triaxe Mixer Using the Discrete Element Method [Volume 22, Issue 2, 2025, Pages 12-34]
Salehi, E. A Simplified Perturbation Model for Prediction of Mean Ionic Activity Coefficient in Aqueous Electrolyte Solution [Volume 10, Issue 3, 2013, Pages 14-26]
Salehi, E. New Perturbation Model for Prediction of Amino Acid and Peptide Activity Coefficients [Volume 9, Issue 2, 2012, Pages 34-42]
Salehi, E. Application of the Adaptive Neuro-Fuzzy Inference System (ANFIS) and Sobol Approaches for Modeling and Sensitivity Analysis of the Biosorption of Triglyceride from the Blood Serum [Volume 19, Issue 1, 2022, Pages 51-65]
Salehi, E. 3D simulation of carbon monoxide purification with CuCl(7.0)/AC by pressure swing adsorption process [Volume 19, Issue 4, 2022, Pages 20-37]
Salehi, E. Intensification of Azeotropic Distillation for Ethanol Dehydration using Data-based Optimization, Steady-state Simulation and Sensitivity Analysis [Volume 20, Issue 2, 2023, Pages 15-32]
Salehi, Ehsan A Density Functional Theory (DFT) Investigation on the Impact of the Linker Length in Zinc Oxide-Based Metal-Organic-Frameworks for Hydrogen Adsorption [Volume 21, Issue 1, 2024, Pages 30-50]
Salehi, R. Anaerobic Bioconversion of Heavy Hydrocarbons Using Native Consortia [Volume 6, Issue 1, 2009, Pages 40-49]
Salehi, S. M. A three-dimensional mathematical model for drug delivery from drug-eluting stents [Volume 12, Issue 4, 2015, Pages 15-27]
Salehi, Z. Application of Multistage Steam Distillation Column for Extraction of Essential Oil of Rosemarinuse officinialis L. [Volume 9, Issue 4, 2012, Pages 54-64]
Salehi Kassaei, M. H. Experimental Investigation of Silica Fume as a Cement Extender for Liner Cementing in Iranian Oil/Gas Wells [Volume 7, Issue 1, 2010, Pages 42-66]
Salehizadeh, H. Some investigations on PHA production using activated sludge as inoculum [Volume 2, Issue 2, 2005, Pages 56-63]
Salem, A. Kinetic Study of Barite Carbothermic Reduction in Presence of Sodium Carbonate as Catalyst [Volume 7, Issue 2, 2010, Pages 58-67]
Salem, SH. Studies on Main Properties of Ternary Blended Cement with Limestone Powder and Microsilica [Volume 4, Issue 1, 2007, Pages 3-13]
Salimi, Farhad Achieving Optimal Conditions of Membrane Bioreactors for Dairy Industry Wastewater Treatment [Volume 21, Issue 3, 2024, Pages 49-65]
Salimi, H. Improved numerical simulation of the low temperature Fischer-Tropsch synthesis in a trickle bed reactor [Volume 15, Issue 1, 2018, Pages 1-17]
Salimi, S. Computational fluid dynamics study and GA modeling approach of the bend angle effect on thermal-hydraulic characteristics in zigzag channels [Volume 16, Issue 3, 2019, Pages 70-83]
Salimnezhad, H. Predicting Solubility of Isotactic Poly (1-Butene) in Different Organic Solvents by Modified UNIQUAC [Volume 5, Issue 4, 2008, Pages 39-48]
Samarghandi, M. R. Degradation of Azo Dye Reactive Black 5 and Acid Orange 7 by Fenton-Like Mechanism [Volume 7, Issue 1, 2010, Pages 87-94]
Sami, Samaneh Integrated Simulation and Improvement of the Multi-bed Methanol Synthesis Process with Syngas Recycling and Energy Recovery in Aspen HYSYS [Volume 22, Issue 3, 2025, Pages 18-33]
Samie, S. Application of Bioaugmentation Technology to Improve the Activated Sludge Treatment Process in Removal of Aromatic Compounds [Volume 4, Issue 1, 2007, Pages 43-53]
Samimi, A. Prediction of the Effect of Polymer Membrane Composition in a Dry Air Humidification Process via Neural Network Modeling [Volume 13, Issue 1, 2016, Pages 73-83]
Samimi, A. Study of Parameters Affecting Size Distribution of Beads Produced from Electro-Spray of High Viscous Liquids [Volume 6, Issue 3, 2009, Pages 88-98]
Samimi, M. Study of Parameters Affecting Size Distribution of Beads Produced from Electro-Spray of High Viscous Liquids [Volume 6, Issue 3, 2009, Pages 88-98]
Sanaeepur, H. Interior Modification of Nano-Porous Fillers to Fabricate High Performance Mixed Matrix Membranes [Volume 16, Issue 2, 2019, Pages 70-94]
Sanaeepur, H. The Effect of the Methyl Functional Group on the Physicochemical and Structural Properties of a Synthesized Semi-Aromatic Polyimides [Volume 19, Issue 2, 2022, Pages 89-99]
Sanaeepur, H.R 3D simulation of carbon monoxide purification with CuCl(7.0)/AC by pressure swing adsorption process [Volume 19, Issue 4, 2022, Pages 20-37]
Sarbanha, Ali Akbar Mixing of the Immiscible Liquids in the Entrance Region of a T-Type Chamber Using Laser Induced Fluorescence (LIF) Method [Volume 13, Issue 3, 2016, Pages 32-42]
Sarlak, Sh. Intensification of the Mass Transfer of the Green CO2 Capture Employing the Ternary Solution of Alkanolamine-Amino Acid [Volume 20, Issue 4, 2024, Pages 27-39]
Sarrafzadeh, M. H. Enhanced Degumming of Soyabean Oil and its Influences on Degummed Oil and Lecithin [Volume 5, Issue 1, 2008, Pages 65-73]
Sayan, P. Effect of Amino Acids on Magnesium Ammonium Phosphate Hexahydrate (Struvite) Crystallization [Volume 11, Issue 1, 2014, Pages 3-18]
Saydi, D. Analysis of the Effective Parameters on Potato Powder Quality Produced by a Spray Dryer [Volume 9, Issue 3, 2012, Pages 55-62]
Sayyad Amin, Javad Mathematical Modeling of Mass Transfer during Solid-Liquid Extraction in Fixed, Expanded and Fluidized-Bed Columns [Volume 21, Issue 2, 2024, Pages 56-73]
Schaffie, M. Development of an Improved Sub-Molten Salt Method for Production of Potassium Titanate from Ilmenite under Industrial Conditions [Volume 10, Issue 3, 2013, Pages 60-75]
Sedighi, Mohammad Saleh Experimental Measurement and Thermodynamic Modeling of CO2 Absorption in a Wide Range of Aqueous MDEA Solutions (10-98 wt%) [Volume 21, Issue 3, 2024, Pages 14-33]
Seif, Maryam Mathematical Modeling of Mass Transfer during Solid-Liquid Extraction in Fixed, Expanded and Fluidized-Bed Columns [Volume 21, Issue 2, 2024, Pages 56-73]
Seifi, H. Development of a Molecular Kinetic Model and Tuning of its Required Kinetic Parameters for Thermal Cracking of Light Hydrocarbons [Volume 10, Issue 2, 2013, Pages 33-54]
Seyedeyn-Azad, F. Chemical Induced Wettability Alteration of Carbonate Reservoir Rocks [Volume 6, Issue 1, 2009, Pages 66-73]
Seyedmohaghegh, S. M. Prediction of polyvinyl alcohol (PVOH) properties synthesized at various conditions by artificial neural networks technique [Volume 14, Issue 2, 2017, Pages 3-16]
Seyyedebrahimi, S.A An Investigation of the Effects of Dopamine on the Superhydrophobicity of Carbonyl Iron Particles with Stearic Acid [Volume 17, Issue 4, 2020, Pages 49-59]
Shadizadeh, S. R. Investigation of Hydrogen Sulfide Oil Pollution Source: Asmari Oil Reservoir of Marun Oil Field in the Southwest of Iran [Volume 9, Issue 3, 2012, Pages 63-74]
Shadizadeh, S. R. Drilling Stuck Pipe Prediction in Iranian Oil Fields: An Artificial Neural Network Approach [Volume 7, Issue 4, 2010, Pages 29-41]
Shadizadeh, S. R. Experimental Investigation of Silica Fume as a Cement Extender for Liner Cementing in Iranian Oil/Gas Wells [Volume 7, Issue 1, 2010, Pages 42-66]
Shadizadeh, S. R. A Successful Experience in Optimization of a Production Well in a Southern Iranian Oil Field [Volume 6, Issue 2, 2009, Pages 37-49]
Shafiee, M. Preparation of Ultra High Molecular Weight Polyethylene Using Ziegler-Natta Catalyst System: Optimization of Parameters by Response Surface Methodology [Volume 11, Issue 1, 2014, Pages 55-62]
Shafiee, M. Removal of Pb (II) From Wastewater Using Henna; Optimization of Operational Conditions [Volume 15, Issue 4, 2018, Pages 17-26]
Shafieeardestani, M. Preparation and Drug-Delivery Properties of Metal-Organic Framework HKUST-1 [Volume 16, Issue 4, 2019, Pages 73-80]
Shafiee Langari, F. Experimental Study and Mathematical Modeling of the Osmotic Drying Process [Volume 12, Issue 3, 2015, Pages 15-32]
Shafiei, F. Nelder-Mead algorithm optimization and Galerkin’s method thermal performance analysis of circular porous fins with various profiles in fully wet conditions [Volume 16, Issue 3, 2019, Pages 37-57]
Shafiei, R. Lactic Acid Fermentation by Different LactobacillusSpecies Using SorghumSeed Extract as Carbon Source [Volume 10, Issue 2, 2013, Pages 3-14]
Shafiei, S Optimization of Hydrogen Distribution Network by Imperialist Competitive AlgorithmIn [Volume 13, Issue 3, 2016, Pages 63-77]
Shafiei, S. Experimental Investigation on the Effect of Parameters Influencing the Performance of a Horizontal Styrene-Water Separator [Volume 9, Issue 3, 2012, Pages 48-54]
Shafiei, S. Batch Separation of Styrene/Ethyl Benzene/Water Dispersions [Volume 7, Issue 4, 2010, Pages 22-28]
Shafiei, S. An NLP Approach for Evolution of Heat Exchanger Networks Designed by Pinch Technology [Volume 5, Issue 1, 2008, Pages 13-21]
Shafiei, S. An Efficient Coupled Genetic Algorithm-NLP Method for Heat Exchanger Network Synthesis [Volume 5, Issue 1, 2008, Pages 22-33]
Shafiei, S. Thermodynamic and Heat Transfer Evaluation of Pocket Drying Section in the Multi-Cylinder Dryers of Paper Machine [Volume 13, Issue 2, 2016, Pages 57-70]
Shafiei, Sirous Isothermal Reactor Network Synthesis Using Coupled NonDominated Sorting Genetic Algorithm-II (NSGAII) with Quasi Linear Programming (LP) Method [Volume 12, Issue 3, 2015, Pages 77-95]
Shahamiri, S. A. Catalytic Combustion of Biogas-Hydrogen Mixtures in a Packed Bed Reactor [Volume 7, Issue 2, 2010, Pages 3-16]
Shahgholian, N. Pilot Plant Scale Interesterification of Special Fat Blends to Prepare Zero-Trans Margarine: Monitoring the Fatty Acids content and Physicochemical Properties [Volume 19, Issue 4, 2022, Pages 76-94]
Shahhosseini, Sh. Nonequilibrium Dynamic Modeling of Hydrogen Sulfide Absorption Using Diglycolamine Solution [Volume 10, Issue 1, 2013, Pages 45-54]
Shahhosseini, Sh. Investigation of Temperature and Flow Fields in an Alternative Design of Industrial Cracking Furnaces Using CFD [Volume 7, Issue 3, 2010, Pages 61-73]
Shahhosseini, Sh. Continuous Lumping Model of an Industrial Refinery Isomax Reactor [Volume 7, Issue 2, 2010, Pages 39-50]
Shahhosseini, Sh. Dynamic Simulation of an Industrial Rotary Dryer [Volume 7, Issue 2, 2010, Pages 68-77]
Shahhosseini, Sh. Improved numerical simulation of the low temperature Fischer-Tropsch synthesis in a trickle bed reactor [Volume 15, Issue 1, 2018, Pages 1-17]
Shahnazari, M. R. Instability Analysis of Miscible Displacements in Homogeneous Porous Media [Volume 9, Issue 4, 2012, Pages 25-32]
Shahrabadi, A. Sequential formulation for compositional reservoirs simulation using peng robinson equation of state [Volume 3, Issue 1, 2006, Pages 52-64]
Shahrabadi, Abbas Modelling and Experimental Study of Wax Deposition in Transportation Line Using a Flow Loop System [Volume 10, Issue 1, 2013, Pages 3-16]
Shahraki, F. A Survey for the Selection of Control Structure for Distillation Columns Based on Steady State Controllability Indexes [Volume 6, Issue 2, 2009, Pages 29-36]
Shahraki, F. Effects of Vertical Temperature Gradient on Heavy Gas Dispersion in Build up Area [Volume 6, Issue 3, 2009, Pages 26-45]
Shahraki, F. Robust control of a high-purity disttilation column using synthesis [Volume 3, Issue 2, 2006, Pages 20-32]
Shahrokhi, M. Dynamic Evolution of Droplet/Particle Size Distribution in Suspension Polymerization of Styrene [Volume 7, Issue 3, 2010, Pages 49-60]
Shahsavarzadeh-Jangi, P. Assessment of Bioavailability of Crude Oil in Three Different Agricultural Soils [Volume 12, Issue 1, 2015, Pages 3-12]
Shahzamani, Mahnaz Relationship between the Microstructure and Gas Transport Properties of Polyurethane/Polycaprolactone Blends [Volume 13, Issue 3, 2016, Pages 78-88]
Shakeri, M. Effect of Polymer Concentr ation on the Structure and Performance of Polysulf one Flat Membrane for CO 2 Absorption in Membrane Contactor [Volume 11, Issue 2, 2014, Pages 78-91]
Shakiba, S. A. Study of Carbon Black Production with Optimized Feed to Predict Product Particle Size [Volume 4, Issue 1, 2007, Pages 36-42]
Shams, M. Synthesis and Characterization of Nanowires Zinc Oxide with Different Temperatures [Volume 10, Issue 2, 2013, Pages 81-86]
Sharafi, P. 3D simulation of carbon monoxide purification with CuCl(7.0)/AC by pressure swing adsorption process [Volume 19, Issue 4, 2022, Pages 20-37]
Shareei, Mohammad Degradation of Acetic Acid to decrease COD by Photocatalytic Process in Wastewater: TiO2 catalyst with UV Process [Volume 21, Issue 4, 2024, Pages 37-47]
Shariatinia, Z. Fabrication of Chitosan-Polyethylene Oxide Electrospun Nanofibrous Mats Containing Green Tea Extract [Volume 15, Issue 2, 2018, Pages 65-77]
Shariatmadar, F. S. An Empirical Correlation to Predict the Ignition Delay Time for Some Hydrocarbon Fuels [Volume 13, Issue 1, 2016, Pages 84-97]
Shariaty-Niassar, M. Preparation of MWNT/TiO2 Nanofluids and Study of its Thermal Conductivity and Stability [Volume 11, Issue 4, 2014, Pages 3-9]
Shariaty-Niassar, M. Effect of Single Walled Carbon Nanotubes on Natural Gas Hydrate Formation [Volume 11, Issue 3, 2014, Pages 67-73]
Shariaty-Niassar, M. Electro-Coalescence of an Aqueous Droplet at an Oil–Water Interface with an Investigation of Secondary Droplets Formation [Volume 10, Issue 1, 2013, Pages 30-44]
Shariaty-Niassar, M. An Investigation of Indirect Evaporative Coolers, IEC With Respect to Thermal Comfort Criteria [Volume 6, Issue 2, 2009, Pages 14-28]
Shariaty-Niassar, M. Calculation of Physical Properties of the Methanol-Water Mixture Using Molecular Dynamics Simulation [Volume 6, Issue 4, 2009, Pages 62-72]
Shariaty-Niassar, M. An Investigation of the Effects of Dopamine on the Superhydrophobicity of Carbonyl Iron Particles with Stearic Acid [Volume 17, Issue 4, 2020, Pages 49-59]
Sharifi, Kh. Product Yields Prediction of Tehran Refinery Hydrocracking Unit Using Artificial Neural Networks [Volume 7, Issue 4, 2010, Pages 50-63]
Sharifnia, Sh. Degradation of Diclofenac Sodium under Solar Light Irradiation by Photocatalytic Performance of ZnO and V2O5 [Volume 15, Issue 4, 2018, Pages 1-16]
Sharifzadeh, E. The Influences of the Nanoparticles Related Parameters on the Tensile Strength of Polymer Nanocomposites [Volume 17, Issue 1, 2020, Pages 65-78]
Sharifzadeh, E. Synthesis and Characterization of Waterglass-Based Silica Aerogel Under Heat Treatment for Adsorption of Nitrate from Water: Batch and Column Studies [Volume 16, Issue 4, 2019, Pages 53-72]
Sharifzadeh, E. Investigating the Effects of Hollow Graphene Oxide Nanoparticles on the Thermal/Mechanical Properties of Polymer Nanocomposites: Experimental, Analytical and Simulation Approaches [Volume 18, Issue 2, 2021, Pages 71-83]
Sharifzadeh, Esmail Combination of Machine Learning and Artificial Neural Networks to Predict the Tensile Modulus of Thermoplastic Nanocomposites: The Role of Polymer/Particle Interphase [Volume 22, Issue 4, 2025, Pages 56-82]
Shavandi, M. Optimization of factors affecting on sulfide oxidation from synthetic spent caustic by Haloalkaliphilic Thioalkalivibrio versutus by focus on sodium ion effect: Application of response surface methodology [Volume 14, Issue 1, 2017, Pages 74-87]
Shayegan, J. Study of Enhanced Bioremediation in Treatment of Gas Condensates Contaminated Soil [Volume 9, Issue 4, 2012, Pages 16-24]
Shayegan, J. Anaerobic Bioconversion of Heavy Hydrocarbons Using Native Consortia [Volume 6, Issue 1, 2009, Pages 40-49]
Shayegan, J. Performance of Membrane Bioreactor in Removal of Heavy Metals from Industrial Wastewater [Volume 5, Issue 4, 2008, Pages 33-38]
Shayegan, J. Photocatalytic Degradation of PAHs Contaminated Soil in South Pars Economic and Energy Zone with TiO2 Nanocatalyst [Volume 4, Issue 1, 2007, Pages 14-20]
Shayegan, J. Dynamic Modeling of Granular Sludge in UASB Reactors [Volume 2, Issue 1, 2005, Pages 52-60]
Shayegan, J. Decolorization of Distillery Wastewater by UV irradiated spores of Aspergillus fumigatus [Volume 2, Issue 2, 2005, Pages 49-55]
Shayegan, J. Treatment of Tehran Refinery Effluents in UASB Reactors [Volume 1, Issue 2, 2004, Pages 3-10]
Shayegan, J. Study of the Industrial Wastewater Treatment by a Membrane Bioreactor (MBR) Case Study: Cookie Factory Wastewater [Volume 17, Issue 3, 2020, Pages 74-84]
Shayesteh, k. Optimization and Comparison of Ni and Cd Removal Using Zinc Powder with the Response Surface Methodology [Volume 17, Issue 4, 2020, Pages 3-20]
Shayesteh, K. Effect of Particle Size of Zinc Powder on the Efficiency of Ni-Cd Cementation in Cold Purification Reactor [Volume 20, Issue 3, 2023, Pages 90-103]
Sheibani, G. Screening Effective Factors in Slurry Phase Bioremediation of 2,4,6-Trinitrotoluene (TNT) Contaminated Soil [Volume 8, Issue 2, 2011, Pages 29-40]
Sheikhabbasi, M. Long Range Corrections to the Vapor-Liquid Equilibrium and Surface Tension of Methane with NVT Molecular Dynamics Simulations [Volume 9, Issue 4, 2012, Pages 33-48]
Shekarbeigi, Mina Diazonium-Based Surface Functionalization of PES Nanofiltration Membranes for Improved Antifouling Properties and Heavy Metal Removal [(Articles in Press)]
Shenavar, Abolfazl Preparation of Flame Retardant Polystyrene via In-Situ Bulk Polymerization Method and Evaluation of its Flammability Properties [Volume 13, Issue 4, 2016, Pages 62-70]
Shirazian, S. Dehydration of Natural Gas Using Synthesized Chabazite Zeolite Membranes [Volume 12, Issue 1, 2015, Pages 13-21]
Shirkhanloo, H. Solid Phase Equation of State Application for Wax Formation Prediction in Petroleum Mixtures [Volume 5, Issue 2, 2008, Pages 23-33]
Shirvani, M. Effect of Different Nucleation and Growth Kinetic Terms on Modeling Results of KNO3 CMSMPR Crystallizer [Volume 10, Issue 1, 2013, Pages 79-91]
Shirvani, M. Product Yields Prediction of Tehran Refinery Hydrocracking Unit Using Artificial Neural Networks [Volume 7, Issue 4, 2010, Pages 50-63]
Shirvani, S. Hydroconversion of Furfural over Cu-Cr/SiO2 Nanocatalysts: A Comparative Study [Volume 15, Issue 2, 2018, Pages 38-51]
Shishesaz, M. R. Comparison of Biosorption of Cadmium (II) from Aqueous Solution, by Bacillus Sp and Pseudomonas Aeruginosa [Volume 10, Issue 2, 2013, Pages 14-21]
Shojaei, V. Development of an Improved Sub-Molten Salt Method for Production of Potassium Titanate from Ilmenite under Industrial Conditions [Volume 10, Issue 3, 2013, Pages 60-75]
Shojaei, Z. Removal of Cerium from Aqueous Solutions by Amino Phosphate Modified Nano TiO2: Kinetic, and Equilibrium Studies [Volume 13, Issue 2, 2016, Pages 3-21]
Shojai Kaveh, N. A hybrid neural–genetic algorithm for predicting pure and impure CO2 minimum miscibility pressure [Volume 3, Issue 4, 2006, Pages 44-59]
Shojaosadati, S. A Optimization of factors affecting on sulfide oxidation from synthetic spent caustic by Haloalkaliphilic Thioalkalivibrio versutus by focus on sodium ion effect: Application of response surface methodology [Volume 14, Issue 1, 2017, Pages 74-87]
Shojaosadati, S. A. Assessment of Bioavailability of Crude Oil in Three Different Agricultural Soils [Volume 12, Issue 1, 2015, Pages 3-12]
Shojosadati, S.A. Determination of Adsorption Isotherm for L-Lysine Imprinted Polymer [Volume 5, Issue 4, 2008, Pages 49-55]
Shokouhi, M. Experimental Investigation on the Solubility and Initial Rate of Absorption of CO2 in Mixture of Amine-Functionalized Ionic Liquids and Physical Solvents [Volume 12, Issue 1, 2015, Pages 68-77]
Shokouhi, M. Thermo Physical Properties of Some Physical and Chemical Solvents at Atmospheric Pressure [Volume 10, Issue 4, 2013, Pages 43-54]
Shokrkar, Hanieh Technical-Economic Analysis of Chemical Hydrolysis of Microalgae for Bioethanol Production using SuperPro Designer® [Volume 21, Issue 3, 2024, Pages 34-48]
Shokrollahzadeh, S. Comparison the performance of different reverse osmosis membrane modules by CFD modeling [Volume 16, Issue 1, 2019, Pages 101-116]
Shourehkandi, Mehrdad Investigating the Effective Parameters on purity Purification of Recycled Graphite from Spent Lithium-Ion Batteries [(Articles in Press)]
Simiari, M. Synthesis, Characterization and Analysis of Thermal Properties and burning rate of Zr/BaCrO4 mixture [Volume 20, Issue 2, 2023, Pages 3-14]
Sinkakarimi, A. CFD Study of Concave Turbine [Volume 16, Issue 2, 2019, Pages 103-118]
Sirousazar, M. Fractional Calculus Method Applied To the Apple Rings Candying in Osmotic Drying Process [Volume 17, Issue 1, 2020, Pages 90-102]
Smith, R. Optimization of Integrated Low-Temperature Gas Separation Processes Using SA Method and Different Refrigerants [Volume 6, Issue 4, 2009, Pages 27-33]
Sobhanian, Fahimeh Mixing of the Immiscible Liquids in the Entrance Region of a T-Type Chamber Using Laser Induced Fluorescence (LIF) Method [Volume 13, Issue 3, 2016, Pages 32-42]
Sodeifian, Gh. Application of a Kinetic Model for Studying Impurities Effect on Crystallization of NaCl, KBr, ADP and Sucrose Solutions [Volume 9, Issue 2, 2012, Pages 3-12]
Sohrabi, M. Application of experimental design to emulsion liquid membrane pertraction of gold ons from aqueous solutions [Volume 3, Issue 1, 2006, Pages 77-91]
Sohrabi, M. Determination of the Kinetic Parameters and Dynamic Modeling of the Reactor for the Direct Conversion of Synthesis gas to Di-methyl ether [Volume 3, Issue 4, 2006, Pages 23-34]
Sohrabi, Morteza A Model For The Residence Time Distribution and Holdup Measurement in a Two Impinging Streams Cyclone Reactor/Contactor in Solid-Liquid Systems [Volume 3, Issue 3, 2006, Pages 17-28]
Solaimany Nazar, A . R. Molecular Simulation of Asphaltene Aggregation in Crude Oil by Monte Carlo Method [Volume 8, Issue 3, 2011, Pages 3-15]
Solaimany Nazar, A. R. Investigation of Asphaltene Stability in the Iranian Crude Oils [Volume 5, Issue 1, 2008, Pages 3-12]
Soleimani, M. Recovery of Gold from Gold Plating Industry Wastewater Using an Agricultural Waste: Hard Shell of Apricot Stones [Volume 4, Issue 1, 2007, Pages 21-35]
Soleimani, M. Application of experimental design to emulsion liquid membrane pertraction of gold ons from aqueous solutions [Volume 3, Issue 1, 2006, Pages 77-91]
Soleymani, F. Biosorption of cobalt (II) by Inta ct and Chemically Modified Brown Algae: Optimization Using Resp onse Surface Methodology and Equilibrium, Dynamics and Thermodynamics Studies [Volume 11, Issue 2, 2014, Pages 56-77]
Soltani, H Optimization of Hydrogen Distribution Network by Imperialist Competitive AlgorithmIn [Volume 13, Issue 3, 2016, Pages 63-77]
Soltani, Hadi Isothermal Reactor Network Synthesis Using Coupled NonDominated Sorting Genetic Algorithm-II (NSGAII) with Quasi Linear Programming (LP) Method [Volume 12, Issue 3, 2015, Pages 77-95]
Soltani, S. Prediction of polyvinyl alcohol (PVOH) properties synthesized at various conditions by artificial neural networks technique [Volume 14, Issue 2, 2017, Pages 3-16]
Soltanieh, M. Monolithic Three-way Palladium Catalytic Converters for Automobile Exhaust Emission Control [Volume 2, Issue 1, 2005, Pages 61-70]
Soltani-Tehrani, F. Metal-Organic Frameworks in Systems of Drug Delivery: Review [Volume 20, Issue 1, 2023, Pages 36-50]
Soodmand, M. H. Modeling and Simulation of a Divided Wall Column for 1,3 Butadiene Purification [Volume 12, Issue 1, 2015, Pages 60-67]
Soroushnia, Arezou Transdermal Delivery of Desmopressin Acetate from Water-in- Oil Nano/submicron Emulsion Systems [Volume 13, Issue 4, 2016, Pages 1-13]
Sotude.Gharebagh, R. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
Sotudeh Gharebagh, Rahmat A Comparative Study of Machine Learning Methods for Pyrolysis Yield Prediction [Volume 21, Issue 4, 2024, Pages 62-77]
Sotudeh-Gharebagh, R. Modeling of Vibration of a Fluidized Bed Cylindrical Shell [Volume 10, Issue 2, 2013, Pages 67-80]
Sotudeh-Gharebagh, R. Unsteady-State Modeling of the Fluidized Bed Polyethylene Reactor [Volume 6, Issue 1, 2009, Pages 23-39]
Soudbar, D. Production of 1-Butene via Selective Ethylene Dimerization by Addition of Bromoethane as a New Promoter to Titanium-Based Catalyst in the Presence of Tetrahydropyran Modifier and Triethylaluminum Co-Catalyst [Volume 9, Issue 3, 2012, Pages 3-13]
Souri, Tayebeh Preparation of SAPO-34 Molecular Sieve Dual Template Using TEA and Morpholine: Influence of Crystallization Times on Catalyst Characteristics and Activity in the MTO Process [Volume 22, Issue 3, 2025, Pages 78-96]
S P, Manjunath Development and Evaluation of the Magnesium Potassium Phosphate Cement Based Refractory [Volume 17, Issue 4, 2020, Pages 69-78]
Srivastava, Sh. Kinetic, mechanistic and thermodynamic investigations on Iridium (III) catalyzed oxidation of D-Mannitol by N-chloro-p-toluenesulfonamide in perchloric acid medium [Volume 14, Issue 4, 2017, Pages 77-89]
T
Tabar Heidar, K. Biofiltration of BTEX in a Mixture Bed of Bagasse and Activated Carbon Using Aspergillus Fungi [Volume 10, Issue 2, 2013, Pages 22-32]
Tabar Heidar, K. Effect of electrokinetic on biodegradation of fluorene and phenanthrene in soil [Volume 13, Issue 2, 2016, Pages 71-79]
Tabatabaei, S. H. Simulation and Experimental Investigation of the Permeability Reduction due to Asphaltene Deposition in Porous Media [Volume 7, Issue 3, 2010, Pages 3-16]
Tabatabaei-Nejad, S. A. Effect of Hydrocarbon Fluid Characterization on Wax Precipitation Modeling [Volume 6, Issue 1, 2009, Pages 50-65]
Tabibiazar, M. A Review on the Hazardous Materials Removal Using Activated Carbons Derived from Walnut (Juglans regia L.) Shell [Volume 17, Issue 1, 2020, Pages 3-36]
Taeb, A. Effect of drying rate on the performance of Pt-Sn-K/γ-Al2O3 catalyst for propane dehydrogenation [Volume 18, Issue 1, 2021, Pages 16-24]
Taghikhani, V. Comparison of the Performance of Different Thermodynamic Models for Liquid Phase in Predicting the Phase Behavior of Hydrogen Hydrates with THF [Volume 10, Issue 4, 2013, Pages 65-78]
Taghikhani, V. Comparison between to versions of the SAFT EOS in the study of PVT and VLE phase behavior of pure polymer melts and binary polymer solutions [Volume 3, Issue 2, 2006, Pages 33-51]
Taghikhani, Vahid On the Selection of Proper Thermodynamic Conditions for the Gas Antisolvent Process (GAS) at Nearcritical and Supercritical Conditions [Volume 3, Issue 4, 2006, Pages 17-22]
Taghizadeh, Seyed Mojtaba Transdermal Delivery of Desmopressin Acetate from Water-in- Oil Nano/submicron Emulsion Systems [Volume 13, Issue 4, 2016, Pages 1-13]
Taghizadeh, S. R. Reverse osmosis desalination using thin film composite polysulfone-zinc oxide mixed matrix membrane [Volume 20, Issue 1, 2023, Pages 67-77]
Taheri, Masoud Effect of Magnet Position on Flow and Thermal Performance of Ferrofluids in a Channel with Constant Wall Heat Flux: A CFD Study [Volume 22, Issue 4, 2025, Pages 29-42]
Taheri, P. Preparation and Drug-Delivery Properties of Metal-Organic Framework HKUST-1 [Volume 16, Issue 4, 2019, Pages 73-80]
Taheri Tari, Sajjad Pyrolysis of Polyethylene Terephthalate via Infrared Heating: Comparing the Effect of the Heating Rate Factor on The Quality and Quantity of the Final Char Product [Volume 22, Issue 3, 2025, Pages 68-77]
Tahmasbi, S. Application of the Adaptive Neuro-Fuzzy Inference System (ANFIS) and Sobol Approaches for Modeling and Sensitivity Analysis of the Biosorption of Triglyceride from the Blood Serum [Volume 19, Issue 1, 2022, Pages 51-65]
Tahmasbi, V. Application of the Adaptive Neuro-Fuzzy Inference System (ANFIS) and Sobol Approaches for Modeling and Sensitivity Analysis of the Biosorption of Triglyceride from the Blood Serum [Volume 19, Issue 1, 2022, Pages 51-65]
Tahouni, N. Optimization of Integrated Low-Temperature Gas Separation Processes Using SA Method and Different Refrigerants [Volume 6, Issue 4, 2009, Pages 27-33]
Tahriri zangeneh, F. Effect of drying rate on the performance of Pt-Sn-K/γ-Al2O3 catalyst for propane dehydrogenation [Volume 18, Issue 1, 2021, Pages 16-24]
Tahriri Zangeneh, F. Effect of Addition of Different Promoters on the Performance of Pt-Sn-K/Al2O3 Catalyst in the Propane Dehydrogenation [Volume 8, Issue 3, 2011, Pages 48-54]
Tahriri Zangeneh, F. Dehydrogenation of Propane to Propylene Over Pt-Sn/Al2O3 Catalysts: The influence of operating conditions on product selectivity [Volume 7, Issue 2, 2010, Pages 51-57]
Tahvildari, Kambiz Studying the Catalytic Performance, Characterization and Kinetic of SrO-CaO-Al2O3 Nanocatalysts for Producing Biodiesel [Volume 22, Issue 1, 2025, Pages 3-27]
Takapoui, M. Developing Collagen Hydrogel Including Bioactive Glass Nanoparticles for being used in Bone Tissue Engineering [Volume 20, Issue 4, 2024, Pages 3-12]
Takht Ravanchi, M. An Egg-Shell Pd-Ag/ α -Al 2 O 3 Catalyst for Tail-End Acetylene Selective Hydrogenation [Volume 11, Issue 1, 2014, Pages 42-54]
Takht Ravanchi, M. Selective Transport of Propylene by Silver Ion Complex Through an Immobilized Liquid Membrane [Volume 7, Issue 1, 2010, Pages 28-41]
Takht Ravanchi, M. The Effect of the Method of Adding Impregnation Solutions on the Properties and Performance of the Pd-Ag/Al2O3 Catalyst in the Tail-End Acetylene Selective Hydrogenation. [Volume 18, Issue 2, 2021, Pages 19-30]
Talaghat, M. r. Nelder-Mead algorithm optimization and Galerkin’s method thermal performance analysis of circular porous fins with various profiles in fully wet conditions [Volume 16, Issue 3, 2019, Pages 37-57]
Talaghat, M.R. Optimization of Semiregenerative Catalytic Naphtha Reforming Unit to Enhance Octane Number and Reformate Yield [Volume 15, Issue 2, 2018, Pages 52-64]
Talaie, M. R. Development of an explicit eulerian method for treating particle laden turbulent flow in dust collectors [Volume 3, Issue 1, 2006, Pages 13-28]
Talaie, M.R. The effect of wall strengtheners on the performance of double-stage electrostatic precipitators [Volume 2, Issue 2, 2005, Pages 37-48]
Talaii, E. CuO/ Water Nanofluid Heat Transfer Through Triangular Ducts [Volume 9, Issue 1, 2012, Pages 23-32]
Talebi, S.M Levels of PM10 and its Chemical Composition in the Atmosphere of the City of Isfahan [Volume 5, Issue 3, 2008, Pages 62-67]
Talebizadeh, A.R. Methane oxy-steam reforming over a highly efficient Ni/Al2O3 nanocatalyst prepared by microwave-assisted impregnation method [Volume 14, Issue 4, 2017, Pages 3-16]
Tanha, Hadis Predicting the Cetane Number of Biodiesel using two AI-Models: the Gradient-based ANN and ANN Optimized by Genetic Algorithm [Volume 21, Issue 2, 2024, Pages 15-28]
Tarjomannejad, A. Catalytic oxidation of toluene over LaBO3 (B= Fe, Mn and Co) and LaCo0.7B′0.3O3 (B′= Fe and Mn) perovskite-type [Volume 14, Issue 1, 2017, Pages 67-73]
Tarjomannejad, A. Experimental and Kinetic Study of CO Oxidation Over LaFe1-xCuxO3 (x=0, 0.2, 0.4, 0.6) Perovskite-Type Oxides [Volume 15, Issue 2, 2018, Pages 91-102]
Tavakkoli Osgouei, Y. Kinetic Study of Barite Carbothermic Reduction in Presence of Sodium Carbonate as Catalyst [Volume 7, Issue 2, 2010, Pages 58-67]
Tavakoli, Hassan Investigation of Sarin Gas Dispersion in an Indoor Environment: A CFD-ANN Study [Volume 21, Issue 4, 2024, Pages 48-61]
Tavakoli-Ghinani, T. Levels of PM10 and its Chemical Composition in the Atmosphere of the City of Isfahan [Volume 5, Issue 3, 2008, Pages 62-67]
Tavalatifi, Fatemeh Integrated Simulation and Improvement of the Multi-bed Methanol Synthesis Process with Syngas Recycling and Energy Recovery in Aspen HYSYS [Volume 22, Issue 3, 2025, Pages 18-33]
Tavangar, S. Reduction of Parasitic Currents in Simulation of Droplet Secondary Breakup with Density Ratio Higher than 60 by InterDyMFoam [Volume 11, Issue 2, 2014, Pages 29-42]
Taylor, S. H. Characterization of Copper-Manganese Oxide Catalysts and Their Precursors: Effect of Precipitate Aging upon the Structure and Morphology of Precursors and Catalysts [Volume 1, Issue 2, 2004, Pages 11-18]
Tehrani, Sh. The Effects of SiO2 and Al2O3 Binders on the Activity and Selectivity of Bifunctional Fe/HZSM-5 Catalyst in Fischer-Tropsch Synthesis [Volume 5, Issue 2, 2008, Pages 64-70]
Telmadarreie, A. Investigation of Hydrogen Sulfide Oil Pollution Source: Asmari Oil Reservoir of Marun Oil Field in the Southwest of Iran [Volume 9, Issue 3, 2012, Pages 63-74]
Thibault, J. Numerical Study of Non-Newtonian Flow Through Rectangular Microchannels [Volume 6, Issue 4, 2009, Pages 44-61]
Titiz-Sargut, S. Effect of Amino Acids on Magnesium Ammonium Phosphate Hexahydrate (Struvite) Crystallization [Volume 11, Issue 1, 2014, Pages 3-18]
Tohfegar, E. The Influences of the Nanoparticles Related Parameters on the Tensile Strength of Polymer Nanocomposites [Volume 17, Issue 1, 2020, Pages 65-78]
Tohfegar, E. Synthesis and Characterization of Waterglass-Based Silica Aerogel Under Heat Treatment for Adsorption of Nitrate from Water: Batch and Column Studies [Volume 16, Issue 4, 2019, Pages 53-72]
Torabi-Hokmabadi, Farzad Prediction of Mean Drop Size in Pulsed Packed Extraction Columns [Volume 8, Issue 4, 2011, Pages 3-10]
Torab-Mostaedi, M. Mean Drop Size and Drop Size Distribution in a Hanson Mixer-Settler Extraction Column [Volume 9, Issue 2, 2012, Pages 55-64]
Torab-Mostaedi, M. Removal of Cerium from Aqueous Solutions by Amino Phosphate Modified Nano TiO2: Kinetic, and Equilibrium Studies [Volume 13, Issue 2, 2016, Pages 3-21]
Torab-Mostaedi, M. Stochastic Comparisons of Probability Distribution Functions with Experimental Data in a Liquid-Liquid Extraction Column for Determination of Drop Size Distributions [Volume 14, Issue 3, 2017, Pages 82-95]
Torab-Mostaedi, Meisam Prediction of Mean Drop Size in Pulsed Packed Extraction Columns [Volume 8, Issue 4, 2011, Pages 3-10]
Towfighi, J. Development of a Molecular Kinetic Model and Tuning of its Required Kinetic Parameters for Thermal Cracking of Light Hydrocarbons [Volume 10, Issue 2, 2013, Pages 33-54]
Towfighi, J. Coke Inhibition During Naphtha Pyrolysis [Volume 6, Issue 1, 2009, Pages 12-22]
Towfighi, J. Characterization and optimization of SAPO-34 catalysts synthesized by mixed templates in MTO reaction [Volume 12, Issue 4, 2015, Pages 4-14]
Towfighi, J. Investigation of coke deposition and coke inhibition by organosul-fur compounds in the pyrolysis of naphtha in the get stirred reactor system [Volume 3, Issue 1, 2006, Pages 40-51]
Towfighi, J. SHAHAB-A PC-Based Software for Simulation of Steam Cracking Furnaces (Ethane and Naphtha) [Volume 1, Issue 2, 2004, Pages 55-70]
Towfighi Daryan, J. The Synthesis of SAPO-34 at Different Crystallization Temperature and its Catalytic Performance for Methanol to Olefins Reaction [Volume 11, Issue 4, 2014, Pages 31-39]
Towfighi Daryan, J. Effect of Crystallization Temperature on the Synthesis of SAPO-34 and its Catalytic Performance in MTO Reaction [Volume 11, Issue 3, 2014, Pages 16-25]
Trägårdh, C. A Study of Flow and Mixing in Bubbly Gas-Liquid Pipe Flow Generated by a Grid [Volume 3, Issue 4, 2006, Pages 60-75]
V
Vafaie Sefti, M. Solid Phase Equation of State Application for Wax Formation Prediction in Petroleum Mixtures [Volume 5, Issue 2, 2008, Pages 23-33]
Vafaie Sefti, M. A hybrid neural–genetic algorithm for predicting pure and impure CO2 minimum miscibility pressure [Volume 3, Issue 4, 2006, Pages 44-59]
Vaferi, B. Developing Adaptive Differential Evolution as a New Evolutionary Algorithm, Application in Optimization of Chemical Processes [Volume 8, Issue 2, 2011, Pages 18-28]
Vaferi, B. Mathematical simulation of thermal behavior of moving bed reactors [Volume 14, Issue 4, 2017, Pages 48-58]
Vahabzadeh, F. Soy Protein Isolate and Gum Arabic Composite Affects Stability of Beverage Emulsion [Volume 6, Issue 2, 2009, Pages 3-13]
Vahabzadeh, F. Study on Trend of Biodegradability of Phenolic Compounds During Photo-Fenton Advanced Oxidation Process [Volume 5, Issue 4, 2008, Pages 23-32]
Vahdani, M. R. Effect of the Carbon Source Flow Rate on the Quality of the Growth of Super-Aligned Carbon Nanotube Arrays by the Chemical Vapor Deposition Method [Volume 20, Issue 3, 2023, Pages 45-53]
Vahidfard, V. Effect of Particle Size of Zinc Powder on the Efficiency of Ni-Cd Cementation in Cold Purification Reactor [Volume 20, Issue 3, 2023, Pages 90-103]
Vahidi, O. Induced tissue cell death by magnetic nanoparticle hyperthermia for cancer treatment: an in silico study [Volume 14, Issue 4, 2017, Pages 59-79]
Vahidi, O. Designing a glycemic control strategy to maintain glucose homeostasis and prevent hypoglycemia for subjects with type 1 diabetes [Volume 15, Issue 3, 2018, Pages 34-52]
Vakili, M. H. CFD Investigation of Hydrodynamics in an Industrial Suspension Polymerization Mixing Reactor [Volume 9, Issue 2, 2012, Pages 43-53]
Valeh-e-Sheyda, P. Intensification of the Mass Transfer of the Green CO2 Capture Employing the Ternary Solution of Alkanolamine-Amino Acid [Volume 20, Issue 4, 2024, Pages 27-39]
Varaminian, F. Prediction of Gas Hydrate Forming Pressures by Using PR Equation of State and Different Mixing Rules [Volume 8, Issue 1, 2011, Pages 46-55]
Varmazyar, M. Dynamic Behavior of an Oil Droplet Adhered to the Wall Surface in a Channel Flow by the Lattice Boltzmann Method [Volume 15, Issue 1, 2018, Pages 35-48]
Varmira, K. Synthesis the Bioactive Conjugates of Nisin-Xanthan through the Maillard Reaction at Moderate Temperature [Volume 20, Issue 1, 2023, Pages 78-91]
Vasheghani-Farahani, E. Determination of Adsorption Isotherm for L-Lysine Imprinted Polymer [Volume 5, Issue 4, 2008, Pages 49-55]
Vaziri, A. Optimization of Synthesis of Expandable Polystyrene by Multi-Stage Initiator Dosing [Volume 13, Issue 1, 2016, Pages 20-31]
Verma, A. Kinetic, mechanistic and thermodynamic investigations on Iridium (III) catalyzed oxidation of D-Mannitol by N-chloro-p-toluenesulfonamide in perchloric acid medium [Volume 14, Issue 4, 2017, Pages 77-89]
Vossoughi, Manoucher Kinetics investigation of cell growth, xanthan production and sugar cane molasses consumption by Xanthomonas campestris [Volume 12, Issue 4, 2015, Pages 84-92]
W
Wang, Y. Study of Flow Behavior of Ultrafine Particles Agglomerations in the Riser [Volume 10, Issue 1, 2013, Pages 55-66]
Wierzba, I. Catalytic Combustion of Biogas-Hydrogen Mixtures in a Packed Bed Reactor [Volume 7, Issue 2, 2010, Pages 3-16]
X
Xu, Ch. Study of Flow Behavior of Ultrafine Particles Agglomerations in the Riser [Volume 10, Issue 1, 2013, Pages 55-66]
Y
Yaghmaei, S. Prediction of Electricity Generation in a Duel Chamber Microbial Fuel Cell [Volume 9, Issue 1, 2012, Pages 3-11]
Yaghmaei, S. Experimental Comparison of Two Modifications of Activated Sludge for Treatment of Furfural-Containing Wastewater [Volume 2, Issue 1, 2005, Pages 3-9]
Yasemi, M. Microfluidic extraction of tannic acid from Quercus leaves [Volume 15, Issue 3, 2018, Pages 15-33]
Yasrebi, N. Study on the Effect of Humidity on Electrical Properties of Copper-Silica Aerogel [Volume 12, Issue 2, 2015, Pages 3-12]
Yavari, N. Modified and unmodified Graphite/unsaturated polyester resin composites: thermal and mechanical behavior [Volume 17, Issue 2, 2020, Pages 14-33]
Yazdian, F. Anticancer and Antioxidant Properties of Ag NPs Coated with BSA NPs [Volume 12, Issue 1, 2015, Pages 22-29]
Yegani, R. CO2 biofixation by Dunaliella Salina in batch and semi-continuous cultivations, using hydrophobic and hydrophilic poly ethylene (PE) hollow fiber membrane photobioreactors [Volume 13, Issue 1, 2016, Pages 47-59]
Yegani, Reza Semi-Continuous Cultivation of Photosynthetic Cells in a Flat Plate Photobioreactor [Volume 2, Issue 2, 2005, Pages 15-21]
Yoshimura, Satoshi Semi-Continuous Cultivation of Photosynthetic Cells in a Flat Plate Photobioreactor [Volume 2, Issue 2, 2005, Pages 15-21]
Younesi, H. Synthesis of a high characteristics activated carbon from walnut shell for the removal of Cr (VI) and Fe (II) from aqueous solution: single and binary solutes adsorption [Volume 12, Issue 4, 2015, Pages 28-51]
Yousefi, A. Evaluation of Effective Strategies for Cultivation of Acidithiobacillus Thiooxidans as Cement-Degrading Bacteria [Volume 10, Issue 2, 2013, Pages 55-66]
Yousefi, A. Prediction of the pharmaceutical solubility in water and organic solvents via different soft computing models [Volume 16, Issue 1, 2019, Pages 83-100]
Yousefi, A. A. Investigating the Performance of the Graphene-WO3-TiO2 Ternary Composite in Dye-Sensitized Solar Cells [Volume 20, Issue 4, 2024, Pages 13-26]
Yousefi Amiri, T. Performance Evaluation of Cu-SiO2 Aerogel Catalyst in Methanol Steam Reforming [Volume 11, Issue 3, 2014, Pages 37-44]
Youssef, A. Thermal Conductivity of Water Based Nanofluids Containing Decorated Multi Walled Carbon Nanotubes with Different Amount of TiO2 Nanoparticles [Volume 12, Issue 1, 2015, Pages 30-40]
Z
Zabihi, F. Measurement and Correlation of Ibuprofen in Supercritical Carbon Dioxide Using Stryjek and Vera EOS [Volume 7, Issue 4, 2010, Pages 42-49]
Zabihollahpoor, A. Assessment of effective factors on bacterial oxidation of ferrous iron by focusing on sweetening natural gas [Volume 15, Issue 1, 2018, Pages 18-34]
Zadghaffari, R. A Study on Liquid-liquid Mixing in a Stirred Tank with a 6-Blade Rushton Turbine [Volume 5, Issue 4, 2008, Pages 12-22]
Zahedipoor, A .R. Reverse osmosis desalination using thin film composite polysulfone-zinc oxide mixed matrix membrane [Volume 20, Issue 1, 2023, Pages 67-77]
Zaheri, M. The Experimental Study of Effective Parameters on Mean Drop Size in a Mixer-Settler [Volume 8, Issue 1, 2011, Pages 38-45]
Zaheri, P. The Experimental Study of Effective Parameters on Mean Drop Size in a Mixer-Settler [Volume 8, Issue 1, 2011, Pages 38-45]
Zakeri, A. Solvent Extraction of Zinc from Acidic Solution Obtained from Cold Purification Filter Cake of Angouran Mine Concentrate Using D2EHPA [Volume 8, Issue 3, 2011, Pages 43-47]
Zakeri, Ali Kinetics investigation of cell growth, xanthan production and sugar cane molasses consumption by Xanthomonas campestris [Volume 12, Issue 4, 2015, Pages 84-92]
Zakeri, M. Incorporation of Metal Oxide on Mica Flakes as a Green Pearlescent Pigment: Preparation and Analysis [Volume 17, Issue 2, 2020, Pages 34-43]
Zakhireh, S. High-Performance Hydroxyapatite Scaffold Combined with Selenium and Reduced Graphene Oxide for Bone Regeneration Applications [Volume 19, Issue 1, 2022, Pages 66-76]
Zamani, M. Reverse osmosis desalination using thin film composite polysulfone-zinc oxide mixed matrix membrane [Volume 20, Issue 1, 2023, Pages 67-77]
Zamani, Maede Influence of Polyethylene Glycol on the Morphology and Mechanical Properties of the Eco-Friendly Blends of Polylactic Acid [Volume 22, Issue 2, 2025, Pages 45-64]
Zangouie, M. Study of the Industrial Wastewater Treatment by a Membrane Bioreactor (MBR) Case Study: Cookie Factory Wastewater [Volume 17, Issue 3, 2020, Pages 74-84]
Zare Aliabadi, H. An Experimental and Theoretical Investigation on Thermal Performance of a Gas-Liquid Thermosyphon Heat Pipe Heat Exchanger in a Semi-Industrial Plant [Volume 6, Issue 3, 2009, Pages 13-25]
Zarei, M. A. An Empirical Correlation to Predict the Ignition Delay Time for Some Hydrocarbon Fuels [Volume 13, Issue 1, 2016, Pages 84-97]
Zarei, M.A. Optimizing of Synthesis of High Purity HMX Using Polyphosphoric Acid by Response Surface Method [Volume 20, Issue 2, 2023, Pages 50-61]
Zarei, T. Experimental study of hydrodynamic characteristics of improved sieve tray with push valves [Volume 14, Issue 1, 2017, Pages 40-51]
Zarghami, R. Modeling of Vibration of a Fluidized Bed Cylindrical Shell [Volume 10, Issue 2, 2013, Pages 67-80]
Zarghami, R. Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube [Volume 17, Issue 3, 2020, Pages 85-97]
Zarghami, R. Effect of Isopropanol on the Fluidization of Hydrophilic Titanium Nano-Powder [Volume 19, Issue 2, 2022, Pages 51-67]
Zarghami, Reza Investigation of Solid Mixing in a Spherical Triaxe Mixer Using the Discrete Element Method [Volume 22, Issue 2, 2025, Pages 12-34]
Zarinejad, M. Comparison between to versions of the SAFT EOS in the study of PVT and VLE phase behavior of pure polymer melts and binary polymer solutions [Volume 3, Issue 2, 2006, Pages 33-51]
Zarrabi, M. Degradation of Azo Dye Reactive Black 5 and Acid Orange 7 by Fenton-Like Mechanism [Volume 7, Issue 1, 2010, Pages 87-94]
Zebarjad, S. M. Thermal Conductivity of Water Based Nanofluids Containing Decorated Multi Walled Carbon Nanotubes with Different Amount of TiO2 Nanoparticles [Volume 12, Issue 1, 2015, Pages 30-40]
Zeinali, F. Adsorption of Volatile Organic Compounds from Aqueous Solution by Granular Activated Carbon (GAC) in Batch System [Volume 8, Issue 4, 2011, Pages 50-56]
Zeinali Heris, S. CuO/ Water Nanofluid Heat Transfer Through Triangular Ducts [Volume 9, Issue 1, 2012, Pages 23-32]
Zeinali Heris, S. Theoretical and Experimental Study of Falling- Cylinder Rheometer [Volume 1, Issue 2, 2004, Pages 19-27]
Zeynali, M. E. Effect of operating conditions on divinylbenzene production in diethyl benzene dehydrogenation reactor [Volume 15, Issue 4, 2018, Pages 93-104]
Zheng, J. Study of Flow Behavior of Ultrafine Particles Agglomerations in the Riser [Volume 10, Issue 1, 2013, Pages 55-66]
Zhu, X. Study of Flow Behavior of Ultrafine Particles Agglomerations in the Riser [Volume 10, Issue 1, 2013, Pages 55-66]
Ziaei Rad, Z. Biological Conversion of Normal Chain Octadecane by Native Microbial Consortia [Volume 12, Issue 2, 2015, Pages 50-58]
Ziarifar, Amir Simulation, Control and Experimental Analysis of 1,3Butadiene Purification Unit [Volume 13, Issue 4, 2016, Pages 33-45]
Zinatizadeh, A. A. Application of response surfase methodology for the optimization of Cu and Zn removals by sorption on pre-treated oil palm fround [Volume 3, Issue 2, 2006, Pages 73-84]
Zivdar, M. Modeling and Simulation of a Divided Wall Column for 1,3 Butadiene Purification [Volume 12, Issue 1, 2015, Pages 60-67]
Zivdar, M. CFD Simulations of Pressure Drop in KATAPAK-S Structured Packing [Volume 2, Issue 2, 2005, Pages 64-71]
Zokaie, N. Extension of Trout Fish Shelf Life by Ozone Treatment [Volume 8, Issue 1, 2011, Pages 14-19]
Zoveidavianpoor, M. Drilling Stuck Pipe Prediction in Iranian Oil Fields: An Artificial Neural Network Approach [Volume 7, Issue 4, 2010, Pages 29-41]
Zoveidavianpoor, M. A Successful Experience in Optimization of a Production Well in a Southern Iranian Oil Field [Volume 6, Issue 2, 2009, Pages 37-49]
Zuhairi Abdullah, A. Simple Kinetic Modeling of Selective Reduction of Nitric Oxide in Diesel Exhaust Over Cu-Zn/ZSM-5 Monolithic Catalyst [Volume 7, Issue 3, 2010, Pages 74-80]